I made a MS patch-changer selecting ANY patch FROM MY KEYBOARD'S KEYS!

Love the Nord Electro 3, hate the sequential up-down button for patch changes, especially with up to 20 per song. Almost decided to sell it and go back to the Nord Stage I had before, sacrificing sound quality for rapid and flexible patch changing abilities, but I just made a MainStage-based patch changer for the Nord Electro 3 that can select any Nord patch from the Nord's keyboard. So Cool! Chances are I keep this beloved Nord now!!!
I've recieved so much help that I'm trying to be a giver here ....though maybe this is rookie stuff to the people here, it was a new level for me, so maybe it'll help someone....
It took a long time to figure out, but I decided finally not to worry about changing various (not sequential) MainStage patches from keyboard keys because I couldn't find a way, but just to make a way to choose NE patches WITH THE Nord's KEYS SENDING WHATEVER PROGRAM CHANGES needed to select a patch no matter where it is in the Nord -- this way I could choose any patch easily from the Nord keyboard keys instead of sequentially stepping through patches with two mapped up/down MS keys, or with the Mac's arrows, or hunting for a computer keyboard button.
I learned the bottom 8 keys of the Nord into 8 buttons in MS, then for each button mapped it to Send to All --> Nord Electro (destination) --> Program Change. Then I "mapped parameter" to whatever Program change number would select the patch where it's sitting in the Nord's patch banks. If it was PC 9 then the values would be 9 and 9. Pressing that keyboard key (F#0 in my case) while playing and having MS in Perform Mode would then switch my Nord to patch 5-B in the Electro, which is the Nord's PC9 location. It was a little tricky to figure out that I best go into the parameter graph and change the top and bottom numbers to 9, in this case. For some reason it defaults to 8 bottom and 9 top if choosing PC 9 outside the graph. It took some mousing sometime to get them the same.
Note: NO patch changer in layout, NO channel strips, JUST the keyboard and the 8 buttons. Also for some odd reason it does NOT work in Edit mode, MS has to be in Perform or Full Screen mode.
Granted, the number of patches you can choose is limited to the number of keyboard keys you want to reserve for this purpose. If I can give up more keys I might do 8 more to get 16 program-changing keys.
Anyway it's great to be able to choose whatever sound I want in the Electro 3 instantly without having to madly push an up/down button on the rig -- organ, Shodes, Mellotron, choir sample, no matter where it happens to reside in the Nord's banks. Cool!
What I couldn't figure out but might do next is to see if there's a way to use this tool, but also choose a MainStage synth patch or three from Program-changing keys without disrupting the works. I tried for a long time but couldn't find a mapping that would send something that would end up giving me a particular PC-mapoped Nord+MainStage layer -- that's probably to much. So I might default to also having a field with a patch changer window, a couple keyboard keys mapped to up/down, and just choosing up or down instead of a particular patch number or name. Dunno.
I can post or e-mail the concert if it helps anyone.
Neil

You may have to call back and tell the answering party you have an
existing open case involving a repair; tell them the 'case number' or
'incident number' assigned your initial repair by AppleCare, and say
if there is a problem, you've already paid; and 'please connect me to
the supervisor.'
A logic board issue could certainly be the cause of bizarre keyboard errors.

Similar Messages

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HR Form do not select any data from specific Period

Hi All
I am facing issues on the HR FORMS for Brazil related to the Remunaration Statement
When I try to select any employee from a specific period (before April 2012), the system does not select any data.
From April 2012 until the current period and I could select the data and print the Form
I do not believe that is related to the Master data from the Employee, since it is always related to the same period, I guess it is on the HR Form configuration, retricting the period anywhere, but I could not find it
do you know any idea on how to fix it ?
Regards

Hi Steve,
In SQL Server Analysis Services, we can hide or disable hierarchy level by using
AttributeHierarchyEnabled property, however, when this property is set to false, this level will not appear no matter if contain data or not. In your scenario, you want to hide the hierarchy level dynamically, right? As Aleksandr
said, I am afraid there is no such a method to achieve it.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Revoke SELECT ANY DICTIONARY from FLOWS schema

Is there any workaround for revoking SELECT ANY DICTIONARY from the FLOWS schemas? Or is there any list of which objects on the SYS schema the FLOWS schemas need access to?
Message was edited by:
Jannis

Is there any workaround for revoking SELECT ANY DICTIONARY from the FLOWS schemas? Or is there any list of which objects on the SYS schema the FLOWS schemas need access to?
Message was edited by:
Jannis

How Do I get the right patches from my keyboard into LOgic??

Please help me.
I'm a beginner of Logic.
Can someone tell me how to record the sound that I want to record
into the MIDI track??
When I click on the first track with the grand piano picture, and then play my keyboard, I dont hear
grand piano but string sound. And when i play 3rd tack (fingered bass picture) i hear different patch from my keyboard. Can someone tell me how to
lock up right bank and patches with logic?
This is so confusing. Someone told me I need to download the patch list of my keyboard to make it show up in logic the same way it's showing up in my keyboard. Without it, I'd have to type every patch list of my synth into logic bank and prgram names. How do you guys deal with this?
PLease help me. This is haunting me for a week now..
One more question..
When I press record with metronum on, I hear metronum AND some other
patch sound playing along with metronum. How can I only hear the metronum?

iTunes menu File > Devices - Transfer purchases.

Can anyone explain to me why sometimes my ipad2 locks up and won't respond to any input from the keyboard.

My iPad 2 locks up sometimes and won't respond to any input from the keyboard. Have to reboot in order to fix the problem.

You have 3 choices:
1. Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
2. Restore from backup using iTunes
3. Restore as new without the backup

Selecting all data from employee where foreign key = null and show it in view

Hi guys i have view like following :
SELECT dbo.Nationality.NationalityName, dbo.Employee.DriverName, dbo.Employee.DriverID, dbo.Employee.NationalityID, dbo.Employee.ResidentNo,
dbo.Country.CountryName, dbo.Employee.CountryID, dbo.Branch.BranchName, dbo.Employee.BranchID, dbo.Employee.JoinDate,
dbo.Employee.ResignDate, dbo.Employee.HealthCarNo, dbo.Employee.JobID, dbo.Jobs.JobName, dbo.Department.DepartmentName,
dbo.Jobs.DepartmentID, dbo.Employee.PlaceIssue, dbo.Employee.Deduction, dbo.Employee.ExpireDateMedical, dbo.Employee.PolicyNumber,
dbo.Employee.Owner, dbo.Employee.Version, dbo.Employee.ExpireDateResident, dbo.Employee.Salary, dbo.Employee.SexID, dbo.Sex.SexType,
dbo.Sex.FlagSex, dbo.Employee.MiritialID, dbo.Miritial.MiritualStatus, dbo.Status.StatusType, dbo.Employee.StatusID, dbo.Employee.UnactiveReason,
dbo.Employee.BirthDate, dbo.Employee.DateToday, dbo.Employee.UserID, dbo.Employee.PassportNo, dbo.Employee.Period,
dbo.Employee.AccountNo, dbo.Employee.Bonus, dbo.Employee.AccountType, dbo.Employee.PlaceOfBirth, dbo.Employee.EmplyeeName,
dbo.Employee.ExpireDateresidentHijri, dbo.Employee.PassportDateStart, dbo.Employee.PassportDateExpire, dbo.Religon.ReligonName,
dbo.Employee.ReligonID
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID INNER JOIN
dbo.Country ON dbo.Employee.CountryID = dbo.Country.CountryID INNER JOIN
dbo.Branch ON dbo.Employee.BranchID = dbo.Branch.BranchID INNER JOIN
dbo.Jobs ON dbo.Employee.JobID = dbo.Jobs.JobID INNER JOIN
dbo.Department ON dbo.Jobs.DepartmentID = dbo.Department.DepartmentID INNER JOIN
dbo.Sex ON dbo.Employee.SexID = dbo.Sex.SexID INNER JOIN
dbo.Miritial ON dbo.Employee.MiritialID = dbo.Miritial.MiritialID INNER JOIN
dbo.Status ON dbo.Employee.StatusID = dbo.Status.StatusID INNER JOIN
dbo.Religon ON dbo.Employee.ReligonID = dbo.Religon.ReligonID
suppose i need to show all data from Employee table (NationalityName,BranchName,JobName) where
NationalityID =NULL OR BranchID=NULL OR JobID=NULL
WHAT I DO
Notes : I mean in topic(selecting all data from view not table
meaning i need to show all data in employee table by view
in case of forign key(any forign key)equal null

I think you need to change
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
to
FROM dbo.Nationality
LEFT JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Direct selection - moving anchor points with keyboard arrow keys

Hi,
I am using Illustrator CC. I just used the image trace tool to create a vector version of my company logo. It worked pretty well, but I am now just trying to clean it up a bit. I have a few anchor points that I just want to nudge up or down in the smallest increment possible.
I think it would be easier for me to do this using the keyboard arrow keys rather than using the mouse, but the arrow keys cause my selected anchor point to jump by way too large of a distance. I checked to make sure Smart Guides, Snap to Grid, and Snap to Point are all turned off. I can't think of anything else to do.
Can anyone tell me what controls how far the keyboard arrow keys will move an anchor point, and how I can set this to the smallest possible distance?
Thanks in advance,
Paul

Under Preferences (Command-K on Mac), on the first screen there is Keyboard Increment. This is the amount the arrow keys will move selected content, such as anchor points.
I usually keep this at "0.005 in", but when doing things that need extreme accuracy, I change it to "0.0002 in", which on my screen (2560 x 1600) is one pixel at AI's 6400% magnification.

How to play patches from MIDI Keyboard inside Mainstage?

Can I play patches from my Midi Controller inside Mainstage?? It seems hard to believe that I am limited ONLY to virtual instruments, and cannot arrange a setlist that includes patches from my synthesizer.

if you plug the audio out of your synth into mainstage you can.

Change has to be made in cleani up change log/PSA tables from Process chain

I need to clean up the Change Logs and PSA tables from the Process chains. Currently the change logs and PSA are deleting 90 days and 60 days from the PCu2019s. I need to change this to 7 days.
I took one PC first. It has DELETE PSA REQUEST. when i double click ..under 'Selection pattern for pattern-based deletion' - there are so many data sources listed (older than - 60days). Now i need to change this to 7 days . how do i do it?
Please guide me stepwise.

When I searched with this I got this document...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Please search forum to get your solution faster
Regards
Anindya

How to open a selected text link from the keyboard

I'd like to be able to search for some text on a screen, and then open the link that it connects to. The catch is that I want to do so via the keyboard, i.e. without moving the mouse. It seems there should be a way to do this. I've tried every combination of <meta-key> + Return, and every combination of <meta-key> + Down Arrow I can think of, since that seems like a natural place to hide such a shortcut, but to no avail. Anyone know how to do this?

select link =shift+arrow then=>the key next to start and besides cnrtl!

TS3406 All of a sudden, whenever I select an Emoji from the keyboard in an imessage, it does not register and closes out the message. I have tried, backup, restoring, installing, uninstalling. Help! I want my emoji back

Every time I select an emoji to send in a message, my message closes out. I have tried everything, shutting the phone down, re-installing, etc. Help!

Every time I select an emoji to send in a message, my message closes out. I have tried everything, shutting the phone down, re-installing, etc. Help!

Unable to revoke "select any table" system priv

I created a new user and unable to revoke select any table permissions. It appears that any new oracle user i create has the select any table permissions. I want to only alow this new user to select from 5 tables and not others. It seems as though there is a global setting on the database to allow select from any table. I can't change that if thats the case but i would like to create this restricted user.
How can I modify permissions on my new oracle user to not allow select any table?
Any help would be appreciated

My thanks again to all that took the time to post!
I ran those statements and the select that Aman had posted. The output surprised me and probably will lead to identifying the problem.
As you can see below the SELECT ANY TABLE privilege is under the sessioni_privs. however im also confused why the "revoke select any table from ITEAMS;" didnt work. here is the output from the suggestions in your posts.
SQL> connect iteams
Enter password:
Connected.
SQL> show user
USER is "ITEAMS"
SQL> select * from dba_sys_privs where grantee = 'ITEAMS';
GRANTEE PRIVILEGE ADM
ITEAMS CREATE SESSION NO
SQL> select * from session_privs;
PRIVILEGE
CREATE SESSION
UNLIMITED TABLESPACE
SELECT ANY TABLE
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> show user
USER is "SYS"
SQL> revoke select any table from ITEAMS;
revoke select any table from ITEAMS
ERROR at line 1:
ORA-01952: system privileges not granted to 'ITEAMS'
SQL> select * from user_tab_privs_made where grantee='ITEAMS';
no rows selected
So if the SELECT ANY TABLE is within the session_privs as seen above. How can i reovke that priv?

Up until approx 2 months ago I could select video clips downloaded from my camera and e-mail them.Iphoto9.4.3. This no longer works. I have tried dragging to my desktop and exporting to my desktop. I am not sure what has changed. Any ideas?

Up until approx 2 months ago I could select video clips downloaded from my camera and e-mail them from Iphoto 9.4.3. This no longer works. I have tried dragging to my desktop and exporting to my desktop. I am not sure what has changed. Any ideas?

Simply, sharing video via email is not advisable.
Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays. That means that video is rarely suitable for emailing.
Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind to Original.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Other than that your options include:
Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentions, and the person can still download the video file if they wish.
Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
Regards
TD

All tools in panels toolbar are disabled meaning I cannot change to any of the alternatives-E.g. Cannot select various Type tools as when I drag out I get the "disabled (Stop symbol)". Really need help with this, been like this for a while now. Many Thank

Panels tool bar is completely unresponsive. Cannot change to any of the alternatives.
I am using The most up to date Adobe Illustrator CC on Yosemite.

I actually can't believe I was being that stupid.
Thank you very much! This solves the issue.
Many Thanks,
Ronan

I made a MS patch-changer selecting ANY patch FROM MY KEYBOARD'S KEYS!

Similar Messages

Maybe you are looking for