I Movie 08 7.1.4 Audio

I have a movie of about 2 3/4 hrs. long, of a musical performance. The audio playback is way to strong on one side. I would like to export the audio, fix it, and bring it back. Can this be done ? if so how ? If not in I movie, what program will do this. I do have a digital recording studio, running Pro Tools 002, and a brand new Mac Pro w/ dual quad Intel processors.

Thanks for the advise, and I did try that. It is unfortunate that when the show was recorded, the camera operator used one mic on stage, and one off the camera. This gave me a very strong left side, and a very weak right side, with the audio. Using QT, I can balance it out, but it becomes very low in volume. Will a program such as FC Studio II, give me more access to the audio fixes ? Or, can the volume be brought back up later in the editing process ? Can the existing audio be exported? If so, to what ? Then can it be imported, fixed ?
Thanks, J. W.

Similar Messages

Mov files dropping video and audio frames CC 2014

I have been experiencing playback issues in Premiere and just got off the phone with Adobe support. It appears that there is known issue with .mov files dropping video and audio frames that will likely be fixed in the next release. My entire project is .mov files and we need to get some serious editing done to complete a rough cut of our film. As a bandaid, we have reverted the playback renderer to software only and I am experimenting with different preview file formats to see if I will have less dropped frames. I want to avoid converting my media from mov files at all costs as this would be very time consuming with over 100 hours of footage.
Please let me know if you have any other workarounds!
Sandy
Windows 7
Adobe CC 2014 (up to date)
Nvidia Quadro K2000 (driver up to date)
16 GB RAM

Welcome to the forum.
Unfortunately, MOV can hold all sorts of "stuff." See this article for some more detail: http://forums.adobe.com/thread/440037?tstart=0
Can you let us know what is inside that MOV "wrapper?"
Thanks, and good luck,
Hunt

When i try to import a .mov file, it only imports audio

when i try to import a .mov file, it only imports audio - what cani do to fix? windows media player plays it fine

Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
The Help-and-Tutorials page http://forums.adobe.com/thread/1275830 may help

How to make a movie of a presentation keeping audio and pictures in sync

How can I synch slides and audio (the audios are different lengths) in a presentation and turn it into a video.
Each slide should stay in place until the audio has finished (the audio's are slightly different lengths).
I've tried using a free trial of "Adobe Presenter" but I couldn't seem to make a movie of my presentation.
I will consider purchasing the software that will do this for me as I have a few presentations I want to make and convert to movie format for my colleagues to watch (this is to help in a teaching environment).
Is there a program that will let me match up my audios and slides in the correct order and synch them so the audios do not move beyond the slide for which they are intended? Any help much appreciated with this problem.

Hi,
The slide duration in presenter is automatically adjusted according to the time of the audio inserted on that slide.
How are you inserting audio on slide ? Recording or inserting using presenter option ?
You cannot create a movie format like avi, mp4 etc
But you may publish the presenttaion in the swf format which will play in a browser or a swf player. To play in the broswer you just need to have Adobe Flash Player installed on your system. It will play like a movie in the broswer.
Let me know if you need some more help
Thanks,
Alpi Agarwal
Adobe Presenter Engineering Team

After burning to dvd, using idvd, movie stops on frame but audio continues

After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!

Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results?

Exporting Audio to Movie, doesn;t export the audio

When I try Option>Movie>Export Audio to movie It rendereds but doesn't actully put the music into the video. Worked in 7.1 doesn;t work in 7.2.1 any plans on fixing this?

Indeed, thats what I do, but the time saving and
simiplicity of the 'Export audio to movie..."
function puts it at the top of the 'features that
really should work' for us composers to picture!
Hopefully it will be fixed soon with an update.
It's not broken. To be sure I went and tried it myself
and it worked fine. I did not even have to set the
locators, which I thought I would have to. I just dropped
the movie on a project and went to the menu. It did bring
up some dialog box I had not seen before. Something about
adding the tracks to use. It only showed track 1 but since I
could not figure out how to add the tracks I just hit OK and
it rendered all of them. Hope you get yours back up.

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

Can Apple TV stream movie and other non-music audio to airtunes

I suspect the answer to this is that it is not (currently) possible.
I can stream music in itunes directly from the ATV to my hifi speakers connected via airtunes and an airport express, but I'd like to be able to stream other audio too, such as movie sound tracks. I know this can be done using airfoil from a mac, but I can't see an obvious way of doing the same with ATV. Am I missing something?
Thanks

Swaldale wrote:
One day perhaps...?
that would be speculation.
there's always _*Apple TV Feedback*_.

HT202157 Rented movie on ipad and only audio would come through on my Apple TV. What is wrong?

I Rented a movie on my ipad and tried AirPlay on Apple TV but only audio came through how can I watch video too?

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

When I transfer movies to my USB the audio lags.

When I transfer movies to my USB to watch on my TV, the audio lags. It's perfectly fine when I watch the file on my computer.

USB, in all it's flavors, is simply too slow to play a video from. Your hard drive is much faster and therefore you have no problems.
So, when you can, copy the video to your hard drive and leave your USB thumb drive at home.
Clinton

Some TV shows/movies will not airplay with audio.

While airplaying/mirroring some movies/tv shows will not play with audio.

I have this problem also...it's *****. Stil cant figure it out

Movie trailers app has no audio

I'm not getting any audio from Apple's movie trailers app - unless I'm using headphones. Otherwise, nothing. Anyone else have this issue, as well?

Am I better off just springing for QuickTime Pro? Can Pro convert the VOB files to an iPod-readable format?

Why can't i see a movie i bought, when the audio works?

I've downloaded a movie, but when it plays, i can only hear the audio, i can't see the movie...anyone know how to fix this?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Converting .mov video to an mp3 audio file

Any chance of doing this? I like the song from a video and want to save space by just saving the audio. thankx

Audio Hijack would do it. It is not free software but well worth the expense. I have used it to record radio programs, movie audio only, and a ton of other things.

My old movies now only play the audio

My old movies that used to work just fine on my 60 GB Ipod are now only playing as audio files.
The problem started about a month ago, not sure why. Probably windows, lol. When i went to the video list all of a sudden EVERY song and video was being displayed as a video. However, the tracks that were truly videos were playing as audio only. So i went to video settings and made sure that it wasn't on tv out. The problem persists. So then i connected my ipod to my computer and under the ipod summary screen it says i have audio, photos, but no video. So i went to "get info" on the videos to see if they had changed into audio files but it still says under "summary" and then "kind" that it is a MPEG-4 video file. So then i tried playing it in itunes and IT WORKS FINE! I will mention again that all these videos were playing just fine before. What is going on!?!?
HEEEELP!!!!
- Windows XP Windows suks.

Go to edit-->preferences with the iPod showing up in iTunes and hit the iPod tab. Then hit the podcasts tab under the iPod. Make sure transfer all podcasts is bubbled. Now go to the videos tab and make sure transfer all videos is selected. Click okay.
See if they now appear
btabz

I Movie 08 7.1.4 Audio

Similar Messages

Maybe you are looking for