I missed some steps during the installation process of iOS7 to my iPhone. How do I fix it?
I have a 16GB, white, not jailbroken 4S. During the instalation process it asks me to connect to wi-fi to set someting about the Find my iPhone, iCloud and iMessage. Unfortunately I don't have wi-fi so I just click the "continue " at the top-right corner. How do I fix it? Please help.
What I did was I accept the terms and condition for the iCloud.
I turned on my iMessage. I still have questions.
First for the iMessage, how will you know if you're using the iMessage?
Will there be deductions to my credit if I'm using iMessage?
And my third question is, I press the "Lost Mode" in Find my iPhone app, ask me a number to where the person who found my iPhone can call me, followed some steps, and after a minute it appeared that my iphone is lost and there's a message like "this iPhone is lost, please call this number". Is it normal?
Sorry for having many questions, I'm still not used to iOS7. Hope you can answer all my questions
Similar Messages
-
An error occurred during the installation process: error occurred while installing additional adobe
I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB. Any one else with same issue? Trevor
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
When trying to install an Adobe extention, during the installation process I get this message-----"This extention cannot be installed----requires version 13.0 or greater." I am installing through Photoshop CC------appreciate any help.
Hi Gary. Extensions have to be written for the specific Photoshop versions they are designed to run on.and definitely don't all run on every version of Photoshop. You'd think that you'd be OK with that message, but it might be that it works fine on CS6 (13) but not on CC (14).
But it could be an error.
What is the extension you are trying to install? Is Photoshop, and Extension Manager fully up to date? If you are sure that the extension runs on CC, I'd try un installing, and reinstalling the Extension Manager. I have had to exactly that a while back. -
Why can't I uninstall AirPort 4.2 from my Windows 7 PC.. I tried downloading and reinstalling the 4.2 but during the installation process I get an error. It reads... "1608: Unable to Create InstallDriver instance Return Code -2147024894
You should not install it again..
Boot the computer into safe mode and try the uninstall again.
No luck you will have to manually uninstall which is a pain. Delete the files and open regedit and delete the registry entries.. better still use the system restore to go back to a previous system where you had no 4.2 installed..
Or just ignore it and install the latest 5.6.1 and if it gives trouble well do a clean install of windows. -
What do I do when installing a mac security update freezes during the installation process?
Got an update notice the other day that a critical security update needed to be done right away. The update downloaded and then 90% through the installation it all froze. I can't do anything with the screen. Anyone out there have a suggestion?
As stevejobsfan0123 explained perfectly, Classic apps only works with Mac OS X 10.4 or older, so it's not possible to run it on your Mac, but there's another problem: MathCAD 15 isn't compatible with OS X, so you will have to buy the Windows version and install Windows on Boot Camp > http://www.apple.com/support/bootcamp
-
Need help can`t update my Lightroom 5.5 Version. Seems to be an registry error?!
The original Text is in german try it with translation:
Original message:
Key not valid for use in specified state. -
I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again. -
Can't download iTunes on my laptop receive following error message- an error occurred during the installation of assembly Microsoft vc80.CRT.type="win32", version 8.0.50727. 6195 public key token= ifc8b3b9a1e18e3b process architecture=x86hresult:0073
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Help - I keep getting this message when trying to install iTunes on my computer - I have tried it on 2 different computers - one with Windows 7 and one with Vista - getting same message for both.
"An error occured during the installation of assembly 'Microsoft.VC.80.CRT,version="8.0.50727.4053",type="win32".publicKeyToken="1fc8 b3b9a1e3b".process orArchitecture="x86"".Please refer to Help and Support for more information. HRESULT: 0x800736FD.
ThanksHRESULT: 0x800736FD
Are you running Vista or Windows 7, josh? -
I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.anybody answer me fast
-
an error occurred during the installation of assemble
microsoft.vc80.crt,type=''win32'',version=''8,0.50727,4053'',publickey token=''1fc8b9a1e18e3b'',process
or architecture=''amd64''.please refer to help and support for more information,hresult:0x800736fd.Hi,
You may disable antispyware and antivirus software or remove adware or spyware from your computer and then install Acrobat or Adobe Reader as BrianD_22932 mentioned.
As I known, a certain type of adware running on the system can cause 1935 errors.
I would like to suggest you remove adware and then install Acrobat or Adobe Reader.
1. Start the Task Manager.
2. Look at the Processes tab. Look for a process named wtoolsa.exe.
3. If this process is running, then you remove this adware.
4. Install Acrobat or Adobe Reader again.
In some cases, the 1935 error results from orphaned registry keys from a different version of the .NET Framework than the one being installed. Uninstalling the .NET
frameworks, removing orphaned registry keys that can remain, then reinstalling the .NET Framework can help in this situation.
Regarding the error 1935, it seems this is a general Acrobat related issue, I would like to share the link below with you:
Acrobat X installation freezing windows 7
http://forums.adobe.com/message/3292028
Please follow the steps from the link above to fix the issue.
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support -
Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?
You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.
-
At first i got a problem with my Apple Mobile Device Support, but then after i've done some research browsing the net on how to fix that problem, i've finally found the solution to that problem... However, after I've finish installing and trying to run ITunes, there's a pop up says Error 2 , Apple Application Support is needed to run ITunes.... So i've followed the instruction and suggestions given out which is to extract my iTunes64Setup and install Apple Application Support standalone manually, but during the installation, an error pops out that really really really could give me cancer.... the error goes like this-
""An error occured during the instilation of assembly "Microsoft.VC80.CRT,type+"win32",version="8.0.50727.6195"publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x80070BC9.""
God knows how many times i've reinstalled Itunes, and how many pages i've been thruu just to look for a solution to this problem..... PLEASE HELP ME IM BEGGING YOU TO WHOEVER HAVE ANY IDEA ON HOW TO FIX THIS T^T
Im running on Window 7 ultimate 64-bit btw...OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra
Maybe you are looking for
-
Howdy people, I've been stuck on this problem for a while now. I writing a povvy hex-editor, and it works (yay!), but when I open largish files (>= 20kB) it really chokes on it. Not on the conversion from bytes to hex string, but (you guessed it) dis
-
I downloaded adobe flash player 11.4 r402, my cpu overheats all the time now.
I am running winodows vista with firefox 17.0.1 and I downloaded adobe flash player 11.4 r402. Whenever flash is used on a page or I use realplayer my cpu starts to overheat. this player is constantly using too much of my cpu and I have to end proces
-
Caller ID not displaying correctly on some call recipients' phones
This isn't necessarily an iPhone issue - a similar issue appears on other boards. But I haven't seen an answer that will help me, so here goes: My wife and I share a VZW account. She has the iPhone, and today she found out that when she makes a cal
-
Hi, I live in Canada and I want to send a Happy Holidays card tomy family in another country using Cards. Does anyone knows if they are printed and sent from US or does Apple print and send them from their nearest office to that country? Thanks in ad
-
Acrobat won't start after Reader for Palm OS
That's basically the problem. I can't open any PDF files since I got Adobe Reader for my new Treo running the Palm OS. It's ver 3.05, Build20030829. Should I uninstall Reader, or is there something I'm missing?