I'm using the EXIT_SAPLV56U_004 for my user exit of transaction VT02N
Hi all,
In the function module EXIT_SAPLV56U_004 .There are I_XVTTK Shipment Headers (Current), (old).....
so which table i have to use according to my requirement for further coding in that function module...
Thanks & Regards,
Santhosh kumar.R
Hello,
Please put a break point in the code of exit and see the value flowing into the exit field under different scenarios..you will be able to understand the population of fields ...when they will occur
This way the data credibility can be assured..Pls try if it can be used
Regards
Byju
Similar Messages
-
Problem in triggering the code for CO02 User Exit
Hi,
I am using the code for the Tcode CO02 (User Exit) and i am facing a problem that when i am using the code as a normal program it is executing fine and displaying the pop up window and showing the data in it.
But when i am using that code in the USER EXIT code it is not trigerring that pop up window.
I am using the enhancement:-
*PPCO0007 * - Exit when saving production order
And the include in which i am writing the code is :-
INCLUDE ZXCO1U06
plzz provide me guidelines for solving this problem.hi ,
i am using the following: -
Enhancement No. -> PPCO0007 (Exit when saving production order)
When i click on the enhancement the following is displayed:-
Function exit -> *EXIT_SAPLCOZV_001 *
When i double click the function exit the code i had written in the following include:-
INCLUDE ZXCO1U06
plzz tell me whether i am doing it right or worng? -
What is the name of the table for finding user exit !
What is the table name to find the user exit !
Hi,
Goto to the table tstc and enter the transaction code for
which u want to find out the User-Exits. Check out the
program name from the result. Goto SE38 and dee that
program in display mode. Then search for the string Call
Cutomer-Funtion. All the result of search are the user
exits defined there for that transaction.
SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
So, if you are in some include, you can use where-used-list to get to the function module name. Then you find the SAP enhancement name from the MODSAP by supplying the function module. And finally, you find the customer enhancement projects by querying the MODACT with the SAP enhancement in the field MEMBER.
cheers,
vasavi.
kindly reward if helpful. -
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement. -
Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Create a work order using the BAPI for IW31
Hi,
I want to create a work order using the BAPI for IW31 tr. can any one help me with the program description.
Full points will be awarded for the useful answers.
Thanks and regards,
Sunilhi,
first use fm "bapi_po_create".
then use fm "BAPI_ACC_GL_POSTING_POST"
The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM). -
NPS: Event 6274 - Network Policy Server discarded the request for a user
Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/05/2014 8:47:58 a.m.
Event ID: 6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID: NULL SID
Account Name: host/DPC0387.domain.local
Account Domain: DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 3c-xx-xx-xx-xx-xx
Calling Station Identifier: 00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address: 10.nnn.nnn.nnn
NAS IPv6 Address: -
NAS Identifier: ND246
NAS Port-Type: Ethernet
NAS Port: 71RADIUS Client:
Client Friendly Name: Network Device Management Subnet
Client IP Address: 10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: NT147.domain.local
Authentication Type: -
EAP Type: -
Account Session Identifier: 384F322E317838316564303034313030306230666632
Reason Code: 1
Reason: An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No. Time Source Destination Protocol Length Time from request Info
1 0.000000 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
2 2.470423 Universa_xx:xx:xx Nearest EAPOL 60 Start
3 2.472870 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
4 2.539416 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
5 2.544206 Universa_xx:xx:xx Nearest EAPOL 60 Start
6 2.548804 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
7 2.550050 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
8 2.552597 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=249, l=208)
9 2.556043 10.NPS_Server 10.switch RADIUS 136 0.003446000 Access-Challenge(11) (id=249, l=90)
10 2.565876 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
11 2.569472 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=250, l=208)
12 2.572566 10.NPS_Server 10.switch RADIUS 136 0.003094000 Access-Challenge(11) (id=250, l=90)
13 2.580254 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
14 2.586544 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
15 4.564841 Universa_xx:xx:xx Nearest EAPOL 60 Start
16 4.568530 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
17 4.569876 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
18 4.582263 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=252, l=208)
19 4.586006 10.NPS_Server 10.switch RADIUS 136 0.003743000 Access-Challenge(11) (id=252, l=90)
20 4.591896 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
21 4.592692 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
22 4.599634 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=253, l=315)
23 4.600887 10.NPS_Server 10.switch IPv4 1518 Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
24 4.609920 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 1514 Server Hello, Certificate, Certificate Request, Server Hello Done
25 4.610516 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
26 4.617407 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=254, l=216)
27 4.618352 10.NPS_Server 10.switch RADIUS 288 0.000945000 Access-Challenge(11) (id=254, l=242)
28 4.623650 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 176 Server Hello, Certificate, Certificate Request, Server Hello Done
29 4.643316 Universa_xx:xx:xx Nearest TLSv1 361 Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
30 4.649607 10.switch 10.NPS_Server RADIUS 601 Access-Request(1) (id=255, l=555)
31 4.656950 10.NPS_Server 10.switch RADIUS 199 0.007343000 Access-Challenge(11) (id=255, l=153)
32 4.662734 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 87 Change Cipher Spec, Encrypted Handshake Message
33 4.681106 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
34 4.788536 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=2, l=216)
35 4.789735 10.NPS_Server 10.switch RADIUS 173 0.001199000 Access-Challenge(11) (id=2, l=127)
36 4.795723 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 61 Application Data
37 4.796372 Universa_xx:xx:xx Nearest TLSv1 93 Application Data
38 4.802368 10.switch 10.NPS_Server RADIUS 331 Access-Request(1) (id=3, l=285)
39 4.803363 10.NPS_Server 10.switch RADIUS 189 0.000995000 Access-Challenge(11) (id=3, l=143)
40 4.808905 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
41 4.809501 Universa_xx:xx:xx Nearest TLSv1 77 Application Data
42 4.817342 10.switch 10.NPS_Server RADIUS 315 Access-Request(1) (id=4, l=269)
43 4.822986 10.NPS_Server 10.switch RADIUS 189 0.005644000 Access-Challenge(11) (id=4, l=143)
44 4.828973 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
45 4.833318 Universa_xx:xx:xx Nearest TLSv1 829 Application Data
46 4.840610 10.switch 10.NPS_Server RADIUS 1073 Access-Request(1) (id=5, l=1027)
47 4.845946 10.NPS_Server 10.switch RADIUS 189 0.005336000 Access-Challenge(11) (id=5, l=143)
48 4.850938 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
49 4.907924 Universa_xx:xx:xx Nearest TLSv1 141 Application Data
50 4.913390 10.switch 10.NPS_Server RADIUS 379 Access-Request(1) (id=6, l=333)
51 4.917535 10.NPS_Server 10.switch RADIUS 221 0.004145000 Access-Challenge(11) (id=6, l=175)
52 4.922877 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 109 Application Data
53 4.923472 Universa_xx:xx:xx Nearest TLSv1 61 Application Data
54 4.930319 10.switch 10.NPS_Server RADIUS 299 Access-Request(1) (id=7, l=253)
55 4.937348 10.NPS_Server 10.switch RADIUS 381 0.007029000 Access-Challenge(11) (id=7, l=335)
56 4.942543 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 269 Application Data
57 4.944791 Universa_xx:xx:xx Nearest TLSv1 125 Application Data
58 4.951408 10.switch 10.NPS_Server RADIUS 363 Access-Request(1) (id=8, l=317)
59 4.954022 10.NPS_Server 10.switch RADIUS 355 0.002614000 Access-Accept(2) (id=8, l=309)
60 4.981482 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Success
61 32.590347 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
62 62.592420 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
63 92.595043 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
64 122.597856 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
65 152.600618 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012? -
What is the password for 'oracle' user created during XE installation?
Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
NHi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N -
Seeding the cache for all users
We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ?We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ? -
GLOBAL TEMPORAY TABLE with the ability for a user to see others's entries
I have a list of record available for many user at the same time for them to work on.
Every one has the tendency to chosse the first record...
I want each of the users to be able to chose a different record once the preceding record has been selected by another user.
It would have been somthing like a GLOBAL TEMPORAY TABLE but with the ability for every user to see others records
so I would do and anti-join...
Does anyon have an idea on how I could implement such a behavior?You will not be able to use a global temporary table for such a requirement.
It sounds like you will need a permanent table, which you will need to lock certain records (prohibiting users from taking those already in use), you can look at using the DBMS_LOCK package for this.
That's just speculation based on what you've typed, if you provide more details you make get more specific help. -
Mounting drives on the desktop for all users
Hi
Is there a way of mounting drives ( like USB pens) on the desktop for all users please?
It's a causing a lot of confusion here... you think the USB drives aren't working when you can't see them being mounted in front of you.
I do realise you can set this in Finder/Preferences but I wondered if there were a way of just making it the default for any user that logs in ( whether locally or to the domain).
Thanks for your assistance.micromike wrote:
Thanks for your help Barney.
Hmmmm....why would anyone disable this basic thing?
Here's a reason. I don't use the Desktop, so why would I want the drives to pop up on my desktop.
They appear in my Sidebar in any Finder window.
That's why I turned it off on my system. You'd have to ask the 1000 users why they turned it off.
However, I'm not sure I understand what you want. If you mount a usb drive on your system, and share it out over the network, it is not a Hard Drive on any network user's desktop. It is a network share. -
Hi,
I'm a beginner in LCDS.
I have a MySQL database for my ordering system. In this database there is a user table and there are some other tables. These tables use foreign keys of user.id. People can register on my sytem (+1 row in a user table). I communicate throught web services in my mobile application. People can see only their own rows (own orders) (it is defined by the user.id).
I would like to improve my mob.app. with offline, sync, and real time changings features.
Can I use the LCDS for my system?
Thanks+information:
Server: Apache Tomcat 7
Web Services: Java WS, and it is protected with Custom Basic Authentication. The session contains user.id after the successful authentication. -
6274: Network Policy Server discarded the request for a user
How to reproduce this event:
6274: Network Policy Server discarded the request for a userHello,
according to the following just use an older RADIUS client version:
Warning: NPS discarded the request for a user
This monitor returns the number of events when the Network Policy Server discarded the request for a user.
Type of event: Warning. Event ID: 6274.
This condition occurs when the NPS discards accounting requests because the structure of the accounting request message that was sent by a RADIUS client does not comply with the RADIUS protocol. You should reconfigure, upgrade, or replace the RADIUS
client.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights. -
Is the price for multi user 89.99 per year? How is it installed by each user?
Is the price for multi user 89.99 per year? How is it installed by each user?
Hi cclark,
An Adobe PDF Pack subscription is tied to an Adobe ID, so it's a single-user subscription. There's nothing to install; you access the subscription by logging in via a web browser to https://cloud.acrobat.com using your Adobe ID and a password.
I hope that answers your questions.
Best,
Sara -
Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?
Allan was somewhat incomplete in his statement. While technically it would be possible, from a licensing standpoint you need one license for each iPad unless those iPads were all going to be used by the same person (which I think unlikely given your described use). Here are the relevant terms of the iTunes Store agreement (emphasis mine):
"(ii) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license."
So you would legally need to purchase one copy of the app for each iPad, something which would require an iTunes Store account for each iPad. For normal purchases, each iTunes Store account would need an associated credit card or prepaid iTunes card.
The Volume Purchase Plan works similarly - you still need one license and one iTunes Store account for each iPad - but the purchasing is centralized so you don't get billed multiple times. You get one recemption code for each license you purchase. See:
http://www.apple.com/business/vpp/
Regards.
Maybe you are looking for
-
hello Gurus. we want to down payment against asset Purchase order using F-48. during Simulate the Document we get the following error. Account 26318501 is not a reconciliation account Message no. AU138 Diagnosis Processing terminated because account
-
I have successfully installed itunes 10, then get an error message that reads, itunes was not installed correctly Error 7 (Windows error 127)
-
How to connect to wi-fi when WEP key is not compat...
i am using the nokia 93001 communicator and i have wi fi access point in my office but iam not able to connect to the access point because the phone supports 40 or 104 bit key lenth and my office router has 64 bit key so kindly suggest how to rectify
-
I converted the FCP project to "MPEG-2" in Compressor like a lot of you recommended. The video played well, but there was no sound. Did it not convert audio? How can I include the audio? What setting do I have to use in Compressor so I can convert my
-
hello friends please tell me if i apply sort condition in sorted table what will happen whether it show some kind of error or it run or anything else. thanks...