I moved a completed dvd file. now cannot open it to make more copies

I moved my competed files (dvd made with premier 9) and now want to open it, but it will not open. Even though I moved it back to the pc hard drive, it loads the clips, but with a red screen saying something about no media???

Ken
Thanks for the reply.
Was there a problem attaching a screenshot to your post 4 since your message included
This is what my files look like when I open the premiere program.
and I did not see an expected screenshot.
Premiere Elements project files (project.prel) have been known to failed to open for a variety of reasons, one being that the source media that went into them was moved, deleted, or renamed after the save/close of the project file (project.prel). In some cases, one of these media disconnected project.prel files may open but greet you with "Where is the file.....?" messages which you use for the reconnect. You may want to check out the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
How did you do with the mini test troubleshooting that I suggested in the prior post
Do you have all the source media that went into the project? If so, move it to a hard drive save location. Remember where everything has been placed.
Open Premiere Elements project to be greeted by the "Where is the file.....?" messages (one after another). Indivdually use a message to browse to the file that the program it looking for and select it to reconnect the missing media. Repeat that for all the "Where is the file....?" messages.
Have you actually tried to open any of the older projects that you have treated in the same manner as this current one?
Just moving the saved closed project.prel file (project file) or even renaming it on the hard drive after the save close should not be creating problems with opening that saved/closed project. That is why I am focusing on your workflow and media disconnect. How are you trying to open the saved/closed project that will not open? If you start a new project and save/close/reopen it immediately without any relocation of the project file, does the saved/closed project re-open?
We will be watching for that screenshot to determine if we can spot important information in it to direct us in the troubleshooting.
Please review and consider.
Thank you.
ATR

Similar Messages

  • I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
    The DNG Converter can be found, here:
    http://www.adobe.com/downloads/updates.html

  • Installing OSX Lion has killed Macromedia (Adobe) Freehand 11. I now cannot open valuable files for publications, some 'underway'. Apparently because Apple, in their wisdom, have decided to no longer support 'Power PC' software. Any solutions?

    Installing Mac OSX Lion has killed Macromedia (Adobe) Freehand 11 – which is otherwise perfectly viable, current graphics software (originally designed for Mac, I thought). I now cannot open valuable files used to create figures for publications, and work 'underway' is dead in the water. Apparently Apple, in their wisdom, have decided to no longer support 'Power PC' software. Any solutions? Work arounds?

    Manonabike wrote:
    Good point/question (Does Lion have some function I need/want?). It seems, from the blurb, that the move to iCloud requires, or will be best supported by, Lion. Certainly they're saying that iOS5 on iPhone will be needed, and it's implied that iOS5 and Lion are designed for compatibility. So yes, perhaps, not sure.
    At this exact moment in time, yes, Lion is required. There are "rumors" of a 10.6.9 SL release for iCloud, but that type of discussion is not allowed here, so I won't discuss it.
    However, your idea, and from the other replies, to run SL on another partition – yes I did backup before installing Lion – sounds like a way forward. I'll try it – thanks!
    I do think that's the best plan at present. You're welcome, and good luck.

  • How do I change my iPad/iPhone to new region. Moved from Australia to HK now cannot use App store. Any ideas?

    How do I change my iPad/iPhone to new region? Moved from Australia to HK now cannot use App store. Have changed regional settings on both. Any ideas?

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311
    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies.  How do I reverse this?

    Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies.  How do I reverse this?

    Paragraphs help the reader, just saying.
    What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
    Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
    It makes no difference at all.
    How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
    You can export while writing the metadata to the file in most cases.
    Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size. 
    HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
    I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
    Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
    You're somewhat confused and you need to
    1. Decide what exactly you want to do
    2. Then go about it.
    If I understand you correctly - and there's no guarantee that I do -  the easiest thing is to bring all your Photos into iPhoto and do everything from there.
    You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
    Regards
    TD

  • I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing  . . . .Acrord32.exe application error . . . . I now cannot open any PDF's. Adobe seems to be unresponsive.

    I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing  . . . .Acrord32.exe
    I now cannot open any PDF's and Adobe seems unresponsive. I have tried to follow a step by step guide on how to fix this but Adobe won't stay open long enough for me to complete the steps. When I open Adobe it stays open for a matter of seconds then minimises to the task bar and when I click on it again I can't do anything with it and have to close it via task manager
    Please help!?

    Disabling Protected Mode should fix the problem.  But since you cannot even open Adobe Reader by itself, you need to do it via the Windows registry.  If you tell me your installed Reader version, I can give you a registry script to do that.

  • I recently updated to the OSX 10.8.3 Operating Sistem.  I am writing a book and now cannot open any word document I've created.  Could not find a newer version of the Microsoft Word Processing Program.  Is Pages the next thing? Can I recover my documents?

    I recently updated to the OSX 10.8.3 Operating Sistem.  I am writing a book and now cannot open any word document I've created with the old system.  Could not find a newer version of the Microsoft Word Processing Program.  Is Pages the next thing? Can I recover my documents?  How?

    I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.  
    So all the helpful hints to use the latest version of Office Mac are to no avail. Now what?

  • Upgraded by Mac Pro to Yosemite 10.10.1. Upgraded iPhoto to 9.6 now cannot open iPhoto.

    I have a Mac Pro running Yosemite 10.10.1.  I upgraded iPhoto to 9.6 and now cannot open iPhoto. I tried several times but have to force quit.  I used the time machine to go back to before the upgrade but the iPhoto copy is just the same - blank screen with the little worm continually turning.
    I do not know where to start

    Do you have a backup you can restore the pictures from?
    Try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - About
    Safe Mode - Yosemite

  • I was prompted to download the new version of Adobe Reader XI 10.0.03. I now cannot open it

    I was prompted to download the new version of Adobe Reader XI 10.0.03. I now cannot open any document. I have never had trouble before. It gives me an error message: “Adobe Reader cannot open in protected mode due to an incompatability with your system configuration.  Would you like to open Adobe reader with protected mode disabled.” I tried a number of things including clicking on the first and last options the prompt gives.  Help!

    Three things to try...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • .prproj file Error, Cannot Open

    please download in:
    http://rapidshare.com/files/333062084/part6.rar.html
    Please help me to recover corrupted .PrPROJ files? All My .prproj files was corrupted at once since i try to Export the movie, but export movie always failed, It Says "Error Compiling Movie"
    now, i never can open my project, it always Froze/Hang when loading on 90%, it show Message "Sorry, a serious error has that requires Adobe Premiere Pro to shut down. We will attempt to save your current project."
    I use Adobe Premiere Pro CS3, and i ever try to change the source file folder for trick Adobe Premiere,but still not working too.
    .... I dont have back up .prproj files, the autosave .prproj file also cannot open too
    i also ever re install Adobe Premiere, but i still cannot open my Project.
    Please help me. I have big project, 80 minutes video. I can get fired if i cannt finish this video
    thanks,
    Benny

    Opened fine for me here.
    Try the following, one at a time:
    - Start Premier while holding down "shift" (resets plugin cache)
    - Create a new project and import the old project into it
    - Try opening the project with all the media offline (by shifting it/renaming the folder it's in) and bringing each piece back online one at a time
    - Move the three folders Premiere makes next to the project folder to somewhere different (so premiere can't "see" them)
    Let us know if any of that worked.
    Matthew

  • Upgraded from X to XI but now cannot open PDF.

    Have upgraded per email notification from X to XI but now cannot open PDF.  Opens with Adobe screen with blank grey background for about 3 seconds then disappears.  Uninstalled both macafee (accidentally installed at same time) and XI, reinstalled as X (without macafee) which was fine prior to XI installation but still same result.  Using windows 7 and Norton protection on Toshiba QOSMIO laptrop about 9 months old.  Not technically savvy on computers,  Any help please?
    sir warwick  

    Things to try...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • I have just updated pages app, but now cannot open the app.?

    I have just updated the pages app but now cannot open the pages app

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

    I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

    If it's because you were using Office 2004, the eight year old version of Office that was written when Intel processors were not used in Macs, then there will be no fix. Lion dropped support for PowerPC applications, as has been widely reported since Lion's release last August.
    You can upgrade Office 2004 to Office 2008 or Office 2011. You can use iWorks 2009 that can open Microsoft files. You can use a number of free applications that are also capable of working with Microsoft documents. You can go back to Snow Leopard, if you have a backup. Or, if you have an external drive or room to add a partition to your current drive, you can install Snow Leopard on it.
    Search these forums for more information. If this is your issue, it's been posted and answered several times a day since August 2011.

  • I downloaded newest version of Numbers as prompted, but now cannot open old work

    I downloaded newest version of Numbers, as prompted, but now cannot open old work.
    When I try to, the message is that I need to download new version.
    Because I help run a small business, I have found a work around, for now, with old template, so we can still keep billing (very important)
    but I just realized that when printing a saved pdf format copy of an invoice, completed after the
    update, the color logo is not printing even though it appears to be there.
    I guess this is two problems.
    I have a Mac OSX version 10.9.4 and downloaded, I thought, Numbers 3.2.2 (but did not pay for app)
    thanks,

    Margarita,
    You should still have the previous version of Numbers and may continue to use it.
    The previous version is located in the folder "/Applications/iWork '09"
    You can tell the difference between the two versions by noting  the icon:
         Numbers 2.3                    Number 3.2
         3 bars                              4 bars
    I keep both in my dock so that I know which one I am launching

  • I downloaded the update Adobe Reader IX and now cannot open PDF attachments on incoming emails. Why?

    I downloaded the update Adobe Reader IX and now cannot open incoming PDF attachments  It says "EULA display has stopped working"

    Go to: C/Program Files (or Program Files(x86))/Adobe/Reader 11.0/Reader
    Look for the file named "eula.exe" (or just "eula")
    Double click it and accept the end user license agreement (eula)
    You should not see this error anymore

Maybe you are looking for

  • IPhone remote app won't connect to my iTunes library

    -Already seen this question, but for older versions and slightly different problems, so I'm asking it again, sorry -running IOS 10.0.2 on iPhone 5, Mac OSX 10.6.8 -iTunes recognises my device but the option to type the 4 digit code doesn't come up, w

  • Loops wont work...

    After loading a wav file to create a loop, Soundbooth won't allow me te define a duration ( for instance 2 minutes) to te made selection. After defining start- end point the duration feature is greyed out...Anyone? All other "looping"selectors are de

  • Trouble printing from 10.6 to shared canon on 10.5 iMac

    Hi, I have 2 Canon printers attached to a G4 iMac running 10.5. A PIXMA Pro9000 MKII and a PIXMA ip4700. Both printers are shared and we print to them using 2 MBP's. Everything went very smooth when all the machines were on the same OS. But since we

  • Cut/copy and paste on the iPad I get extra text

    When I cut/copy and paste on the iPad I get extra text symbols like "%". Is there a way to just copy the text without the extra stuff? If I copy from Safari and paste into an email I have to go and erase all the extra text.

  • I need to reboot my laptop

    How can I find free reboot information for my laptop