I made an extra backup on a USB device and now I can't get it back because "the device uses too much power". Why didn't it a few weeks ago and how can I use the device anyway?

because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?

riks1105 wrote:
because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?
Get a powered hub
USB is cranky, you're not the first (probably not the last) to have this happen.

Similar Messages

  • I upgraded my iphone to IOS 6.1.2 through itunes and lost some photos from photos album and SMS ( in fact everything went back to how it was on my last back up which was few weeks ago). How can I recover them? Thank you ...

    I upgraded my iphone to OS 6.1.2 through itune and lost some photos from photos album and SMS ( In fact everything went back to how it was on my last back up few weeks ago). Do you know how I can recover them? Thank you.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • HT4101 My ipad says the device uses too much power when I connect my camera

    I brought my ipad 2 on holidays and have purchased the camera connection kit.  I tried to download my photos and an error message came up saying that the device uses too much power!    My ipad is powered up to 100% and I have closed any open files and it still says the same thing?  Does this actually work or do I have to return it?

    What have you connected to the kit ? The amount of power that is supplied to the kit is limited, and can't be changed - and a lot of card readers and cameras need more power than is supplied to it. If you have connected the kit directly to your camera then does your camera have a setting to enable 'mass storage device' and/or PTP (picture trasnfer protocol or pictbridge) ?

  • To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

    I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
    Thank you for any help/ solution you can offer.
    Regards

    I'd ask that on the iPad forum.
    https://discussions.apple.com/community/ipad

  • I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
    Cheers
    Guy

  • I just got an iPad 2 16 gb and was wondering how I can upload pictures from a micro sd card but my iPad is saying cannot connect device using too much power. I have tried a 16 gb micro sd card and 4 gb micro sd card. Can anyone help please??

    I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb

    You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • My CS4 PS no longer recognised the iPhoto library since a new video card was installes a few days ago. How do i fix this? I can drag and drop but then I can't use camera raw feature.Tks

    My CS4 PS no longer recognised the iPhoto library since a new video card was installes a few days ago. How do i fix this? I can drag and drop but then I can't use camera raw feature.Tks

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • HT4101 When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome tis

    When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?

    You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.

  • On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

    On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
    "USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
    I unplugged the device and the message still keeps coming up.
    This is what I have done so far to troubleshoot:
    I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
    The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

    I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
    1. Reinstalled OSX
    2. Restore the last known good Time Machine Backup.
    This did not fix my issue, so I called Apple Support and they told me this:
    1. Turn Power off.
    2. Wait 15 seconds.
    3. Plug in Magsafe adapter.
    4. Wait 15 seconds.
    5. Hold down the Shift+Option+Power Button for 20-30 seconds.
    6. Turn Power back on.
    Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
    and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

  • I can no longer download photos to my ipad with the camera attachment. the message says thats its using too much power. i have a 100% charge and i used it before and it worked fine.

    I can no longer upload photos with the camera attachment. I am getting an error saying the device uses too much power. I have used the device before. Is there anything that can be done to fix this problem?

    You don't actually say what the problem is, but maybe this can help:
    USB and Firewire information:
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    http://support.apple.com/kb/HT4049?viewlocale=en_US

  • Why does my Macbook pro said "unplug the device using too much power to re-enable USB devices" when i plug in my iphone's charger to connect my phone with the mac?

    my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!

    try resetting the ipad,or change the cable ,it woould work 

  • HT4101 my camera says check connected device. USB device uses too much power. I have got the photos on before with persistence but this is not working

    help

    Is the USB drive you are trying to connect a USB thumb drive or a USB hard drive?
    I have 4 USB thumb drives - an old one at 250MB, newer ones at 1GB and 4GB, and a new one at 8GB. All work in the camera connection kit except the 250MB (requires too much power). Suggest you get a new USB drive.
    Use your camera's SD card.
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • HT4106 unplug the device using too much power to re-enable USB devices

    iPad min cannot be changred, it shows
    unplug the device using too much power to re-enable USB devices

    Try unplugging it. Give your iPad a reset by holding down the sleep and home keys for about 20 seconds (until it reboots) then try again.

  • : USB DEVICES DISABLED Unplug the device using too much power to re-enable USB devices, message won't go away even w/all external devices unpluged!

    USB DEVICES DISABLED
    Unplug the device using too much power to re-enable USB devices
    Message appears in upper right of screen. I've unplugged all & it still appears, software, hardware?
    Any suggestions?

    Look into the USB ports for foreign material and other abnormalities
    Reset the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Does it happen in Safe Mode?
    OS X: What is Safe Boot, Safe Mode?
    In Recovery mode?
    OS X: What is Safe Boot, Safe Mode?
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • Audio corrupted while importing

    Hi, I always used my Mac connected firewire with my videocamera Samsung VDP-something to import my DV tapes to iMovie. I never had problem. Now, after 10-15 min. importing, audio results corrupted (sudden short silences interrupt speaking and sounds)

  • Help in the query for sub total.

    hi friends.        i have a query display below output.       but i wanted to get sub total of each repeated records,. Output is like below.   Segment Units Total items CRE CRE - MUMBAI 3 CTA CTA - CHENNAI 13 CTA CTA - DELHI 37 CTA CTA - HYDERABAD 10

  • IW31- How to add Search help for User specific fields in IW31 transaction.

    Hi Experts, I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction. Is there any user exit for this requirement. Please reply, it will be very helpful for me. Regards, B. V. Rao

  • Faqs on Abap objects

    Hi, Could someone send me faqs on Abap objects. Thnaks. Cheers, Garry.

  • BAPI_REQUISITION_CHANGE - SERVICES

    Good Morning to All. How do you change friends via BAPI items in the Services tab of a purchase requisition? Today I do the following. I use the BAPI_REQUISITION_GETDETAIL to retrieve existing information, then through external handle such informatio