I moved all my Pages documents from my Macbook Pro to my present Macbook Air and then gave away my Pro.  Now, when I try to view my documents I get the message that the document is too old and I have to save it on Pages 09 first.  How do I do that? i

I moved all my Pages docs from my Macbook Pro to my new Macbook Air.  Now, when I try to view my docs I am told that they are too old and I must save them in 09 first.  How do I do that?  The version of Pages I am using on the Air is 5.2.2

No release of Pages v5 can open AppleWorks, Pages '05, Pages '06, Pages '08, or RTF documents. Sometimes, it cannot open its own documents.
You will need to do one of the following:
Borrow your MacBook Pro back until you can export all your incompatible documents to MS Word (Which Pages v5 can open)
Install your iWork '08 DVD on your new Air, and then immediately apply the following Apple Updaters. Again Export to MS document formats.
Pages v3.0.3
Numbers v1.0.3
Keynote v4.0.4
Purchase iWork '09 DVD, and then immediately update with Apple iWork 9.3 updater.
Open the document(s) that Pages v5 won't permit
Save as Pages '09 v4.3 documents, or export as MS Word
Upload to Zamzar, and convert to MS Word (free for limited volume)
No sensitive documents
Email notification within 3 - 4 minutes with MS Word document download link
After you do either item 2 or 3, run Disk Utility and verify/repair application permissions on your boot drive. Open your converted documents in Pages v5.

Similar Messages

  • Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7.

    Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7 Ultimate

    Looks like I fixed it., thanks to another post I read.  I went into my Norton Security.  Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow"  This also fixed my error (-3212) which would not allow me to connect to the iTunes store. 

  • HT201260 Tried to remove Symantec End Point software by dropping it in the trash and then emptied trash, of course now when I try and install newer version it tells me to uninstall the older version I can not access now. Any solutions?

    Tried to remove Symantec End Point software by dropping it in the trash and then emptied trash, of course now when I try and install newer version it tells me to uninstall the older version I can not access now. Any solutions?

    You usually have to use the program's uninstaller utility for such things as Symantec. Read this:
    http://www.symantec.com/business/support/index?page=content&id=TECH132120
    You may need to install it all over again, just to use its uninstaller.

  • HT1498 I tried to download a rented movie and it is only at 46%. When I try to view it there is an error message "error when loading" .  I have gone to settings and checked my downloads it advises that there are no downloads. I have reset the resolution t

    I am having problems renting a movie from the apple TV. The download only goes to 46%. I have tried changing the resolution to 720, I have gone to the settings and check for rentals it advises that there is no additional rentals found.
    Any suggestions.

    You have to go to SMTP settings for your email account and enter a password there. Sended and receiving are two different activities managed by 2 differet servers, and each may require a separate user ID and password.

  • After a trip to Brazil, the App Store apparently thinks my iPad 2 is still there. When I try to download an app, I get a message that I can't get that app from the Brazilian store and have to switch to the U.S. store. The general settings are correct.

    After a trip to Brazil, the App Store apparently thinks my iPad 2 is still there. When I try to download an app, I get a message that I can't get that app from the Brazilian store and have to switch to the U.S. store. The general settings are correct. I apparently need to switch locations manually, specifically for the App Store. Help?

    Open the App Store app, go to the Featured pane, swipe to the bottom, tap your Apple ID and sign out. Tap again and sign back in. The App Store will automatically change to the store from which your account is authorized to make purchases.

  • Pages 5.1 error "This document is too old. To open it, save it with Pages '09 first."

    When trying to open a Pages '08 file from a MacBook Pro in Pages 5.1 on an iMac, I get thr error message, "This document is too old. To open it, save it with Pages '09 first". I cannot locate a Pages '09 to use.  I can export the file from Pages '08 into a Microsoft Word Doc file and can open it then. How I do I solve the problem and open files in Pages 5.1?

    It is A solution that works if you don't have too many Page files to convert, but is very poor solution if trying to move everything off of the MacBook Pro to the iMac.  I don't necessarily need to open the 5 years of files, but if I need to look at something archived, I'm dead in the water.
    It doesn't make sense that a Mac can open a Microsoft product but cannot open a Mac product.  I can understand that a program is not forward compatibale, but almost all programs are backward compatible. This same problem appears with Numbers 3.1.
    Apple needs Microsoft as a solution?

  • HT1750 Pages, This document can't be opened because it's too old.  To open it, save it with Pages 09 first          still can't open pages document

    I recently purchased a new Mac and I am having difficulty opening older Pages documents.
    Pages, This document can't be opened because it's too old.  To open it, save it with Pages 09 first          still can't open pages document

    Either you have access to Pages ’08 v3, Pages ’09 v4, or neither. One of these older, but more functional versions of Pages can open, and export the document in question to Word. Preview on OS X 10.9.5 and Yosemite can view Pages ’08 documents (in my experience). It is not obvious to me that Preview may be using the installed Pages ’09 v4.3 to assist in opening these '08 documents.
    Once opened in Preview, you can select/paste text into Pages v5.2.2, or v5.5. If you want the images from the PDF, then export it from Preview as PDF, and then drag/drop onto latest free LibreOffice icon in the Dock, which will open the PDF for editing. Select, copy, and paste the images into Pages v5, or incorporate into Text boxes, or Shapes. When pasted, images will be in their original size/resolution, not necessarily as small as they appear in the PDF.
    If the second paragraph is a chore, then follow Peggy's advice above on the sources for purchase of Pages ’09.
    In the future, I would not recommend trusting document architecture to Apple, and use a more accessible format (.doc/x) for better cross-platform access, longevity, and application choice. You may find LibreOffice, or Office for Mac 2011 a better choice for features.

  • When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.

    What can I do to start the program again, when it does not answer? The only message I get is that there is a serious problem.

    Thanks a lot for your quick reply! However, it works again, after a restart!
    Best regards,
    Hans
    Hans Storhaug
    Director
    Norwegian Emigration Center
    4005 Stavanger
    Norway
    m  +47 908 31 097
    9. juli 2014 kl. 10:57 skrev Mylenium <[email protected]>:
    When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.
    created by Mylenium in Adobe Creative Cloud - View the full discussion
    Without knowing anything about your system, nobody can advise. In any case, the ID forum would be a better place to ask such questions.
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6535011#6535011
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Just updated the lion os x, and now when I try to use my optus dongle, it comes up with the message saying that it won't work because Java Runtime needs to be installed.  Help?

    just updated the lion os x, and now when I try to use my optus dongle, it comes up with the message saying that it won't work because Java Runtime needs to be installed.  Help?

    Have you run Software Update.  You have Java already installed, but it needs to be updated.

  • HT204380 I am new to Facetime.  I want to be able to talk to my iMac from my Macbook.  When I try to connect via email I get a message that says the person being called "is not available for Face Time".

    I am new to Facetime.  I want to be able to talk to my iMac from my Macbook.  When I try to connect via email I get a message that says the person being called "is not available for Face Time".

    Hi PhiDor,
    Thanks for visiting Apple Support Communities.
    See this article for some information that can help:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Regards,
    Jeremy

  • HT1925 When I try to uninstall apple updater I get a message that says " The feature you are trying to use is on a network resource that is unavailable." I dont understand this. How can I finish uninstalling the apple update program?

    When I try to uninstall apple updater I get a message that says " The feature you are trying to use is on a network resource that is unavailable." I dont understand this. How can I finish uninstalling the apple update program?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?

    Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • And when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

    and when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

    Hey deepakmenonfrompune,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • When I try to delete an email, I get a message which says "The message could not be moved to the mailbox trash". How can I delete messages?

    When I try to delete an email, I get a message whih says "The message connot be sent to the mailbox Trash. How can I delet messages?

    Try going into Settings > Mail, Contacts, Calendars. Then select the account on the right-hand side of that screen, select Account, then Advanced, Deleted Mailbox, and under On The Server tap the 'Trash' folder (or whatever it is called by yor provider) so that it gets a tick against it - then come out of that series of popups by tapping on the relevant buttons at the top of them and then see if you can delete emails

  • When i try to open logic x i get a message sayingLogic Pro X unexpectedly quit while trying to use the Audio Unit "Kontakt 4" by "Native Instruments". This plug-in may require an update. how can i fix that?

    when i try to open logic x i get a message sayingLogic Pro X unexpectedly quit while trying to use the Audio Unit “Kontakt 4” by “Native Instruments”. This plug-in may require an update. how can i fix that?

    Update the plugin or delete it. 
    Kontakt 4 is a 32 bit plugin, it won't run in Logic Pro X
    You need Kontakt 5

Maybe you are looking for