I made a iMovie project sent it to iTunes... Where is the file.

I made a movie for a class with my iPhone, and I sent it to iTunes, it says its under sharing. Where is that? how do I get to it

Hi
Trying to get a picture of it.
• Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
• Any other hard disks connected ?
• If so - Formatted as ?
Yours Bengt W

Similar Messages

Moved projects to new disc, get "Where is the File?"

Hi,
I moved from an XP system with PE 7 to Windows 7. That didn't work out well so I upgraded to PE 10 and got the 64 bit version.
On the previous computer, I had my projects on the "E:" drive, a secondary hard disk, and I also had an "F:" disk. On the new one, the only hard disk is the "C:" drive and I put the folders from E and F on C.
So where I had files called:
"E:\Marketing\Video\Project A"
I have:
"C:\E\Marketing\Video\Project A"
InDesign and Illustrator are smart enough to recognize the change and find the links. But not PE. I have to do a search on each file name when it asks where they are, and they are not all in the same folder.
Is there a way to search/replace these links? Or another, easier way? I have lots of projects and don't look forward to fixing all the links one at a time.
Thanks,
Joe

Well, there's a better way to do it than you did it, Joe. If you'd have used the program's Project Archiver feature, you could have moved all your files over without losing the links betwen them.
But oh well.
When you open an old project file for the first time it will ask for help locating the media files. Once you browse to one, the program should see all of the others in that folder and add them automatically. If they're in a bunch of different folders, however, you'll have to track them down one at a time, unfortunately.
BTW, you aren't opening projects created by earlier versions of the program in version 10, are you? That may possibly work if the projects were created in version 9. 9 and 10 are pretty close. But generally, if you open a project created in an older version of the program with a newer version of the program, you get buggy behavior and sometimes total corruption.
So if you're doing that, make sure you keep a copy of the original project file some place so that you can go back to it with an older version of the program is things start going wacky.

HT203180 My video I made on Imovie and sent to Itunes wont sync with my Ipad

My video I made on Imovie and sent to Itunes wont sync with my Ipad.

Hi
If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
• iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
• DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
• Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
• Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
only You can buy from Apple is
• FinalCut Pro-X which also can burn to DVD but without any nice themes.
AppleMan1958
You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
Yours Bengt W

I made a iMovie project and it is not letting me share it on youtube.

I made an iMovie project that is over 15 minutes long and I cannot cut it down at all because it is for a project. It will not let me share it to my Youtube channel and does not show up. Please help.

Clean iPhone charging port very well with toothbrush and small amount of Isopropyl Alcohol.

I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

Hi
Trying to get a picture of it.
• Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
• Any other hard disks connected ?
• If so - Formatted as ?
Yours Bengt W

I previously made an iMovie project, but with the new version of iMovie (10.0.1) it does not have the option to import. How do I retrieve my old iMovie project?

I previously made an iMovie project, but with the new version of iMovie (10.0.1) I cannot import the project. How do I retrieve and import my old iMovie project?

You have to upgrade your iMovie 9 projects from iMovie 10 before you can use them. See:
http://help.apple.com/imovie/mac/10.0/#mov902ad0c31
Geoff.

My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project. Does anyone know of a way to still export this project?

My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project. Does anyone know of a way to still export this project?

jkrijgsman wrote:
Does anyone have a good workaround for burning a DVD from an iMovie project now that iDVD is no longer around?
There's Toast.
http://www.roxio.com/enu/products/toast/titanium/
$79.99
Final Cut Pro X will also burn DVDs.
$299.99
How large is your movie? Is it possible that you could output it as a QuickTime file and then burn that as a data DVD? Is uploading to YouTube an option?
Matt

I made an imovie project that's over 2 hours so iDVD won't let me burn it onto a DVD. What do I do?

I made an iMovie project that's over 2 hours long so iDVD won't let me burn it onto a DVD. What do I do now?

Would I need to switch the disk in the middle of it burning so it can burn the other side
No, you do not flip over the disk. The dual-layers are both on the same side of the disk. You can't see them, they are just there, and iDVD will do what is necessary if it needs to burn both layers.
You would only flip over a disk if it were a "double-sided" disk. That's an entirely different kind of disk and it has only one layer on each side. Those are much older kinds of disks that were used commercially before the advent of dual-layer disks. I don't know anyone who uses them any more.

IMovie crashed, lost project. How do you SAVE in iMovie? Where's the file?

Just spent 4-5 hours building a complicated movie from a year's worth of footage. At some point, iMovie crashed. I think I lost all those hours of creative decision making, since I cannot see the file when I reopen iMovie.
There is no "open" command in the file menu. There is no "save" command in the file menu.
This would imply that Apple was autosaving for me to save me trouble. Hmm. I can save in almost every program I use, and revert, and save versions.
How do you save a project in iMovie? I don't see save in the file menu, as has been the steadfast tradition of Apple applications since I purchased my first Mac in 1984. What in the blazes have you done with SAVE? It is so basic.
Along the same line, where is the project file located on my hard drive? I would like to open it. Since I assume you have been autosaving to somewhere, could you please let me know where my file is saved.
<Edited by Host>

This just appeared to happen to me too. I tried clicking on the file in Movies/iMovie Projects. That didn't work.
Then, I made a copy of the file in a safe place. I noticed it was 2.2 MB, so something had to be in there. Next, I started iMovie and clicked the Project Library arrow. The project was listed there. I opened it and got back most but not all of the work. It lost a lot of my audio changes. Here's the thing. I worked until about midnight, and then left iMovie up and running til noon. You would think it would have autosaved the changes by the time I came back. I suggest making your own copy of the file now and then, just in case.

Combining several iMovie projects into one, time-not space-being the factor

Hello,
Space is not an issue (large external drive), but I'm trying to figure out the fastest way to combine several iMovie projects into one (so each movie will become a chapter in iDVD). I'm pretty sure there must be a better way than I'm attempting, selecting all the clips in clipviewer, then dragging and dropping to the new project clipviewer. As I've done this, the "time remaining" window keeps growing (started out about 4 minutes, climbed to "92 minutes remaining," then I aborted the move). Details: each movie is about 8-10 minutes long, widescreen, made up of various (sometimes many) dv clips, audio segments, still photos, etc.
I have added dv clips to a project via the media folder (project unopened), but this was a single item and simple to move from trash into the project. In this case, I'm not sure what to move in order to save the entire project intact.
Thanks so much for any help,
b
Message was edited by: Bimp

Thanks for your reply, Klaus. I'm just now getting to try your suggestion to copy and paste from timeline rather than drag and drop from clipviewer. Alas, it seems to be choking terribly on the transfer. This video is not a 60 minute movie, either; it's about ten minutes. I has about 60 files to it. I did get to the point where I felt confident enough to empty the trash and save the project, so I assume the clips that are there are not still "attached" to the unedited dvs.
Earlier I tried to export, in the advanced settings, to the full quality dv, but the quality really dropped, way too much for the intended use. I'm pretty much stumped at this point, unless I can hear some other suggestions.
What I might try doing is simply dragging and dropping all the packet contents of the media folder into the other movie's media folder, but then I suspect I'll have to rebuild the darn thing from bits and pieces and it may be like putting Humpty Dumpty back together again...ugh.
I'm sure I'm not the first person to face this challenge, am I? Of course, my lesson learned is to build one dvd's contents in one imovie project. If it weren't for the fact that I need to offer viewers the option to "play movie" (play all the videos as one movie) I'd simply drag each movie into iDVD and do it that way (the dvd showing each video separately).
Would still love to hear of other possible solutions here, before trying some other forum.
thanks!
B

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

When I try to add music from my itunes onto my imovie project, it says "Open iTunes to populate this list." I opened it and nothing happened. Please help.

When I try to add music from my itunes onto my imovie project, it says "Open iTunes to populate this list." When I open it nothing happens. Please help.

It may help to trash the iApps Preferences File.
See instructions here.
https://discussions.apple.com/docs/DOC-4061

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie

I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie and what loads up to youtube is the version prior to this final fix. I have tried fixing it at least twenty times. The open to edit version has the video the way I want but when I upload it to youtube, its not the version I want to show.

Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

Can I migrate an iMovie project to final cut pro and keep the edits intact?

can I migrate an iMovie project to final cut pro and keep the edits intact? It may be a solution to my apparently corrupted iMovie

The manual tells ..
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver41812c7c
keep in mind: just the 'plain cuts', not the eye-candy iMovie offers, wil be transfered.
unfortunately it says ...:
You initiate the process from within iMovie. The project file and the media used in the project are copied to your Final Cut Pro library.
For more information, see iMovie Help.
so, if your iM doesn't work anymore, you can not transfer.
plus, my personal opinion!, I would start from scratch in FCPx...
What issues in iM do you expect FCPX to solve,...?

I made a iMovie project sent it to iTunes... Where is the file.

Similar Messages

Maybe you are looking for