I-MAC has the grey screen on start up, then shuts down after trying to load (bar shows 30%).

Shutdown my I-mac and next morning the grey screen appears with a loading bar which gets to 30% and then i-MAC shutsdown. Went into Utilities and it shows my files etc. but the verify and the repair disk have not corrected the issue(s).
What else can I do before I take it to the apple support. I live in Brunei and past history suggests that the Apple Support will just erase everything on the drive and I will lose the lot. I just want the photos and my own CD loaded music.
Any suggestions would be welcome.

Look at this: http://support.apple.com/kb/ts2570

Similar Messages

  • Hi my desktop starts and then shuts down after the apple logo and an oblong box appear.thanks

    hi my mac
    desktop starts then shuts down after displaying the apple logo and an oblong box.
    thanks

    Sounds like something is badly wrong with your system.  First step would be to start up from your Mac OS X install disk, by inserting the disk and holding down 'c' at startup.  Select your language, then choose Disk Utility from the Utilities menu.  In Disk Utility, choose your hard drive and click the Repair Disk button.
    If problems are repaired, try restarting and see if the problems are gone.
    If problems couldn't be repaired, you can try DiskWarrior, which can sometimes repair problems that Disk Utility cannot.  However, if nothing works, you probably are going to have to erase the hard drive and reinstall the system from scratch.  Hopefully you have backups!
    If there were no errors, or they were repaired successfully but that didn't fix the problem, then you should try booting into safe mode by holding down the shift key at startup.  If that works, you may have some bad third-party software.  What that might be is hard to say, though.
    If nothing works, try rebooting from the Mac OS X install disk again and install Snow Leopard right on top of your current system.  That shouldn't disturb your apps or data, but of course, if you don't have backups, you're in trouble if something goes wrong.

  • My macbook pro has the grey screen of death.... i have tried a few things to get it re started.... it is not backed up and i really dont want to loose everything on it :(

    MacBook pro has grey screen of death, it all began when I tried to install something new last night like my laptop asked and when it went to restart, it went grey....
    tried start up in safe mode and nvram/pram
    on safe mode it said ' the volume macintosh hd could not be repaired '
    My MacBook has not been backed up and it would be heart breaking if I lost everything from it...
    can anybody help?!!!
    Message was edited by: lolaroseuk

    Be prepared for a broken heart...
    It's obvious that you need a new drive - when you purchase one you should also purchase a USB enclosure for your old drive and connect that drive to your machine to see if you can rescue any data from it. You may have to purchase a utility such as Data Rescue 3 or DiskWarrior (each $100) to facilitate restoring some of your data.
    And start a couple of backup schemes... when you can't afford to lose data, a couple of backup schemes can help.
    Clinton
    MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Powerbook starts up. then shuts down after a few seconds

    Help!
    My powerbook starts fine boots the system. gets as far as when the system shows the right hand dropdown menus then blacks out. some times the screen flickers first. It then will not start again unless I reset the PMU. then It starts fine only to repeat the problem.
    I have tried it with another adapter, and its the same.
    I've tried several PMU resets, and pram reset. unplugged it for several hours with he battery out programmmers button etc. But the problem persists.
    Any suggestions are welcome

    Help!
    My powerbook starts fine boots the system. gets as
    far as when the system shows the right hand dropdown
    menus then blacks out. some times the screen flickers
    first. It then will not start again unless I reset
    the PMU. then It starts fine only to repeat the
    problem.
    I have tried it with another adapter, and its the
    same.
    I've tried several PMU resets, and pram reset.
    unplugged it for several hours with he battery out
    programmmers button etc. But the problem persists.
    Any suggestions at all are welcome
    further to my first description, the powerbook will run start up of the battery the go to permanent sleep after a few minutes.
    also and wierdly, its will run ok with the power plugged in for as long as the battery charge lasts. Then it does something similar to sleep. but without thesleep light.
    I'm am really scratching my head here.
    Any feedback would be gratefully recieved

  • I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS.  Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

    I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
    I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
    I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • AFTER UPDATE GREY SCREEN NO SOUND THEN SHUTS DOWN AFTER 30  SECONDS PLEASE HELP

    AFTER UPDATE GREY SCREEN APPEARS WHEN POWER BUTTON PRESSED NO START UP SOUND THEN SHUTS DOWN AFTER 30  SECONDS AND REPEATS ITS SELF PLEASE HELP

    As for now, only thing that helped was an archive and install with preserve user settings. Seems after the reinstall of 10.4. everything that was weird has become normal again. I hope very much this state stays on for a while - or ever!
    A comment to everybody: with problems that are common you get a lot of help from friendly users in here, but if like in my situation things get a bit more uncommon than the usual querks and troubles your bound to go through a whole workflow of tests and algorithms - i did learn some new things but eventually I had to go for the ultimate - the reinstall (of course, erase and install would have been more work.) and it's frustrating not to find out how it came to this problem. I wish I could nail it down to something I did mistakenly - i guess I'll find out next time.
    THANKS THOUGH to those who replied.
    Keywan

  • Older model iMac.  Grey screen, no tones, apple logo and spinner, then shuts down.  Tried all greyscreen tips on Apple Website.  Suggestions?

    Older model iMac.  Grey screen, no tones, apple logo and spinner, then shuts down.  Tried all greyscreen tips on Apple Website.  Do not have start up disc.  Do not know what OS it runs.  Suggestions?

    Since you don't have a startup disc you haven't done ALL of the tips on this page http://support.apple.com/kb/TS2570
    I don't know what you've done but you need to follow the tips listed and that could include possibly erasing and reinstalling the OS. Older model iMac does nothing to help us understand what you're working with. You can call Apple and provide them with your serial number and for a fee they'll ship you a set of original install discs or you could possibly use Snow Leopard which you can get for $20 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    You can enter the serial number here for specs on the iMac http://www.everymac.com
    And if you don't know where to find the serial number see here http://support.apple.com/kb/HT1349

  • Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it

    Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.

    Without proper system information and the application logs nobody can tell you much.
    Troubleshoot Creative Cloud download and install issues
    Mylenium

  • When I start my MacBook I get a gray screen, I've tried safe start and it sounds like it's going to start and then shuts down. Any suggestions?

    When I start my macbook I get the gray screen and gear. I've tried to safe start it and it sounds like it's going to start but then shuts down. I don't have any other products connected to it. Any suggestions?

    Did you recently install any updates?
    Do you have your original install discs?
    ~Lyssa

  • G4 MDD FW800 starts up and shuts down after several seconds

    Hi all,
    My G4 MDD FW800 DP.1,48 starts up and shuts down after about 20 seconds. I Have reset PMU and checked battery voltage, witch was OK. (also had it out for 30 minutes with no power connected etc.) I have video and also tried with NOTHING connected. But still it just powers down and failes to enter start up procedure.
    Last time I had it running I pulled my iPod, beacause the computer did't see it, the next thing I saw on screen was the message to hold the power button for 5 to restart, after that I got the problem described above.
    Anybody?
    Thanks,
    G4 MDD FW800 DP1,48 Mac OS X (10.4.2)

    Hi, I don't know how fast it shuts down, but...
    How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/ht1379
    In fact, do 3 in a row, takes a bit of time.
    Does it boot into Open  Firmware with CMD+Option+o+f ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)

  • Slow start up and shut down after Zenworks installation

    I hope someone can help me out on this one. Not sure if I am posting the
    right forum or not but here we go. After I installed Zenworks on our PC's
    here at work, we have a noticed a distinct difference in how long it takes
    for the PC's to start up and shut down. Before installation, everything
    was very quick, like it should be. Now it seems to take some users 3-5
    minutes to start and shut down their PC's. The machines are running
    several different OS'es. Windows 98SE, Windows XP Pro SP1 and Windows XP
    SP2. No one OS has more problems than the other. Has anyone heard of
    Zenworks causing this issue or heard of a way to prevent this? I would
    really appreciate any help you can provide.
    Thanks!
    Jami Benson

    On Thu, 20 Dec 2007 09:12:26 GMT, Rolf Lidvall wrote:
    > See this article by Shaun Pond:
    > "Using Search Policies Effectively in ZENworks"
    > http://www.novell.com/coolsolutions/feature/15294.html
    I would also suggest to get either some training or self study material or
    read the online documentation
    Marcus Breiden
    If you are asked to email me information please remove the - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.didas.de

  • Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss....

    Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss..

    The startup disk may need repairing.
    Startup your Mac while holding down the Command + R keys so you can access the built in utiliites to repair the startup disk if necessary or restore OS X using OS X Recovery

  • Ipad will not start up, keeps shutting down and trying to restart, computer will not recognize device to restore.

    ipad will not start up, keeps shutting down and trying to restart, but never gets past the apple logo.  The computer will not recognize it as a device that is connected to try and restore. 

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

    My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

    You may have to restore your phone to correct the problem.

  • My macbook pro laptop has a grey screen at start up and doesn't boot up all the way

    to whom this may concern, i have a macbook pro and the computer on startup has a grey screen i get the apple symbol and a status bar but as the status bar is filling it only fills 1/3 of the way and the computer shuts down i tried turning back on several times and have had no luck. what could be the problem ?

    mr.edsr wrote:
    Where is the SMC located  and how is this done?  Thank you!
    Please read this link:
    http://support.apple.com/en-us/HT201295
    Ciao.

Maybe you are looking for

  • Palm Pre: Problem with e-mail app

    I've had my Palm Pre since release day.  I have two e-mail accounts: Yahoo! and a Roadrunner account.  I've never had a problem until last Thursday.  I didn't change any settings, but all of a sudden my e-mail won't work correctly.  SOMETIMES I get t

  • Petstore development tools

    Can someone tell me what tools were used to develop PetStore?? I know J2EE, and JSP, and all that other Java fluff, but I'm talking about what actual application tools were used to put it all together. Was Forte Enterprise Edition used or something?

  • How can I track my lost 3G iPhone without a tracking device on it?

    Please Help!! I had my phone stolen and I dont have a tracking device on it. Is there any way of finding it with just the serial number?

  • Regarding XK02 transaction in SAP ECC 6.0 Version

    Hi All, I am working with an object which calls a transaction <b>XK02</b> to modify the name and contact details fields in  Version <b>SAP ECC 6.0</b>. The problem is that, when the transaction is run manually and saved or when an SHDB Recording is c

  • Set parameters for dynamic selection report

    Hi all, Please find below code.. parameters KS7 and KS8 are on static slection parameter and GJR, VPE, BPE are on dynamic selection parameters for transaction KSB2. But, when I run program, values are passing to parameters KS7 and KS8 but not to GJR,