I messed up install of Zen Nano Plus 1

Windows XP Home SP2
Windows Media Player 0 (will use with Zen Nano Plus)
Dell 8250
?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" />
During the CD install, I had some questions and interruptions that required me to cancel, exit and say ?yes? to I did not want to install at this time, but it installed some files. I did not connect the player to my computer because of the manual?s warning to not connect player to computer before setting up the software.
A search for Creative and Creative Zen brought up the following files on my computer:
C:\Program Files\Creative\Product Registration\English
C?\Program Files\Creative\Shared Files\CTregSvr and PdtIdMgr.pid
C:\Program Files\RealPlayer\Devices had 7 Creative and Creative Zen files
I have an Iomega Zip USB mass storage device on my system which is always powered up. It is used as I go along as a 2nd backup.
Some other threads here recommend not using the install CD and not installing the software, but suggest connecting player and letting Windows XP recognize and install drivers. This is what I did with my Zip dri've. I dislike putting software I don?t need on my computer. I will be using the Nano Plus just for music, and maybe on occasion the AM/FM.
So?..here are my questions:
. Install with CD or connect to computer and let Windows do its thing?
2. Will the Zip dri've cause a problem and should I power it down and disconnect from the computer when installing and using the Nano Plus?
3. Are there more files lurking about in the Registry and where? (I am O.K. working in the Registry) ? I would like to make everything clean and start fresh with a clean install, unless this is not recommended.
4. If I do need to use install CD is a full or custom recommended?
I will appreciate any assistance and information offered.
My thanks.
Miki

I thought I would let y'all know my Nano Plus is installed and my USB Iomega Zip still permanently resides undisturbed in my F:\ dri've and when I connect the Nano Plus, it is recognized by G:\ as it should be.
I called Creative support and so I dd not have to use the install CD, the tech E-mailed me the drivers. When I began the install, I was asked to uninstall any mass storage devices before I installed, which I did......actually I just unplugged the Zip dri've so Windows would not know it existed. The tech said it was better to install their drivers than not; otherwise with WMP I would only be able to drag and drop.
So.......that's my story
Miki

Similar Messages

  • I can't install the Zen nano Plus software on my pc. He

    Hi,I've read some people have the same problem I do, but no solutuion. When I try to install the zen nano plus cd that came in the package, it comes up with a window saying : "the windows operating system running on this computer is not supported by this product". The nano plus is supposed to work with windows ME which I have?and I think I meet all the other requirements. Could they have mislabeled a cd?I tried installing it with the antivirus turned off with ca antivirus. Thanks for any help,Joe?

    I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
    Message Edited by joenanoplus on 2-26-200608:32 AM

  • Zen Nano Plus: How to resolve issues with installing firmware 1.14

    So .... I managed to kill my Zen Nano Plus when installing firmware version .4.03, but fortunately I've managed to bring it back to life again. :-)
    Here's what I did wrong, and how you can avoid the mistakes that I made ...
    I attempted to install the newly released "Creative ZEN Nano Plus Firmware .4.03" from my Windows 2000 system. However, I had not previously installed the "Creative Mass Storage Driver .07.00.250". In fact there seemed to be no reason to install these mass storage drivers as the Nano Plus player was always recognized by my system. However, while installing the firmware upgrade, it seems that the player is set to recovery mode and therefore the mass storage driver needs to be installed prior to upgrading the firmware.
    I realized this partway through the firmware upgrade when prompted for the "StMp3Rec.sys" driver. I then successfully installed the mass storage driver then attempted to continue with the firmware upgrade. Unfortunately, the firmware software "froze" and the process had to be killed. My Nano Plus player now wouldn't turn on and my system would not recognize it. I then read how to set the player in recovery mode, and was able to see the player listed as "STMP3500" when examining my attached USB hardware (using the "Unplug or Eject Hardware" dialog).
    To install the driver, I then looked at all hardware in my "Device Manager" (right click on "My Computer", select "Properties", choose the "Hardware" tab, click on the "Device Manager" button) then selected the "STMP3500" device. Right clicking and selecting "Properties" (or double clicking) brings up the properties dialog and from there I chose the "Reinstall Driver" button. I specified the driver location: "C:\Program Files\Creative\Creative Mass Storage Drivers\StMp3Rec.sys" and the driver then successfully installed. Finally, I successfully installed the firmware upgrade and all is now working well.
    Here's the bottom line:
    Be sure to install the "Creative Mass Storage Driver .07.00.250" prior to upgrading to the "Creative ZEN Nano Plus Firmware .4.03".
    Maybe it is because I beta tested six or seven different Rio MP3 player models (until D&M Holdings discontinued the Rio brand), or because I have worked as a software developer for eight years - but I tend not to install any software that does not appear to be required. The Creative firmware upgrade software could be greatly improved by including a simple check to see if the Creative mass storage drivers are installed before accessing the player.

    This has been answered many times here. Delete a few files on the player. Create a few folders on the player. Move the songs on the player into the folders. Now add more songs to the player into the folders. There is a limit on how many items the player will allow in the root.

  • Can't power on Zen Nano Plus

    I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

    I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
    Message Edited by joenanoplus on 2-26-200608:32 AM

  • Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

    HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
    8 May 2006, Creative Zen Nano Plus Pack
    8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
    8 May 2006, Zen Nano Plus Media Explorer 2.00.0
    8 May 2006, Creative Audio CD Ripper .60.0
    7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
    7 May 2006, Creative MediaSource Player/Organizer 3.30.2
    7 May 2006, Common Audio Driver Interface .03.29
    3 May 2006, MediaSource AudioSync Plugin .0.03
    3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
    3 May 2006, Creative Music Store Plugin .00.09
    3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
    3 May 2006, Creative MediaSource Player Skin Pack .0.06
    3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
    3 May 2006, MediaSource CD-ROM Burner Component 3.0.
    3 May 2006, MediaSource Detector 3.00.7
    3 May 2006, Common Audio Driver Interface .03.
    3 May 2006, Creative MediaSource 3.20.57
    3 May 2006, Audio Device Selection .0.05
    3 May 2006, Creative System Information .0.3
    3 May 2006, Zen Nano Plus Media Explorer .0.03
    3 May 2006, Creative Audio CD Ripper .60.06
    Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

    Welcome to the Apple community.
    If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

  • Zen Nano Plus WON'T START / RECOVERY / RES

    Hello ZNP friends and fellow victims of frustration,
    I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
    I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
    What I do remember is this:
    ) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
    2) I did double click it to call it up.
    3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
    4) I did leave the battery out of the nano plus during this operation.
    5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
    6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
    What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
    Creative should really have a clear set of instructions by now for fixing this problem.
    Good luck!
    Buck

    Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

  • Zen Nano Plus: I can't get my CDs to play in original order...He

    Hello. I'm new here.
    I got a Zen Nano Plus 52 mb a few months ago. Installed the software on my computer. I'm not very computer literate.
    Here's what's frustrating me: I can't seem to listen to my CDs in their original order.
    ) I put a CD in my computer
    2) Whether I view the track list in Windows Media Player or in the Creative Media Menu the track list appears in its original order as seen on the CD.
    3) I "rip" the CD to my Nano player.
    4) When I disconnect the player and go to play the album the tracks are all mixed up and not in the original order anymore.
    I've tried some different things but nothing seems to correct the problem. I'm hoping someone can direct me what to do. I'm very confused, as I don't understand much of the computer terminology I read.

    As in other response, the Nano Plus does not read ID tag info for sorting (it does read part of the tag--song name---only for display while that song is playing). Tag info typically includes the track number. Windows Media Player plays tracks in order of track number contained in the ID3 tags. The Nano Plus only sorts by filename. You can rip your tracks in a format that is prefixed by the track number (for filename). This can be done in Windows Media Player and other programs. Somehow you ripped tracks without the track number first (which would solve your problem). You tracks should look like "0-Come Together-Bealtes.wma" or something like this. This is the FILENAME, as you would see in Windows Explorer. The track info is not visible in Windows Explorer views. You can see it from Windows Media Player or Creative Media Source Organizer, though. Other players like Zen Micro and Touch sort tracks and build the library database on ID3 Tag info, not filenames.

  • Problem with zen-nano-plus!! please help

    i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
    i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
    when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

    Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
    Good luck!

  • Zen Nano Plus Lin In Iss

    I have a Zen Nano Plus. I purchased it for recording church messages. I run the cord from the line in to the church sound board. The recording is good, however, the nano sometimes shuts down during the middle of the sermon. What would cause this problem
    ? Is there a special setting or fix?Please help

    Hi,
    Sorry to hear you are having problems. There is no setting for this as this isn't normal behaviour. I'd suggest loading the latest firmware onto the unit and also checking the box "Format Data Area" when given the option to during the firmwares install.
    The firmware is available from here .
    http://uk.europe.creative.com/suppor...ame=Windows+XP
    Hope this hel
    ps.
    John

  • Creative zen nano plus

    I´ve bought a creative zen nano plus and couldn´t make it work on my Mac. Does anyone knows if there is any restrictions for creative mp3 players to install on Macs? There´s anything I can do?
    Thanks

    Welcome To  Discussions marianamansur!
    As per this page ZEN Nano Plus - 1GB MP3 flash player stores 500 songs and comes available in 10 colors, these are the software requirements.
    "Microsoft® Windows® 98SE®/2000/Me/XP (Service Pack 1 or higher)"
    ali b

  • Zen nano plus suddenly isn't recognized by WMP 11

    Hi there. I have Windows Vista Home Premium 32 bit on my PC. And I've had no issues with Windows Media Player recognizing my Zen Nano Plus - until this week. It just isn't. All of a sudden it's only showing as a removeable disk. I can access music files and what not - but I'd really like to be able to sync again. Has anyone experienced this problem?
    I did download the new firmware and install it - but still having the issue. I'd appreciate your help and feedback thanks!

    Re: zen nano plus suddenly isn't recognized by WMP n I do have that and while I can still add music and what not - I honestly just prefer going in one way through WMP . However, I did a System Restore Point today to a point to which I had thought I could still sync - and now when I open Windows Media Player it does recognize my device.
    Interesting point - my device now has the udpated firmware; because I had updated last week. And AFTER I did the System Restore, and then plugged in my device, it reinstalled the driver and Windows Media Player did recognize it. So I wonder if this has to do with the new firmware installation; although WMP did stop recognizing my device prior to my updating the firmware. (That is what led me to look for the update in the first place)
    However, this seems to have fixed my complaint. For the moment. Thank you for your response and suggestion!

  • Volume level ZEN NANO PLUS, can it be chang

    I have a new ZEN NANO PLUS that I have bought in Spain.
    I?ve had this model before and I know that, because of the EU ruling ( **bleep** those bureaucrats! ), the volume level is not as loud as the model you can buy in the US.
    A few people have suggested flashing the firmware and installing the US firmware, has anyone tried this, and did they have any success?
    I downloaded the US firmware and tried to install it on my player but no luck, and the player died aswell, but I?m not sure if I did the correct thing...
    If anyone knows anything about this any info would be greatly received.
    Thanks in advance
    Neil

    You shouldn't have problem using both player together in MediaSource even in transferring audio files(non-protected content). Are you referring to being able to playback PlayForSure subscription content? I doubt it is possible(personal opinion) for the player since I believe it's more to do with the hardware rather than software.
    Jason

  • Zen Nano Plus 1GB i/o device er

    Hello
    i have been using Zen nano plus gb for some time now. Today i plugged it in my pc and when i tried to acces it i got the following error message. "L:\ is not accessible. The request could not be permitted beacuse of an i/O device error.
    so i see my zen nano in my computer, but my zen nano exlorer dont regonize it and i cant acces my player and it gives me that error. How can i fix this?

    Hello!
    I had the same problem/error message with my son's 52 Mb Plus. In my case solution was firmware update. I downloaded from support latest firmware (ZENNanoPlus_PCFW_LF__3_03.exe), installed it and reformatted the player. If I had understood right, before firmware installation, also the Player Recovery Device was installed and run.
    Last April (04-20-2006) Buck posted in this forum a message with more precise instructions. You can also find instructions for updating firmware from Support KnowledgeBase (eg. Solution ID # 265 Updating firmware for MuVo or Zen Nano Plus).
    Hope this hel
    ps.

  • My Creative Zen Nano Plus bro

    my Creative Zen Nano Plus mp3 player stopped working after i dropped the mechanical part. When I checked it, I didn't see any chip marks or anything, but still it won't work. Can anyone help me? I'll post up pictures if u need me too, and I'll show how it broke.

    jumpshot22 wrote:
    "I found out the hard way that for it to be able to charge by USB on a computer, the software has to be installed which I think is pretty retarded. You should definitely pick up a charger cause it's a lot faster to charge and more convenient. " -- some guy who reviewed the mp3 player
    i cant find where this other guy who said like the same thing
    They must have been talking about a different player such as the Zen Micro which does recharge via the USB port.
    PB

  • Mass Storage Drivers to save Zen Nano Plus...[HALLELUJAH SOLVEDDDD!

    Okay, my Zen Nano Plus was working fine until about two days ago, when it just started shutting off. The battery was full, and I switched batteries three times, but it still wouldn't stay on. I looked through the forums, and there was advice to update the firmware. [I had ..0] I downloaded it [.3.03], and ran it, but then it said that it couldn't find the hardware for the software [or the software for teh hardware?] and I didn't know what to do, but the computer [or whatever] decided to disconnect the Nano from the comp, so there was no firmware on the player at all. And now it won't turn on.
    So I looked on the forums for THAT, and it was advised to download the Mass Storage Drivers, so I did. Only I don't know if I'm supposed to double click the icon and execute the program before I do the whole "push play before connecting the player to yor computer and continue holding play for ten seconds" thing, but I did, and I don't know if I was supposed to do, and somebody please help meh because I love my Zen and if he dies I am going to die as well. And be really bored during my classes.
    Also, I am running on Windows ME.Message Edited by rubyandrest on 0-29-200708:4 PM

    Dude...i have been a loyal customer of creative for years....i just updated my firmware on my nano plus and my zen shut down....no reset...nothing. i sent an email and i recieved a generic email about paying for contact help. they have lost a loyal customer and i am telling all of my friends to never buy a creative product. mine was fine and then i saw a firmware upgrade and thought, "wow, this would be great". then after installing it is useless. no help from creative at all. i have always had soundblaster cards and creative speaker systems so i figured id get their mp3 player...now i will never patronize their company again. go get an ipod. i am on payday! they will probably delete this post and deny me access to the site after this, but i am a marketing management major and this is a big No No for companies that wish to stay around. Creative will be gone in a few years if this is the service they offer.

Maybe you are looking for