I made my screen large somehow...I cannot see all of my Icons

can anyone help...Rm

Roscoe,
This happens when you inadvertently hit CNTL while scrolling up at the same time.
Just hold Cntl and scroll down to fix.
Regards,
Captfred
Edit: sorry den.thed, I didn't notice you'd already said that.

Similar Messages

My iPod Touch icons are large and I cannot see all of them, touching the screen does not make them return to normal. It is charged and was updated over the weekend.

my iPod Touch icons are large and I cannot see all of them, touching the screen does not make them return to normal. It is charged and was updated over the weekend. What do I need to do to fix this?

never found the answer by looking at a similar q on the right...thanks anyway!!

TS3274 Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size? all the icons. How can I resize the infor on scren?

Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size?

Have you tried resetting your device? http://support.apple.com/kb/ht1430

How do I change the size of the words on the banner and tool bars? The words are so large that I cannot access all the options.

How do I change the size of the words on the banner and tool bars? The words are so large that I cannot access all the options.

Hi ewhuntley,
It sounds like you may be running Acrobat 11.0.07, is that correct? If so, please choose Edit > Preferences > General. In the entry Scale for Screen Resolution, choose 100%. Save your changes, and restart Acrobat. Did that do the trick?
Best,
Sara

When I go into my email account through Safari, I cannot see all of my messages. 26 may show on the screen but it says I have 32. However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

When I go to my email account through Safari, I cannot see all of my messages. It says there are 34 but I can only see 26. However, at the bottom right the arrows to go to the next screen are not highlighted? I also cannot scroll any further down. Does anyone know how to scroll down to see all of my messages? I use Travel-net Communications as my email provider (Ottawa, On, Canada).

hey ,
if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

My picture files open up off center so I cannot see all of the bottom part of the picture.

Hi,
My picture files open up off center so I cannot see all of the bottom part of the picture. The ruler across the top read "0" to 13.5". Down the left side of the picture the ruler reads 3", 2",1", 0, 1", 2",3" etc. This leaves a three inch empty space at the top of my viewing area and I lose three inches of the bottom of my picture. I cannot figure out how to adjust this. I have tried the screen modes and they do not fix my problem. What can I do to solve this problem?

Please provide sensible details about your platform, exact version of your OS, exact version of Photoshop, complete details baout your setup, hardware details, monitor resolution, etc.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

PSE 8.0 Cannot See All Tools

Good Day Eveyone:
I cannot see all the tools that are listed in PSE Help for PSE 8.0. For example Healing Tool - I only see the Spot Healing Tool on side of my screen. I do not see both clone tools. How do I get these other tools listed? Thanks.
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using//WSae2ea3b149d0c3591ae939f1038 60b3d59-7e2a_WIN.html
Thanks Robert

Thanks Anyway but I just found it.

I cannot see the NI-DAQmx icon in measurement window in Labview 2013 (student Edition)

Hi All:
I have installed NI-DAQmx and Labview 2013 (Student Edition). I have connected an NI USB-6008 DAQ and tested it using NI-DAQmx and it is working properly.
Now I tried to do logging of data from this device using the installed Labview software but as I open a new project and go to Block Diagram screen and display the measurement menu I cannot see the NI-DAQmx icon in the measurement window (Menu) within Labview 2013 (student Edition).
Any suggestion?
I am attaching two screen shots.
Please help.
Thanks
Solved!
Go to Solution.
Attachments:
1.png ‏77 KB
2.png ‏88 KB

In which order did you install the software packages?
You should install LabVIEW first, followed by DeviceDrivers!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Cannot see all folder in share drive

I had a PC (WIN7) with share drive network. The problem is i cannot see all folders in share directory (total 68 folders), it's show 38 only in my MBP 10.6.7. But seems without any problem in TIGER or other PC. I had to try re-install, but still got same problem!
Anyone else experiencing the same? Any suggestions as to a fix?

Hi, a couple of ideas...
The Vanishing Startup Drive or Folders by Pink Mutant/Francine Schwieder...
http://pinkmutant.com/articles/invisible.html
I wonder if ACLs got enabled on those other drives?
http://x704.net/bbs/viewtopic.php?f=12&t=2180&p=26242

I cannot see all preferences options

Hello
I'm new to flash pro CC but I've already worked in flash...
I'm animating a sequence and would like to activate the span based selection but I cannot see all the options in the preferences menu.
How can I get to see all the options in the preferences menu?
(sorry if there are some mistakes I'm french)

Hi Brice,
Which version of DW are you using? Which OS? Have you experienced this issue before or is this your first encounter?
As a first step, I suggest you try recreating Preferences (Re-create preferences) and see if that helps.
Thanks,
Preran

JDeveloper 11g:Cannot see all the content of a page, because of size screen

Hello all!
I am developing an application with JDeveloper 11g, using ADF 11g.
I created a page (all content is in a PSL), but when I deploy the application, if someone has a small screen, he can not see all
information on the page.
I want to know what I can do for him to descend, or turn left to see the entire contents of the page.
Thank's,
Nystan

It kind of depends on the layout component you are using.
A panel stretch layout should be able to adjust the size - unless you hardcoded values into its size.
You can use a panel group with layout set to scroll to enable scrolling of the page content.

I cannot see all the data in target disk mode

I have an issue where my MacBook pro is not booting into the Yosemite. I see the progress bar hangs at about 45% on the startup screen. I called Apple support and they asked to use the target disk mode to connect to my mac and then copy data like that. I am using the same technique but I am not seeing all the data under users. My data under the folder users had another users data that I cannot see.
How can I see my data for all the other users? Help please!!!

Could be that the the data or directors on the HD are corrupted.
- Copy all data you can
- Try cloning the whole disk to another disk before you attempt recovery methods.
- Try repairing the HD via Disk Utility
- Try a data recovery program
http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/

Cannot see all mail accounts when I open up Mail

Having down loaded iOS 5 for iPad, I cannot see the arrows which takes the user back to other Mail accounts

First thing... do a simple reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Now, is that screen viewable?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pages go from right to left, blank space on left and cannot see all of page at one time

All my screens move to the right and there is blank space on the left which is about 4 inches wide. Then my screen goes back to normal for a second or two and then back to the right again and I cannot see the whole page.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
If you increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

New LoginManager cannot see all users

Hi all,
Just trying to get to grips with users and roles in Azure, and I've hit a couple of questions.
Here's the process I've been through.
I created a new server
I exported a database from an existing SQL Server as a bacpac file, and successfully imported it into Azure (this step I'm hazy on the details, because I only did it the once, and it was a while back now!)
I connected an existing MS Access front end to the Azure SQL Database successfully.
This database is for a client with half a dozen staff. All works well.
Going through the database in more detail today, I noticed that the database in question has users for the staff at my client, but not a user called Andrew - which I've always logged in as. Looking more closely, I see that the Login of Andrew, which I understand
was created as part of the provisioning process when I set up Azure SQL Database, is mapped to dbo within the database.
In order to keep things simple, I decided today to create a new user "Andrew" on the database, which would map to the Server login of Andrew. To do so, I used this statement:
CREATE USER andrew
FOR LOGIN Andrew
However, the following message was returned:
'Andrew' is not a valid login or you do not have permission.
This confuses me, as I can see that the login Andrew does exist, both when I look at the Security > Logins object within SSMS, and if I issue the statement
SELECT * FROM sys.sql_logins
So, I thought that maybe the solution would be to create a new Login, called AndrewR, and then create a new User on the database (and on the master database), also called AndrewR. This I did, and then I used the following two statements (while logged in
to the Master database as the original Andrew account):
exec sp_addrolemember 'loginmanager' , 'AndrewR'
exec sp_addrolemember 'dbmanager' , 'AndrewR'
Now, all seems good, in that the login is created successfully, as is the user. However, I now have the following problems:
When I log in to master as AndrewR (the new user) I can see all the databases. But I can't see any user except AndrewR, dbo, guest, sys and INFORMATION_SCHEMA. When I log in as the original login (Andrew) I can see all the users on all the databases.
Despite having granted loginmanager role to AndrewR, when logged in as AndrewR if I try to create a new user, I get a strange error:
Password validation failed. The password does not meet policy requirements because it is not complex enough.
This would make sense except that the password I've tried to assign is 'drtrtDSP()*)_IPOJTh1s_FREDpw1!' which is about as complex as I can come up with!
None of this solves my original issue of trying to create a user called Andrew to match the original Login of Andrew.
I'm sorry to post several questions in one post, but they seem to me to be all part of this same issue.
Can anyone help or provide guidance?
Incidentally, I've read (several times!) the information at http://msdn.microsoft.com/en-us/library/ee336235.aspx - this is where I've gained what little knowledge I have!
Many thanks
Andrew

Hello
Andrew,<o:p></o:p>
Thank you
for the explanation. Is there is a specific reason why you want to create a
user 'Andrew' for the Server-level principal login 'Andrew'. Cause - <o:p></o:p>
1. The
database user in the master database corresponding to the server-level
principal login cannot be altered or dropped.
2. Although the server-level principal login is not a member of the two
database roles dbmanager and loginmanager in the master database, it has all
permissions granted to these two roles.<o:p></o:p>
Please refer msdn.microsoft.com/en-us/library/azure/ff394108.aspx#logins and msdn.microsoft.com/en-us/library/ee336235.aspx#DatabasePerms for details.
Also, I
believe only the creator of the database(and the server-level principal login)
can create users in that database. For ex - <o:p></o:p>
After you
created user AndrewR and granted it the dbmanager and loginmanager roles.<o:p></o:p>
1. Connect to the database server(master database) as AndrewR.<o:p></o:p>
2. Create a new database AndrewDB and a new login AndrewR1, like below - <o:p></o:p>
create database AndrewDB<o:p></o:p>
create login AndrewR1<o:p></o:p>
exec sp_addrolemember 'loginmanager' , 'AndrewR1'<o:p></o:p>
exec sp_addrolemember 'dbmanager' , 'AndrewR1'<o:p></o:p>
3. Connect to the database AndrewDB as AndrewR<o:p></o:p>
Create user AndrewR1 for login
AndrewR1
-------à this works.<o:p></o:p>
I hope this
helps. <o:p></o:p>

I made my screen large somehow...I cannot see all of my Icons

Similar Messages

Maybe you are looking for