I miss my Greasemonkey, I understand it's a problem with FF4 and 64 bit.

After upgrading to 4 I saw that my Grease monkey was missing. I tried to download it but it evidentaly is not compatible with my 64 bit system.

same problem sooo howare we supposed to turn greasemonkey on and off???

Similar Messages

LSMW - Problem with copied and edited Project - missing new field

I have copied an LSMW project to a new Project to load a Journal Entry to FI - Transaction Code FB01. I added a new field VALUT (value date) to both the Maintain Source Fields and Maintain Field Mapping Steps. The data with the new field shows up in Display Read Data, but it does not show up in Display Converted Data. This new field is the last field in the csv file, i added it to the end of the Source fields.
I think perhaps i need to create a new Batch Input Session, because when i run the Start Direct Input Program, one of the messages that comes up refers back to the original project name - not my renamed Project. --> "Session Name OLD PROJECT NAME was opened"
(The steps available on my screen do not include a "Create Batch Input Session" step, as some of the posted answers show)
Thank you for your help.

Hi Sandra, Thank you for your reply. I am not sure what you mean by restart. if you mean go through all the steps- yes, i went through all the steps again. I also exited out of the LSMW screen completely and went back in to my project and redid the read and convert data again, just to be sure, but i am still missing the new field in display converted data.
The only change i made to the Project was to change the name of the Project, subproject, and object and to add a field to the Source Fields and Field Mapping - for field mapping i used the default rule of Transfer(move)and my source and code seems to be correct - in that i followed the example of all the other fields. i also changed the name of the file where my new csv file was located, but i did not change the names of the read and converted data files. Perhaps i need to change something else? It seems to me that it is still using the instructions from the old project to convert the data. Thanks again.

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is '''Fx'''

Problem with missing colors when printing

It has been sugested by HP that I try this forum for help.
The following is a copy of the email I sent them which describes my problem, I hopesomeone can help! Thanks.
language_code : en
language : English
Country of Residence : France
product_line : 83
product_oid : 59868
product_name : HP Deskjet 840c Printer
part_number : C6414K,C6414J,C6414A,C6414G,C6414N,C6414H
purchase month : 8
purchase year : 1996
problem area : color and print quality problems
serial number : [Text removed for privacy]
operating system : Microsoft Windows Vista Home Premium 32
How is your product connected to your PC? : USB Cable
problem description : When I try to print a page containing coloured items the coloured parts fail to print. (The items are totally missing, they are not replaced by grey scale images) I have done all the usual things as per list:-
troubleshooting : 1) Rebooted my computer.
2) Disconnected the USB cable and reconnected it.
3) Changed the colour cartridge.
4) Examined the printer settings in the control Panel, colour is selected and all other settings seem normal.
5) De-selected the printer as the "Default Printer" and re-installed it.
6) Run software that checks the driver is up to date and it is.
7) Printed the built in test page "beautiful color made easy" only the header and footer print,no colour!
setting changes : No, nothing has been changed.
PS. I have owned my printer for many years and cannot remember the purchase date.
tech skill : Intermediate
first name : Grant
last name : W[text removed for privacy]
This question was solved.
View Solution.

Hi - Go ahead and try the steps in this document. It will walk you through cleaning the contacts on both the cartridge and in the carriage. What can happen over time is ink residue can accumulate on the contacts preventing the ink cartridges from working properly. If this doesn't resolve the issue, try setting the cartridge with the nozzles face down on a damp paper towel for about 45 seconds just to resolve any problems with the ink nozzles.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Can`t install idt / no sound / missing driver component (THE USUAL **bleep**IN IDT PROBLEMS)

Hey,
first of all i want to excuse my vulgar language (aswell as my orthography), but honestly?
since around one week i got serious problems with my sound drivers, i have tried many things to resolve these issues already and am now close to despair browsing these forums thinking whether or not i should just throw this laptop out and never go back to hp.
how it all started:
So i will try to start over. Since last week my audio fails and i encountered various problems while reinstalling the drivers, reinstalling the BIOS, reseting my laptop to factory settings and practically trying everything.
It all started with me being unable to adjust the volume and beats audio not responding. i shortly before tried updating to windows 8.1 though i doubt this update had anything to do with the issues (after rerolling to factory settings later that week the problem reaccured). the sound just vanquishes shortly after a restart. restart problems began to appear
Symptoms:
-generall:
Failing Sound
- Windows displays sound in the sound regulating system but there just isn`t anything to hear
Failing reboots (yes and this one is freaking me out, my laptop sometimes goes into blackscreens when trying to restart. if shutting down and booting this problem is unexistant. but yet i am very rarely able to restart the computer with the corresponding function. sometimes it works without problems though. )
-IDT:
since a day i get the massage that the detected hardware isn`t supported by the software package. i never got this massage before during tons of idt installations. since estimatedly the same point in time beats audio is unexistant and i run on windows default audio drivers.
-Default drivers:
sound very quiet and aswell vanquishing completly after some time
what i tried up to now:
i tried downloading drivers directly from here and i tried repairing them with the HP recovery manager, i tried reinstalling pretty much every driver, in my IT-incompetence just making sure there isn`t some problem with how other drivers cooperate with the idt audio codec. espacially the fingerprint driver was giving me headaches since this totally irrelevant **bleep** wasn't working since quite some time and somewhere on the net i saw a support thread about faulty validity drivers being the cause for other problems. i also, as suggested, tried random power resets inbetween the hundret restarts i have run, to no success. i rerolled to factory settings and still the sound would be no more, shortly after rebooting. sometimes deleting random (not realy that random, more like it have been many and i can't say wich shutdown was successfull anymore) prozesses helped, and i suddenly had cound again, sometimes deleting some programs like the fingerprintscanner driver or others, helped and restored the sound for a longer period, but in the end, it faded once more.
a short brakethrough was the chipset driver reinstallation, providing me with sound for estimatedly 2 hours.
but right now, i don`t know what to do anymore since i have no idt driver whatsoever on my pc at the moment and i can`t instal one. also i am to ennoyed to perform another reroll.
to the support administration (If something like that is existant):
SERIOUSLY i found TONS of people describing nearly the same problems and i was always enlightened by the helpfull Hp employees redirecting every last one of them to a driver link that neither changed anything.
Please don`t misunderstand me, i know you guys might want to help, and this defenitly isn't ment to criticise any one who tries to help in these forums. But not even one of the corrresponding threads recieved a solution? PLS HP JUST TRY to **bleep**ing answer what the hell is goes on with your Audio devices.
i will post this as it is right now since i have no time to recheck if everything is said. maybe later. gotta go. hope someone can help.
cheers.
desperate
PS.: system information c+v :
OS-navn Microsoft Windows 8
Version 6.2.9200 Build 9200
Anden OS-beskrivelse Ikke tilgængelig
OS-producent Microsoft Corporation
Systemproducent Hewlett-Packard
Systemmodel HP ENVY TS 15 Notebook PC
Systemtype x64-based PC
System-SKU E2T53EA#UUW
Processor Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, 2401 Mhz, 4 Kerne(r), 8 Logisk(e) processor(er)
BIOS-version/dato Insyde F.24, 27-08-2013
SMBIOS-version 2.7
Version af integreret controller 147.72
BIOS-tilstand UEFI
BaseBoard-producent Hewlett-Packard
BaseBoard-model Ikke tilgængelig
BaseBoard-navn Hovedkort
Platformrolle Mobiltelefon
Sikker bootstarttilstand Slået til
PCR7-konfiguration Binding er ikke mulig
Windows-mappe C:\Windows
System-mappe C:\Windows\system32
Startenhed \Device\HarddiskVolume2
Installeret fysisk hukommelse (RAM) 4,00 GB
Fysisk hukommelse i alt 3,78 GB
Tilgængelig fysisk hukommelse 1,96 GB
Virtuel hukommelse i alt 7,28 GB
Tilgængelig virtuel hukommelse 5,26 GB
Plads til sidefil 3,50 GB
Sidefil C:\pagefile.sys
Hyper-V - VM-udvidelser af overvågningstilstand Ja
Hyper-V - Udvidelser af adresseoversættelse på andet niveau Ja
Hyper-V - Virtualiseringsaktiveret i firmware Nej
Hyper-V - Forhindring af datakørsel Ja

Okay while i still got no answer in this forum my problem becomes harder and harder to track down for me.
i just installed a BIOS update (it was recomended by the hp assistant) wich ran smoothly untill i first got a litle concerned when seing a -maybe just misleading- text panel. It was just after the BIOS update was completed, and i have been informed not to turn of my computer during some minutes in wich the screen may stay blank and various LD lights might blink. It initiated, just like i thought it would. The screen went 2 times from enlightened black to black while keyboard LEDs flashed. So far so good.
But than this blue panel shows up saying "Flashing Boot Block", nothing flashes for a while in wich a progression is shown in percentages underneath this very panel.
Now to get back to the Topic: WHY is my Soundcard or Driver again DEINSTALLED after this BIOS update??????
I had it before! it still stopped working -the sound stopped- some times but it was there!! and it might well work the next time i open my laptop to watch a video listen to music or play a game! So why is it gone after this BIOS update? i will ofcourse check if i may now install the drivers for my Product but i am not confident that it will succeed.. lets hope so...
I just try to understand what is going on and therefor a short explaining answer to some of the questions i hinted to within my posts would be very appreciated.
Best regards, a believing support forum user..

Problems with 3D games: missing QT component?

I'm having trouble getting Nanosaur II: Hatchling to run on my iMac G5. It worked fine under 10.3.9 & QT6 until I reformatted my hard drive, installed Tiger and reinstalled the game from the DVD that came with my computer. I'm running 10.4.2 with Quicktime 7.0.1 and whenever I try to launch the game it crashes after allowing me to choose the resolution and then displaying a couple of error dialog boxes:
"DrawPictureIntoGWorld: GetGraphicsImporterForFile failed! One of Quicktime's importer components is missing. You should reinstall OS X to fix this."
and
"SetMetaObjectToPicture: DrawPictureIntoGWorld failed!"
I get the same errors from Pangea's Enigmo. I also can't get Warcraft III (with Frozen Throne expansion installed) to work. The intro video played fine but then I get just a pointer but no background in what should be the menu screen and nowhere on the (blank/black) screen responds to clicking (no errors displayed). (Incidentally, GarageGames' Marble Blast Gold is working fine but World Book 2004 won't show any articles).
I've tried re-installing the various games, Tiger and QT7 several times, both as updates and as a clean installation of the OS (archive and install) and none of this makes any difference.
Can anyone please help?

did you try updating nanosaur? there is an update from their site. my problem is that i can't get player 1 and 2 controls working at the same time.

HT1296 When i attempt to sync my iphone it continues to say this computer is no longer authorized for apps and they will be deleted?? I don't understand?? I put my password and authorize but same message comes up. What to do??

When i attempt to sync my iphone it continues to say this computer is no longer authorized for apps and they will be deleted?? I don't understand?? I put my password and authorize but same message comes up. What to do??

I found the solution in another post. By deleting all my apps, I was able to sync the phone. I hope I don't have to delete all my apps every time I want to sync my phone, but at least now I am able to sync my phone.

Hi i am having a problem with itunes on this computer so i had to remove it and tryed to download it again and now every time the computer comes on i get a notification which says "the program cant start because MSVCR80.dll is missing from your computer

hi i am having a problem with itunes on this computer every time the computer comes on i get a notification which says"the program cant start because MSVCR80.dll is missing from your computer,try reinstalling the program to fix this problem" but when i click on ok it just keeps popping up 4-5 time and then gone.and i cant dopwnload the itunes again.help

You need to work through the user tip: https://discussions.apple.com/docs/DOC-6562

Does anybody know if Windows 8 is causing a problem with iTunes? Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere. Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

Does anybody know if Windows 8 is causing a problem with iTunes? Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere. . Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I have a Macbook OSX Version 10.6.8 and I have problem with Movie application 7.1.4 (585) when I try to open it a statement said "MIssing Quicktime Components, re install from Movie Installer" my operation system is snow leopard. Help please!

I have problem with the Movie application 7.1.4 (585) when I try to open it a statement indicate that there are some "MIssing Quicktime components, re-intall from movie installer" . How can I fix thi problem. Please help.

Acrobat Support

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

See Troubleshooting issues with iTunes for Windows updates.
tt2

4.1.1 SDK Problems with missing xpacket tags in sidecar XMP files

The current 4.1.1 SDK has problems with sidecar XMP files that don't have the xpacket headers and trailers, i.e:
<?xpacket begin='ï»¿' id='W5M0MpCehiHzreSzNTczkc9d'?>
<?xpacket end='w'?>
is missing. Now, unfortunately Adobe Bridge CS2/CS3 does not export these xpackets in sidecar XMP files.
The standard, http://www.aiim.org/documents/standards/xmpspecification.pdf, is also very vague about it all:
● Write external metadata as though it were embedded and then had the XMP Packets
extracted and catenated by a postprocessor.
The grammar is strange(past tense had) and the spec implies that the xpacket should be extracted and again catenated... Someone should review this document and clearly state if xpacket statements should be in sidecar files or not. I suspect myself that they should be there, but the standard is very vague.
Anyway, there are two places in the SDK code where changes might be needed:
XMPFiles::Initialize has XMP_Asserts in case the xpacket header/trailer is missing, but the underlying assert is only active in debug builds.
XMPScanner::PacketMachine::FindNextPacket () also has in its truth table the assumption that the xpackets exist.
There could be even other places in the code that assumes that the xpacket tags are present in all files, which includes text XMP sidecar files.
Anyway.
a) Shouldn't bridge export the xpacket tags? Same with any other application?
b) If the spec is vague, then the SDK should not assume that the xpacket tags are present.
Any comments? Has someone already fixed this issue as I suspect a lot of apps using the the XMP SDK would break concerning reading XMP sidecar files? Thx, Kent

I was able to work around the problem by creating a mapped view of the .xmp file (this creates an array in memory backed by the file on disk, so there's no need to read the file into a separate internal buffer), and constructing the SXMPMeta object directly from the buffer. (The ctor for that class calls ParseFromBuffer, so this is the same thing as was suggested by other messages in this thread.)
It seems that Adobe needs to do one of these things:
(1) say that Bridge CS3 has a bug, and agree that Bridge CS3 should include a proper xpacket header when writing xmp sidecar files
(2) say that the XMP Toolkit has a bug, and that the SDK should be able to parse sidecar files without an xpacket header, and agree to fix the toolkit
(3) say that Bridge CS3 and the XMP Toolkit behave as expected, but then provide a sequence of steps by which users of the XMP Toolkit are expected to read xmp sidecar files written by Bridge CS3
Does Bridge CS4 write an xpacket header to the xmp sidecar files?
Maybe what I could do is create a custom file handler for .xmp sidecar files, so I could use the SXMPFiles for everything, instead of having to special-case .xmp files.
My needs are pretty modest though, and it might be just as simple to use the MS DOM-based XML parser for load the xmp sidecar file. I bet I could get the data I need (only the "Rating" for now) using a simple XPath expression.
-Matt

When I tried to open PS CC2014, it flashed a bit then quit, same with DW and INDD ... I also got this error message: Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the C

This morning when I tried to open my CC2014 Photoshop, it started to open, then quit suddenly. Same with Dreamweaver and InDesign. I am a professional and do not have the time to screw around with this. When I tried to run CC app, I get an error that says "Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'." I did so and tried to run the app and got the same error. I tried the cleaner and it removed all of my apps, then I tried to install again, and got the same error. I am getting desperate now, I have clients waiting for their projects. I need help, please.

Allisonf55952352 have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to resolve the current error? If not do you have any questions regarding the steps listed with the document?

I miss my Greasemonkey, I understand it's a problem with FF4 and 64 bit.

Similar Messages

Maybe you are looking for