I missed to add Standby Logfile groups? What now?

Hi there
I have created a Standby database in a test environment using RMAN   (followed the procedure given here -> URL: Creating a Standby Database with Recovery Manager).
When I tried to start the recovery on Standby, I got the following error:
[code]
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT
ERROR at line 1:
ORA-38500: USING CURRENT LOGFILE option not available without stand
SQL> select NAME, OPEN_MODE, GUARD_STATUS, DATABASE_ROLE from v$database;
NAME      OPEN_MODE GUARD_S DATABASE_ROLE
PRIM      MOUNTED    NONE    PHYSICAL STANDBY
SQL>
[/code]
I missed the step to add standby logfile groups. Do I need to recreate the Standby database now? I mean, add standby logfile groups to Primary, then take full RMAN backup and recreate the standby database (following the procedure described in the URL above)?
I am using Oracle 10gR2 on OEL 5.8.
Please advise!
Best regards

OK thank you both - I have added the standby logfile groups both on Primary and Standby (mounted) database and I was able to successfully issue the following command:
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;
I hope this was the right thing to do under the circumstances, right?
And now there seems to be a gap:
PRIM_SQL> SELECT MAX(SEQUENCE#) FROM V$ARCHIVED_LOG;
MAX(SEQUENCE#)
11
STDBY_SQL> SELECT MAX(SEQUENCE#) FROM V$LOG_HISTORY;
MAX(SEQUENCE#)
9
I issued "alter system switch logfile" few times on the Primary but logs don't seem to be shipping? How to check this and fix?
EDIT: OK I checked the Primary alert log file and see following messages:
Error 1031 received logging on to the standby
Tue Jun 25 15:22:43 2013
Errors in file /u01/app/oracle/admin/prim/bdump/prim_arc0_6880.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'stan'. Error is 1031.
Tue Jun 25 15:27:43 2013
Error 1031 received logging on to the standby
Tue Jun 25 15:27:43 2013
Errors in file /u01/app/oracle/admin/prim/bdump/prim_arc0_6880.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'stan'. Error is 1031.
Tue Jun 25 15:32:43 2013
I do have password file both on Primary and Standby servers. What is this "ORA-01031: insufficient privileges" referring to?
EDIT#2:
I copied the password file from Primary DB server to Standby server (with same name "orapwprim" - previously I used "orapwstan" name for standby password file) and the "login issue" is resolved. But now I see following error in the alert log file on Primary:
PING[ARC0]: Heartbeat failed to connect to standby 'stan'. Error is 1031.
Tue Jun 25 15:48:08 2013
ARCH: Possible network disconnect with primary database
Any clues here?
EDIT#3:
Sorry I was a bit impatient I guess.The logs a re being shipped and applied now.
Thank you both!
Best regards
Message was edited by: user130038 (added alert log file info)
Message was edited by: user130038 (Added EDIT#2)
Message was edited by: user130038 (added EDIT#3)

Similar Messages

ALTER DATABASE ADD STANDBY LOGFILE GROUP

version 10 & 11g
creating standby logfile groups on primary db is optional or needed? what could be advantages of both?
I am reading 2 articles one is creating that other not?
http://www.orafaq.com/node/2030
& 736863.1 Notes

DBA2008 wrote:
version 10 & 11g
creating standby logfile groups on primary db is optional or needed? what could be advantages of both? at primary database it is optional ,but it would be good candidate for switchover activity , it makes ensure that if you make any planned maintenance activity at primary site and switchover within yours data guard environment from primary database to physcial standby database ,if you create standby redo log at primary database it is not in use right now but it will be used when yours primary database switch to standby database after switching to physical standby databsae as a primary database.
Khurram

Standby logfile missing error

Hello all,
I am getting this following error in standby alertlog file.
ORA-00313: open failed for members of log group 8 of thread 2
ORA-00312: online log 8 thread 2: '+DG_FLASH/hsstl/onlinelog/group_8.273.779638759'
ORA-17503: ksfdopn:2 Failed to open file +DG_FLASH/hsstl/onlinelog/group_8.273.779638759
ORA-15012: ASM file '+DG_FLASH/hsipstl/onlinelog/group_8.273.779638759' does not exist
ORA-00312: online log 8 thread 2: '+DG_DATA/hsstl/onlinelog/group_8.1766.779638759'
ORA-17503: ksfdopn:2 Failed to open file +DG_DATA/hsstl/onlinelog/group_8.1766.779638759
ORA-15012: ASM file '+DG_DATA/hsipstl/onlinelog/group_8.1766.779638759' does not exist
When i manually check the diskgroup '+DG_FLASH, +DG_DATA, i can see the group_8 file with some other numbers.
Kindly let me know how to proceed for that. oracle 11g database, standalone standby database in aix box
My guess is control file is still thinking that the group 8 file is present and looks for it when starting the standby, but actually that file is not there in the diskgroup. instead some other filename is there for the same group.
Either i want to update the control file about the new log group 8, or drop the log 8 group, delete the log 8 group files from the disgroups +DG_FLASH, +DG_DATA and create a new log 8 group
Kindly suggest
Regards,

Test
SQL> Select GROUP#, THREAD#, SEQUENCE#, BYTES from v$standby_log;
GROUP# THREAD# SEQUENCE# BYTES
4 1 0 52428800
5 1 1327 52428800
6 1 0 52428800
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> ALTER DATABASE ADD STANDBY LOGFILE GROUP 7 '/u01/app/oracle/oradata//redo07.log' SIZE 50M;
Database altered.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
SQL> Select GROUP#, THREAD#, SEQUENCE#, BYTES from v$standby_log;
GROUP# THREAD# SEQUENCE# BYTES
4 1 0 52428800
5 1 1327 52428800
6 1 0 52428800
7 0 0 52428800
ALTER DATABASE CLEAR LOGFILE GROUP 7;
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> ALTER DATABASE CLEAR LOGFILE GROUP 7;
Database altered.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
SQL> Select GROUP#, THREAD#, SEQUENCE#, BYTES from v$standby_log;
GROUP# THREAD# SEQUENCE# BYTES
4 1 0 52428800
5 1 1327 52428800
6 1 0 52428800
7 0 0 52428800
SQL> /
GROUP# THREAD# SEQUENCE# BYTES
4 1 1330 52428800
5 1 0 52428800
6 1 0 52428800
7 0 0 52428800
What I noticed is no matter how many switches I do the Standby only uses group 4 and 5. If I recreate with a Thread number it seems to work.
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> ALTER DATABASE DROP STANDBY LOGFILE GROUP 7;
Database altered.
SQL> !rm /u01/app/oracle/oradata//redo07.log
SQL> ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 7 '/u01/app/oracle/oradata//redo07.log' SIZE 50M;
Database altered.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
SQL> Select GROUP#, THREAD#, SEQUENCE#, BYTES from v$standby_log;
GROUP# THREAD# SEQUENCE# BYTES
4 1 0 52428800
5 1 1343 52428800
6 1 0 52428800
7 1 0 52428800
SQL>
Check
SQL> select GROUP#,BYTES/1024/1024/1024 , STATUS, FIRST_TIME,NEXT_TIME from v$standby_log;
GROUP# BYTES/1024/1024/1024 STATUS FIRST_TIM NEXT_TIME
4 .048828125 UNASSIGNED
5 .048828125 ACTIVE 29-NOV-13
6 .048828125 UNASSIGNED
7 .048828125 UNASSIGNED
SQL>

Can't switch standby logfiles to status=active

Hi DBA's
I'm trying to create logical standby on 10.2 on fedora 6 on manual http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#g88234
I can't create proper working standby redo logs.
ALTER DATABASE ADD STANDBY LOGFILE GROUP 4
('/u01/app/oracle/oradata/ORCL/onlinelog/log4a.log',
'/u01/app/oracle/flash_recovery_area/ORCL/onlinelog/log4b.log') SIZE 50M;
then create the rest of standby redos and switch logfile:
ALTER SYSTEM SWITCH LOGFILE;
when:
SQL> SELECT GROUP#,THREAD#,SEQUENCE#,ARCHIVED,STATUS FROM V$STANDBY_LOG;
GROUP# THREAD# SEQUENCE# ARC STATUS
4 0 0 YES UNASSIGNED
5 0 0 YES UNASSIGNED
6 0 0 YES UNASSIGNED
What to do?
Edited by: val75 on Jun 21, 2009 11:08 PM

try switch log at primay
please try to run this Command and then open the primary database.
alter database set standby database to maximize performance;
alter database open;

Standby logfiles

In the following doc: http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/log_transport.htm#BABCBEGJ
it says:
For example, assume that the redo log on the redo source database has two redo log groups and that each of those contain one 500 MB redo log file. In this case, the standby redo log should have at least 3 standby redo log groups to satisfy the requirement that a standby redo log must have at least one more redo log group than the redo log at the redo source database.
The following SQL statements might be used to create a standby redo log that is appropriate for the previous scenario:
ALTER DATABASE ADD STANDBY LOGFILE
('/oracle/dbs/slog1.rdo') SIZE 500M;
ALTER DATABASE ADD STANDBY LOGFILE
('/oracle/dbs/slog2.rdo') SIZE 500M;
ALTER DATABASE ADD STANDBY LOGFILE
('/oracle/dbs/slog3.rdo') SIZE 500M;
The doc says there needs to be one more group and then demonstrates creating no seperate groups. Did they mean to say one more file or did they mean to create groups such as this:
ALTER DATABASE ADD STANDBY LOGFILE GROUP 1...
ALTER DATABASE ADD STANDBY LOGFILE GROUP 2...
ALTER DATABASE ADD STANDBY LOGFILE GROUP 3....

In the example the primary database has two log groups, and then they create 3 standby log groups on the standby. This is exactly what they recommend (standby = primary + 1).

ORA-01184: logfile group 1 already exists

After startup nomount, I try to create database as follows:
CREATE DATABASE SISDEV04
     LOGFILE GROUP 1 '/sisdev04/dbs/log01a.dbf'
SIZE 10M
     ,     GROUP 1 '/sisdev04/dbs/log01b.dbf'
SIZE 10M
     ,     GROUP 2 '/sisdev04/dbs/log02a.dbf'
SIZE 10M
     ,     GROUP 2 '/sisdev04/dbs/log02b.dbf'
SIZE 10M
     NOARCHIVELOG
     CHARACTER SET ZHT16BIG5
     NATIONAL CHARACTER SET ZHT16BIG5
     DATAFILE '/sisdev04/dbs/system01.dbf'
          SIZE 210M AUTOEXTEND OFF
     , '/sisdev04/dbs/rbs01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/temp01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/users01.dbf'
SIZE 1050M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ivr01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ivr01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
However, I receive such error:
ORA-01501: CREATE DATABASE failed
ORA-01184: logfile group 1 already exists
I have checked that there is no files in '/sisdev04/dbs/' before I issue the command, what can I do?

Hello...
Excuse me..
May be I have same problem..
I use Oracle Streams to replicate table in one to another database. While i configure setup replication occur this errror.
How to resolve this problem i have?
SQL> SQL> Connecting to source database as STRMADMIN
SQL> Executing ..
SQL> connect STRMADMIN/******
SQL> Connected.
SQL> SQL> SQL> Executing ..
SQL> DROP DATABASE LINK DBSTG
SQL>
Database link dropped.
SQL> SQL> Executing ..
SQL> CREATE DATABASE LINK DBSTG connect to strmadmin identified by ****** using '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=10.4.10.21)(PORT=1521)))(CONNECT_DATA=(SID=dbstg)(server=DEDICATED)))'
SQL>
Database link created.
SQL> Executing ..
SQL> ALTER SYSTEM SET LOG_ARCHIVE_CONFIG='DG_CONFIG=(dbstg,dbsd)' scope=both
SQL>
System altered.
SQL> Executing ..
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_3='SERVICE="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=10.4.10.21)(PORT=1521)))(CONNECT_DATA=(SID=dbstg)(server=DEDICATED)))" ASYNC NOREGISTER VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dbstg' scope=both
SQL>
System altered.
SQL> Executing ..
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_3=DEFER scope=both
SQL>
System altered.
SQL> CONNECT TO DOWNSTREAM DB AND SETUP LOG PARAMS
SQL> Executing ..
SQL> connect strmadmin/******@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=10.4.10.21)(PORT=1521)))(CONNECT_DATA=(SID=dbstg)(server=DEDICATED)))
SQL> Connected.
SQL> SQL> Executing ..
SQL> DROP DATABASE LINK DBSD
SQL>
Database link dropped.
SQL> SQL> SQL> Executing ..
SQL> CREATE DATABASE LINK DBSD connect to STRMADMIN identified by ****** using '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=t0031)(PORT=1521)))(CONNECT_DATA=(SID=dbsd)(server=DEDICATED)))'
SQL>
Database link created.
SQL> Executing ..
SQL> CREATE OR REPLACE DIRECTORY STANDBY_LOG_LOC AS '/u01/app/oracle/admin/dbstg/srl_dbsd/'
SQL>
Directory created.
SQL> 1* CREATE OR REPLACE DIRECTORY STANDBY_LOG_LOC AS '/u01/app/oracle/admin/dbstg/srl_dbsd/'
SQL> Executing ..
SQL> ALTER SYSTEM SET LOG_ARCHIVE_CONFIG='DG_CONFIG=(dbstg,dbsd)' scope=both
SQL>
System altered.
SQL> Executing ..
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_3=ENABLE scope=both
SQL>
System altered.
SQL> Executing ..
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_3='LOCATION=/u01/app/oracle/admin/dbstg/srl_dbsd/ VALID_FOR=(STANDBY_LOGFILE,PRIMARY_ROLE)'scope=both
SQL>
System altered.
SQL> Executing ..
SQL> ALTER DATABASE ADD STANDBY LOGFILE GROUP 4 ('/u01/app/oracle/admin/dbstg/srl_dbsd/log4a.rdo', '/u01/app/oracle/admin/dbstg/srl_dbsd/slog4b.rdo') SIZE 104857600
SQL> ALTER DATABASE ADD STANDBY LOGFILE GROUP 4 ('/u01/app/oracle/admin/dbstg/srl_dbsd/log4a.rdo', '/u01/app/oracle/admin/dbstg/srl_dbsd/slog4b.rdo') SIZE 104857600
ERROR at line 1:
ORA-01184: logfile group 4 already exists
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Error from SQLPLUS: 160

Add logfile group without shutting down first? (10g R2)

Can I add a logfile group without first shutting down the instance? I don't see any clear statement about this in my Alapati 10g Admin book or any Oracle 10g R2 docs. Citations appreciated. Maybe this is one of those "too obvious to publish" things. My guess is that Oracle 10g R2 is smart enough to know not to write to new logfile group members until it is fully created and available for use.
Thanks.

Hello,
Is the presumption that any "ALTER DATABASE" operation can be done online in 10g? Not Any, but Some, Yes.
For instance, the ALTER DATABASE ARCHIVELOG statement cannot be done online ( the Database should be mount ).
However about the ALTER DATABASE ADD LOGFILE statement, as previously posted, it can be done online. I've already done it on a running Production Database.
Just be careful to set the same SIZE as for the other Logfile Members.
Hope this help.
Best regards,
Jean-Valentin

Standby logfile

Since setting up RMAN control file autobckup on a dataguard set up I get the following message in the alertlog:-
Starting control autobackup
Sat May 07 01:04:27 2005
Control autobackup written to DISK device
handle 'CF_C-00'
Clearing standby activation ID 2115378951 (0x7e161f07)
The primary database controlfile was created using the
'MAXLOGFILES 9' clause.
There is space for up to 6 standby redo logfiles
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 104857600;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 104857600;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 104857600;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 104857600;
Can anyone tell me a bit more a bit what this message is saying and explain the pros/cons of adding these standby log files to the standby database??

Thanks for reply..I am really confused by this both the primary and standby have the same redologs set up (3 groups of 2 logs) so dont understand why it is asking me to add 4 logs to the standby? are these the same or different from the normal redo log groups? why is this message only appearing when the control file is autbacked up?

Standby logfile issue

I created a dataguard, one primary database and one physical standby. The protection mode is maximum protection. My issue is: everytime when I archive a logfile in primary, it will write to standby logfile in standby logfile. Then the standby logfile status will show 'ACTIVE', and can't reuse it. if I need archive standby logfile in standby database, then I can get the standby logfile reuse?
Now if I add one more standby logfile in standby database, I can archive a logfile in primary. Then I can't archive another more in primary, unless i add one more standby logfile in standby.
thanks a lot,
kelvin

Thank you everyone. Yes mike, I already 'recover managed standby database using current logfile disconnect from session'. And Emre, I have 3 logfile groups in primary, every group has 2 members. I am using ASM for storage. in standby, at beginning, I created 4 standby groups(every one has 2 members and same size with primary logfile). But after a while, the primary database shut down. I checked alert log in primary, mention 'no available standby logfile to use'. So I added another 4 standby logfiles ......
So anybody know, for the standby logfile, if we need archive those logfiles. So primary can reuse and write log to these standby logfile when primary database do a 'archive log current'. Now I believe my primary database can't reuse those standby logfile in standby database, so I need to add one more, one more standby logfile..
Thanks a lot,
kelvin

Oracle ORA_16000 when trying to add standby instance to existing rac node

I attempted to use dbca to add a new standby instance to an existing cluster. The cluster is 4 nodes, Linux RHEL 5.3 Oracle 11.1.0.7. Also using ASM, asmlib, ocfs2 and shared block devices.
ASM instances are up and functional on all nodes. current config appears to be running normally and correctly.
I have a 4 instance database running on the cluster. I also have 3 physical standby active data guard instances running on 3 of the nodes. I wanted to add a new ADG instance to the 4th node.
While running dbca I received ORA-00604 and ORA-16000.
The active data guard database was open (read only) and redo apply was on. I am using data guard broker as well, but not grid control.
Does anyone have a procedure for adding an instance in this environment? Do I need to have the standby in mount state? If dbca won't work does anyone have a manual procedure for adding a new instance?
Thanks

zulo
Let's say you adding node nusclust160## to you existing cluster and dbca is a pain to use.
Extend clusterware to the nusclust160## server.
re: Page 64 of Oracle® Clusterware Administration and Deployment Guide 11g Release 1 (11.1)
1a.
Add undo tablespace to support additional node.
Re-check space for DATA1 on nusclust16007 and /dbdata/ORADB on sun16109.
As of Thursday, May 21, 2009 the DATA1 asm group has 53,584M free.
As of Thursday, May 21, 2009 the /dbdata/ORADB has 77G free.
In a separate terminal window on nusclust16007 run the following in sqlplus
CREATE UNDO TABLESPACE UNDOTBS4 datafile '+DATA1' SIZE 13300M AUTOEXTEND ON ;
This will take a long time to create this tablespace. Please minimize the window after submitting the ddl and move on to the next step.
1b.
Insure .bash_profile on nusclust160## should look like this:
vi .bash_profile
export ORACLE_HOSTNAME=nusclust160##
export ORACLE_SID=ORADB4
export ORA_CRS_BASE=/apps/ocr/oracle
export ORACLE_BASE=/apps/dbs/oracle
export PATH=/usr/ccs/bin:/usr/X/bin:/usr/bin:/usr/sfw/bin:/usr/sbin:/usr/local/bin
export server=`uname -n`
export PS1="$ORACLE_SID@$HOSTNAME >"
alias cls='clear'
alias More='more'
alias ll='ls -lt | more'
Gather IP addresses for fourth node from /etc/hosts:
222.65.125.### nusclust160##
222.65.125.### nusclust160##-vip
10.333.248.### nusclust160##-priv
2. Start Oracle Universal Installer:
Go to CRS_home/oui/bin and run the addNode.sh script on one of the existing
nodes. Oracle Universal Installer runs in add node mode.
The Oracle inventory on nusclust16007, nusclust16008, and nusclust16036 are found under:
/home/oracle/oraInventory
Use a X windows enabled session (The OUI takes 33 minutes)
cd /apps/ocr/oracle/product/11.1.0/crs/oui/bin
./addNode.sh
a. In the first screen specify a new node as :
Public Node Name:          nusclust160##
Private Node Name:     nusclust160##-priv
Virtual Host Name:     nusclust160##-vip
If you receive the error:
" tar. ./bin/racgvip.orig: Permission denied"
Do the following:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
ls -al racgvip.orig
paste here:
chown root:oinstall racgvip.orig
chmod 771 racgvip.orig
should now show:
-rwxrwx--x 1 root oinstall 19213 Feb 11 08:36 racgvip.orig
As root:
a.
On nusclust160##:
cd /home/oracle/oraInventory
./orainstRoot.sh
b.
On nusclust16007:
cd /apps/ocr/oracle/product/11.1.0/crs/install
./rootaddnode.sh
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Attempting to add 1 new nodes to the configuration
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 4: nusclust160## nusclust160##-priv nusclust160##
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
/apps/ocr/oracle/product/11.1.0/crs/bin/srvctl add nodeapps -n nusclust160## -A nusclust160##-vip/255.255.255.224/bge0
c.
On nusclust160##:
cd /apps/ocr/oracle/product/11.1.0/crs/
./root.sh
WARNING: directory '/apps/ocr/oracle/product/11.1.0' is not owned by root
WARNING: directory '/apps/ocr/oracle/product' is not owned by root
WARNING: directory '/apps/ocr/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
OCR LOCATIONS = /raw/ocr/ocrconf1,/raw/ocr/ocrconf2
OCR backup directory '/apps/ocr/oracle/product/11.1.0/crs/cdata/rac_cluster' does not exist. Creating now
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/apps/ocr/oracle/product/11.1.0' is not owned by root. Changing owner to root
The directory '/apps/ocr/oracle/product' is not owned by root. Changing owner to root
The directory '/apps/ocr/oracle' is not owned by root. Changing owner to root
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: nusclust16007 nusclust16007-priv nusclust16007
node 2: nusclust16008 nusclust16008-priv nusclust16008
node 3: nusclust16036 nusclust16036-priv nusclust16036
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
nusclust16007
nusclust16008
nusclust16036
nusclust160##
Cluster Synchronization Services is active on all the nodes.
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
4. After this is done crs_stat -t will show nusclust160## in the crs i.e.
I see:
Name Type Target State Host
ora....160##.gsd application ONLINE ONLINE sun...160##
ora....160##.ons application ONLINE OFFLINE
ora....160##.vip application ONLINE ONLINE sun...160##
Do not be concerned about ora.nusclust160##.ons being OFFLINE, as that will be fixed shortly in a step that follows this one.
5. As oracle :
On nusclust16007:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
./racgons add_config nusclust160##:6251
This should take about one second to run.
If it says that it has already been added to the OCR you are fine.
If it hangs, you may need to reboot all servers to clear this issue.
6. Insure new node is properly added to ocr by running
On nusclust16007:
ocrdump
Check for the entries that show:
[DATABASE.ONS_HOSTS.nusclust160##.PORT]
ORATEXT : 6251
7. Check that your cluster is integrated and that the cluster is not divided into
partitions by completing the following operations:
On nusclust16007:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
./cluvfy comp clumgr -n all -verbose
Should see Verification of cluster manager integrity was successful.
8.
Use the following command to perform an integrated validation of the Oracle
Clusterware setup on all of the configured nodes, both the preexisting nodes
and the nodes that you have added:
AS oracle on nusclust16007:
cluvfy stage -post crsinst -n all -verbose
Post-check for cluster services setup was successful.
good: Post-check for cluster services setup was successful.
9.
On nusclust160## as oracle run the following:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
./crs_stat -t | grep OFFLINE
If you see this:
ora.nusclust160##.ons application ONLINE OFFLINE
then run this:
./crs_start -all
After:
./crs_stat -t
ora.nusclust160##.ons application ONLINE ONLINE nusclust160##
If you see the above then you can move on the next step.
Adding database binaries to the nusclust160## server and setting up the listener.
1.
From nusclust16007:
Open an X window (The OUI part takes 13 minutes)
cd /apps/dbs/oracle/product/11.1.0/db_1/oui/bin
./runInstaller -addNode ORACLE_HOME=/apps/dbs/oracle/product/11.1.0/db_1 $*
You should get a prompt to specify a new node, in this case you should see nusclust160## where you will need to put a check mark beside it.
2.
from nusclust160##:
Eventually you will be prompted to run the following as root on the new node
On nusclust160##
cd /apps/dbs/oracle/product/11.1.0/db_1
./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /apps/dbs/oracle/product/11.1.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
3. verification
Now set up the .bash_profile and .asm profile to on nusclust160## to support new ORADB4 and +ASM4 instances for the oracle userid.
On nusclust160##:
cp .bash_profile .bash_profile.bak
On nusclust16007:
sftp nusclust160##
put .bash_profile
On nusclust160##:
vi .bash_profile
change ORALCE_SID to ORADB4
cp .bash_profile .asm
vi .asm
change ORALCE_SID to +ASM4 in .asm file
which sqlplus
Should show the path below is $PATH environmental variable is set correctly.
/apps/dbs/oracle/product/11.1.0/db_1/bin/sqlplus
On nusclust160##:
oifcfg getif
This should show:
ce4 10.333.248.192 global cluster_interconnect
ce5 222.65.125.128 global public
4.
Run Netbackup Oracle Agent link script.
As oracle make sure ORACLE_HOME is fined.
env | grep ORACLE_HOME
then
cd /usr/openv/netbackup/bin/
./oracle_link
ls -al $ORACLE_HOME/lib/libobk.so
should show:
/apps/dbs/oracle/product/11.1.0/db_1/lib/libobk.so -> /usr/openv/netbackup/bin/libobk.so64.1
5.
On the target node, run the Net Configuration Assistant (NETCA) to add a
listener. Add a listener to the target node by running NETCA from the target node and
selecting only the target node on the Node Selection page.
I shall do the following on nusclust160## using X Windows
Now before I do this I see:
crs_stat -t
ora.nusclust160##.gsd application ONLINE ONLINE nusclust160##
ora.nusclust160##.ons application ONLINE ONLINE nusclust160##
ora.nusclust160##.vip application ONLINE ONLINE nusclust160##
Connect to nusclust160## and open up X windows session.
netca
Choose Cluster configuration.
select nusclust160## as the node to configure.
Choose Listener configuration, then Add.
When it prompts you for a listener name choose LISTENER as it will append _NUSCLUST160##(server name) to end of the LISTENER name to make a complete listener name.
At this point you will have listener to support the new node in the crs.
now
crs_stat -t
will show:
ora....0#.lsnr application ONLINE ONLINE nusclust160##
ora.nusclust160##.gsd application ONLINE ONLINE nusclust160##
ora.nusclust160##.ons application ONLINE ONLINE nusclust160##
ora.nusclust160##.vip application ONLINE ONLINE nusclust160##
At this point the necessary crs entries for gsd, ons, vip, and the listener on nusclust160## all we need now are the ORADB4 and +ASM4 instances added.
III. 7/11/2009 7:40 AM Sat [120 min] NTTA DBA
Use NON dbca method to create additional instances on the nusclust160## server. This will involve a complete shutdown of all RAC instances.
1.
Undo tablespace creation was taken care of in Step I,1. Check on the progress of the creation of tablespace UNDOTBS4 in the minimized window. Should see tablespace on primary and physical standby databases.
2. First we shall set up the +ASM4 instance on nusclust160## and add it to the cluster.
On nusclust160##
cd $ORACLE_HOME/dbs
vi init+ASM4.ora
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cluster Database
cluster_database=true
cluster_database_instances=6
# Miscellaneous
diagnostic_dest=/apps/dbs/oracle
instance_type=asm
# Pools
large_pool_size=12M
asm_diskgroups='DATA1','ARCH','REDO1','REDO2'
asm_diskstring='/raw/asm'
+ASM1.instance_number=1
+ASM2.instance_number=2
+ASM3.instance_number=3
+ASM4.instance_number=4
3.
On nusclust16007
cd $ORACLE_HOME/dbs
sftp nusclust160##
put orapw+ASM1 /apps/dbs/oracle/product/11.1.0/db_1/dbs
put orapwORADB1 /apps/dbs/oracle/product/11.1.0/db_1/dbs
4.
On nusclust160##
cd $ORACLE_HOME/dbs
cp orapw+ASM1 orapw+ASM4
cp orapwORADB1 orapwORADB4
5.
On nusclust160##
cd $HOME
. ./.asm
sqlplus '/ as sysasm'
startup
create spfile from pfile='/apps/dbs/oracle/product/11.1.0/db_1/dbs/init+ASM4.ora' ;
shutdown immediate ;
startup
show parameters spfile
6. Now that we have a running asm instance add it the cluster.
On nusclust160##
srvctl add asm -n nusclust160## -i +ASM4 -o /apps/dbs/oracle/product/11.1.0/db_1
srvctl enable asm -n nusclust160## -i +ASM4
7. Now that we have an asm instance let's set up a database instance.
On nusclust16007/ORADB1 :
alter system set cluster_database_instances=6 scope=spfile ;
alter system set instance_name=ORADB4 scope=spfile sid='ORADB4' ;
alter system set instance_number=4 scope=spfile sid='ORADB4' ;
alter system set local_listener=LISTENER_ NUSCLUST160## scope=both sid='ORADB4' ;
alter system set thread=4 scope=both sid='ORADB4' ;
alter system set undo_tablespace=UNDOTBS4 scope=both sid='ORADB4' ;
alter database add logfile thread 4 group 28 ('+REDO1', '+REDO2' ) size 100M ;
alter database add logfile thread 4 group 29 ('+REDO1', '+REDO2' ) size 100M ;
alter database add logfile thread 4 group 30 ('+REDO1', '+REDO2' ) size 100M ;
alter database add logfile thread 4 group 31 ('+REDO1', '+REDO2' ) size 100M ;
alter database enable public thread 4;
Need to add 5 groups to support standby
So at the end of the day 900M will be added to REDO1(29,577M free) and 900M will be added to REDO2 (29,577M free).
8. Set up init.ora, listener.ora, and tnsnames.ora for ORADB4 on nusclust160##.
a. init.ora set up
cd $ORACLE_HOME/dbs
vi initORADB4.ora
SPFILE='+DATA1/ORADB/spfileORADB.ora'
b. add entries to tnsnames.ora:
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
ORADB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16007-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16008-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16036-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
LISTENERS_ORADB =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16007-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16008-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16036-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
LISTENER_NUSCLUST160## =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
ORADB_PRIM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16007-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16008-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16036-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
c. add entries to listener.ora, The entries for most of this file should be set already, just insure modifications that need to be made are made.
SID_LIST_LISTENER_NUSCLUST160## =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps/dbs/oracle/product/11.1.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORADB)
(ORACLE_HOME = /apps/dbs/oracle/product/11.1.0/db_1)
(SID_NAME = ORADB4)
LISTENER_NUSCLUST160## =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = NUSCLUST160##-vip)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = 222.65.125.###)(PORT = 1521)(IP = FIRST))
9. Reload the listener.
lsnrclt
set current_listener LISTENER_NUSCLUST160##
reload
exit
10. Check audit trail, add instance to cluster, and start db instance.
a.
Check for audit directory and start the instance.
/apps/dbs/oracle/product/11.1.0/db_1/rdbms/audit
If this audit trail directory does not exist then create it.
b.
srvctl add instance -d ORADB -i ORADB4 -n nusclust160##
srvctl modify instance -d ORADB -i ORADB4 -s +ASM4
srvctl enable instance -d ORADB -i ORADB4
Will probably show: PRKP-1017 : Instance ORADB4 already enabled.
c.
sqlplus '/ as sysdba'
startup
**Because the cluster_database_instances parameter requires the complete shutdown of all instances in the cluster, you might have an issue when it attempts to start the instance. If you receive an error then run:
srvctl stop database -d oradb
sqlplus '/ as sysdba'
startup
shutdown
srvctl start database -d oradb
shutdown
srvctl start instance -d ORADB -i ORADB4 -o open
11.
Modify spfile of ASM1, ASM2, +ASM3
On nusclust16007
. ./.asm
sqlplus '/ as sysasm'
alter system set instance_number=4 scope=spfile sid='+ASM4' ;
On nusclust16008
. ./.asm
sqlplus '/ as sysasm'
alter system set instance_number=4 scope=spfile sid='+ASM4' ;
On nusclust16036
. ./.asm
sqlplus '/ as sysasm'
alter system set instance_number=4 scope=spfile sid='+ASM4' ;
b Modify tnsnames.ora on nusclust nusclust16007, nusclust16008, and nusclust16036
On nusclust16007
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
Add the following line to the ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the LISTENERS_ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the ORADB_PRIM alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
On nusclust16008
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
Add the following line to the ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the LISTENERS_ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the ORADB_PRIM alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
On nusclust16036
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
Add the following line to the ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the LISTENERS_ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the ORADB_PRIM alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
c Add standby logs on primary to support 4th node.
alter database add standby logfile thread 4 group 32 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 33 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 34 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 35 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 36 ('+REDO1', '+REDO2' ) size 100M ;
12.
Test the cluster to make sure everything is set up correctly.
a. Shutdown resources.
On nusclust16007:
emctl stop dbconsole
ps -ef | grep perl
ps -ef | grep agent
ps -ef | grep java
On nusclust16008:
emctl stop dbconsole
On nusclust16036:
emctl stop dbconsole
On nusclust16008:
cd $HOME
. ./.rman
cd scripts
./go
shutdown immediate
cd $HOME
. ./.bash_profile
srvctl stop database -d oradb
crs_stop -all
crs_stat -t
b. Startup resources
On nusclust16007:
cd $HOME
. ./.bash_profile
crs_start -all
crs_stat -t
The command above should show everything up and running.
ocrcheck
On nusclust16008:
cd $HOME
. ./.rman
cd scripts
./go
startup
On nusclust16007:
emctl start dbconsole
On nusclust16008:
emctl start dbconsole
On nusclust16036:
emctl start dbconsole
How does that work for you?
-JR jr

Alter database clear unarchived logfile group... who, what?

I am the sole DBA for our site, all of them running RHEL 5, Oracle 11.2.0.3.
I recently (within the last hour), received a text message from one of our databases that poll the alert.log...
ORA-1031 signalled during: ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3
Unfortunately, the 'audit database' was not enabled (it is now!), and the trace file generated did not contain anything of use.
I know someone has been loading data since 1:30pm up until near the time I received this text, and I'm wondering if he is mucking in the system, or if this command can somehow be generated automatically by Oracle. If so, I certainly wouldn't expect an ORA-1031insufficient permissions error....
I checked my v$log, v$logfile, and did a log switch just to check if any possibility of redo log corruption, but all looks fine.
Has anyone else ever had random Oracle errors like this?....

Hi,
That's someone manually doing something when they really don't know what they are doing. I've only had to run that command once in 16 years as a dba. Oracle wouldn't ever run that itself.
Cheers,
Harry

Can't see calander group's or add a new group in ical 5.0 (lion)

Help.
Can't add a new group or see my groups when i click on calander in Lion version of ical. Any idea's why?
Thanks

Info taken from other discussion threads on Win not recognizing iPhone:
NOT SEEN IN ITUNES:
Windows 7 uses a MTP driver instead of the USBAAPL by default, and what you need is an 'Apple Mobile Device USB Driver' which you might not have in 'Universal Serial Bus Controllers' (check it and see).
Update the driver by expanding 'Portable Devices' from the list, right click Apple iPhone/iPhone and select 'Update Driver Software'. Then select 'Browse My computer...'
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers - then hit 'Next'.
NOT SEEN AS CAMERA:
Open Device Manager: Right click on My Computer and select Properties from the drop down menu. This will open System Properties as shown below. System Properties opens on the General tab so you will need to click on the Hardware tab.
Remove iPhone USB Driver: called Apple Mobile Device USB Driver. We want to remove this driver by expanding the list of USB drivers which can be done by clicking the + next to Universal Serial Bus controllers. Now right click on Apple Mobile Device USB Driver and select Uninstall from the drop down menu. A confirmation will require you confirm you want to remove the iPhone USB driver.Click the OK button on the pop up confirmation window which will remove the driver.
Reinstall iPhone Driver: Once the driver has been removed you should unplug the iPhone from the USB cable. To reinstall the iPhone USB driver plug it back into the USB cable and the reinstalling of the driver will start automatically. There will be numerous pop up messages displayed near the system clock in the lower right corner of your Windows desktop. Once you see the pop up message confirming that your new device is ready to use everything should be working properly again.
Verify iPhone Camera Detected: Open My Computer now to verify that the iPhone is displayed and you can click on it as you previously were able to do.

Can't add a new group

When I try to add a new group as per instructions, AB fails to add that group. No error messages, nothing. It does not add the group even if I delete a few old ones. Can anyone help?
Bruce

Hmmm...I don't know....I wonder whether this could be a file permissions or ownership problem?
In Terminal.app, when you type
ls -alTk Library/Application\ Support/AddressBook
what do you get? When I type that, I get:
drwxrw-rw- 12 jv user 408 Aug 30 09:23:46 2006 .
drwx------ 12 jv user 408 Aug 29 21:11:26 2006 ..
-rw-rw-rw- 1 jv user 6148 Aug 5 22:56:55 2005 .DS_Store
-rw------- 1 jv user 10 Aug 30 09:23:46 2006 .database.lockN
-rw------- 1 jv user 10 Aug 29 18:26:44 2006 .skIndex.ABPerson.lockN
-rw------- 1 jv user 10 Sep 4 11:58:13 2005 .skIndex.ABSubscribedPerson.lockN
-rw------- 1 jv user 147456 Aug 21 22:36:20 2005 ABPerson.index
-rw------- 1 jv user 139264 Aug 29 18:26:44 2006 ABPerson.skIndexInverted
-rw------- 1 jv user 6144 Sep 4 11:58:13 2005 ABSubscribedPerson.skIndexInverted
-rw------- 1 jv user 942735 Aug 30 09:08:48 2006 AddressBook.data
-rw------- 1 jv user 139361 Aug 17 18:19:33 2006 AddressBook.data.previous
-rw-r--r-- 1 jv user 92 Aug 28 20:12:42 2006 LastImport.plist
Are you seeing similar permissions ("-rw-------", etc.) on all your corresponding files of the same names (AddressBook.data, etc.)? Are they showing the same owner and group as the top two "." and ".." entries (in my case, jv and user -- will be different for you)?

Add User to Group Behavior

Hi all
I found
this post that explains the same issue I'm having, but the marked answer isn't relevant to my environment. I've built a user creation runbook, using 2012 R2 and this
Active Directory Integration Pack. Everything works properly, except I'm getting strange security log events when using the Add User to Group activity.
In one of the tests, I added a single user that was being created to about 100 different groups. Let's say one group has 50 members. When the user gets added to that group, the security audit shows that 50 users were removed from the group, and then those
50 users were added back plus my new user. It shows this activity for every group that the user was added to. I get the following two actions for every member of the group:
Member '-' was removed from 'Domain\Group' by 'Domain\User' on...
Member 'DN of Member' was added to 'Domain\Group'...
This is a problem because it makes our audit reports and notifications worthless since we'd have to read through all the noise to see an actual anomaly. I'm also concerned that if users are actually being removed and re-added to those groups, that there
could be some consequences of that that we aren't seeing yet (i.e. application access interruptions, or what if the connection to AD is lost after removing the users but before adding them back in). Although I should say I'm not convinced that the users are
actually being removed because as you can see above, no member information is recorded on the removal, and all the removals and additions have the same exact time stamp meaning they occurred within 1 second, which seems pretty fast given that some of our groups
are large.
Is this the intended behavior of the Add User to Group activity? If so, is there a workaround I can use to avoid this behavior? The next thing I'll try is using PowerShell to add the user to the group, but this option isn't ideal since the runbook will be
managed by users who are not that familiar with scripting, so I'd like the solution to contain as little as possible.
Thanks

Hi,
the issue of the AD IP 7.0 is reported here
http://social.technet.microsoft.com/Forums/de-DE/eef9cdda-774f-4b95-bd89-aa3f86feee9b/ad-integration-pack-add-user-to-group-activity-problem?forum=scoscip
Try the up-to-date Version 7.2
http://www.sc-orchestrator.eu/index.php/scoblog/115-updated-system-center-2012-r2-orchestrator-integration-packs-available
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Redo log add and new group

Hi,
I have problem with one of the redo log file i issued the ALTER DATABASE CLEAR LOGFILE GROUP 3; command. the status right now is clearing since last some hours.
Can i create new redo log and assign to group 3. will the status will be inactive or active? how to add redo log and group please explain!
Thanks

user12020966 wrote:
Hi,
I have problem with one of the redo log file i issued the ALTER DATABASE CLEAR LOGFILE GROUP 3; command. the status right now is clearing since last some hours.
Can i create new redo log and assign to group 3. will the status will be inactive or active? how to add redo log and group please explain!
Thanksafer you create redo log group it wil be inactive because nothing has been written to it after you apply alter system switch file the new group will start to write the redo record and it status will be active but if the circule in group 3

I missed to add Standby Logfile groups? What now?

Similar Messages

Maybe you are looking for