I made a Blurb book through Lightroom 5, on another computer, backed it up on an external hard drive and tried to import it into my imac. I got the picture files, but could not get the book I had worked on. How do I find my book?

I made a 'Blurb' book using Lightroom on a computer that was not mine. I backed up the book on an external hard drive and then tried to import the book into my imac. I wasn't able to retrieve my book. The photos I used for the book project are there, but the 45 page book I made is not there.
What do I need to do?

You would need to go to the computer containing the book.
Select the saved book in the Collection panel.
Go to Grid View [ G ] and select all the images [Cmd/Ctrl][A]
File>Export as Catalog and store on media you can use to transfer
Bring this catalog onto your computer
File>Import from another catalog and bring the transitory catalog into your master catalog.
It should bring the images, your collections (including your book) and other settings into your own catalog.

Similar Messages

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

The Applications File Server could not open the file

Hi All,
We have shared appl_top between 2 nodes.
When running concurrent request such as active user report, i got the following error:
The Applications File Server could not open the file oXXXXX.out for read
I have found metalink note
The Applications File Server could not open the file o611681.out for read (Doc ID 1311372.1)
The $APPLCSF are all fine and so are the permissions.
I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?
i thought i can start up all node at the same time.
am i right to say that the last node run adautocfg is the primary node?
Thanks in advance

I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?Do you have PCP implemented? If yes, you do not need to start the CMs on the second node and running adcmctl.sh script on the first node would be enough.
i thought i can start up all node at the same time.What exactly do you start?
am i right to say that the last node run adautocfg is the primary node?Please explain what components are running on each node.
All the URLs Accessing EBS Are Getting Redirected to the Web Node Where Autoconfig Last Ran [ID 1349509.1]
Thanks,
Hussein

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

I tried to down load mountain lion. was charged for the down load but did not get the down load

I coukd not get the mountain lion to down load on my computer.

Ok, we will get through this. But you need to give us a description of what exactly the problem is.

Using Dreamweaver CC 2014.1.1, when I select a set of paragraphs to turn into a Definition List, and select Format - Lists - Definition Lists, I get the dl tags but do not get the dt or dd tags?

I have used this before in earlier versions of DW and it worked fin. I tried tonight with CC 2014.1.1 in either design view or in codeview with the same results. I would select the text from the starting <p> tag to the ending </p> tag, and then in the menu choose Format - List - Definition List and only get the <dl> tags. Anyone else experience this?
Thanks!

That's how it works in CS6, too. And it is not just for definition lists. That is the expected outcome no matter which list type you use. DW doesn't know where the DTs and DDs begin and end because you've highlighted an entire paragraph and asked DW to format it as a DL.
I typically code my own Definition Lists. It's faster.
Nancy O.

Stroring certain details in a file, But Could not delete the File.

I am storing certain details using serialization. But when i decide to delete the File i am unable to delete the File. I am attaching a sample Code to understand my problem.
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.ObjectInputStream;
import java.io.ObjectOutputStream;
import java.io.Serializable;
public class SerialDemo implements Serializable {
public static void main(String[] args) {
    try {
        FileOutputStream f = new FileOutputStream("./test.proj");
        ObjectOutputStream s = new ObjectOutputStream(f);
        SerialDemo d = new SerialDemo(5);
        s.writeObject(d);
        s.flush();
        FileInputStream f = new FileInputStream("./test.proj");
        ObjectInputStream s = new ObjectInputStream(f);
        SerialDemo d = (SerialDemo) s.readObject();
        System.out.println(d.getIndex());
        s.close();
        f.close();
        System.out.println("SerialDemo.getVal() is: " + d.getVal());
      File file = new File("./test.proj");
      System.out.println(file.delete());
    } catch (Exception e) {
      e.printStackTrace();
int test_val = 7; // value defaults to 7
public SerialDemo() {
    super();
public SerialDemo(int x) {
    super();
    test_val = x;
public int getVal() {
    return test_val;
private int idx = 2;
public int getIndex() {
    return idx;
static final long serialVersionUID = -4717603181820250815L;
}

Glad I could help. I recommend you look into using FindBugs, it will warn you of this kind of thing. Also change the way you open/close streams to:
YourStream stream = null;
try {
   stream = new YourStream();
   // read/write from
} finally {
try {
     stream.close();
} catch( IOException ioe ) {
      // Log the IOE. Or use the IOUtils.quiteClose from Commons IO.
}As otherwise you could leave the stream open, i.e. if the read() method throws an IOE.

HT204686 I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I

I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I do?

that must be really annoying !!
so this is what you call
FIND MY IPHONE ACTIVATION LOCK Find My iPhone Activation Lock - Apple Support
when you start using iCloud on any iOS device and enable find my iPhone, this prevents a new user from using it, and also prevents anyone from using the phone
as it is locked to previous owners account ,this is also the case if when a phone is lost or stolen.
the only way around this is to have the previous owner reset their apple id by going to @ applied.apple.com
if they are unable to do this, then the only other way around this is to have the previous owner get a copy of their original receipt and call apple support who can then lift this lock if they get a copy of the receipt
unfortunately there is no quick fix -> the below link explains what you should do before you sell or give away an iPhone
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

HT5012 Could not get the 4G through iphone 5s while my SIM supports it in other devices?!

Could not get the 4G through iphone 5s while my SIM supports it in other devices?!

Hamed.ghabshi wrote:
Using the phone in Oman and my other number working fine with it in 4G!
The phone number and SIM is irrelevant if you get 4G or not.
The phone hardware is what is relevant.
Where is this iPhone originally from?

I am getting the following message "safari could not download the file (440MB) because there is not enough disk space. disk utility says i have 249.8 GB of available disk space. any suggestions as to what is the problem would be appreciated

i am getting the following message "safari could not download the file (440 MB) because there is not enough disk space. please delete files or download to another disk." when i check system information it tells me i have 249.82 GB of disk space available. any suggestions as to what i can do to resolve this problem.

don
thanks for your suggestion. that is the same advice that i got from the geek squad at the local apple store.
i did what he instructed but it did not work. i have since called apple support twice regarding the problem. they had me start the computer in safe mode, going into the library and deleting a phlist file (i think) do a repair disk permissions, do a repair disk, empty the cache, and finally the last guy told me to unplug the computer from the wall socket and restart.
when i mentioned the advice you and the apple store guy gave me they sort of poo pooed it saying that was done when they did all this other stuff.
i am now waiting for the download to be completed to see if unplugging the computer had any effect.
thanks again for your kindness in answering my concern.

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

APD - I'm trying to send a File to AS but 'Could not close the file 'AP_DP'

Dear Expert,
I'm trying to sen a file to Application Server through Analysis Process Design, but the messega that the log show is:
Could not close the file 'AP_DP'; operating system error: 9 (Bad file descriptor)
I have three compoent in the analysis process:
DataSource:
Query
Transformation:
Hidden Column
Aggregation
Data target:
A PC file.
When a activete and execute the file doesn't save in the Application Server.
Please give some advise regarding this case,
Thanks for your time,
Luis

We have authorization problem, restric by OHD technical name.

Security Agent: Could not get the user record from OpenDirectory

Hi,
Two months ago I had to change my SSD due to a damage at the old one. In the Apple shop they installed OS X Lion with a image from their image-server.
After that the Mac was quite slow in booting. With the old SSD (128 GB) booting takes 25 sec now it takes 75 sec.
I tried different things to solve the problem without result. First I asked in the shop, then I googled the problem all with no real solution.
Today now I searched in the log files. I found the following:
09.02.12 11:03:07.861 SecurityAgent: Could not get the user record from OpenDirectory.
09.02.12 11:03:07.861 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
09.02.12 11:03:34.907 SecurityAgent: Could not get the user record from OpenDirectory.
09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
09.02.12 11:03:38.653 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
09.02.12 11:03:58.245 SecurityAgent: User info context values set for andi
09.02.12 11:03:58.246 SecurityAgent: User info context values set for andi
09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
This operation takes 30 secs during the boot process. Can somebody help me, to solve this problem?
Regards
Andreas
MacBook Pro, Mid 2009
2.66 GHz Intel Core 2 Duo
8GB 1067 MHz DDR3
SAMSUNG SSD 830 Series , 256 GB
OS X 10.7.3

cece2bali wrote: "it seems that your mac tries to connect to a server while booting. This action will erase all your network configuration..."
Where can I go to learn more about this 'erasure' of network configuration if the mac tries to connect to a server while booting?
I get the same error message as the OP. My account is an Admin on the machine. It's configured to automatically log in on boot -- except sometimes it fails. It has a login-item which runs a bash script that makes an https request to a nearby machine. Maybe I should make this script sleep a while so the https action happens after the boot sequence is done? (unlike SmashHuevo, my user needs to be an Admin)

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

I made a Blurb book through Lightroom 5, on another computer, backed it up on an external hard drive and tried to import it into my imac. I got the picture files, but could not get the book I had worked on. How do I find my book?

Similar Messages

Maybe you are looking for