I made command Link of tree with ADF, every node must not have link

Hi
How can I do not link on the leaf of the tree, I have link every leaf, but I dont want to get on some leaf of tree.
How can I do to get hierarchy link that it have not link on under hierarchy(node) on tree.

could be deleted

Similar Messages

  • Tree with multiple root nodes does not display

    I am trying to create a tree to display some hierarchical data which contains several root nodes.
    I have specifed that the TREE_ROOT value is always Null as the root nodes have a null value for the PARENT_ID. The page displays yet none of the data is displayed.
    I have manage to get it to work by creating a dummy single root that I reference from the existing root values?

    Phattam,
    The TREE_ROOT identifies the root node's ID, not its PARENT_ID.
    For example, if we build a tree on the oehr_employees table, the ID is EMPLOYEE_ID and the PARENT_ID is MANAGER_ID. therefore, to identify the start of the tree, we could populate the TREE_ROOT with a select statement e.g.
    SELECT employee_id FROM oehr_employees WHERE employee_id = 100This identifies a single value and the tree starts from employee_id 100.
    If we used a select statement that retrieves more than one row, e.g.
    SELECT employee_id FROM oehr_employees WHERE manager_id = 100then the tree starts at one of the children of employee_id 100 - ApEx will not show a tree that has more than one starting node. If you want to show these alternative starting points, you'll need to do exactly what you have done - create a 'dummy' root node.
    Hope this helps,
    Bryan.

  • HT2534 When setting up my apple I'd I get a verification email but there does not seen to be a link to click on there is a link that says "verify now" but it's not a link the only other thing on the page is a link to apple thats starts the process all ove

    When setting up my apple I'd I get a verification email but there does not seen to be a link to click on there is a link that says "verify now" but it's not a link the only other thing on the page is a link to apple thats starts the process all over again.does anyone have a solution for this problem?

    The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

  • I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.

    I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
    at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
    Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
    I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

    I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

    Many have posted this fix:
    Go to System Preferences > Energy Saver > Computer Sleep ... set to anything greater than the 15 min. default setting.

  • I'm trying to decide between the time capsule & airport extreme. With either option, will i not have air play?

    I'm trying to decide between the time capsule & airport extreme. With either option, will i not have air play? I have an IMAC, MACBOOK, 2 Apple TVs, 3 iPhones...

    AIrplay to digital or analogue devices like speakers or hifi system is only available in Express. Or Apple TV.
    The TC or Extreme will pass airplay protocol just fine to your ATV.
    The Extreme and TC and now identical apart from the TC having an internal hard disk.

  • Hi  have the ipod touch and having issue with the reminders app. do not have the reminders page  just the completed page

    hi  have the ipod touch and having issue with the reminders app. do not have the reminders page  just the completed page

    The problem has been fixed with the most recent OS X software update.

  • Layer mask occasionally does not have link when created

    when addidng a layer mask sometimes it does not have link when created which can get annoying when you dont realize it and you start moving groups.
    its happened a few times already.

    hi, most of my psds have tons of layers and i create the masks in a variety of ways, such as clciking on the mask icon or alt clicking when i have a selection going, i didnt notice anything until i started moving groups and things started getting messed up. today im going to pay attention every time  i make a mask to see if there was a specific task tthat is causing it.

  • I brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him,,

    i brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him....but i called to tmobile, they said this phone is not a stolen one,,thet told me to contrac apple.....is apple can unlock the icloud?

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • Prob: Click link or tree branch, a dashed box remains around the link?

    Problem does not occur when preview i-view. Can be seen in Internet Explorer in many areas throughout the portal when clicking on a tree item for example. Does not happen with Firefox.
    Thanks ahead for any help,
    Chris

    As a side comment about your layout code,  APDivs are going to come back and bite you in the butt.  Better you find out now rather than later.
    Here is why:
    http://apptools.com/examples/pagelayout101.php
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Can I share my published iCal with any iphone or must they have mac w ical?

    I have a mac and an iphone. I use ical. My friend has an iphone, but does not have a mac, thus does not use ical. Is there a way that I can get the hundreds of items I typed into iCal onto my friends iphone calendar? She can view it online, but can't subscribe to it. Any thoughts?
    Thanks!

    Hello ramirofromstrockholm,
    The steps detailed below explain how to go about publicly share a calendar (which doesn't require that one be an iCloud user to accept).
    Click the Share button to the right of the calendar you want to share, then select Public Calendar.
    Note:   You can also share the same calendar privately. For instructions, see the previous task, “Share a calendar privately.”
    To invite people to view the calendar, click Email Link.
    Type one or more email addresses in the To field, then click Send.
    The people you specify automatically receive an invitation email that includes the calendar’s URL. An invitee doesn’t need to be an iCloud user to accept an invitation to view a shared public calendar.
    In the sidebar, a shared calendar has a dark Share button.
    You can also resend invitations to one or more invited participants at any time.
    iCloud: Share a calendar with others
    http://support.apple.com/kb/PH2690
    Regards,
    Allen

  • How to schedule an appointment with a contact that does not have an e-mail address

    I want to use MS Office Outlook to schedule appointments with clients that may not have an e-mail address. They way appointments are made at our office is that a clients calls to ask for an appointment, the appointment book is consulted for the open time
    slots and a date and time is agreed. There is no need to send out an e-mail address even if the client has an e-mail address. Right now if a client does not have an e-mail address Outlook does not even show the option to set an appointment.
    On the day of the appointment the clients are phoned and it would be nice to be able to just click on the appointment and then have the computer make the call via Skype.
    This is supposed to be easier than using an appointment book with a pencil and eraser.
    Al Kaufmann

    Hi,
    It's a good suggestion but currently there's no such feature in Outlook.
    For more information about scheduling an appointment in Outlook:
    http://office.microsoft.com/en-001/outlook-help/schedule-an-appointment-HP010354410.aspx
    Regards,
    Melon Chen
    TechNet Community Support

  • Time Machine with two computers - "You do not have sufficient access privileges"

    I am currently running an Intel-based iMac at home and was recently given a new Intel-based MacBook Pro to use for work.  The iMac at home is running Leopard and the MacBook is running Snow Leopard.  After I loaded all of the necessary files from the home computer to the work computer (using the files on my external that I use for time machine backups), I decided to use the same external hard drive to use as the Time Machine for both computers.  However, now whenever I try to access the Time Machine Backups from the opposite computer, I am told that I "do not have sufficient access privleges."  E.g., when I try to open the TM MacBook files on the iMac or vice versa, I recieve this message.  Opening the files that were backed up on the same computer is no problem.
    Any thoughts? Thanks!

    kabbydriver- No, no, no, no no! Do not screw around with permissions on the sparse bundle or the mounted disk image. Dude, this is the third bad advice from you I've read in the last hour. Isn't it enough that one of your responses violated the forum terms of use and had to be deleted? It's time to give it a rest; come back another day.
    UCOdoublebass- You need to create a different Time Machine backup for each Mac. Two Macs cannot backup to the same Time Machine backup image. Read this to get started learning about your options:
    http://www.macworld.com/article/131841/2008/01/multiplebackup.html

  • I updated my Firefox to 5.0 and now my Kaspersky Password plug-in no longer works. Spoke with them and they do not have a compatible update yet, so I want to go back to Firefox 4.0. How do I do that?

    I love the Kaspersky Pure Password program and us it constantly! After updating my Firefox browser from 4.0 to 5.0... I found that the plug-in for my password program no longer worked!
    I emailed them and they do not have an update yet that is compatible with Firefox 5.0....
    So I need to go back to 4.0 till Kaspersky has an update because I am lost without my password program!
    Please help me.

    Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 5.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • ADF Menu model does not have shortDesc

    Hello  experts,  in my application I need to support 508 compliance.  I have implemented ADF menu model and noticed that the menu items does not have  shortDesc attribute.   In the structure window when I view  the menu xml file,  I can see accessKey, lable etc.  But no  shortDesc attribute.  Please guide me what should I do.   I will have to provide shortDesc for all text items, menu items etc.
    thanks

    I created ADF menu model from unbounded task flows which will be added to the template using  af:navigationPane.    The only place where we can add valid label and other attributes for each of the menu option is at  menu model meta data file.   This is xml file and in structure window, we can change the attributes to each of the menu option.   I do not see shortDesc attribute.
    Not sure it is a  bug in  jdev 11.1.1.6
    thanks

Maybe you are looking for