I-mate K-JAM and Nokia E61 Help with settings

Hi,
I used to be able to conect to my works exchange server with my i-mate. I can not seem to get it right with the Nokia. Could view my e-mails and sync my calender with the i-mate.
Settings in the sync function of the i-mate:
Server configuration
Server address - [email protected]
This server requires an encrypted (SLL) conection
User name
Password
Domain
This would then uatomatically sync my calender and e-mail
Can one do the same with an Nokia E61?

I have a K-Jam and love the heck out of it!! I've had several HTC products and found that this has been the best yet. No problems. I highly recommend it.
As for getting it setup with my iBook, that's been a bit of a pain. I can't seem to figure out how to dial to GPRS. Did you accomplish this with your 910? If so, how????? I've got the iBook and K-Jam paired, and it sees it as a bluetooth modem, but I can't figure out how to setup my t-mobile. Any comments would be great!
Thanks,
Tom tom(at)thenielsennet(dot)com

Similar Messages

Nokia 2710 plugged in Mac. Help with settings,plea...

Nokia 2710 plugged in Mac. help with settings,please?
When I plug Nokia 2710 in USB in Mac computer OSX 10.6.4, I see 3 options:
1. PC suite
2.Print &media
3. Data storage
My questions are about option 1. PC suite.
When I select it, I can see in Network Preferences
2 icons for Nokia phone:
Nokia 2710c
and
Nokia 2711
and on the Network Preferences pane there are options to configure them with options to set telephone number,account name and password.
(My Nokia 2710 is connected and works with mobile phone network Virgin in Australia)
How exactly to set these configurations and how to use them?
And which one to configure - Nokia 2710c or Nokia 2711?
Thank you in advance for any practical advise!

@JuliaAU
Although your 2710 Navigator is a S40 device, here are two resources for you:
http://www.nokia.co.uk/support/download-software/device-as-a-modem/connect-to-your-mac/connect-via-u...
http://klauskjeldsen.dk/setup-internet-connection-via-bluetooth-using-nokia-6300-on-mac-os-x/
Probably would try 2710c first and watch out for any capitalisation in VirginInternet
Something at the back of my memory suggests that you may need to create a new location in Network Preferences but I maybe wrong here.
Happy to have helped forum with a Support Ratio = 42.5

SyncML and Nokia E61

I am trying to get our Calender to sync wiht my new Nokia E61. A collegue with a Nokia E60 has no problems syncing, but the E61 just wont do it.
The ocas_log mentions:
DATE = Thu Jan 11 18:01:02 2007
PID = 19936
TID = 109128624
LEVEL = error
CLASS = Error::Syncml::Adapter
CODE = 000F-01-00-00000007
MSG = The output buffer could not be retrieved from the SyncML toolkit
I allready installed all certificates of the server and the CA since i read somewhere that that might be a problem.
Any help is deeply appriciated

Sorry. Doesn't look like anyone ever answered this.
My apologies.
The latest 10g sync server does support most of the
newer E-series phones including the E61 and E61i.
Nokia did make some changes in the latest sync client
implementation that caused issues but they have since
been resolved.Hello.
You say these issues have been resolved but by which side : Nokia or Oracle ?
If Oracle, is it in their latest OCS10g release (10.1.2.4.2 ) ?
Thanks.

Airport Snow and Nokia E61

So I am trying to use my Airport Snow with a Nokia E61 with no success. The E61 can see the Airportstation without problem, but as soon as I try to connect to the internet I get a error. I made no security settings on the Airport and it is working because I can use it with my Powerbook. Also I can use the wifi of a neighbor who also has a open wifi so some setting in the Airport is blocking the E61 ... anybody got this working?

Yes you can use the MacBook Pro with the snow (dual Ethernet) AirPort base station (ABS).
The snow ABS is based on 802.11b.
The MacBook Pro has 802.11g built-in.
Since 802.11g is backwards compatible with 802.11b, the MacBook Pro will work with a snow ABS.

I've just came on board from Andriod and need massive help with the Contacts application any one out there willing to help the 'noob'?

I had the folks at the store port over all of my contacts from my old
ratty Andriod phone to my new shiny iPhone.
however all 200+ of my contacts sort of "shook" out,
meaning say John Smith, on my old phone,
had in my contacts the following:
John Smith
123 Main St. Anytown, Anystate USA
555-826-4879 home
555-799-4247 cell
[email protected]
johnsmith@facebook
all nice and neat on my andriod but when it ported over
all that information was just scattered all over my contacts sort of like:
john smith, smith john
john smith 123 main st. etc.
johhn smith home 555 etc.
john smith cell 555 etc.
john smith johnsmith@ etc.
etc.
so for all those 200+ contacts in my phone, I've got a zillion of them now...
so I'd like to get this all back in order before I and Siri explode.
I know nothing, and I know even less about outlook and the sort.
But I do know I am in Dire need of help with this... I figured that eveything else
involving iphones and apple in general was supposed to be cake but it seems
like this is the only thing that isn't cake at all... unless, I'm just a right idiot. (which is possible, hence spelling and grammatical issues).

I believe I've tried to sync it with google, but it didn't seem to take
muchless take my calender. it seems to favor my facebook calender
more over my google calender, but Siri seems to be helping me re-write
it...but that's not the game here, it's the contacts. I've tried to export
the cvp (??) list and import it into my iTunes account. However, It only
doubled my issue because it didn't over write my existing contacts.

Muse and the beyond annoying and awkward menus help with French titles with accents that don't work?

I am doing a French/English site. The only way I can do this is do two sites and then do creative linking. That sucks. Go Live allowed me to have as many pages as I wanted and Menu Machine worked pretty decently as it allowed me to have different menus so a bilingual site was a piece of cake. Now I have to do two different sites and the problem is some of the page names in french have accents as needed in that language. The village idiots at adobe did not take that into account and now of couse I have an issue and will need to create navigation for the french elsewhere and import as a graphic. This is beyond stupid. Anybody have a solution. Adobe told me too bad so sad the software is in its' infancy. Well then why the hell did they get rid of Golive which worked well for designers. Because Muse is so dumbed down I am not able to do anything about the menus as the menus are dictated by the page names. If you decide to do a manual menu you can not have just words with state changes as the bloody menus sytem will not allow that. The design requires just the words having state changes this is not abnormal. REALLY. I am beyond frustrated and pissed off and equally pissed off Adobe hangs us out to dry not even having phone contact just some dudes in Inia on the chat which sucked. Any solutions? Anybody at Adobe actually understand this is a problem and might suggest it will be fixed in updates but in the meantime help me solve th eproblem easily. I can live without stupid scrolling I would rather have solid software that is easy to use and some degree of fleixibility if you are a seasoned designer who does a lot of web. But dumbed down for the folks who just want to do a simple site. Yikes this is frustrating. Any help would be appreciated.

Village idiot here, apparently...
In Page Properties you can independently set the page name (used in menu widgets), the page title (displayed in the browser tab) and the file name for the .html file for the page.
To create a menu where only the appearance of the text change across states:
1) select a menu item
2) select each state in the State panel and click the trash can to clear all pre-existing state-specific formating
3) choose the Normal state and set all the text formatting that will be the same across all states
4) select mouse down, roll over or active state
4) set the text properties you want for that state in the Text Panel
5) repeat for the other two states
6) you may want to set the fill and stroke on the menu item Normal state to none, so only the text of the menu items is visible
The automatic "All Pages" and "Top Level" pages menu functionality is currently limited to being site-wide, so for the multi-lingual site you describe your choices are to have one automatic and one manual menu, two manual menus, or create two sites. It depends on the size of your site, the complexity of your menu and your personal preference which is best for your case.
If accents are not being preserved through your workflow, please share:
1) URL for an example page that demonstrates mangled accents
2) How you're uploading your site? Publish to BC? File > Upload to FTP Host? Export and external FTP client?
3) If you're not hosting with Adobe (BC), who's your hosting provider.
If accents are not being preserved that generally indicates a problem with how the files are being transferred to the server and/or a problem with how the server is configured. The output of Muse fully supports accented characters throughout the workflow.
Many members of the user community are active here, along with the technical support team and several members of the development team, like myself. We generally respond most effectively to clear questions with screenshots, URLs of example page, etc.
There are a lot of tutorials, videos, templates, widgets, etc. available online from Adobe and other sources:
http://muse.adobe.com
http://lynda.com
http://muse-themes.com
http://musegrid.com
http://qooqee.com
http://muselayers.com
http://museresources.com
http://museworld.com
etc.

HT5699 The country I am living in is not on the Apple Contact Support list and I need help with my security questions.

I am currently living in Tunisia but it's not on the Apple Contact Support list. I need help with my security questions which I cannot remember the answers. There is no link to send a reset email. What do I do?

Click here and ask the iTunes Store staff for assistance.
(114040)

Ipod Nano 6th generation setting issue - hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock

Combining CG and DV. Help with the shimmer effect?

Hi all,
We produce a fair amount of computer animation (prediminany for the real estate business... aka lots of buildings with straight lines). The short videos we are putting together often combine DV footage with computer animation. We often move the "camera" in Final Cut across still images of buildings, and a bit of anti-aliasing seems to address the jaggies that come from having tons of lines move on angles.
However, our main problem is with the actual computer animation. When playing back the DVDs on, say, an LCD television, the DV footage looks great but the computer animation looks aliased and crunchy, especially on shots that rotate around a building where there are a ton of converging lines.
My thoughts are this: should I be dealing with this with the field selection? I am assuming my DV footage likes to live in lower-field land, but that my CG is progressive. Can I do something to syncrhonize the two? Could it be that when I create my DVD, and select "Lower" or "Progressive" as the fields that I am killing the quality of one or the other?
I'm not sure if it related, but the DVDs also look like unusable garbage (jagged, crunchy) when I test play them on my computer (23" LCD @ 1920). I know the DVD is scaling to fit the screen, but is there any way to step up the results so they look great on TV and a computer?
Looking for some guidance from the Compressor gods. Lots of queries here, but overall I am just trying to understand if there is a protocol for editing together CG and DV to a DVD so that it looks fantastic.
Thanks all!
Ben

Hi Jerry & Thanks. I always appreciate your comments.
I set the HDV camera to send via log & capture HDV. It has a feature to send it via HD, but that feature wasn't enabled. It seems like when I checked before it was reading as 1080i. When I last checked it read 720. So not sure, but will recheck later tonight and see what happens with a fresh log & capture session.
I claim utter plebe status... so bear with me...
My take is that I shoot in HDV because the resolution is tighter and better in lower light conditions. If I downconvert, aren't I dumbing down the video that I shot in HDV to "match" the DV?
I thought that it would be interesting, in a disparate sense, to use both the HDV and the DV footage together. The differences are of interest to me in a comparative way.
That said, my interpretation of using DVDSP4 was that with DV, field dominance is set to "lower", and HDV it is set to "higher".
And I was also assuming that DV = 4:3 and HDV = 16:9. Which seemed like another bump in the road...

Can someone help with settings on WRT54G on a bridged modem?

I have a motorola 2210 modem, and I know that in order for you to bridge it, you have to go to 192.168.1.254 and change the PPP settings. Now, can someone who ahs done this walk me throught the modem and router setup in order of what they did. I just tried it, and I ended having to reset my router and my modem because i massively screwed up and lost my internet connection. I tried linksys and I didnt get much, and I tried att and they wouldnt help because of the router. I just need the exact steps to do this.

For Converting the Modem into the Bridge Mode...Check this link.
After converting the modem into the bridge mode,you need to configure the linksys router with PPPoE settings..Check this link.

How to pop up "save" and "open" window - Help with construct xml

In my report there is a column link which is pointing to another HTML page that has xml data displayed in a textarea field. So when user clicks on the column link, he gets to directed to the page that have the xml data in text format.
My question is, how can i make the xml data display as a file, so when the user clicks on the column link, a window with "save" and "open" will pop up so the user can save the xml data as a file?
Has anyone done something similar like this? any help is appreciated!
Regards,
gina
Message was edited by:
gina

Thank you Tine, I tried to use the 'Export XML' report template and tried to do the following query:
SELECT XMLElement("oai_dc:dc",
XMLAttributes('http://www.openarchives.org/OAI/2.0/oai_dc/' AS "xmlns:oai_dc",
'http://purl.org/dc/elements/1.1/' AS "xmlns:dc",
'http://www.w3.org/2001/XMLSchema-instance' AS "xmlns:xsi",
'http://www.loc.gov/mods/v3' AS "xmlns:mods"
XMLForest(
dctitle AS "dc:title",
dccreator AS "dc:creator",
dcsubject AS "dc:subject",
dcdescription AS "dc:description",
dccontributor AS "dc:contributor",
dcdiscovery AS "dc:discovery",
dctype AS "dc:type",
dcformat AS "dc:format",
LOWER('ksl:posters-' || dcidentifier) AS "dc:identifier",
dcsource AS "dc:source",
dclanguage AS "dc:language",
dcrelation AS "dc:relation",
dccoverage AS "dc:coverage",
dcrights AS "dc:rights")) AS "RESULT"
FROM table_name
and here is what returned in the “save as" file:
<?xml version="1.0" encoding="utf-8" ?>
- <XMLREPORTREGION>
- <ROW ROWNUM="1">
<RESULT>[datatype]</RESULT>
</ROW>
</XMLREPORTREGION>
How can i construct the query so that it returns the data in xml format like the following?:
oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title>Rose</dc:title>
<dc:creator>Smith Black</dc:creator>
<dc:contributor>Smith Black</dc:contributor>
<dc:type>Stencil</dc:type>
<dc:format>image/tiff</dc:format>
<dc:format>image/jp2</dc:format>
<dc:description>13 3/4" X 9 1/2"</dc:description>
<dc:relation>Some collection</dc:relation>
<dc:date>1987</dc:date>
<dc:subject type="LCSH">Art Project</dc:subject>
<dc:subject type="LCSH">........</dc:subject>
<dc:subject type="LCSH">.........</dc:subject>
<dc:language>eng</dc:language>
<dc:rights>......<dc:rights>
<dc:identifier>.....</dc:identifier>
</oai_dc:dc>
I don't know much about xml, any help would be really appreciated.
Thanks,
gina
Message was edited by:
gina

Brand new to the Mac World and NEED SOME HELP with startup disk issues

Hello everyone. I am a new Mac user and I purchased my mac on ebay. It's an iMac that came with tiger 10.4.11. I wanted to get a fresh start on the computer, since the person who had it before me did not erase all of his stuff. I didn't know what to do so I got a startup disk/install disk off ebay also. When I go to install it says "software cannot be installed on this computer." Before I bought the software, I had called the apple store and they said it should be fine to buy any install software to put on the computer. If I could get any help it would be appreciated. I had read previous threads that I should hold down c when I start up (didn't work) or that I should select archive or erase and install (I never got these options when I went to install).

A warm welcome to the Discussions!
What iMac is it? I only ask as the Retail Tiger CD/DVDs don't work on IntelMacs, only PPC, (G3, G4, G5 Macs).
Sorry what you were told by the Apple Store, but if it's a Gray CD/DVD then it is Machine specific as Neil stated.
Sooo, what exact iMac is it, and what does it say on the CD/DVD?

New to the World Mac and I need help with the internet?

Hi All,
I've purchased a second hand eMac from a local College last summer and I've finally got around to connecting it to the internet (after 20 + years of working and using PCs). All is great or I thought???
There is a few problems that I still encountered and hopefully someone can help?
The spec of the Mac is 1 GHz PowerPC G4 (768 MB SDRAM) running Mac OS X Vers. 10.3.9.
For the internet I connect via Safari 1.3.2 (v312.6). However, I cannot access Hotmail, selected sites outside of the UK and also when I go into Facebook the interface (layout) is a mess and I can't access various options available. I tried to download Safari 4.0.4. for SnowLeopard, but it won't allow it as I don't have the Billings of Materials?
Does anyone know how I can resolve the above or point me in the correct direction.
Many thanks in advance, JJ

Welcome to the Apple Discussions!
Version 1.x of Safari is old in Internet years, and many sites using advanced coding (or non-standard coding) won't render properly. Later browser versions have more support for the non-standard HTML that for instance MS webpage programs generate as well as support for more recent authoring tools. Which is a long-winded way of saying you're on the right track, you need to update your browser.
The later versions of Safari require OS X 10.4 or later. Your eMac can be upgraded to 10.4 or 10.5, but it'll be easier to first try a free third-party browser such as Firefox or Camino or Opera (Version Tracker and MacUpdate are good links to start from when looking for software and updates).
Note: moving among different browsers on different platforms, I can confirm that it's all too common for sites to render differently, with layouts off from a little to a lot.
As for being blocked from non-UK sites and Hotmail, if that still crops up with Firefox, check to see if the school that sold you the computer had proxy servers set yp that might be blocking some sites. You can also go to Apple menu, System Preferences, show built-in Ethernet or Airport depending on which one you use, click on the Proxies tab, and see if anything is checked/active there.

I keep on losing my tabs and i am getting seriously frustrating as i need them to open each and every time i open firefox 4, i have tabs mix plus. why does this keep on happening? please help as i am a student and i need help with this..

i have now installed too many tabs 1.3.3 to see if that will fix problem.
but yes each and every time i use firefox, not googlechrome, or ie or opera but only firefox 4 and having used tabs mix plus before i never had a problem.
but now with firefox beta and now the full release, the issue is still arising. evrytime i open firefox i close my eyes and wait for it to load... and load... when it does open, i open my eyes and lo and behold my tabs are gone.
thats it please help guys, i love firefox for many reasons i dont want to use opera.
regards
ehtisham

'''[https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/ Adblock Plus]''' {web link}
Blocks annoying video ads on YouTube, Facebook ads, banners
and much more. Adblock Plus blocks all annoying ads, and
supports websites by not blocking unobtrusive ads by default (configurable).
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

I recently got a used iPod touch from a relative. Version 3.1.3. She does not remember her restrictions passcode and I need help with that. Also, my iTunes does not recognize it. Someone please help me.

I Recently got a used iPod touch, version 3.1.3. I do not know how to reset everything. First I have tried to reset all settings, but it asks for restriction code. Also, my iTunes does not recognize it. Please help!

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

I-mate K-JAM and Nokia E61 Help with settings

Similar Messages

Maybe you are looking for