I messed up DNS, what are the steps clear out DNS and OD to start over?

After I changed the hostname using the Server wizard and the previous dns zones don't show up in server admin.app. I even tried to edit named.conf but it is somehow locked and won't let me over write it even with root.

They hid this one a little bit.
Download the Server Admin Utilities from apple.com/downloads
Open Server Admin.
Log in to the server in question.
Click on the arrow next to the server.
And there is the DNS Server control. You can update your zones there.
Did this from memory, since I am not in front of my server right now. I just figured it out myself last night. I had two "extra" zones from my earlier attempts to configure server that were wreaking havoc. 10.7 Server is not exacltly as advertised in terms of being the "server for everyone".

Similar Messages

What are the steps required in NWA and ID in order to enhance security of adapters in PI 7.31 Java Stack ?

HI All,
I am looking for steps need to follow for seurity and certificate management in PI 7.31 Java Stack.
Could someone help me with the security and certificate management steps needs to follow for SOAP/RFC/MAIL adapter ?
I looked at sap help link Network and Transport Layer Security - SAP NetWeaver Process Integration Security Guide - SAP Library
Regards,
Karan

Hi Karan,
For SOAP adapter you can use digital signing and encryption. Please refer the below blog
Configuring WSSE (digital signing and encryption) using SAP PI 7.11 AAE SOAP Adapter
regards,
Harish

HT201209 I have a credit in itunes account, but when I click on "redeem" it asks me for a gift cared or download code. what are the steps to access the credit I have so I can purchase more music?

I have a credit in my itunes account, but when I click on "redeem" it asks me to enter a gift card or download code. what are the steps to go in and be able to redeem the credit I have? If I go to an album that I want to use my credit on, the only choice I am seeing is to use the credit card on file. Help!

It says   at the top      under Redeem after I touched that:
          $14.73
Account: [email protected]   (my account name)
Enter your Gift Card or Download Coad

What are the Steps to assign Public IP ?

Hi,
I want to assign Public IP address to my OEL. What are the steps for it.
Regards,
Ajay

Ajay Sharma wrote:
I want to assign Public IP address to my OEL. What are the steps for it.Do you have an IP address to assign? The public IPv4 address range is exhausted. So no ISP is simply going to give customers static public IPs to use.
An ISP typically has a DHCP server and a pool of public IPs that are handed out to clients when connecting. With local hosting contracts/accounts, one may get a static IP allocated to you - but expect to pay extra for that.
The usual configuration is to configure your router for making the ISP connection and getting an IP on the Internet. You then configure your LAN devices to use the router as default routing gateway.
If you want to host a web server for example on a LAN device, you should consider using a NAT firewall on the router (supported by most in my experience). For example, your router has LAN IP 192.168.0.1. Your LAN web server has IP 192.168.0.20. The ISP address allocated to your router is 42.42.7.123.
On the router you configure port 80 to be NAT'ed to 192.168.0.20 using port 80. This means an Internet connection to 42.42.7.123 will be passed by the router to your web server.
Of course, as the public IP is leased by your router, it can expire, and a new public IP address given when the lease is refreshed. So you cannot exactly give out a DHCP IP to Internet users to connect to your web server. The solution is dynamic DNS. Again, many routers support this - automatically telling the dynamic DNS service what the current public IP address is for your web server's Internet hostname. This hostname you need to register with the dynamic DNS folk (and pay for) - and allows you to have an Internet presence via a dynamic public IP.
Even if you are lucky enough to have your own dedicated public Internet IP - I suggest NOT using without very CAREFUL consideration. This IP will be attacked by hackers. Not might be. Will be. It will be probed for weaknesses. Weaknesses will be exploited. Fact.
So if you want to assign a public Internet IP to your Linux server, you MUST harden the server. Latest patches. Service management. Solid iptables configuration. Consider running SELinux in fully active mode. Constant monitoring of server logs.
Most of which a router will protect you against with a much easier and simplistic web admin interface - and by protecting your servers via NAT.

What are the steps if; the disk cannot be partitioned because some files cannot be moved

I'm to install windows XP software, and I can partition the disk. If state, "The disk cannot be partitioned because some files canot be moved." What are the steps to complete partition to install windows XP?

Ok what happens with Bootcamp is it needs to carve out a contiguous free space at the bottom of your hard drive.
If it can't do that then it can't make the partition.
What has happened is there are some files down in closer in the bottom part of the drive, this occurs if you've had a hard drive nearly full, performed a software update, installed programs and then removed some files leaving parts and large empty spaces.
So what to do to fix this?
Well your going to have to learn how to clone your OS X boot partition, with all your programs and files to a external drive, which you can then hold the option key and boot from it.
Then you run Disk Utility from the clone, erase the OS X partition on the internal drive and clone everything right back.
This will place everything in order, move everything up and nice and compact at the top of the drive, which will allow you to make a BootCamp partition as big as you have room for.
It will also make your comptuer perform a bit faster too.
Cloning back and forth is rather safe, because you always have a hold option key bootable clone, either on the internal drive or the external drive, your computer will work from either.
What you don't want to use is Defrag software, that moves things around while the computer is running and messes things up quite a bit and really doesn't optimize as well or as safely as a clone.
In fact I just assisted a person who did just that and royally messed up their machine, requiring a complete rebuild of everything.
So read through this thread of mine and grasp things and you'll be cloning your boot drive in no time.
https://discussions.apple.com/message/16276201#16276201
Remember that cloning can't clone Filevaulted drives or Bootcamp partitions, also it only (at this time) clones the OS X partition, which for Snow Leopard is the whole drive usually (minus Bootcamp partition.)
However if your on Lion, Carbon Copy Cloner doesn't quite yet clone the hidden Lion Recovery Partition, so when you clone you won't have it on the external drive but the computer will boot off the external drive just fine without it.
So when you go to erase the Lion internal drive, you need to erase only the OS X Lion Partition not the entire drive before reverse cloning.
You should make a Lion Recovery USB if you have Lion, as only through Lion Recvoery can you reinstall Lion now. Instrucitons are in my thread.
The way you can tell if your selecting a partition or a entire drive in Disk Utility is how far left it is.
The far left are devices and the slightly indented items are partitions or media using that device.
Good Luck

Currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to update my IMAC?

I'm currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to get my IMAC totally up-to-date?

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(116042)

How do I unlock an iphone 5 with Sprint. The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

There is no such thing as an unlock code. Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
iPhone: About unlocking

How do i get my apple ID from my old iphone 5 to my new iphone 6 ? what are the steps? because last time i tried getting my apple ID from my old to new phone it all went wrong and i could not sign in or use imessage? thanks

How do i get my apple ID to work from my old iphone 5 to my new iphone 6? what are the steps? as last time i tried this everything went wrong my imessage would not work and it would not let me sign in?

Try TransPhone, it's working fine, but a bit expensive...
After installing this, you'll Be able to send/recieve music, contacts, text messages, photos and Videos over bluetooth. Works fine with all mobile phones and computers...
I may receive some form of compensation, financial or otherwise, from my recommendation or link
<Edited by Host>

What are the steps would liket take using AR,AP,GL Datasource in R/3

Hi,
When i would like to use SAP content data source Like ,AR,AP,GL
data source what are all the master data need to activate for this.
Ex: for AR we need to activate the Customer master data
what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.

What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.
Find out what Cubes, ODS's will be used - > HELP.SAP using the datasource.
Activate transaction datasources.
See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
Install content on BI side.
It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.
Infosource Overview

What are the steps need to be taken care for MM data sources while extrac

what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
Racha

Hi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the steps to make it seamless for a customer to use the install program and then use the installed program?

I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67

This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What are the steps needs to be perform to define a data model

What are the steps needs to be perform to define a data model
a. Information Gathering
b. Hardware & Software
c. Structure the Information MDM
d. Transfer into a Physical Model BW data model
e. Explore use of existing model Business Content

Hi Siva,
 Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.

Project Preparation
Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
Blue Print
Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
 By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
Realization Phase
Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
Testing
 Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
Go live
Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after it will be transitoned to support team.
Hope It helps you.
Assign Points if it usefull
Regards
Sujan

What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
Ayesha

Thanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha

What are the steps to change the name on the "House" in the side bar on OSX Mavericks?

What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?

You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root

I messed up DNS, what are the steps clear out DNS and OD to start over?

Similar Messages

Maybe you are looking for