I meet a big problems with my Z 10 , Who can help me??

i can not log into the BBW(it said the BBW meet a problem and i should shut down it), and i can not use the BBM with the WI-FI (it works with the data serivices), any one can help me, i really need your help???

No need for duplicated threads:
http://supportforums.blackberry.com/t5/BlackBerry-Z10/NEED-HELP-FOR-limitied-WIFI/m-p/2876174#nobann...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Pls: I have some problems with GOP java card. who can help me?

hello, all
I am going to install my cap file into Global Open Platform Card( S1-TiEx-S32J, which uses GP2.0.1) now.
but, I have failed.
I use J2SDK1.4.2.10 when I compile the java file.
And use Java Card 2.2.1 Development Kit when I convert to cap file.
The sequences of the command / response are below;
[SEND]00A4040007A0000000030000
[RECV]611F
[SEND]00C000001F
[RECV]6F188408A000000003000000A50D9F6E0A42505042474F317601019F6501FE9000
[SEND]80500000082021222324252627
[RECV]611C
[SEND]00C000001C
[RECV]0000FFFFFFFFFFFFFFFF0000E1C81BD9C2573DF5AA8EEB95251A95A59000
[SEND]8482000010A8BD185CD6A3940C83855021A4DFF412
[RECV]9000
[SEND]80E60200050000000000
[RECV]6700
What was wrong?
If you are experience with this kind of java card, pls help me.
with best regards,
yong lee

Andalib3,
There are a couple of options that you have as far as getting this to work. First off go to Control Panel and then to Sounds and Audio Devices (or multimedia depending on the version of windows). In here go to the Audio tab and then under preferred Midi Playback Device you should have a couple of options. There are two settings here that will work:
) Microsoft GS Wavetable Synth - This is a very basic midi sound set that is emulated by the OS
2) Li've! Midi Synth (A or B) - This is the hardware midi synth on the card.
Make sure one of these is selected as the default midi playback device and then test your games again.
Jeremy

Problems about deploy a adapter.Who can help??

I confirm that the zip file path is right.I use the winrar to create the rar file,and use the winzip to create .sda file.
Who can help??Thanks very much
===========================================================================
Deployment started Wed Sep 13 13:54:19 GMT+08:00 2006
===========================================================================
Starting Deployment of cmbc.accenture.connector
Aborted: development component 'cmbc.accenture.connector'/'sap.com'/'SAP AG'/'7.0004.20050713150837.0000':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: com.sap.engine.services.deploy.container.DeploymentException: Cannot update archive file cmbc_ra.rarerror in opening zip file. Reason:
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment of cmbc.accenture.connector finished with Error (Duration 5609 ms)

Hi Sky,
Please ensure that the content of cmbc_ra.sda is the following:
- META-INF (check in all files if all the names are comliant for your adapter structure)
- cmbc_ra.rar
In the cmbc_ra.rar
META-INF (check the content of ra.xml file)
cmbc_ra.jar
Hope this help.
Francesco Bersani

Massively Mail-problems since using Mountain Lion :-( who can help?)

Dear Community,
first time I need be excuse my long text but it's the first time I use a discussion to sort / find solutions!
First I like to describe a bit the situation:
Our company use since years very successfully Kerio Mail Mail-server which is an Multi-platform Exchange solution...
In the past we never ever ad have problems with the solution and was very happy with it about the reason that it was after many tests the only platform which had have worked on all in our company used plattforms (Apple, Windows & Linux)...
Since mountain lion we realize several problems in the Mountain lion and become about this unlucky Apple users:-(
Final we hope to get over this way's solutions and lucky users again..:
Attached the short list of problems:
1.) View day's ago me and an other employ had have changed into new MacBook Pro with Mountain Lion (first time on Mountain Lion!) where we first at all become the problems that all with Mails, then already read'n Emails are becoming unwritten marked and now my postbox have 35000 and more unread'n emails and it is no more possible to check which I have read already and which not!
2.) Also the Emails in the sent folder become the same problems :-(
3.) One other big problem is that since this change the connectivity from mail to our sever looks like 1000times more, than my 5GB Mobil Data-stick was empty after 2 days using Emails!
--> In the past I had have never ever need more the 1GB in a month!
4.) Also a big problem realized here in Asia where I traveling actual my outgoing Emails are not sent out from my MacBook Pro (just from my iPad and iPhone!)....
--> Our system administrator explains me that this are about the "missing" ActiveSync from the Apple Email!?!
Hopeful become here ASAP answers / solutions to solve all my problems and become again a happy Apple & Mail user :-)
All the best
Thomas

You said,
the blogs I subscribed to via RSS feed disappeared from iMail
See this thread on the Apple discussions forum:
*https://discussions.apple.com/thread/4143746 RSS and Mail Error
This looks to be issue with the Apple iMail application in Mountain Lion, which apparently no longer includes an RSS reader. You'll have to find another RSS reader application or Firefox extension (check with add-ons.mozilla.org for RSS reader extensions).
You could also try the Firefox [[Live Bookmarks]] feature to subscribe to feeds: First, add the "Subscribe" icon back to the Firefox navigation toolbar, if necessary (see [[Customize Firefox controls, buttons and toolbars]]). Next, go to Firefox -> Preferences -> Applications and change the action for "Web Feed" to Live Bookmarks (the default is "Preview in Firefox"). See [[Set how Firefox handles different types of files]] for details.

Pages with Adressbook (and Bento) – who can help?

I created the fields in my pages document as required. I imported an address from addressbook. That worked.
Then I imported an address from addressbook that I previously imported in adressbook from Bento (in Bento). It imported the Name and company but not the address like street and city. It seems that it does not recognize the address as an address?
Can it have something to do with the German version? Because the address created in Addressbook worked, the one from Bento not. What can help?
Thanks for helping me,
Michael

Michael Munich wrote:
New idea: I opened the .csv with TextEdit and replaced the ; with ,
at the moment I am in the middle of the importing process in addressbook and hope this will work.
What will you do for decimal numbers containing a comma ?
But I assumes that there is no such datas in a list of address.
This huge oddity: a program from Apple and a program from a 100% Apple's subsidiary which don't speak the same language is already reported to Bugs hunters.
Yvan KOENIG (from FRANCE vendredi 8 août 2008 17:23:54)

Network in System Prefs won't load - in this big world surely there is someone who can help me!

After returning home after a house refubishment, had to get TalkTalk engineers to reconnect me. Now have internet and Fibre Optic access. But, when I click on the Network icon, it keeps saying: Loading Network ...' But never does. I am not very computer savvy. Nobody in these communities speak English, so to speak. I can see that people are looking at my pleas, but nobody is replying. Hair being pulled out as I type! Please help.

I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.

I can't download the apps with big size like need for spees, but in apps with normal size(less than 100KB)there is no problem,is there any body who can help me?

I can't download the apps with big size like need for spees

Have a little patience. 4 minutes is only a short time for someone to find your post and reply to it. Also clicking on "This Solved My Problem" marks your problem as solved so many folks that may otherwise help will pass the question by since it is "solved."
I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Big problems with Firewire iPod and camcorder - please help!

Hi all,
I don't know where else to turn with this problem. I think I've damaged my Firewire kit.
I have an iPod 4G 20GB and a Canon MV901 MiniDV Camcorder. I used them both over Firewire with my Pismo without difficulty, but I then tried video editing on my Windows machine with a firewire PCI card. Scrabbling around the back of my computer, I think I somehow managed to get the firewire cable to the camcorder in the socket upside down, reversing the power and data conncectors. Nothing really happened, but the camcorder stopped showing up. I tried it a good few times, then tried my iPod. By some bizarre coincidence, I think I managed to plug the iPod in the same way. Now, my iPod doesn't work on either the Windows machine or the Pismo over firewire, but does over USB2.0 on my Windows machine.
I measured the power going through the Firewire power pins as around 13.5 volts on my Pismo and the card, but the card also has an auxiliary power connector. This was disconnected when I tested it, but was connected when the iPod and camcorder were.
The thing I would like to know is whether a voltage spike of this size could fry the firewire controllers on both devices. The iPod's diagnostic mode detects that firewire is connected, but will not show up. Strangely, it still charges over firewire from either machine. Have I permanately damaged the firewire controllers?
Thanks in advance,
Rob Johnson

Rob,
If you mistakenly inserted the FireWire connector twisted 180 degrees, the power lines can be directly connected to the data lines and can result in a fried PHY (connects the port to the FireWire bridge) or the FireWire bridge itself.
You can take a look at the voltage specs for FireWire ports and see that your voltage readings are well withing specs:
http://docs.info.apple.com/article.html?artnum=58207
I am not sure where you go from here. You could try a known-good FireWire device connected to your Pismo and see if it works. If not, the data-side of the FW port may have failed. I don't know about testing the iPod or camcorder.
A possible cheap fix for the Pismo FireWire is a FireWire PC card; if running 10.x, it will just be a plug & play affair. However, unlike built-in FireWire ports, FireWire PC cards supply very little bus power. Your camcorder will work since it has it owns power supply (assuming there is no hardware failure) and but am unsure about the iPod. The iPod will not charge, of course, but it may still work in data transfers. There are a few FireWire PC cards that also have their own power supply.

Big problem with my iPhone 3Gs. Can't activate iOS 5... I'm already using at

HELP!

are you able to see the apps on the home screen? If so, it's most likely an issue with your carrier
This is also an issue that can appear on devices that have been modified in an unauthorized manner (not judging, just saying)

I'm having BIG problems with Leopard/Windows XP networking. Help!

Hi. I have a Leopard laptop and a Windows XP (Home, SP3, 32 bit) desktop and all of a sudden, VNC, file sharing, and printer sharing stopped working! I'm trying to access the desktop by VNC and print to an HP printer on the desktop. Can someone help me out here?

Networking spontaneously started working again, but I posted another topic about a spontaneous issue in Mail.
http://discussions.apple.com/thread.jspa?threadID=1735897&tstart=0

I can't get my email wright with my planet account, who can help

I had an planet internet account, planet is now from kpn. But if i fill in these settings, it doesn't work

Gordonr18571658 I am sorry I don't have any additional suggestions for how to install Photoshop Elements 1.0 besides installing in compatibility mode for Windows XP.
As an alternative you can find details regarding Photoshop Elements 13 at Picture editor, edit pictures | Adobe Photoshop Elements 13. Photoshop Elements 13 has been designed to install and function under Windows 8.1. There is a 30 day trial if you wish to evaluate the software and complete any current photo editing projects you may be facing.

I will pay for who can help me with this applet

Hi!, sorry for my english, im spanish.
I have a big problem with an applet:
I�ve make an applet that sends files to a FTP Server with a progress bar.
Its works fine on my IDE (JBuilder 9), but when I load into Internet Explorer (signed applet) it crash. The applet seems like blocked: it show the screen of java loading and dont show the progress bar, but it send the archives to the FTP server while shows the java loading screen.
I will pay with a domain or with paypal to anyone who can help me with this problematic applet. I will give my code and the goal is only repair the applet. Only that.
My email: [email protected]
thanks in advance.
adios!

thaks for yours anwswers..
harmmeijer: the applet is signed ok, I dont think that is the problem...
itchyscratchy: the server calls are made from start() method. The applet is crashed during its sending files to FTP server, when finish, the applet look ok.
The class I use is FtpBean: http://www.geocities.com/SiliconValley/Code/9129/javabean/ftpbean/
(I test too with apache commons-net, and the same effect...)
The ftp is Filezilla in localhost.
This is the code, I explain a little:
The start() method calls iniciar() method where its is defined the array of files to upload, and connect to ftp server. The for loop on every element of array and uploads a file on subirFichero() method.
Basicaly its this.
The HTML code is:
<applet
       codebase = "."
       code     = "revelado.Upload.class"
       archive = "revelado.jar"
       name     = "Revelado"
       width    = "750"
       height   = "415"
       hspace   = "0"
       vspace   = "0"
       align    = "middle"
     >
     <PARAM NAME="usern" VALUE="username">
     </applet>
package revelado;
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import javax.swing.*;
import java.io.*;
import javax.swing.border.*;
import java.net.*;
import ftp.*;
public class Upload
    extends Applet {
private boolean isStandalone = false;
JPanel jPanel1 = new JPanel();
JLabel jLabel1 = new JLabel();
JLabel jlmensaje = new JLabel();
JLabel jlarchivo = new JLabel();
TitledBorder titledBorder1;
TitledBorder titledBorder2;
//mis variables
String DIRECTORIOHOME = System.getProperty("user.home");
String[] fotos_sel = new String[1000]; //array of selected images
int[] indice_tamano = new int[1000]; //array of sizes
int[] indice_cantidad = new int[1000]; //array of quantitys
int num_fotos_sel = 0; //number of selected images
double importe = 0; //total prize
double[] precios_tam = {
      0.12, 0.39, 0.60, 1.50};
//prizes
String server = "localhost";
String username = "pepe";
String password = "pepe01";
String nombreusuario = null;
JProgressBar jProgreso = new JProgressBar();
//Obtener el valor de un par�metro
public String getParameter(String key, String def) {
    return isStandalone ? System.getProperty(key, def) :
        (getParameter(key) != null ? getParameter(key) : def);
//Construir el applet
public Upload() {
//Inicializar el applet
public void init() {
    try {
      jbInit();
    catch (Exception e) {
      e.printStackTrace();
//Inicializaci�n de componentes
private void jbInit() throws Exception {
    titledBorder1 = new TitledBorder("");
    titledBorder2 = new TitledBorder("");
    this.setLayout(null);
    jPanel1.setBackground(Color.lightGray);
    jPanel1.setBorder(BorderFactory.createEtchedBorder());
    jPanel1.setBounds(new Rectangle(113, 70, 541, 151));
    jPanel1.setLayout(null);
    jLabel1.setFont(new java.awt.Font("Dialog", 1, 16));
    jLabel1.setText("Subiendo archivos al servidor");
    jLabel1.setBounds(new Rectangle(150, 26, 242, 15));
    jlmensaje.setFont(new java.awt.Font("Dialog", 0, 10));
    jlmensaje.setForeground(Color.red);
    jlmensaje.setHorizontalAlignment(SwingConstants.CENTER);
    jlmensaje.setText(
        "Por favor, no cierre esta ventana hasta que termine de subir todas " +
        "las fotos");
    jlmensaje.setBounds(new Rectangle(59, 49, 422, 30));
    jlarchivo.setBackground(Color.white);
    jlarchivo.setBorder(titledBorder2);
    jlarchivo.setHorizontalAlignment(SwingConstants.CENTER);
    jlarchivo.setBounds(new Rectangle(16, 85, 508, 24));
    jProgreso.setForeground(new Color(49, 226, 197));
    jProgreso.setBounds(new Rectangle(130, 121, 281, 18));
    jPanel1.add(jlmensaje, null);
    jPanel1.add(jlarchivo, null);
    jPanel1.add(jProgreso, null);
    jPanel1.add(jLabel1, null);
    this.add(jPanel1, null);
    nombreusuario = getParameter("usern");
//Iniciar el applet
public void start() {
    jlarchivo.setText("Start() method...");
    iniciar();
public void iniciar() {
    //init images selected array
    fotos_sel[0] = "C:/fotos/05160009.JPG";
    fotos_sel[1] = "C:/fotos/05160010.JPG";
    fotos_sel[2] = "C:/fotos/05160011.JPG";
     // etc...
     num_fotos_sel=3; //number of selected images
    //conectar al ftp (instanciar clase FtpExample)
    FtpExample miftp = new FtpExample();
    miftp.connect();
    //make the directory
     subirpedido(miftp);
    jProgreso.setMinimum(0);
    jProgreso.setMaximum(num_fotos_sel);
    for (int i = 0; i < num_fotos_sel; i++) {
      jlarchivo.setText(fotos_sel);
jProgreso.setValue(i);
subirFichero(miftp, fotos_sel[i]);
try {
Thread.sleep(1000);
catch (InterruptedException ex) {
//salida(ex.toString());
jlarchivo.setText("Proceso finalizado correctamente");
jProgreso.setValue(num_fotos_sel);
miftp.close();
//Detener el applet
public void stop() {
//Destruir el applet
public void destroy() {
//Obtener informaci�n del applet
public String getAppletInfo() {
return "Subir ficheros al server";
//Obtener informaci�n del par�metro
public String[][] getParameterInfo() {
return null;
//sube al ftp (a la carpeta del usuario) el archivo
//pedido.txt que tiene las lineas del pedido
public void subirpedido(FtpExample miftp) {
jlarchivo.setText("Iniciando la conexi�n...");
//make folder of user
miftp.directorio("www/usuarios/" + nombreusuario);
//uploads a file
public void subirFichero(FtpExample miftp, String nombre) {
//remote name:
String nremoto = "";
int lr = nombre.lastIndexOf("\\");
if (lr<0){
lr = nombre.lastIndexOf("/");
nremoto = nombre.substring(lr + 1);
String archivoremoto = "www/usuarios/" + nombreusuario + "/" + nremoto;
//upload file
miftp.subir(nombre, archivoremoto);
class FtpExample
implements FtpObserver {
FtpBean ftp;
long num_of_bytes = 0;
public FtpExample() {
// Create a new FtpBean object.
ftp = new FtpBean();
// Connect to a ftp server.
public void connect() {
try {
ftp.ftpConnect("localhost", "pepe", "pepe01");
catch (Exception e) {
System.out.println(e);
// Close connection
public void close() {
try {
ftp.close();
catch (Exception e) {
System.out.println(e);
// Go to directory pub and list its content.
public void listDirectory() {
FtpListResult ftplrs = null;
try {
// Go to directory
ftp.setDirectory("/");
// Get its directory content.
ftplrs = ftp.getDirectoryContent();
catch (Exception e) {
System.out.println(e);
// Print out the type and file name of each row.
while (ftplrs.next()) {
int type = ftplrs.getType();
if (type == FtpListResult.DIRECTORY) {
System.out.print("DIR\t");
else if (type == FtpListResult.FILE) {
System.out.print("FILE\t");
else if (type == FtpListResult.LINK) {
System.out.print("LINK\t");
else if (type == FtpListResult.OTHERS) {
System.out.print("OTHER\t");
System.out.println(ftplrs.getName());
// Implemented for FtpObserver interface.
// To monitor download progress.
public void byteRead(int bytes) {
num_of_bytes += bytes;
System.out.println(num_of_bytes + " of bytes read already.");
// Needed to implements by FtpObserver interface.
public void byteWrite(int bytes) {
//crea un directorio
public void directorio(String nombre) {
try {
ftp.makeDirectory(nombre);
catch (Exception e) {
System.out.println(e);
public void subir(String local, String remoto) {
try {
ftp.putBinaryFile(local, remoto);
catch (Exception e) {
System.out.println(e);
// Main
public static void main(String[] args) {
FtpExample example = new FtpExample();
example.connect();
example.directorio("raul");
example.listDirectory();
example.subir("C:/fotos/05160009.JPG", "/raul/foto1.jpg");
//example.getFile();
example.close();

Who can help me with my ORDER?!

I had made an online order for my iphone 5s on 11/15 online. It showed that will be delivery by 11/19. I had recived the email with conformation # as quickly, but it always show "being processed, check it back tomorrow" in my order status. I have checked the local store, and they have the device in stock. So, I may want to cancel the order and get it in local store.
However, I called to the customer serving for all day. They always told me to transfer me to another department. The only time, they said it would not cancelled during the status was being processed and also do a transfer to another deparmenrt. but There is always being No Agents Avilable for each time!!
The chat live will not help you to do anything, except provide a phone number and let you call them.
Now, my status still not changing, and I have no idea to who i can communited with this issue.
Who can help me ?? How can I cancel it or to know anything about my order without only waste time for waiting and calling.

>Post deleted to remove personal info<
MODERATOR COMMENT: This is a public peer to peer (customer to customer) Community.
Please call 800-922-0204 concerning your order
Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone
Message was edited by: Verizon Moderator><

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I meet a big problems with my Z 10 , Who can help me??

Similar Messages

Maybe you are looking for