I made the switch to Mac... Help!
I bought an iMac 21.5" a few months ago. I have really only been working in iMovie on it... in the attic.
Well, I thought it was time to get to know the Mac better, and moved it down to the office. Before I turned it off, it asked me about updating the softwear, which it seemed to me, had already downloaded and needed to install.
Off it went (without installing) and i moved it to the place of prominence on my desk....
When I turned it on, it was very slow.. and though it started up, all I got was the spinning beach ball. It would not allow me to click on anything, finder, navigator nothing... just the spinning ball.
I couldn't get it to do anything... it would go into hibernate, I shake the mouse, it would come out of hibernation but nothing else.
So, I shut the power off... turned it on, same thing... spinning ball, 20 mins, 30 mins, 130 mins etc.
Then it wouldn't come out of hibernation... blank screen.....
Power button, and now, just a Blue Screen.
Help!
Not looking good, I'm afraid. I take it you haven't got a back-up. Once you get past this hiccup it really is a must to have an external back-up which is made incredibly easy with Time Machine - hard disks can fail at anytime, unfortunately.
I doubt this will work, but it's worth a try. Try starting in Verbose mode - press the power button (assuming the Mac is off) and hold down the 'V' key. Hopefully the Mac will boot up with loads of text on screen. Once it stops scrolling type:
/sbin/fsck -fy
(note the space before the hyphen) and hit the enter key. The Mac will attempt some repairs - if it comes up with a message saying something was modified repeat: /sbin/fsck -fy until you get a clean pass and a message that says something like 'Macintosh HD appears to be OK' (let's hope) type:
reboot
and hit the enter key. Hopefully the Mac will start up - but, as I say, I'm not optimistic this'll fix your problems.
If this doesn't work there are other disk repair utilities out there – DiskWarrior comes highly recommended, but there are no guarantees it'll fix it. Failing that, I guess it's a warranty repair and hopefully the Apple service centre might be able to save your data. Good luck.
Similar Messages
-
I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks
Apple most likely has the same poor taste that Microsoft does when it come to defaults. Microsoft likes to hide things like settings, preset, folders etc from normal users think the dumb or something else. If Apple also hide things you will have to make some system setting changes that will allow Finder to do it job and find it for you.
-
I need to transfer all my photos and videos from my old PC stored in the SONY PMB program to my new fabulous MAC desktop. I do not know how I can do this. Plus for future photos/videos, how can I upload them from Sony products ?
Please help me
PS I just purchased the computer yesterday so it has the most current operating systemThe Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Do you know where the actual photo files are located on your laptop? If so, you can transfer them to the Mac over a LAN or by saving them to an external HDD, thumb drive or burning them to a disk. Then you can import the photos to the iPhoto app that came on your new Mac.
It would be the same process for the videos, however, it would depend what type of video files they are, as to which Mac app might allow you to view them.
BTW, since your Mac is new you need to Accept the iLife apps; iPhoto, GarageBand and iMovie into your Mac App Store/iTunes account. Open the MAS, sign into you account, go to the Purchased pane and accept the apps. -
Hello All, I have recently made the switch to all things Apple and still feel quite the rookie so hoping I can find help here! I'm a bit in shock as 0f now because my entire music libra was deleted by accident and I am completely stuck as to what to do now..I just got the 4s and haven't transferred much music over at all..I figured i could just export it all back but to my Mac...Any advice guys , is it even possible?
Restore from TimeMachine back-up.
-
Resources for Imac ---Just made the Switch from PC to Imac--
Hello everyone,
I just recently made the switch from windows to the intel based Imac apple... loving it..but things are a little overwhelming while trying to get adjusted to the differences.
So on that note.... Does anyone know of a good "cleaning program" for temp and junk files...
Preferably a free one and also can anyone suggest good and reliable apple/mac support web sites (aside from Apple.com) for downloads and tips/tricks
Thanks so muchGi - and congrats on making the switch. Just to get you started
For cleaning up and general housekeeping (although you shouldn't need to use it often) there's OnyX:
http://www.macupdate.com/app/mac/11582/onyx
This one's useful for keeping your apps up-to-date:
http://www.macupdate.com
and here's a few general interest that help you follow truths and rumours (lots!):
http://www.tuaw.com/
http://www.appleinsider.com/
http://www.macrumors.com/
http://www.macstories.net/
http://www.9to5mac.com/
It shouldn't take you too long to get up to speed... enjoy -
I've Made the Switch (from iWeb) & Lived to Tell About It.
I've gotten a lot of help and useful information from this forum over the years and I will certainly miss it. I've just completed a 2 month transition where I've migrated my site from iWeb/Mobile Me to a new site made in RapidWeaver and hosted by Host Excellence. I figured I'd write a little (or a lot) about my experience, to give some others an idea of what they've got to look forward too. Hopefully it will arm you with some things to do and look out for. While I am describing RapidWeaver here, a lot of this process will be the same no matter what new software you use. I started off being pretty happy with what I had going in iWeb and not being thrilled at all about making the switch. Now I am so glad I made the switch and I am far happier about the new site than I was with the old one. BTW: the new sites address is: http://grillinsmokin.net . Feel free to visit. I think you'll quickly notice some things you simple can't do in iWeb. This isn't a knock against iWeb. I was very happy with iWeb and had no plans to switch. Where it hasn't been developed actively for four years now, it has been left behind somewhat.
To begin at the beginning: I've had a site made with iWeb since January of 2006 called Grillin' & Smokin' that combined my love of outdoor cooking and photography. Over the years it had grown rather large, with 375 photo entry pages and 230 blog pages. The Domain file was around 1.4 GB. This was not something I ever wanted to have to recreate from scratch. However losing MobileMe as a host was taking away Value Added features like the Hit Counter, Slide Show, Blog Comments, Blog Search etc. The handwriting is on the wall for iWeb too. I might have gone on using iWeb, but between losing key features and the fact iWeb was starting to show it's age, it was time for me to move on. Just before the iCloud announcement this Spring, I began researching website building software. I looked at their features, working methodology, themes, plug-ins and extensions. I download trial versions of the software where it was available as well as some of the themes or plugins I might be using. I gotta tell you, at first I was very frustrated and upset, because I was not finding anything that had the ease of use of iWeb and looked like it was going to be able to recreate the appearance of my original site. It appeared to be a series of compromises. I'd like the features of one package but I hated the themes available for that software. Another looked promising but isn't being upgraded regularly. My biggest frustration was some of the iWeb page types just don't exist in other packages. For example the Album Pages where multiple Photo Pages can be grouped and displayed, don't have a direct equivalent in any other package I saw. As part of my discovery process I read reviews of the various packages, including head to head comparisons of some of them. I also visited their discussion forums. After doing this for 3 weeks I "settled" on RapidWeaver. It was under active development; had a thriving developer community turning out a wide variety of add ons, plug-ins and themes; had an active user community & had lots of help resources available. The web pages it produced were standards compliant and you could get nice effects without resorting to Flash. I think the biggest selling point was all of the add-ons-kind of the same advantage the iPhone has with it's App Store.
Once I bought RapidWeaver & a 3rd Party theme, I tried the demo versions of some of the plug-ins and made sample versions of my page types from iWeb in RapidWeaver. I wanted to have a process in place, before I started mass production on the site. You really do need to do some of this homework in advance to avoid unpleasant surprises. The biggest minus I'd turned up about RapidWeaver (RW from this point on) is it didn't handle big sites well at all. The equivalent of the iWeb Domain file is the RapidWeaver Sandwich file or RWSW file. Once the RWSW file reaches 100MB or so you can get crashes or hangs uploading your site. Now 100 MB doesn't sound like much particularly when I was talking about a 1.4GB iWeb Domain File for my site, but RW doesn't include the photos in the RWSW file. Still I knew I was going to have to divide my site across several RWSW files. Initially the plan was to divide it into 3 sites: The main landing pages was one RWSW file and is the site reached by the url for the site. I was going to have a second RWSW file for my blogs and a third for my photos. Ultimately I ended up dividing the photos into 3 RWSW files. These extra files are hosted on sub-domians whose name goes in front of the main domain (http://sub-domain.main-domain.com). This meant some extra setup for me with my web-host, although they made the setup for the 4 sub-domains very easy and they were free. If you have a huge site and will need to split it, you'll want to check with your prospective web host if they charge extra for hosting additional sub-domains. For small iWebs sites this is not an issue-you have one RWSW file and one web address, just like you do now. My having sub-domains also meant more work linking files together across sites. RapidWeaver has something called an Offsite Page which helped with some of this, but having to split my sites up was the biggest PITA for me about the whole process. But knowing about this going in was better than finding out at the end when I tried to upload a single massive site. If you have a small site, the setup for uploading it is as straight forward as iWeb. RW has a built in FTP uploader or you can publish to file and use an FTP client like CyberDuck.
Once I had my site organization in place and had experimented with best practices for recreating each iWeb page type in RW, it was time to begin. I've gotta tell you when I started out I was not a happy camper. I liked the iWeb way of doing things about 70 percent of the time vs 30 percent for RW. At the end of the first week I told myself I have to move on and give up on the past. I was no longer going to be using iWeb and the sooner I embraced the RW way of doing things, the better off I'd be. At this early point it was still hard to see down the road to the end results. No matter what new package you buy, you should try to go with the flow and learn a new way of working. You'll be happier and less frustrated in the end. In my case after having gone through the entire process now, I've ended up changing my opinion. Now that I've gone through the entire process, I like the RapidWeaver way of doing things about 95 percent of the time and 5% for iWeb. That 5 percent is mostly the large site issue I've described. As I began working I was able to reuse much of the text from my iWeb blog in RW. I did have to paste it in as unformatted and reformat it in RW. My pictures were well organized in Aperture which also helped speed the process. One of the things I did is automate some of the tedious repetitious tasks. I created Quickeys macros to do things for me when ever possible. For example I could go to a particular photo page in iWeb and select the first caption. I would then trigger a macro that asked how many captions are on this page. It would then select the caption in iWeb, copy it, switch to RW and paste it in place and repeat XX times. If you know Quickeys or Applescript (I am guessing) there are plenty of opportunities to put it to good use.
RW present a different way of working than you are used to in iWeb and you'll just need to get used to it. What I am describing here would be true of any of the other packages I looked at too. First off it isn't WYSIWYG while you are editing. You are working with fairly basic looking text with few clues as to what the real page looks like. You switch to a preview mode to see what the page looks like in a browser. At first blush iWeb seems to win here. But what I soon realized is RW allows you to mix regular text and pictures together with html snippets right in the same text box. This makes adding counters or badges easy. Plus you can use HTML formatting for things like Titles occurring through your page. Instead of increasing the font size, making the text bold and changing its color, you can simply say this is Heading style 2 or 5 and this happens automatically per the predefined style. Better yet if you change a style everything on that one page or the entire site (your choice) inherits that change. So by working in a non-WYSIWYG mode you gain some long term. advantages over how iWeb works. The same is true with positioning. In iWeb it is fast and easy to place things on a page right down to the pixel. RW just doesn't give you that type of precision and next to splitting my site, layout was my biggest frustration with RW. At least to start. But there is a good reason for this "lack of precision" that may not be apparent until you view the site in a browser. When iWeb came out, you really didn't zoom your browser. iWeb uses Absolute Positioning where it uses anchored boxes for everything, whereas RW uses Relative Positioning. Objects with anchored text or picture boxes like iWeb start having problems if you zoom in or out more than one step. Text starts over flowing other text because the text boxes are anchored by one point. Pages just start looking scary if you try to zoom in or out too much. RW is looking at items relative positions and their relationships with one another. So initially you aren't placing the objects in the same way, it is more like eyeballing things in a way. But when viewed in a web browser you can zoom in or out to your heart's content. So what seems at first like a big disadvantage at first for RW, is actually a HUGE advantage.
This is why you need to go with the flow and try to embrace the new way of working. I mentioned earlier that I wasn't able to find a page type that was equivalent to the iWeb album page. I was able to use a very flexible plug-in for RW called stacks, which allows you to create various single and multi-column or multi-row layouts using empty stacks. You then populate the empty stacks with content, pictures text etc. These pages were not like iWeb albums where you nest the Photo Album Pages in the Album page and they create a skimmable preview and an automatic link to the album. Once I actually started making these new "Album" Pages in RW I realized I was gaining as much or more than I was loosing. The skimmable preview pictures was eyecandy I could live without. Nice touch, not essential. I never liked the way the preview picture shown on the Album page was the first photo in the Photo album. You couldn't change this. Now that I am placing my own photo on the Album page, I could use any picture and make it any size I wanted too. In iWeb the Album Caption was the name of the Photo Page. If this name was too long the caption didn't go to a second line, it got cut off. Any link in RW can have a description added to the link which is what you see in the yellow box when you hover your mouse over the item being linked. I used to hide text boxes links under the pictures on the Albums page for SEO and navigation help. So yes now I have to manually link the Album picture to the Photo Page, but I am no longer creating a hidden text box with a link that I have to remember to move when I add pages to the album. So once again my first impression was wrong. Advantage RW.
Another advantage to RW is any page type can have a sidebar. You can easily add favicons and site logos. You can easily add metadata to any page and customized the names of the path to your pages. The Themes can be more powerful and customizable too. About one week into the process I was begining to really go with the flow and see this new way of working had far more advantages for me than disadvantages.
By the time I finished my new RW site, my iWeb site was looking tired and dated. My biggest and most pleasant surprises were saved until the end. Any kind of SEO was a PITA with iWeb. You had to embed snippets on each page with a code from HaloScan or Google Analytics. Problem was, iWeb erased any such HTML code while you were uploading. So you then had to use a regular expression in the text box ("HaloScan goes here"), upload your site and replace the regular expression with the actual code using a 3rd party tool. Oh and don't do that on any blog page where you are using the built in Apple commenting system because the comments will disappear. I also had problems where the new comment badge would not show up for weeks or months after a comment was made. It was getting so the things I had to do AFTER I uploaded my site to MobileMe were taking longer than uploading the site. Once the site was recreated, it was time to add blog comments, a guestbook, a contact form, Google Analytics, and publish a site map. In my iWeb-influenced mind, I was saving the fussy PITA things for last. I was dead wrong. Unlike what you go through with iWeb, it couldn't have been been easier in RW:
-Blog Comments: Set up an account with the provider. Then I had to go into the page setup in RW for my blog page and click on a popup menu of comment providers & select Discus. If your provider isn't listed you paste some HTML code from the provider into a dialogue box provided by RW for the blog page. In my case it was simpler, just set Discus in the popup menu. Now instead of the iWeb badge showing me new posts (and only when it was in the mood), I now get an email.
-Google Analytics: Set up an account with Google. Go to the Stats area in the RW side bar, click on Configure, paste in your code from Google and you are good to go. You can monitor your Google analytics stats right from within RapidWeaver. (Also works this way for GoSquared Live Stats).
-Guestbook: Same as iWeb. You add a page with an HTML snippet from your Guestbook provider in an iFrame.
-Contact Form: This is a RW page type which masks your email address from the spambots by transferring the information to an invisible and inaccessible page within your site. This page then emails you the information.
-Full Site Search: This doesn't exist in iWeb. You can search your blogs right now, but this is one of the features you lose when MobileMe shuts down. By adding an inexpensive Plug in called RapidSearch Pro I enable full site search. You set up a MySQL server for your site. Host Excellence walked me through the 4-Step Process via a well written Help File. You then control what pages are indexed via your sitemap.xml file. You let RapidSearch Pro index your site and you are good to go.
-SiteMap: There is a simple SiteMap generation feature built into RW 5. There are third party tools for doing this for iWeb. I purchased an inexpensive RW plug in called SiteMap plus that not only generates the sitemap.xml file, it allows you to customize what pages get searched and at what frequency. This ties into what is searched via RapidSearch Pro. This plug-in also generates a visible and customizable sitemap page to help your site's users find their way around. Another bonus of being hosted off Mobile Me is when I went to add my sites to my Google account they had already been indexed. It seemed like they never crawled MobileMe unless you told them you wanted them to look at your site.
Link Checking: This doesn't exist in iWeb. I bought another inexpensive plug-in called Link Inspector for RW. It checks all of your internal and external links and generates a report showing the status of all links. This was just what the doctor ordered for my large site. I will run it periodically to make sure external links are still working and that I haven't broken any internal links.
My site was pretty much wrapped up on Monday August 8th. I just had to add in Blog Comments, Google Analytics, the Guestbook, Full Site Search and the Site Map. I figured I would go public on Tuesday or Wednesday. To my great pleasure these 5 items took all of 2 hours to get set up and working. This was a nice touch after 2 months of hard work.
So there you have it. This is the process I went through converting my site over to RapidWeaver. Your mileage may vary. I am not pushing RapidWeaver for everyone. You have to find what program is the right fit for you. You may find staying with iWeb on a new host is the right fit for you. You need to decide if you can live with the features you lose once you aren't hosted on Mobile Me. For me there was great pain, but in the end there was a lot of gain too. I do like my new site and I feel it will serve me well for years to come. Good luck to all of you in whatever path you choose. Lastly thanks one last time to the helpful folks around here
Jim
http://grillinsmokin.net
Message was edited by: Jim MahoneyThanks Roddy. I agree with your take on some of the other software you mentioned, at least from the perspective of having dabbled with demo versions of some of the others. I will add that with Sandvox I felt a little nervous about it. Kind of almost like the software was a "hobby" effort a la the first gen Apple TV.
I also agree with some of your points regarding RapidWeaver. But now that I've built my rather large (for a hobbyist site) website with it I will have to respectfully disagree about it being at the same level as iWeb, or as you put it: a sideways move. While iWeb can be made to do things it was never originally meant to do, there are many places it simply can't go that RapidWeaver can. I was often hitting the limits of what you could do in iWeb, whereas with RapidWeaver, with one exception, I didn't feel like I was running up against any limits yet. The exception is it's lack of ability to handle large sites well. That was almost the deal breaker for me. I find it unexplainable that a software package with all kinds of add-ons helping you make more ambitious sites, can't handle those same sites in a single file. This was almost a deal-breaker for me. For folks who have small to medium sized iWeb sites this isn't a concern. There are also ways to warehouse images on the server to keep file size down, but this gets more complex than many folks coming from iWeb would want to do. Me splitting my site up the way I did was more work than I wanted to do.I almost bagged the whole thing and was close to just taking the old site down.
Now if we were to fantasize for a minute I can think of a way where I could also say iWeb to RapiWeaver is a sideways move: While I don't think iWeb '09 is the equal to RapidWeaver 5, I'd bet that iWeb 11 or the oft rumored iWeb Pro might have been. I kept hoping that Apple would keep pushing the limits of what iWeb could do and add in some missing features and head down the HTML 5 road.
I will conditionally agree on your saying that the shopping list for RapidWeaver can be substantial. I will qualify that by saying: Depending on what you are doing with it, your shopping list for RapidWeaver can be substantial. With one exception, I do think the base package of RapidWeaver is fairly priced. I think the basic Stacks functionality and a few basic stacks should be part of RapidWeaver. The more esoteric stacks can be pay as you go. When iLife 11 was announced without a an update to iWeb, I did some preliminary pricing and I was rather discouraged at the total. This spring I got more serious about things and repriced RapidWeaver and add-ons. After trying out various themes and plug-ins, I was able to sharpen my pencil and reduce the cost of entry considerably. One of the things that helped is the theme I bought had a couple features built into it. It had a nice lightbox type slideshow for photo pages and animated banners/headers capabilities built in. This saved me the expense of several additional plug-ins. Also while I have a blog, I don't consider myself a blogger. I was able to use the built in blog page and I don't feel limited by it at all. Some of the other ad-ons I bought: such as the link checker, site wide search and a more sophisticated sitemap generator were items I added because I could tell I would want to keep the site going long term. Those 3 plug-ins did that a a low price. I didn't think they needed to be built in.
But everyone's mileage may vary. RapidWeaver or any other web design program isn't right for every iWeb user. It all depends on personal needs, abilities and budgets. I'm just glad I can get back to posting to the site and not recreating it.
Jim -
I bought the Dreamweaver CS5 for Windows a few years ago. Now I have also a Mac Book pro, where I have to Install the Dreamweaver CS5. I have made the Download for Mac, but I can't Install it. When I push the button, I got an error message.
CS5 for Windows can only be installed on Windows operating system.
You would need to purchase CS5 for Mac OS.
Given that CS5 is now 4 versions back, it's unlikely you'll find a copy.
You could get DW CC from the Creative Cloud which supports both Win/Mac platforms.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O. -
Made The Switch! Any Good Books To Help A PC Vet?
Anyone know of any good books to read up on to get used to the Mac? Ive been a pc guy forever and would like a "guide" to ease me into the Mac lifestyle.
Yes I would recommend getting Mac OS X 10.6 Snow Leopard: Peachpit Learning Series (Paperback)
by Robin Williams. Amazon is currently selling it and I'm sure you can find it on e Bay too. The link to Amazon is here.
Also the links that were provided are excellent and a great starting place.
I bought her Leopard book a couple of years ago and found it invaluable when I was making the switch.
Regards,
Roger -
Need help...just made the switch from treo
Some things i would like to know if Blackberry Curve can perform.....
Is there a setting that will make the LCD screen light up when I receive email and text notifications instead of me having to hit a button>
Is there a setting to allow a text message to auto display instead of having to "find" it?
Is there a way to organize my messages instead of having all texts, phone calls, and email messages all in one gigantic list?
thanks )
Solved!
Go to Solution.1. Nope.
2. What do you mean "find it". My text messages appear (newest first) at the top of the SMS folder. One click on the homescreen and I see them.
3. Yes, go to Messsages > Options > General Settings > scroll down to Email and SMS Inboxes = Separate.
If you want the phone calls NOT to log in your messages folder, press the green dial key > Options > Call Logging and check NONE or your desire in that list and save.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi everyone,
Well, after 10+ years of using a Windows PC, I finally decided to make the big switch!! I ordered a 17" iMac last week on Apple's website, and it arrived at my house today!! In less than 10 minutes, I was connected to the internet!!! I can't even begin to describe how thrilled I am with this computer!!! I spent lots of time in these forums before I made the purchase, and I have learned soooo much!!! I do have a couple of questions, though (please forgive me if they are stupid!):
1. Is there anti-virus software already loaded in my iMac? OR ... do viruses only attack Windows-based PC's?
2. I'm trying to transfer some files, music, photos, etc. from my old Dell to my new iMac. I tried following the directions from Switch 101 (http://www.apple.com/support/switch101/migrate/), but I'm having trouble. I'm trying to use the "Direct Connect" route and transfer the files directly with an ethernet cable. The directions say: "In the Finder on your Mac, choose Connect to Server from the Go menu to open the window." But when I open the Finder, I don't see a Go menu or a Connect to Server option. So, I'm stuck there. I was hoping maybe someone could tell me how to find the Go menu. I consider myself to be pretty techie, but I can't figure this one out.
I guess that's all I can think of for now. Let me just say again how much I LOVE my new iMac!!!!!!
Thanks in advance for your help!!
iMac 17" Intel Core Duo Mac OS X (10.4.7)If you click on Finder look at the menu bar. FINDER should be in bold, if not then you don't have finder on the top. Next to view should be GO.
If you see finder in bold at the top but can't find go...
Then try this key combination [ APPLE ] + [ K ] and that should load up to the Connect to server window.
The [ APPLE ] key is the key with the apple symbol and that square looking thing with the loops on the corners.
I hope that helps. -
Switching to Mac - Helpful Tips & Suggestions Requested
Well, after my experience with the iPhone, I became interested in a Mac. After doing some research, I decided to make the switch. My new 15" MBP with iWork and MobileMe should be arriving Monday or Tuesday (I was really hoping it would arrive by this Friday to give me the weekend to play with my new toy, but no such luck).
Anyway, I was looking for tips and suggestions for a Mac newbie (and laptop newbie) as well.
The machine is purely for personal use: some light gaming (though I may just keep my XP box for this), email/internet, personal finance, iTunes, research/writing for informal presentations to small groups, and Bible study (Logos developing a Mac version of their software was the final deciding factor).
Any suggestions/tips/recommendations on helpful books, websites, software and accessories would be much appreciated. Specifically, I would appreciate some feedback on personal finance software, research/note-taking software, and docking stations/KVM switches. Also, anything I need to be aware of as I transfer my iTunes library to the laptop and setting it up as my primary iTunes machine.Hi
Glad the link was useful, and I can completely understand with the books.
No I have not used anything else of this type, I stumbled on notebook first of all and did not feel the need to look for anything else.
Notebook is really good for keeping all the notes for a project in one place. You can keep various types of media (written notes, web page clippings, recordings, pictures etc...) in one notebook, and organise them in several different ways. You can have various different notebooks open at the same time.
The feature I like best is the ability to make an audio recording of say a lecture, interview, meeting, even TV programme and keep notes at the same time which are then linked to the point in the recording when they where made.
Then later you can look at your notes and jump into the recording to hear the relevant part of the recording to those particular notes.
So you can have an accurate record of what went on as well as a written record of your thoughts at the time and both are link chronologically.
You can also add in additional notes when you play back the recording later which is handy in case you miss something first time round.
Notebook uses the internal mic and does all this from inside the app, so you don't need anything else.
I find it is just a really handy app to have around.
Thanks for the star by the way.
Paul
Message was edited by: scalawag
Message was edited by: scalawag -
I made the switch from PC to MAC
Hello Everyone
For the past few weeks I have been visiting this forum for info on the MacBook Pro. Thanks for all the information! A week ago I called the nearest Apple store - an hour and a half away, and reserved the $1999 model, $1799 with my student discount. A week later, today, I called and my laptop had arrived. I took the trip down there and picked it up. I love it and I'm very happy with it. No problems so far! I bought the airport express for wireless internet for my laptop but I didn't realize at the time I bought it that my regular dell desktop is now not hooked up to the internet when i had to hook up the cable model to the airport connection. What can i do to solve that now that I already purchased the airport express? Thanks!
MacBook Pro Mac OS X (10.4.5)If you want to have your Dell wired, and your laptop wireless, you can accomplish it with just a simple cable.
When you plug your internet into the base station in the WAN port you have another LAN port that outputs that connection. If you get a network cable (straight-through) you can connect it fron the LAN port on the base station to the internet port on your Dell.
I do not own this particular base station but I think this will work. The picture below will give you an idea of which port is which, even though it is probably shown on the base station.
But if you want to have both connected to wires at once then you will need a hub. You can buy any simple hub that you pick up from any local tech store, no need for anything fancy. You would plug the hub into the LAN port on the base station then you would plug the your Dell and your laptop into the hub. Both require network cables that have a Straight-through configuration. (should say it on the cable packaging.)
Hope this helps, good luck!
Awaiting my precious MBP.
Awaiting my precious MBP.
Awaiting my precious MBP.
Awaiting my precious MBP. -
I finally made the switch from a PC to the MAC
After years of ******* for one, my new Mac arrived yesterday. When I plugged my 3g Phone in, Itunes popped up a message essentially telling me it had to delete all of my music in order to setup a sync relationship with the phone. Is there anyway around this?
You need to transfer your music from the iPhone to your new Mac. You can only sync music from one library. You can choose cancel when you get the message that it is linked to another library or there are ways to prevent syncing.
You can open iTunes first and go to iTunes>Preferences>Devices and check the box "Disable automatic syncing for iPhones and iPods" and choose Ok. Then connect your iPod.
You can also use a keyboard command to prevent your iPhone auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys together. This will stop the phone from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure it has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes for Mac - Keyboard Shortcuts
If at any point you get a message that your phone is linked to another library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs it.
iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
Purchased applications can also downloaded over again if they are lost, see this article for details: How to redownload purchased applications from the App Store
For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod Touch or iPhone. You'll find that they have varying degrees of functionality and some will transfer data (such as playcounts and ratings), movies, videos, photos, podcasts and games as well.
A selection of iPod/iPhone to iTunes utilities:
Senuti Mac Only (iPod Touch & iPhone compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
TuneJack Windows Only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible) -
All the pictures and files that were migrated are in folders that I do not have access to on the mac now. They imported fine, but now I cannot access them, Any thoughts on how to get them?
What you can do is this:
Open the Terminal application in the Utilities folder. At the command line prompt and paste the following line:
sudo chown -R `id -un`:`id -gn`
Put a space after "-gn`" and drag the folder that has all the imported folders into the Terminal window.
Press RETURN. You will be prompted to enter your admin password which will not be echoed.
This should give all the files and folders the same permissions as your Home folder so you can access the data. If the folders with your files are not contained in a single folder, then create a new folder on your Desktop (COMMAND-SHIFT-N) and drag all the imported folders into this new folder. -
So I made the Switch, but.... (this is a long a read)
Hi Everyone,
I've been debating to switch for the past year now, and been visiting all the Mac forum sites. After all the hype and fun of Macworld, and after watching Steve's keynote on Tuesday, I decided it was the right time to buy. I bought a 12" iBook G4 stock from an Apple Store (not the closest Apple Store, but the second closest, which will be a factor as you read along), along with the Apple Care plan and a .Mac account.
3 days ago I booted up my iBook and was amazed at what followed: cool 3-D boxes flipping around, "welcome" in a variety of languages, etc.... I went through the complete process, then upgraded all the Apple software and started exploring Finder as well as a few aps. Around 30 mins into the experience, I noticed that the trackpad wasn’t really responding to my touch as the trackpad does on my friend's powerbook or the store's display iBook (by this, I mean that with my finger pressed on the trackpad, the cursor arrow still lagged a bit as I moved my finger; I even changed the speed of the cursor arrow under Preferences, but still experienced the lag). I thought nothing of it. "New computer, cold feet," I thought. "It will warm up soon enough."
I installed the driver for one of my compatible HP printers. Then I started to mess around with Safari. That's when I noticed that the ibook was bit slow to open Safari (the only things that were opened at the time were Finder and Dashboard, so I thought 512 gigs of ram would be enough to handle 3 aps at once....right?)..... played around with Safari, then closed it.
I went to open my Hard Drive, and doing that was also a bit slower than when I first opened it.
I then went on to install software for another compatible HP printer. At the last step, I got my first "spinning beach ball", and that ball kept spinning for minutes. At least 10 minutes. So something was not right. Using the key commands for Force Quit, the Force Quit Box popped open. But every time I tried to move my finger to force quit the application, the arrow cursor did not move. So I rebooted, pressing the power button.
Once the system rebooted, the final installation step for the HP printer appeared on my desktop. So I went through the same steps. Again, spinning beach ball for another 10 mins. Again, tried to Force Quit. Again, the trackpad failed to sense my movement, leading me to believe that the Fore Quit window froze, too. Again I had to reboot holding down the power button. (Am I wrong to think that the Force Quit box should respond as quickly as Window’s Task Manager box?)
Once it rebooted, I was able to uninstall the HP software, and I sent it to the traschcan. To end the day on a good note, I decided to move some photos and set up my desktop background pic. I am totally in love with the idea that my desktop background image will change everyday!
so day 2..........
Started off much more promising than Day 1. I installed office 2004, but had a bitchy time trying to install VPC. After realizing that I really don't plan to use VPC on this machine (it's free software b/c my school has an agreement with M$), I just uninstalled the set up assistant. I was able to set up a wireless network in my lab via the Airport Extreme I got a while back. No problems there.
I went out to buy a Logitech wireless mouse (the one that's Mac compatible and boasts " up to 1 year" battery life). Went home and downloaded the driver for the mouse. No problems with the cursor movements at all; in fact I had had no problems with the cursor movements all day. I thought that ibook got over the problems it had the day before. Man was I wrong....
I installed Firefox and Palm desktop. No problem. Then my friend---the one with the powerbook--- called to see how I was doing. He then helped me set up iChat. Then he totally freaked me out when he "called" me using the voice feature. I was blown away.
But about 20 minutes in, I couldn't hear him anymore. Then iChat froze while I was having a total of 3 buddy conversations. At this time, iChat was the ONLY ap open, so I was little confused as to why my desktop froze again.
Again, I tried to Force Quit using the key commands, and again, the Fore Quit Box did not respond to my movements. So I rebooted holding down the power button.
Once the system restarted, I noticed that the cursor arrow started to lag in time compared to my actual mouse movements. I double checked by using the trackpad, and low-and behold, like the night before, the cursor was slow to my finger movements.
I decided to shut down for the night and hopped back onto my PC to converse with my powerbook friend as what to do next.
Then it hit me: my HP laptop was being MORE reliable than my new ibook!
Today is Day 3. To my disgust, my first post on AppleNova is not about how great my new ibook it, but rather a post for help. It's a little ironic that I am typing this up right now on my HP, not my iBook!!!
so, any advice? is this the "routine" experience for breaking in an Apple product? Where might have I gone wrong? Or is this the computer equivalent to a "lemon" car?
should I use the Deluxe disc that came with the AppleCare package? Or should I just call Apple Care anyway? OR should I just march back into the AppleStore and demand a new machine? If so, the apple store I bought it is 30 miles away, but the nearest Apple Store is 12 miles away (can I return it to the nearest Apple Store, even though that it is not the store I bought it from?).......
sorry that this is a long thread, but from reading the posts from this forum during the last 6-7 months, I got the impression that this community was all about helping other Mac users, and I'd like to be part of the Mac faithful even if I'm having a bad first time
I've heard everything from "it could be HP drivers" to "take it to the Genius Bar" to "reinstall Tiger" to "Use the Hardware Check".........
iBook G4 Mac OS X (10.4.4) bought this brand new iBook --my first Mac--- this weekendFrist tip, after installing software updates (I assure your machine started off with 10.4.2 and when you first used it, you were promted to update to 10.4.4.), go into the utlities folder (under applications) open disk utlitity and verifity and repaire disk permissions, this will greatly boost preformace and may fix your problem. (In fact do this once a week) Go ahead and run the Techtool (Applecare hardware test CD) and check for any problems. If these come up with nothing, I'd call Applecare and tell them what is happening. Applecare will cover you at any Apple dealer and some Apple resellers as well. Going elsewhere will kill your warrenty BTW.
Maybe you are looking for
-
How to make use of a global internal table in SAP BW during transfer rules
HI friends, I am ABAP consultant working on some APO info cubes. I have an issue during the upload of planning area data into APO info cube. Please help. I am using a transfer routine to find the TECHWEEK from a data base table ZGC_CALWEEK based on t
-
Satellite P20-604 - How do I tell if it has a wireless card or not?
I have a P20-604, which I suspect was not pre-installed with a wireless card. Just to make certain my details are: Model No: PSP20E-0Du43-G3 Serial No: 14735613G If it doesn't have a wireless card, how can I determine which parts to buy so I can set
-
Batch process text document with automator
Hi all i would like to create a workflow with automator that look like that 1)open text file with textedit 2)"find and replace" 3)Save 4)Close my workflow works if i select one textfile but i didnt manage to make it do that on more than one text at t
-
I am trying to change my country from South Afrika to UK. I went into change ID, chose UK flag, changed everything to the new address. Logged into Apple Store, then got a message to verify account. Tells me invalid post code. Will not take anything e
-
Debugging fails to be activated in SM50 with endless loop
Hi Experts, I want to debug a inbounding mail processing and configure the handling class in SO50. Then I set a endless loop in the class method. Then when a new mail coming, Sever will hold a process of my class method. But when I go to sm50 program