I make recovery media in my pendive but i format my D Drive of which has recovery data ?

sir how will i make recovery drive from my pendrive ... i stored all data on my pendrive thourgh HP RECOVERY MANAGER but unfortunatteky i format my local disk D drive from my laptop which has hp recovery data can i solve this problem ?

Thanks for the feedback. The weblink you provided is the one that errors out. Below is the message that I receive. I will try contacting HP Directly.
Regards,
DC
The website cannot display the page
HTTP 500
Most likely causes:
The website is under maintenance.
The website has a programming error.
What you can try:
Refresh the page.
Go back to the previous page.
More information
This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
For more information about HTTP errors, see Help.

Similar Messages

Hi, I need to re-format my hard drive, as it has a virus, so will lose all my data including itunes. I therefore need to reinstall itunes - but if I do this will I lose all the music that I have bought? How do I reinstall music to the new itunes?

Hi, I need to re-format my hard drive, as it has a virus and is corrupted- so I will lose all my data including my itunes software. I guess I will need to reinstall itunes again - but if I do this will, I lose all the music that I have bought or imported into my library? How do I reinstall my library/playlists to the new itunes?
Thanks

Make a backup of your media and other important files.
Just to be safe, make a backup of your entire iTunes directory.
Restore computer or do whatever it is you need to do.
Restore your media and other important documents.
Install iTunes.
Try using search next time... this gets asked way too frequently.

If i put all my files on drive C which has the os and do a one key recovery, will i lose my files?

If i put all my files on drive C which has the os and do a one key recovery, will i lose my files? considering that drive C the the partition which has the os and the drive D has the lenovo drive which has all the lenovo drivers and all those. Will i lose my files?
Solved!
Go to Solution.

Never never put your documents in the C drive.
Many things can go wrong, and whenevr you have to reinstall os, your files would be gone! Take some pain now and partition the drive now, or you will feel helpless when your c drive is removed by failure of os or some **bleep** virus.
Simple solution: partition the C drive.
Step 1: download G-Parted software
Step 2: put it in live usb.
Step 3: boot your computer with the usb plugged in.
Step 4: then REDUCE THE SIZE of c drive.
Step 5: suppose you reduced by 100 GB, then divide that 100 gb into other drive. PUT your files here.
WARNING: I WOULD RECOMMEND TAKING BACKUP OF C DRIVE , AND THEN REDUCING ITS SIZE, INCASE SOMETHING GOES WRONG.
You can search in internet about partition and gparted.
Lenovo Ideapad U410,Ruby Red Color
i5 processor,4 GB ram,1 GB nvidia 610M GPU,24GB SSD,500GB HDD.

I can print from my iPad 3 but not from my new iPad mini which has a lower spec. What should I do?

Question. Why can I print from my iPad 3 but not from my new iPad mini which has a lower spec?

The "lower specs" have nothing to do at all with why you cannot print. Are you connected to the same Wi-Fi network that the printer & the iPad 3 is on?

HT4587 My airport express works on my mac but not I pad or I phone which has been updated to ios7. Ideas?

express works on my mac but not I pad or I phone which has been updated to ios7. Ideas?

You do know that the controls for AirPlay have been moved in iOS7, correct?
Is that what you are asking about here? If yes, you might want to read up a bit on the changes in iOS7.
Apple - iOS 7 - What's New
If you are asking about something else, we need more details about the issues.

Need to make a copy/clone of a table which has sdo_geometry data type

Folks,
We are running Oracle 11gr1 on Suse Linux platform.
We have a requirement, where we need to make a copy of a table, in the same database but in a difference schema, the source table has about 130 millions rows and also has the sdo_getometry data type.
I tried materialized view, but MV does not support sdo_geometry data type.
According to one of my DBAs, doing it via data pump , will take few days, which is not acceptable.
Is there a way, we can make a copy of this table in the same db ?
Thanks
Ashish

Siva,
This is not for backup purpose.
Here is the background information on this requirement.
I need to have a static copy of a table, which has spatial column, sdo_geometry in it.
So we can run another application against this table, just read-only, since we need static data, data in the source table changes quite often.
One of my DBA suggested to have another instance/database, to keep the copy of the source table, I thought idea of having another database just to keep a copy of a table is an over kill.
That is why I had asked this question and you had provided a viable solution.
Then we need to refresh this table , with the data (changes) from the source table, maybe once in 2- 3 weeks.
I tried creating a Materialized view, but it does not support Spatial columns.
So now I am trying to figure out, the most efficient way to refresh the clone table from the source table.
Regards,
Ashish

Formatted external hard drive from PC to Mac - Data Recovery Needed

I formatted an external hard drive configured to (PC) for a Mac.
I clicked erase data by accident during the process of formatting -- My old files are no longer there now.
Is there a way to recover the old files that I had on there before the reformat?
Someone please say yes and tell me it's possible......

Not very likely.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

How do i make my media files read from a file stored on a drive other than C:\

So i use itunes on my computer at work for music all my music is stored on a external hard drive, i have a roaming profile on my account at work but when i add music to myh itunes it won't let me use my roaming profile, i know it allows me to change the file location it sales to but when i do this it always makes the file be in the default c:\ drive when i want it in another location any ideas how i can make this go where i want it too?

Not quite sure what your current state of play is but my post on how to make a split library portable might help.
tt2

Lightroom just created a new 2014 folder to receive images from 2014, but I already have a 2014 folder which has received all my previous images. How do I get the system to keep using the original 2014 folder?

How do I route newly created images into my existing folder for 2014? Why did the system create a new folder which seems to be snatching all my new images?

Well, something is not making sense here, and I might have to spend some time thinking about it, or hopefully someone else will know exactly what the issue is.
The first screen capture you provided shows the Lightroom Folder Panel, with folders on the C: drive named 2012, 2013 and 2014 and then the problem second 2014 folder, followed by many folders whose name begins with "My Canon".
The most recent screen capture you provided shows the C: drive problem 2014 folder, but none of those other folders!
Can you show us a screen capture of your Windows Explorer C: drive folders? Particularly, can you expand the folder structure so that it shows where the 2012 and 2013 and original 2014 folders and the problem 2014 folder are located? If that takes 2 or more screen captures, that's fine. ALso, if you can show the "My Canon" folders, please do.

3rd-party software to make RAID 1 (mirror) on a drive that already has data

Is there software which lets you simply add a 2nd drive to an already working Mac and make a RAID 1 mirror without waiting for the following:
- clone the internal drive to an external for backup
- add the 2nd internal drive
- erase both internal drives
- make the RAID 1 set out of both drives
- clone the data back to the RAID 1 from the external
This works just fine. It just takes a long time and requires extra external drives to boot from and do the cloning.
What I'm looking for is a utility that will reduce the process to:
- clone to external for just-in-case backup
- add the 2nd internal drive
- use the utility to mirror the 2nd (new) drive to the pre-existing data on the 1st drive and make a RAID 1 mirror set out of them (without erasing them)
- there is no step 4. there is no step 4! (ha ha ha)
in short: to make an OS X RAID 1 without having to erase a drive that already has customer data with the Disk Utility or some other software
I checked Made4Mac already - none of the listed partitioning tools seem to be able to make a RAID "in place". I'm assuming this is not easy or Disk Utility would already be able to do it.
It's too bad the Disk Utility can only make a RAID 1 using blank, virgin drives. Maybe they'll fix it in Leopard. Can anyone from Apple comment?
I know about SoftRAID - but it's $149 per seat. I'm looking for something I can use on customer machines over and over again, without having to sell them a software license - like Partition Magick or DiskWarrior.
Thanks!
RAID 1

IKE-D-
Why not use the CLI and do it that way? i don't know it AppleScript hooks into the terminal and/or can run terminal commands but that may be worth looking into as well.
I would think that it would be a good idea to erase all your drives in the RAID at once and start fresh. Why not back up the internal to a pair of RAIDED external FW800 drives, add the second drive in the Mac, make the internal RAID by formatting both drives and then copy the external RAID back to the internal RAID? Oops, I know, now we have a step 4.
Nobody from Apple ever comments here. We are all users, just like yourself, that just want to help.
Luck-
-DaddyPaycheck

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

My ipod shuffle cannot be restored not by the itunes nor by the reset utility it tolds me that it is in recovery mode , i tried to make every thing to resolve it but i can not what can i do ?

my ipod shuffle cannot be restored not by the itunes nor by the reset utility it tolds me that it is in recovery mode , i tried to make every thing to resolve it but i can not what can i do ?
notice : when every time try to reset it by the retore utility it tolds ( your i pod obtaining information from your ipod)
and when i tried to restore it by the itunes it tolds ( there is an unknwon error num 1415)

Now the iPod is unusable with the Recovery mode loop. The full error below:
"iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
I can see my IPOD under devices on the left pane of iTunes while the error displays. But when I click OK, the IPOD disappears under DEVICES as does the DEVICES category.
and also when i remove my ipod from computer it isn`t light any light never the battery show

I have hp pavilion dv6-3113st i try to make recovery from my disks but give me error 0xe0f00013

i have hp pavilion dv6-3113st i try to make recovery from my disks but give me error 0xe0f00013

Hi
As per the error it shows that the Recovery partition on the unit is corrupted. Please contact HP Technical support and order for the set off Recovery Disc.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Can't make Recovery DVD "recording failure when writing disc 1 (20)" C500 with Vista

I keep getting this error every time I try to make recovery dvd's. I did a restore to factory condition and still get this error. I even swapped out the DVD drive and still get the same error. Did a google search and this seems to be a common problem but didn't find any resolutions. This is a Presario C500 with Vista Basic and this is the first time I've tried to make Recovery Discs. Thanks

Did you use high quality DVD+R media?

Nstalling Photoshop Elements 13 and Premiere Elements 13 but I have no disc drive. Is it possible to install and register it online?, I bought at Media Market the CD for installing Photoshop Elements 13 and Premiere Elements 13 but I have no disc drive. I

I bought at Media Market the CD for installing Photoshop Elements 13 and Premiere Elements 13 but I have no disc drive. Is it possible to install and register it online?

I was in the same boat as you, so I went to Best Buy and purchased the box (on sale, by the way). I then downloaded the trials separately for Photoshop Elements and Premiere Elements from the Adobe product site.
In the box you should have been given 2 discs (one for Photoshop Elements (PS) and one for Premiere Elements (PE)) and something called a "redemption code" on a square of colorful cardboard with instructions on how to get your serial keys for installation. The single redemption code is NOT the serial/product key you use to install your purchase. Once you follow the instructions on this card you will be shown two serial/product codes, one each for PE and PS. Write them down, print them, whatever, you will need them during installation.
Now go to the downloaded trial file(s) and run the installer, either for PE first or PS, it makes no difference. During the installation you will be asked if you want to start a trial or use a serial/product code. Choose "I have a code". Enter the product key and you will be golden. Repeat for the other program.
Hope this helps!

I make recovery media in my pendive but i format my D Drive of which has recovery data ?

Similar Messages

Maybe you are looking for