I messed up my IP settings.

I was messing around with my Macbook yesterday which is never a good thing with me and somehow managed to destroy my internet. In the network tab it says Airport is connect and says self assigned IP and may not be able to connect to the internet. I tried resetting my router and nothing seems to happen. I tried to delete the network altogether so I could start a fresh but I don't know exactly how to do that. Under the TCP/IP tab it gives addresses which don't match up to my iMac. The IPv4 address has 3 more digits and it doesn't give a router address. I tried the manual option and entered everything in. but that doesn't seem to work either.
Any ideas on how I may be able to sort this problem out?
Cheers

Yeah, I took these off it. Dunno what you wanted to look at so posted a few. What is br0? =/
http://www.turboimagehost.com/p/544444/Picture_1.png.html
http://www.turboimagehost.com/p/544445/Picture_2.png.html
http://www.turboimagehost.com/p/544446/Picture_3.png.html
http://www.turboimagehost.com/p/544447/Picture_4.png.html
http://www.turboimagehost.com/p/544448/Picture_5.png.html
http://www.turboimagehost.com/p/544449/Picture_6.png.html
http://www.turboimagehost.com/p/544450/Picture_7.png.html

Similar Messages

I have some old cd's I have burned on itunes. How can I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe . Please be gentle.

I have some old cd's I have burned onto itunes. Howcan I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe. Please be gentle

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

Gnome Crashes on Login after messing with dual monitor settings

Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
Here's my xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 285.05.09 ([email protected]) Fri Sep 23 19:18:19 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
I installed awesome around the same time as configuring the dual monitor setup.
Thanks.

Update.
The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
Is there a way to just reset the Gnome settings?

I have PS CC. If I download PS CS3, to be able to use an older filter, will it mess up my CC settings and performance?

I have PS CC. If I download PS CS3, to be able to use an older filter, will it mess up my CC settings and performance?

Hi Digitalartist,
It will not affect the performance but it might change the default to CS3 Photoshop.
You might check in bridge for the file associations whether the extensions like Jpegs, PSD etc have Photoshop CC selected.
Also check the default program for the images if you are directly opening images with Photoshop.
Thanks

Apple messed up the "clicker" settings!!!

On my old iPod mini under "settings" there was an option called "clicker", then the options were "on, off, speaker, headphones, all". I had it set to "all" so I could hear the click wheel sound while I used the iPod in my car as well as when I take it to the gym with my headphones.
Well, now with this new iPod, that isnt possible because the only options they have for the "clicker" setting is "on, off". So, now the click noise only comes from the iPod unit itself & NOT ANY OUTSIDE SOURCES. That means you cant hear the clicks using your headphones, in your car, etc.
Does anyone else see the big problem with this?? How could they leave that off???

Hey, Apple did not mess up the clicker settings it made it smarter, the reason there only off and on, because whens it off, its off but when its on its on the device and in the headphones you just wont hear it if you playin music thats how its smart.. here test it out.
Play a song anysong leave one heaphone in ur ears and one out, make sure your volume is all the way up.now try moving the click wheel you should only hear the clickin sound from the ipod itself and not in the headphones.
Now Pause the Song and try moving the click wheel again you should hear it from both the headphones and the device 2 points for apple and a plus + for me?? ^

Windows update KB2847077 messes up Media Player settings

Windows update KB2847077
causes Media Player 12.07601.17514 to lose track of all settings and libraries
Double clicking on a video media - opens a first time window that asks to use recommended or custom settings.
(this is catastrophic for me as I use Media Player's DLNA connectivity)
This has happened twice to me - first from a standard Windows Update (yesterday 12/11/2013) - I had to do a system restore to before the update, then figured out that it was KB2847077 - so updated everything else except for KB2847077 - my PC and media player
were just fine after the restart.
Last night for some reason that update was installed again, from one of my vulnerability scans (despite me specifically hiding it in Windows Update) - so this morning my Media Player was messed up again - did another system restore before that module update,
and everything is back to normal again.
Thanks
Vincent

Hi,
Do you have the issue described in the KB?
You install Internet Explorer 10 on a Windows 7 Service Pack 1 (SP1)-based computer.
You configure the AutoPlay feature so that Windows automatically uses Windows Media Player to play audio CDs.
You insert an audio CD into the CD-ROM device, and then Windows Media Player starts.
If not, we can choose to hide the update.
Control Panel>System and Security>Windows Update>Check for update>right the update and choose Hide Update.
If you want to see the update later, on the main Windows Update page, choose Restore Hidden update.
Otherwise we can refer to the following article to fix the issue caused by windows update.
How To Fix Problems Caused by Windows Updates
http://pcsupport.about.com/od/system-security/a/fix-problems-caused-by-windows-updates.htm
Please note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps,
Ada Liu
TechNet Community Support

Please please help! I have messed up the DNS Settings on 10.8 server

Just started a new job and am in charge of managing the Mac Server. I have lots of Mac experience, but very little Mac OS X Server experience.
I used my MBP to access the server (which is a headless Mac Mini) and after I did so the settings were pretty messed up. In particular the Computer Name, Host Name, and DNS name were wrong or missing. I was able pretty easily to get the first two fixed, but not DNS.
I can reach the server via the IP, but NOT the domain name. (We were able to do this before I messed things up).
When I run
cat /etc/resolv.conf | grep nameserver
I get 4.2.2.2
which is the forwarding server
I have tried turning DHCP on and off, never works.
When I run
cat /etc/resolv.conf | grep nameserver
I get
nameserver[0] : 4.2.2.2
nameserver[0] : 150.2.0.30
nameserver[0] : 4.2.2.2
The 150.2.0.30 is what I have for the DNS entery in the Network Control Panel
When I run changeip -checkhostname under sudo I get
macserver:~ bryanschmiedeler$ sudo
Password:
Primary address = 192.168.x.x
Current HostName = server.example.com
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
Any help would be GREATLY Appreciated!
Bryan

Here are instructions for setting up DNS on OS X Server; select the show-all-records option on Server.app in 10.7 and 10.8, and those instructions should get you to a working configuration.
Your DNS server on OS X Server should refer to itself, via 127.0.0.1 address; the "localhost" address; IP networking's version of "self" or "me". This 127.0.0.1 reference is a special case, and only applicable to the DNS server's references to itself. All other hosts on your network should refer to your OS X Server DNS server by its assigned private static IP address on your LAN; whatever 192.168.0.0/16 address you're using for your DNS server. If you should have more than one DNS server on the LAN (commonly used for better reliability), each DNS server will refer to 127.0.0.1 and to the private static IP address of the other DNS server.
Do not refer to off-LAN DNS servers. Do not refer to ISP DNS servers, or the old Verizon DNS servers (in use here) nor to the Google DNS servers. To get local translations of private-block IP addresses such as your use of a subnet within 192.168.0.0/16, the server and the local clients must refer to the local DNS server. (Not to off-LAN DNS servers.) That means either manually-configured DNS server settings for static-addressed servers, and configuring the DHCP server to pass out only — only — the address of the local DNS server(s) to DHCP clients, and to not pass out any off-LAN server address(es).
Half the planet is probably using a subnet in the 192.168.0.0/16 private block, so obfuscating that range just means you might be running in one of the two the more problematic subnets, 192.168.0.0/24, or 192.168.1.0/24, but we can't tell. Those will cause issues with potential future use of VPNs with this network. Best to avoid those two subnet blocks.

Firefox 4 has messed up my iGoogle Settings and won't allow it to function. Yet IE 8.6 handles it fine. What is the problem?

Firefox 4 is preventing me from changing/moving/ editing any gadgets I have on my iGoogle page. Several of the gadgets don't show any content or even a title. I checked my iGoogle settings in I.E. and everything works in it. What changed in Firefox 4 that prevents iGoogle from working correctly? My husband who hasnot upgraded to Firefox 4 is not having the same problems with his iGoogle settings which is revealing. I know I am not the only person experiencing this and yet, this idiotic way you are making me jump through hoops to get information claimed this question had not been asked befoe. Come on Mozilla, let's get this fixed. It's been over a week now. I hate using I.E. and much prefer Firefox. Don't drive me and countless others away.

I run Avast! anti-virus. My igoogle homepage listed my gadgets along the left side, but the rest of the screen was just blank white.
I turned off the 'web rep' application from Avast! and the my gadgets were right back where they were supposed to be.
I hope Firefox can clear this up, as I like the 'web rep' option....

IOS4 Has messed up my equalizer settings

Ever since updating to iOS4 on my 3GS, my equalizer settings are all very, VERY quiet. Even the setting Loudness is about half as quiet as when I have the Equalizer turned off completely. All other settings are acting similarly.
Anyone else having the same issues?

I think I had the same issue ...I noticed that on my iPhone 4 all my music seemed low..using the EQ...Not using the EQ....I even compared it to my 3g and I could notice a considerable difference in loudness(3G with iOS4 was louder than my iPhone 4). Then I noticed that if I was listening to a song and I hit the back button, the song would replay much louder(comparable to the 3g)..So I did a hard reset of my iPhone 4 and the issue seemed to correct itself..It was weird to say the least...

Help! The toddler has messed up my InDesign settings!

Running InDesign CS on a newer iMac, and our little one somehow got in front of the keyboard and went wild while wife had the app. running. After cleaning up the desktop mess, I've discovered that InDesign is really messed up. Tool Bar is gone, and none of the tool palettes found under the Window menu are visible. I tried a software reinstallation but to no avail. Could it be as simple as throwing out the InDesign preferences, then re-starting? To compound the mess, I am having no luck in locating where these prefs are hiding in my computer's system folder. Any/all suggestions are much appreciated!

I'm glad you got it sorted but I'd like to bring something to you attention.
CS is totally unsupported on Leopard and Intel machines add another level of complexity. CS is the earliest version of Creative Suite eligible for upgrade pricing and if the current policy holds you will be ineligible for upgrade pricing when CS5 ships. That's going to be one very expensive decision to make.
You should give careful thought to upgrading to CS4 now while you can. For $799 you get all new versions of ID, PS, Illy, DW, FW, FL and Acrobat Pro. http://bit.ly/aoqQSB. I know that's not cheap but if you wait you'll be looking at closer to $1,800.
I'm bringing this up because invariably when new versions come out we see a lot of very unhappy people who were unaware that Adobe changed to tiered upgrade pricing and are shocked to learn that they can't upgrade anymore.
Bob

PAL tutorial messing up my sequence settings.

Hello...
We're running FCP 5.1.4 on Mac G5's in a school computer lab. We're using some PAL tutorial footage that is fromone of the Apple Pro Training books. The footage is for the multi-camera function in FCP. When we close out of the tutorial and then open up another project on the same computer - the sequence settings automatically default to PAL. Why does this happen when we have everything else set up for NTSC? It doesn't make sense to me when we also set our User Pref's to NOT open the last project.
Any help would be greatly appreciated.
Thanks
Murf

Default sequence settings are not part of a project file. They are saved in the prefs... so change them back to NTSC in the audio/video settings, and you won't have a problem.
Jerry

Utorrent messed with my browser settings among other things?

So I had downloaded utorrent yesterday but ended up not needing it like I did and I realized that it had changed my browser settings to go straight to Yahoo Search. I fixed the extensions and reset the browser home page and everything and continued on my day not thinking much about it and shut down my computer before i went to bed.
This morning though, I tried to turn on my computer and rather than an apple symbol coming up while it turned on, it showed a circle with a slash going through it. I did a reboot and managed to get my computer to turn on normally. I went to my browser and once again, Yahoo was coming up. I did a bit of searching and found out that with the utorrent download, it sets up the crappy yahoo search so I tried to uninstall utorrent (it doesnt give any uninstall option so i dragged everything i could find having to do with utorrent and put it in the trashcan and emptied the trash) but STILL, my browser is going straight to Yahoo. I can't figure out how to change it or find whatever it is that is on my computer that is making this happen and I can't find a proper answer anywhere else on the internet. I'm not sure if the computer startup problem is just a coincidence or if it is due to whatever was set up with utorrent. What can I do to fix the browser problem? could the start up issue be related? I'm afraid I might have a virus or something. Is there a way I can reset things to how they were 2 days ago when I didn't have this issue?

These mofos - I trusted uTorrent because it's always been good so just clicked yes yes yes without reading. To change these settings back on chrome:
1. Open settings (either top right "hamburger" or from the menu bar Chrome -> Preferences
2. In the section "On startup" it's set it to "Open a page or specific set of pages". Click set pages and delete that yahoo crap and then choose your preferred option (I like "Continue where you left off")
3. It's changed your default search engine to Yahoo. Still in preferences, in the Search section click "Manage Search Engines". Click "Make default" next to Google then delete all the search engines you never want to use.
I think that puts everything back how it was. Will repost if I find anything else.

Hey guys! I went to Mexico over spring break and messed up my email settings. Now I can't send any emails what so ever, but I can get them. It says that an outgoing mail server smpt.live has failed. So...I need help! I haven't sent an email since march!

#emailhelp

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Why does my ipod backup mess up my iphone settings?

So I recently got an iphone 5 and restored it from my ipod toouch 4 ios 6.1.6 backup and now some of the features of the iphone are replaced by the ipod's. If you have a newer idevice, you know that when you hold down the volume down button for about 2 seconds it auto mutes it but since ipod 4's dont have that feature, the backup that of the ipod that I put in my iphone also makes it lose that feature. Another problem is the ipod 4 dies at around 16% to 15% and now the battery setting on my iphone thinks that when it is 15% it is time to turn off. Is there a way to fix this without losing all my apps?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Did I mess up my security settings?

Good morning:
Last night, I got awake at 2 AM and started playing with the new Tour (too much caffeine last night). Anyway, somewhere in the middle of messing with Options>Security Setting>Application Permissions, I wound up where the Tour said I had to reboot to save the changes, and I couldn't get out of it - so I let it reboot.
I'm guessing I edited the Default Permissions - but I don't know which one(s). Is there a way to return the default permissions to my original Sprint factory state? The Tour is just my personal phone using BIS, but I don't want to allow anything more than necessary.
Thanks folks!
Solved!
Go to Solution.

Hi!
After a wipe, these two steps are critical:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
2) Service Books (to get your email icons back):
KB02830 Send the service books for the BlackBerry Internet Service
If things still do not return to normal (for instance, the permissions remain messed up), you can try restoring your BB to true factory fresh condition (for the OS level that it has installed):
http://supportforums.blackberry.com/rim/board/message?message.uid=269661#U269661
That information is written regarding removing an IT Policy from the BB, but will effect restoring to factory fresh -- and, as such, might apply in your situation. Be sure to do the two steps above after this as well.
Good luck and let us know!
Message Edited by sdgardne on 09-15-2009 01:34 PM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I messed up my IP settings.

Similar Messages

Maybe you are looking for