I-movie 9 removing sound from imported video

I cannot using any instructions I can find remove sound from an imported video.
It was very easy in i-movie HD, but in that I could not speed up the soundless video to match a voice-over added just as easily.
Whatever I did, the Detach Audio remained grey and unusable.
Can anyone tell me which is supposed to be better - i-movie 9 or i-movie HD?
WHy do they have two systems running in parallel?
All clues welcome

Hi
Which I could help. Can't.
Can anyone tell me which is supposed to be better - i-movie 9 or i-movie HD?
Yes. iMovie 1 to HD6 and iMovie'08 & 09 are two totally different products - not related
in any close way at all.
iMovie'08 & 09 are Wrongly named - so that they most often are misstaken to be related.
Yes -
• iMovie 1 to HD6 are supperior - IF YOU use miniDV (interlaced SD-video) and aim to make a DVD
• iMovie'08 & 09 are for material from newer HD, hard disk, memory card and mini DVD Cameras
and are aimed for quick editing and web publishing. (DVDs will not be as good as they can)
Yours very understanding - and whiching that I was of more help - Bengt W

Similar Messages

Remove audio from imported video

Hi guys!
Tried to search for this feature, but did not find anything on it.
Is it possible to remove the audio from an imported video clip (FLV) in Captivate 5.5? I want to replace it with another recording.
Thanks,
Victor

Hi,
This is not possible inside Captivate tool. But you can achieve the same using 'Adobe Media Encoder' tool (AME) which gets installed as a part of Captivate installation.
1. Launch AME and insert the FLV file
2. Go to output format settings and look for "Export options"
3. uncheck the "Audio" option
4. Start the encoding process to get a newly encoded FLV file.
You can use this in your Captivate projects and then add a new audio file as per your needs.
Hope this helps.
Regards,
Mukul

Removing sound from embedded video

I have a flash video in a slide that I would like to remove the sound for. I have an mp3 file with audio that I want to go with the video rather than the audio from the actual video. How do I remove the audio from the embedded video?
Thanks
Sierra

Hi there
There is no way I'm aware of to do this using only Captivate.
I'm thinking you will find that the only way to do this is by using some Video Editing software. Perhaps Premiere?
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Using iMovie. I selected "New Movie" from the menu. Now when I click on "Events" all I see is the movie. There are no imported video cups to select from. What did I do

Using iMovie. I selected "New Movie" from the menu. Now when I click on "Events" all I see is the movie. There are no imported video cups to select from. What did I do?

At the top middle of the screen is a clips filter. Make sure that "All Clips" is selected.

When I closde a page where there has been a video, ie youtube or the like, the sound from that video that had played will continuw to run. I can close Firefox and upload it again and still will the sound of the video continuew to run. WHY?

When I close a youtube video or some other video and even after closing the tab the sound from the video continue to be played. As a matter of fact I have even closed Firefox and re-started Firefox and it plays again. I even went and turned off the computer and re-started the computer and then Firexox and the video sound was still there playing. WHY is this happening???.

Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video.

How do I mute the sound from the video camera when burning a DVD

Hi there. I'm a new user of Elements 8. I have compiled some clips and added a soundtrack to the movie, When you preview the file you don't hear the sound from the video camera but when I burn it to a DVD you still hear the video background. How do I burn the DVD without the background sound from the video camera? On the DVD I only want to hear the soundtrack I added.
Thank you,
Doug

Thanks guys. Both options worked. Dowside to deleting audio (option I went with) appears to be that you lose the audio forever. So if I ever wanted to bring the audio back I wouldn't be able to.
You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
With using the audio mixer it appeared I had to mute each clip separately. When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
Any way to use the audio mixer to mute the clips in mass?
See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
Hunt

Remove sound from mp4 file?

I want to remove all the sound from a video that is in mp4 format. How do I do this?

How to read each "word" in the input file?Well, you'll need to "tokenize" the file as your reading it in. Look at the API docs for java.io.StreamTokenizer and see if that's appropriate for your application. If not, you can simple read the data in character by character and have some logic that decides what is a word...

HT4528 Can I save a sound from a video into a ringtone?

I want to save sounds from a video taken on my iPhone 5 to use as a ringtone. Is this possible and how?

Export into computer - extract sound - upload to phone.

How do I remove the sound from a video project and replace with music...?

Hi there to all...I would like to know how you remove the original sound from a movie (using iMovie) so you dont hear it through any music added...?

Select the video clip and open the clip inspector to the video tab. You can set the volume slider to zero.
You can apply this to a bunch of clips at once.
Do the first one.
Then Edit/Copy.
Then Select the clips to apply it to by select while holding command key. (or EDIT/SELECT ALL to get all clips)
Then EDIT/PASTE ADJUSTMENTS/AUDIO ADJUSTMENTS

How do you remove the sound from the video's in imovie 08

hello
just wandering how do you remove the original imported movie sound in imovie 08 ?
so that i can play my own sound track, i know it could be done in 06 ,but i just can find it in 08
any help would be great
thanks
yaddle2go

Just wondering ... can you then add other background music ... and not use the audio recorded from the camera at all?
Yes. You can add your own audio either to the background of several clips or "pin" it to a single clip.

Program to remove sound from video and join video with audio file?

With which program can I remove the sound of a video and join/sync the video file with another audio file?
Thank you

Can I suggest using something that will allow audio capture from the external mic. to start with. Then you will have a video with audio in sync, in a format that you can re encode into whatever format you wish.
But, if you must do that. Dump the video from the handycam file, then put the mics audio file with it. ffmpeg -i video ffmpeg -i audio into whatever container and codecs that you want. You may have to adjust audio-video sync
ffmpeg -i audio -itsoffset 0.1 -i video
Search this forum and the web. There are hundreds of ffmpeg examples. And the ffmpeg man
https://ffmpeg.org/ffmpeg.html
ffmpeg will do just about anything, but is a little daunting. Ask specific questions and you'll get specific answers. Or find a front end for it. I never use them.

How do I remove sound from video in Final Cut Express?

How do i get the sound off the video.

You can unlink the audio and video in the timeline (click the small chain link icon in the top right of the timeline) and delete the video or audio track. Is this what you meant?

Removing menu from Flash video in Dreamweaver

I have used the Flash Encoder to convert some videos to FLA.
I am now using Dreamweaver, "Insert->Flash Video", to add a FLA
file to a web page. I got the video in fine and it plays on the
page just fine. I would like to remove the menu from the video, but
there is not an option in properties to select "none" for the flash
video menu. I also tried changing the attirbute
"&skinName=SteelExternalNoVol" to "&skinName=none" and that
made the flash video not show up.
I would also like to loop the video and that option is not
available in the Dreamweaver menu.
My code is
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0','widt h','375','height','250','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_graphics&autoP lay=true&autoRewind=true','quality','high','scale','noscale','name','FLVPlayer','salign',' lt','pluginspage','http://www.macromedia.com/go/getflashplayer','movie','FLVPlayer_Progres sive','wmode','transparent'
); //end AC code
</script>
<noscript>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="375" height="250" id="FLVPlayer">
<param name="movie" value="FLVPlayer_Progressive.swf"
/>
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="scale" value="noscale" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_ graphics&autoPlay=true&autoRewind=true"
/>
<embed src="FLVPlayer_Progressive.swf"
flashvars="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos /3d_graphics&autoPlay=true&autoRewind=true"
quality="high" scale="noscale" width="375" height="250"
name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
</noscript>

Could someone tell me if I should be able to add parameters
to this code and get results. I have found mention of values like
<param name="loop" value="true" />
but when I used it nothing changed on playback.

Removing menu from Flash video

I am using Dreamweaver to add a fla file to a web page. I got
the video in fine and it plays on the page just fine. I would like
to remove the menu from the video, but there is not an option in
properties to select none for the flash video menu. I also tried
changing the attirbute "&skinName=SteelExternalNoVol" to
"&skinName=none" and that made the flash video not show up.
thanks
Allen

I have left the question in the Flash forum for almost a
week, but not even a "Hey get a book and a clue"
I am posting it back in Dreamweaver to see if someone has any
ideas. Right now I just would like to loop the video. I found a
small menu that is not too obstructive.
I have used the Flash Encoder to convert some videos to FLA.
I am now using Dreamweaver, "Insert->Flash Video", to add a FLA
file to a web page. I got the video in fine and it plays on the
page just fine. I would like to remove the menu from the video, but
there is not an option in properties to select "none" for the flash
video menu. I also tried changing the attirbute
"&skinName=SteelExternalNoVol" to "&skinName=none" and that
made the flash video not show up.
I would also like to loop the video and that option is not
available in the Dreamweaver menu.
My code is
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0','widt h','375','height','250','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_graphics&autoP lay=true&autoRewind=true','quality','high','scale','noscale','name','FLVPlayer','salign',' lt','pluginspage','http://www.macromedia.com/go/getflashplayer','movie','FLVPlayer_Progres sive','wmode','transparent'
); //end AC code
</script>
<noscript>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="375" height="250" id="FLVPlayer">
<param name="movie" value="FLVPlayer_Progressive.swf"
/>
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="scale" value="noscale" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_ graphics&autoPlay=true&autoRewind=true"
/>
<embed src="FLVPlayer_Progressive.swf"
flashvars="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos /3d_graphics&autoPlay=true&autoRewind=true"
quality="high" scale="noscale" width="375" height="250"
name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
</noscript>

"Sync All Movies" option is missing from the Videos tab.

Hi,
I just imported 453 short movie clips (totaling around 1.8 GB) into iTunes and now I want to synchronize them to my iPhone. I noticed that the option to "Sync All Movies" as found in previous versions of iTunes or perhaps only enabled for other devices is missing from the Videos tab under my iPhone's sync options. Is Apple seriously suggesting that I have to manually check off 453 boxes in a list box that only displays 10 items vertically at a time? I'm at a loss for words.
If there's any way I can have iTunes automatically do this, please let me know. Here's a screenshot of the feature in question, MIA for me:
http://www.info.apple.com/images/kbase/304680/syncmovies.jpg
Thanks.

My mistake, apparently shift clicking one item selects them all. I was trying to do the Windows CTRL + A shortcut (which works in the Library view but not in the list box of Videos to sync).
I guess that makes me a typical Windows user.

I-movie 9 removing sound from imported video

Similar Messages

Maybe you are looking for