I moved a mach kernel and now I can't start OS X

I remember moving a mach kernal last night. I didn't know what it was then, BUT I DO NOW!
-My PB will not start up past the grey (w/ Apple) screen.
-I have reinstalled the Os X CD
-I have performed everything the support stuff says to do and nothing will make it go past that grey screen.
Any insight out there?!?!?!?!?

If you have access to another Mac you can:
1. Connect the two via Firewire cable.
2. Boot your PB into Target Disk Mode (restart the computer and after the chime press and hold down the "T" key until the TDM screen appears.)
3. Boot the other computer normally. Your PB's hard drive should appear on the other computer's Desktop.
You can then find the file you moved and return it to where it belongs.
Or you can do an Archive and Install. Before doing an Archive and Install you should repair the hard drive using Disk Utility after you boot from the OS X Installer disc.

Similar Messages

  • I moved the project files and now I can't get them back into iMovie 11

    I was working on a project but I ran out of disk space before I could finish it. Now, for this very purpose, I have an external hard drive with plenty of space on it. So I tried moving the folder with all my project files onto the external hd, and now iMovie can't find my project anymore. With iMovie '06 it was as simple as hitting "save as" and saving the project to the external hd, but I guess that's not complicated enough for the new version. Now I can't get into my project. I even try clicking on the actual project file, and it goes to iMovie as if the project was about to open, but nothing happens. So I fear I wasted a lot of time working on that project only to have to start all over because I ran out of disk space.
    Someone please tell me there's a way to get the project files open again. Thanks

    enoughsaid3 wrote:
    ... my external disk isn't formatted as Mac OS extended (journaled). I don't know how to do this,...
    that is a simple one and should be a routine after purchasing a new drive (in a Mac-only environment!):
    • on your Mac, Apps/Utilities you'll find Disk 'Utility'
    • on the left lane, you'll notice your connected hard drive(s)
    • select it, click on the 'erase' tab
    • NOTE: FORMATTING A DRIVE MEANS ERASING ALL CONTENT ON THAT DRIVE!
    that's why you should do it as step#1 after purchasing a new drive
    done ...-

  • We had a power cut this morning and now I can't start my Apple Mac?  CAn someone please help?

    We had a power cut this morning.  Now I can't start my Apple Mac Snow Leopard.  It is completely dead.  Can someone help please?

    Take a look at this link, http://support.apple.com/kb/TS1367

  • I moved my iTunes folder and now I can't make iTunes find it again.

    I moved my entire iTunes folder from \\dc1\JEly$\MyMusic\iTunes\iTunesMusic to C:\Documents and Settings\John Ely\My Documents\My Music\iTunes .
    I did this to try to make MediaSync for Blackberry work. (Which has been a major headache.)
    But now iTunes can't find any of my music, even when I go to Preferences and change the directory where the music is located. What else do I need to do? It is the latest iTunes.
    Thanks.

    That is not the correct way to move anything (as you have discovered).
    Move everything back the way it was.
    iTunes prefs -> Advanced and set the location where you want the music to go to.
    Then iTunes menu File -> Library -> Organize -> Consolidate.
    This will copy everyting in iTunes to teh new location and use that location from now on.

  • Updated osx and flash storage for macbook air and now i can't start up

    I updated my macbook air, and now when it restarts I get a circle with a line through it, then the apple, then the screen turns blue, and then it takes me right to the disk utility.  It wont boot my desktop.  Help!

    You say you updated the flash storage.  I'm guessing you just recently had it replaced by an Authorized Apple Service Center, perhaps as part of the replacement program.
    If that's true, take it back to the Authorized Apple Service Center and have them fix it so the new flash drive boots for you.  They should have done that originally.

  • I updated my Mac osx to the 10.4.7 combo and now I can not start my ibook G

    I updated my mac osx to the new 10.4.7 combo and now my ibook will not restart it goes to the spinning wheel under the apple and stays there and later powers off. I tried going in in single user mode and running fsck because I dont have the utility disk but the reponse i got was- Invalid sibling link (4, 2362) **Volume check failed and a many Incorrect block count for file_____I dont know what else to do please help me.

    Ok thanks I will get the 10.4.6 tomorrow but do I definatley need one of the others they are 100$? Will reinstalling do the trick, maybe.
    I did use my mac while it was updating, im zero at this and it did not warn me and I always use my mac while i downloading things. I also had my isight plugged in maybe that was not good as well.
    Never even thought I had to repair the drive before updating. now i know and knowing is half the battle.
    Do you mean I should back up now with a firewire drive or I should have done so before updating? I tried to access my hard drive through firewire with my sisters ibook but had no luck I followed the direction on the apple pages but I dont know why I couldnt get it.
    What is an erase w/ zero-all 7-way write? Im sorry like I said im zero at this.

  • I've moved my music folder and now iTunes can't "find" my music

    I recently moved my iTunes folder of music (46 gigs) from an external drive back to my iMac's internal drive. The music files are all on my iMac now (in the music folder), and I've changed the preferences in order to map iTunes to the new location. But when I attempt to play most of the songs, iTunes will give me a message saying the song could not be found, and I have to manually locate each song in order for iTunes to play it.
    There seems to be no commonality to the problem either. For the "compilation" albums, I can kinda understand why I would have to do this. But I'm having to do it for single songs, full and partial albums, and even iTunes-purchased songs.
    1) Why is this happening?
    2) Is there a way to batch-process this requirement to map ALL the songs for iTunes so I don't have to do it for every other song file in my 46-gig folder?
    3) Once I finally do "find" all the files for iTunes, will I face the same problem when I move my music back to another external drive in the future?
    Thanks in advance for any advice.

    I see. For your future benefit, here is the "canned" response I usually post for people trying to move their library to an external drive...
    Assuming you use the iTunes default settings where iTunes copied added items to your iTunes folder and organizes your library (meaning - everything is all self contained in the iTunes folder), then all you have to do is drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
    If you want to test that it worked or would like to actually start using it from that location instead, use these instructions when you start iTunes to point it to the new location...
    How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/HT1589
    If you are just testing to make sure a backup copy works and still want to use the internal location, then close iTunes after you verify it works, and restart iTunes again with the same instructions and point it back to your internal drive (original) location. Otherwise you are all set to use the library from the external location.
    Additional info...
    Back up your iTunes library by copying to an external hard drive
    http://docs.info.apple.com/article.html?artnum=307074
    Cheers,
    Patrick

  • I moved to different country and now I can't use iTunes

    I'm from Canada and my account was registered in Canada with a Canadian credit card. Now I'm living between Slovakia and Spain and iTunes won't let me buy/download anything. I understand that it would be a licensing issue if I were to buy things from the Canadian site while in a different country.
    However I don't understand why iTunes won't let me buy things from the Slovak or Spanish iTunes site while I'm in either country but not using a credit card from that respective country. Every other site and store has never had a problem with this and it seems pretty self-defeating to continue with this policy. Is there a fix for this? Alternatively, does anybody know if iTunes has plans to address this issue? I've found surprisingly little online.

    Canavakian wrote:
    Every other site and store has never had a problem with this
    Then why not buy your content from the stores that will sell it to you? You can buy MP3s from any online music download store and add them to your iTunes library.
    does anybody know if iTunes has plans to address this issue?
    No announcement has been made.

  • Delayed Write Failed - and now it can't start Windows

    Help!
    I'm in big trouble! I was using my Tecra 9100 (running XP Service Pack 2) and was looking at some of the files I had stored on my memory stick. I selected 'safely remove hardware' and pulled my memory stick out when I was finished. All of a sudden my laptop starts to run slowly and an error message popped up saying 'Delayed Write Failed'.
    This is a first for me, and I don't know why this popped up. I read what it had to say below the error - 'Windows was unable to save all the data for the file \Kaspersky (can't remember the exact name but it was to do with Kaspersky). The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.'
    My laptop became so slow it was unresponsive (although I could move the cursor around) and remained so for 10mins. I tryed Ctrl-Alt-Del, nothing happened. As I could't shutdown Windows, I was forced to hold the power off button for a few seconds to immediately switch it off. Upon switching my laptop back on, I noticed my bootscreen took about 15sec more than before and the blue screen showed up saying 'Windows needs to check your disk for constincency.'
    An hour or so later I logged back into my computer and noticed my cursor was rather jumpy and not as smoothe as before. It just wasn't right and about an hour or so later the same error popped up again and my laptop froze. After another power off, the blue screen showed up again saying 'Windows needs to check your disk for constincency' and this time I waited around 4 hours!
    When it was finally done, my laptop restarted automatically and the blue screen showed up again! This time cancelled the disk check and when straigh to the log in screen. I logged in and noticed the laptop wasn't up to speed as it was usually with the mouse being jumpy still. I decided to restart the laptop only to see the blue screen again.
    I let it go this time and just waited for it to scan. after about 20mins nothing appeared to be happening in the scan so I powered off. Now my computer is seriuosly messed up. When I switched it back on the screen which says Last know good configuration and start windows normally showed up.
    Now no matter what I select my laptop just restarts and says cannot proceed due to corrupt or damaged file in \Windows\System. You can attempt to repair this problem by inserting the Windows set-up disk.' Whats the Windows set-up disk?
    My laptop is second hand and came with no recovery disks ect. and has XP Pro already installed so i dont have disk. what on earth shall i do?
    help will be very appreiciated. thanx.

    Sounds like a mean software crash to me. I understand you need to rescue your data before you delete all your files and proceed with a recovery.
    What I would do in your situation (did it actually some days ago on a friend's notebook), is:
    1) remove the hard drive from my laptop (it's not that hard to do it yourself)
    2) purchase an empty external housing for a 2.5" drive to USB (about 10 US$)
    3) Install the removed drive into that new housing
    4) Backup all my important data at my Office/Friends Computer through the new adapter (you have access to all data areas of the hard disk through USB). Keep the HDD even leveled during this procedure as it might be a damaged drive due to wear and tear of the motor bearing... In such incidents you can hear a changing noise while altering the level of the drive during operation. Maybe you have to keep it in a vertical position to minimize the noises during the final rescue process of your data.
    Finally once everything is restored, I would:
    5) reinstall the Drive back into the notebook (in order to test its functionality) and do a proper recovery-CD installation.
    6) Purchase a new spare drive and have it ready, just in case the old drive reveals as broken.
    This is the easiest and most safe way to rescue your data.
    You might ask yourself: What caused this to my notebook:
    Here are some possible reasons:
    - a Virus/malware/incompatible program (30 % chance)
    - a broken hard disk (does it sound strange (noisy) lately?) (45 % chance)
    - a HDD controller/motherboard problem (10 % chance)
    - bad moment like an instant power loss or another undefined reason (15 % chance)
    Good luck,
    electroch@in
    BTW, my friend was very happy to have his broken 60GB Toshiba drive replaced with a new more silent 120GB Samsung drive.

  • I bought an audiobook the other day via itunes on my phone. Synced my phone to laptop itunes (first time) and now I can't start the audiobook. It is there but won't play!

    Any ideas?

    From King_Penguin in response to an earlier query on this topic:
    You should be able to copy it over by connecting your phone to your computer's iTunes and doing File > Devices > Transfer Purchases - it should copy over to the Books part of your library
    Cheers,
    GB

  • I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    Did you try to change the location  in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

  • I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

    I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

    Hopefully you moved the entire iTunes Media (or iTunes Music) folder to a new path on your external drive. Copy your iTunes library folder out to the root of the external drive, e.g. X:\iTunes (where X: is your external drive), then move the media folder inside it. Hold down shift as you start iTUnes and keep holding untila asked to choose or create a library. Choose the library at X:\iTunes\iTunes Library.itl. Should all be good.
    Failing that, download and run my FindTracks script and point it at the new location of your media folder.
    tt2

  • I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

    I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
    I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
    Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

    Sandra,
    See this Apple support document for information on reporting an issue with your iTunes purchase.
    http://support.apple.com/kb/HT1933
    B-rock

  • Moved to a new house and now i can't send emails but i can receive them

    I just moved to a new house and now i can not send emails but i can receive them...

    New houses can do that. 
    We need more info - what email service is this issue about.  Do you use several (gmail, yahoo, icloud,...) and is this issue the same for all?  If you also use a computer or other device, is this issue common to them all?

  • Just moved to ISP PLUSNET and now loading web pages is dead slow

    Just moved to ISP PLUSNET and now loading web pages is dead slow.
    Like loading google will sometimes take 30 seconds to 1 minute but it used to load in a fraction of a second on my previous ISP.
    Sometimes a new URL will take over a minute so I hit Stop Loading This Page and then try again and sometimes it might load instantly, or if not, it might continue to just drag on again.
    It's so frustrating it's like being back on dial-up connection - but worse.
    It feels like PLUSNET have put something on my Mac to slow it down.
    PLUSNET has a restriction on how much I can use per month, which my previous ISP did not have, but according to PLUSNET's usage checker I am nowhere near the max, ie, I am allowed 10GB per month but the checker is showing I have used less than 100 MB so far this month.
    I wonder if the PLUSNET usage checker is slowing down my usage coz it's really noticeable that it has only started to run slow since I moved to PLUSNET.
    When I run a broadband speed check it always shows the feed coming in at around 5500 kbps or so which should be OK.
    PLUSNET told me to go through their test page and I got to the part where it says install a Virus checker and an Adware checker but I'm not sure which ones to use coz I heard some of those checkers are themselves plants that infect you with a virus or keystroke logger.
    Also I have Block Pop UP Windows running on Safari but yesterday a window popped up so that blocker seems to have been compromised somehow.
    I have 17GB available on my HD of a total of 38GB.
    Can anyone help me with this problem please?

    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
    Adding DNS codes to your Network Settings, should gives good results in terms of speed-up:
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
    208.67.222.222
    208.67.220.220
    (An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS
    Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
    This is Apple's guidance on iPv6:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.
    If that didn't do it, then try this as well:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.
    More useful information here:
    http://guides.macrumors.com/SpeedupSafari
    Less likely, but possible, is that the slowness is caused by a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
    If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
    This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
    http://www.versiontracker.com/dyn/moreinfo/macosx/33696
    Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network.

Maybe you are looking for

  • K7n2delta-ilsr vs ms-8929-TD8X

    is there a fix yet for the ti-5900 8xagp to work on the k7n2 delta? i havent been on here lately to see.

  • Toneport UX2 not working with new MacBook Pro 10.6.2 Snow Leopard

    I do some casual recording using a Line 6 Toneport UX2. Previously i was recording on an older Mac Mini. Recently i upgraded to a new Macbook Pro (Snow Leopard 10.6.2) The new Macbook is not responding at all when i plug in my toneport, all the softw

  • How to Write a file from hex format to another format

    hi I am trying to create a file (IBM AFP-printer format) from the hex file which i have created after reading that IBM afp file. Now i have to do some changes in that hex file data and store it back to the same format. I have tryed storing it using:

  • Load jar file into Oracle db 10.1.0.2.0.

    Hi, I am trying to create a Java Stored procedure that is dependent on some other classes. The java source doesn't compile since it cannot find the imported libs. How can I load jar files into the database so I can get my java source to compile? I ha

  • Any and all color used is gray

    I'm a digital scrapbooker.  AT my wits end,  any and all color I use in Photoshop Elements 12 is grey!  Any photo I drag from the photo bin turns grey scale.  I have uninstalled the program, and reset the preferences.   Please HELP!