I'm using windows live mail as my default, when I click file, send link, the proper mail window opens but the link is not highlighted in blue and cannot be opened by recipients

The link that shows up in the e-mail I send cannot be opened, there is no hyperlink I believe.

There is usually a toolbar button in the editor to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each.
* Make Link - https://addons.mozilla.org/firefox/addon/142

Similar Messages

Windows Mail wont bring up compose message when you click file send link in firefox

When I click "send link" under file in Firefox 3.6 Windows Mail will not bring up "compose message" . It just opens Windows Mail without the compose message. All defaults are set and it works fine with IE. Any help would be appreciated. Running Windows 7 64

There is usually a toolbar button in the editor to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each.
* Make Link - https://addons.mozilla.org/firefox/addon/142

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Yesterday, since I downloaded the lastest version 3.6.6, every time firefox opens and when I click on something, I get multiple error windows that say "ERROR: Security Manager Vetoed Action. I can't hardly use if anymore because of all the window pop-ups

Yesterday, since I downloaded the latest version 3.6.6, every time firefox opens and when I click on something, I get multiple error windows that say "ERROR: Security Manager Vetoed Action". I can't hardly use if anymore because of all the window pop-ups. What can I do? Can I go back to an older version?
== This happened ==
Every time Firefox opened
== I downloaded version 3.6.6 yesterday

hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

I downloaded the latest Adobe Reader when prompted. Since then I cannot use Safari File Print to print web pages - the printer dialogue window opens but the page is blank. Also, when I try to use the safari Help button,the dialogue box is blank.

I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Since I downloaded Apple's latest operating system, whenever I try to open Illustrator I get a message that I need to install legacy Java SE6 runtime and to click "more info" to do this. When I click "more info" I get a blank window. What should I do

Since I downloaded Apple's latest operating system, whenever I try to open Illustrator I get a message that I need to install legacy Java SE6 runtime and to click "more info" to do this. When I click "more info" I get a blank window. What should I do

Hi,
I had the same problem after upgrading to Yosemite. Illustrator CS6 wouldn't open. I got a message saying I should 'install legacy Java SE6 runtime'.
The link didn't work - it lead to a blank page.
So I downloaded Java8 (latest version) from Oracle but didn't install it. Something told me this was not the right way to go (the problem was with Java SE6, not 8). I then called Apple (in the Netherlands, were I live) for help. I got none. The best they could do was blaming Adobe for the problem or me, for not having the latest Adobe CC app. Rubbish.
And then, magic. I tried to open Illustrator again, got the pop up message but this time the link worked. It took me to an official Apple page, with a link to download Java for OS X 2014-001. The problem is now solved.
If curious, this is the explanation Apple gives for the problem:
'Java for OS X 2014-001 includes installation improvements, and supersedes all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005. On systems that have not already installed Java for OS X 2012-006 or later, this update disables the Java SE 6 applet plug-in. To use applets on a web page, click on the region labeled 'missing plug-in' to download the latest version of the Java applet plug-in from Oracle.'
See http://support.apple.com/kb/HT6133 for more details about this update.
See http://support.apple.com/kb/HT1222 for information about the security content of this update.

Using JDIC opens Outlook But When I click on send email email does not send

Hi to every one plz help me.
I have used JDIC and when i open outlook through Desktop.mail(message);
outlook express gets open but when i click on send email then email does not get send undelivered message comes even though i have tried to send the email on the same address by manually opening outlook with coding then there is no problem for sending email.
here is the error come in inbox after pressing send button.
Your message did not reach some or all of the intended recipients.
      Subject:     COSMOS
      Sent:     9/15/2008 2:12 PM
The following recipient(s) could not be reached:
      '[email protected]' on 9/15/2008 2:12 PM
            None of your e-mail accounts could send to this recipient.Thanks
ABid

by using SMTP before email address problem solved
SMTP:[email protected]
but is there any other way to solve this problem please reply me thanks.

After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
Any suggestions much appreciated!

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

Cannot "print" a window as pdf then read it in Adobe Reader; Adobe says the file is damaged and cannot be opened.

Running Firefox 4.0 on an Intel Mac OS 10.5.8. Same problem with Firefox 3.6.16. You can save a Firefox window as a pdf file by using the File dropdown menu and selecting Print. Under Print, you can select PDF, then Save as PDF or Save as Adobe PDF. Firefox will save the file. If you try to open the file you get an error message that the file is damaged and cannot be opened. I did not have this problem in Safari; I followed the same procedures and the pdf file opened fine in Adobe Reader. Why is Reader rejecting the pdf file produced by Firefox when it did not reject the pdf file produce by Safari?

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I am trying to install Adobe Creative Suite CS2 and I am at the last stage of installation but the pop up window is asking that I insert CD

I am trying to install Adobe Creative Suite CS2 and I am at the last stage of installation but the pop up window is asking that I insert CD #2 but, of course, there is no cd! I tried clicking okay and double clicking the image for CD #2 or file #2 but nothing works - Help!

CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

Using 'Edit in' - Photoshop CC 2014, the program opens, but the file doesn't appear. Help!

I have Adobe CC Photography (great value!). I need to do some Photoshop editing of my pictures - principally Levels 0 and so use the 'Edit in' functionality.
This has worked in the past; but today, Photoshop opens, but the file doesn't appear in the PS window.
I uninstalled (using MacKeeper) a copy of Photoshop Elements 12 on my hard drive recently - could that be the cause? In any case, how do I get back to being able to 'Edit in'?
Hugh

Edit In doesn't work in Lightroom 5.5 from Photoshop CC 2014

In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestion

In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Yosemite, messages, preferences are grayed out. It opens but the window for messages is blank.

Yosemite, messages, preferences are grayed out. It opens but the window for messages is blank. Can't click on anything.

Hi,
You appear to have the wrong end of the stick as they say.
Just starting your computer needs certain Fonts to be present to display the text you are likely to see.
Most of those needed to do this are in the Hard Drive icon/System/Library/Fonts.
Some apps require different Fonts and in the case of Messages this is AppleGothic (all one word) and is found in Hard Drive/Library/Fonts.
You would normally use the Apple App called Font Book to check these Fonts are working properly.
Prior to the Yosemite version of Messages (still called Messages 8 like th Mavericks version) you could change the Font use in the actual Messages in the app.
On a Character or word or Sentence basis there was the Format Menu.
There was also a Pane in th Preferences called Messages that let you choice the Font, the colour of the text and the colour of the balloons for Out going Messages and also Overriding the incoming ones.
You can no longer do this as the Preferences Pane and the Format Menu have gone.
7:20 pm Thursday; December 11, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I'm using windows live mail as my default, when I click file, send link, the proper mail window opens but the link is not highlighted in blue and cannot be opened by recipients

Similar Messages

Maybe you are looking for