I movie error -108 and crashing sometimes

I tried all suggestions and nothing worked. Tried exporting to quicktime and used options Video - compression type - "Apple intermediate codec"
compressor - HDV 1080p. Sound use apple lossless. This worked to a point. No error or crash just the "working box" with blue timeline disappeared. Any ideas??

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

Similar Messages

Powerpoint won't open (error 108 and 8060)

I tried to rename a PowerPoint file using Microsoft Office 2011. Afterward, the file would not open (giving me error 108) and when I tried to copy or move the file to a USB flashdrive or to Dropbox, it said the file is either locked or damaged and couldn't copy (giving me error 8060). The permissions are not locked, though, and the only reason the file could be corrupted is if it didn't like that I tried to change its name. When I tried to look at the File info and tell it to open with Powerpoint, I got error 35 saying my harddrive (Macintosh HD) is not available. Anyone else experience this or know how to access the Powerpoint? I recorded about 30 audio files saved in the powerpoint yesterday for a project at work and would really like to not have to re-record them.
Thanks!

not sure this is helpful. but i am getting the same error code when trying to open a pdf file. also when i was changing a pages poster i had created for my website and exported it to pdf on desktop., which then wouldnt open because of the error code 1 660. i know your problem is different (sounds complicated) but this is a new problem it used to do it , but not anymore, so i think it's strange and dont know why. any clues anybody?

My project gets an error message and crashes everytime I go to render or preview on AE

I have recently starting using AE on my computer, every now and then its struggled to work but I haven't had any major issues until now.
When I try to render or preview my project I've had an error message pop up saying:
"After Effects error: crash occurred while invoking effect plug-in "Shatter".
then followed by a second message
"After Effects error: Crash in progress. Last logged message was <6492> <getdepthpinflags> <5> 32:32 bit
and finally
"After Effects can't continue: sorry, After Effects has crashed. See http://www.adobe.com/support/products/aftereffects.html for known issues. If you still can't resolve this issue, please contact Adobe Technical Support (2).
it then asks me to save and crashes.
I think it may be to do with my computer specs as it does struggle at times in other areas on AE
can someone tell me if i need to buy something like a new graphics card or something?
I don't have any knowledge when it comes to computer specs so heres a link to all the specifications for my computer: HP Support document - HP Support Center
please help me! need to have this project finished so if I need to buy something new for the computer i need to buy it straight away
thanks

How much ram do you have installed? Which OS? Your link to specs provides no details for your system.
What version of AE are you using down to the last decimal point?
We need to know something about your project. The kind of footage used, the size of the comp you are trying to render, the render settings are all critical information.

Couldn´t export a movie (error - 108) Help!!, Couldn´t export a movie in 720 (error - 108) Help!!

I am traying to export an 5 minutes movie using Imovie, but I can´t. An I need to fixt it. Help please!!

Hi
Error -108
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
Can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

Iweb 08: adobe flash player error messages and crashing when saving

Hi.   I switched not too long ago from an 08 Imac to a mid 2011 with Mountain Lion.    I brought the applications I could from the other computer, including Iweb 08.
today was the first time I tried to tweak my site with it. I opened the old file on the new computer using this method:
http://iwebfaq.org/site/iWeb_Transfer_Site.html
All seemed well at first. Then I got a slew of error messages to the effect of "Adobe® Flash® Player has stopped a potentially unsafe operation. The following local application on your computer or network: blah blah is trying to communicate with this internet-enabled loaction: blah blah blah".
My site is used to display my work in the video production field, so it's related to the various players/videos embedded.
In addition, when I tried to save after opening that first time, and any time, since, it crashes during the save.
Any ideas what's going on here?
Here're two of the pages on my site that were making iweb go nuts:
http://videoproduction.joshbass.com/Videoproduction-_ENG_Interviews.html
http://videoproduction.joshbass.com/Videoproduction-_Commercial.html
Thanks.

Whether or not you use iWeb, you may be aware that things have changed. Since you're a professional, I assume the trade must have talked about it.
I'm not a professional, but I have read about it for the past few years.
Adobe Flash is on it's way out. Especially on Mobile devices, such as my iPad, where your movies do not display.
Here's how I do it.
It started with this in Flash :
http://www.wyodor.net/_Movies/rolando/
Then made this with the <embed> code 4 years ago :
http://www.wyodor.net/Tutorials/ImageWidget/ClickMovie.html
And in a similar style, made for iPad :
http://www.wyodor.net/mfi/cultureclub/Movies.html
Then HTML5 came along and made a sample with custom code to explain it :
http://www.wyodor.net/_Demo/html5/HTML5Video.html
And with code from the Interwebs :
http://www.wyodor.net/_Demo/html5/HTML5_Zencoder.html
http://www.wyodor.net/_Movies/sublime/
And regarding the Adobe messages? It's not particular to your situation. It's a warning that you try to use Flash outside the protected area of a website.
You can either ignore it, or prevent it by making separate webpages for each flash video and then display them with an iframe in the HTML Snippet. The HTML5 demos above do that.
So the magic word is : Educate.

Title tool VideoFrameFactory error message and crashing

I have located a few mentions of this error among other users, but no Adobe response and no clear solution. In PP CS6, I am now getting a an error message every time I open the title tool: ../../src/VideoFrameFactory.cpp-78. About half the time it also crashes. Frustrated! I am trying to complete a two minute video and this portion is taking hours as I keep needing to open up the title tool related panels and to re-start the computer. Please help if you can.

I too have been having the same issue for weeks now.
I'm using Premiere CS6 6.0.3 creative cloud. VideoFrameFactory.cpp-78
Whenever I open a title, or make a new title, I receive the error.    Then I can do one of 2 things...
1. I can close the title, it will save, and then I can exit Premiere and restart Premiere. Upon opening a title, I will get the error message again.
2. I can open another Title (instead of closing Premiere). I will then get the same error message (videoframefactory.cpp-8), but then Premiere will crash. This is 100% occurance rate... If I receive the error, and I dont want premiere to crash, I must exit before opening another title.
I have seen this posted since 2010. Any chance of a fix? I tried various other leads... such as font re-installs, and deleting a WorkspaceConfig file. No luck with either of these.   Also tried a few iterations of Nvidia drivers, uninstall and reinstalls.
Any chance of some assistance? Has anyone else found a fix?   Every day I use the creative cloud, it feels more and more like I'm paying a monthly fee to be a beta tester...

Error message and crashing of LabVIEW 5 when controlling K-Teams Khepera robot

I have the gripper turret attached to K-Team's Khepera 1 Robot and use the K-Team provided LabVIEW VI's to control the arm movement or gripper. Every so often I get an error message after the VI runs and LabVIEW has to shut down.
Does anyone know why this is? I dont' know whtehr you will know the exact cause but maybe what the error meassage below means. I am using LabVIEW 5.0 and the error message is shown below and in the attached file.
Thanks
Sam
LABVIEW caused an invalid page fault in
module LABVIEW.EXE at 0137:0076cc3b.
Registers:
EAX=00000004 CS=0137 EIP=0076cc3b EFLGS=00010212
EBX=00000074 SS=013f ESP=01a6fd68 EBP=01a6fd74
ECX=00000001 DS=013f ESI=0323c498 F
S=31bf
EDX=000000f4 ES=013f EDI=00000000 GS=013f
Bytes at CS:EIP:
f3 a5 5e 5f 59 8b e5 5d c3 57 06 1e 66 8e da 66
Stack dump:
0323c498 030b5b31 00000000 01a6fee4 006b4f21 0323c498 00000000 00000004 030b5b30 00000007 0323c0bc c10745e4 01a6fdd8 bffa4633 03076ece 03076e44
Attachments:
labviewgrippererror416.bmp ‏64 KB

I'm not an expert per say but this could be a Windows corrupted hard disk fault.
Perform System Backup!!!
Empty re-cycle bins
Delete Temporary files
Run disk check
Defrag hard disc
reboot
Defrag hard disc
Rationale
A page fault is either memory or memory being paged to hard disk. An error in allocation raises this issue. I have seen it most often when the hard disk is heavily fragmented and or mis-allocation of hard disk space as a result of the aforementioned and Microsoft Word leaves temporary files around that have caused these kinds of issues.
There is a smaller possiblity that you have faulty memory but that's much less likely I would think.
Run a load of apps like Notepad with BIG files in them to cause the system to fill up and page to disk
then see if you get the same issue.

Ical responds with "The server responded with an error." and crashes. How can I fix it?

The messages continues to send info to Apple. Ical will not stay open long enough and will not allow me to make any changes. My password on google has changed but I do not know how to change it in Ical. Is this just something I will never be able to use again?

Sorry, no help there. Ical does not stay open long enough to do anything with. All it does is crash and apologise and say it will notify Apple.
Guess I will just delete it altogether and use google calendar.

Anyone attempt to download PHOTOSHOP ELEMENTS v12 and got false error messges and crashes?

I had to download Premiere Elements v12 and Photoshop Elements v12. Premiere Elements went fine but Photoshop Elements gave me false error messages about disk space and user access. Anyone else have this problem?

right click the installation file and click 'run as administrator'.

Premiere Pro CC error message and crash

Hi All,
I am in the middle of a project and on a tight deadline. I have Premiere Pro CC and have tried the phone line for help. However, after 90 minutes on hold, I gave up and thought I'd try here.
So I have a project that was loading fine yesterday. I shut PP down last night and all was good. Today I tried to open the project and it gave me an error message that read;
[/morereel64/releases/2013.09/shared/adobe/MediaCore/MediaLayer/ImporterHost/Make/Mac/../. ./Src/Audio/AudioWaveform.cpp-173]
After that, I click "Continue" and it then tells me "Sorry, a serious error has occured..."
I have tried uninstalling All Adobe Apps, using Cloud Cleaner, deleting my preferences, creating a new project and importing the old one in, exporting an XML to reimport... Nothing is working. And now I'm panicking!
Please can someone help? Please?
I'm kinda going out of my mind...
Thanks

New projects don't seem to have this problem with 7.2, but I have a critically important older project that I can't seem to make work even after deleting Media files and letting them rebuild. I also tried importing the old project into a new one. I sent it to speedgrade then saved it as the premiere project... and as soon as I open the premiere project... there it is again. It freezes... needs to be closed, and then the project is corrupted and unuseable. I spent a few hours with an Adobe Tech controlling my computer... until we ended up with the Blue Screen of Death. I really need some answers on this.. at LEAST how to salvage a good timeline from this project and make it work with SpeedGrade. This is a feature length documentary that is very large. The project is shot in 4K, but I'm editing with HD proxy footage for all except a couple of shots that I'm using the 4k Footage. MOST of the footage on the timeline is MPEG2 from a Sony F55. Some is from a Canon 1D.... and as I said.. a couple of shots are Sony XAVC 4K. HELP!

I was forced into an update and now i get constant error messages and crashes I'm missing folders and it doesn't work the same way twice.

Last week I had a pop up that said I had an update from Thunderbird. It wouldn't take no for an answer and went ahead and did the update. It updated to 12.0.1 which from what I can see is already outdated. Since it did its update it hasn't worked right and I keep getting messages of long running scripts. I have messages running in tabs across the top that I can't get rid of. It takes extra steps to get back to the inbox. I also lost 2 of my folders. I' ran AVG scan and maintenance. Malwarebytes found 2 problems that it quarantined but didn't seem to be associated with T/bird. One folder came back after that. I have another folder that is labeled NSTMP that shows 518MB of use but when I open it there is nothing there. I'm not sure if I picked up something in the last update or not. It seems it tried to do this before and I told it never to update. At this point should I just update to the latest program and see what happens? I can't seem to find a way to transfer all of the folders to a thumb drive without going one message at a time and I'd at least like to back it up. Any thoughts/ideas appreciated. Thanks Doug T

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Error Message and Crash at Startup

Every time I try to start PP I get message /ppro721/releases/2013.10/shared/adobe/MediaCore/ASL/Foundation/Make?Mc/../../Src/Directo ryRegistry.cpp-283
I unistalled and reinstalled program and updates, but no luck. Any ideas?

Have you tried Adobe chat?
Next link has a "Chat Now" button near the bottom
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Error 108 & 109

Hello.
Trying to download the trial version of CS6 Master Collection, but the ADA isn't working. I've been through all the steps in your troubleshooting guide, tried saving to the desktop, even turned off my antivirus, yet no luck. The ADA oscillates back and forth between error 108 and 109 everytime I reset the product download--but the download never starts.
Anyone help?

108 indicates a corruption of your download and 109 indicates a connection problem. Please try initiating a direct download utilizing the steps listed in http://forums.adobe.com/thread/981369. If you still continue to experience difficulties please try an alternate Internet connection.
What method are you currently employing to connect to the Internet?

Trying to finalise my movie and keep getting error 108

Trying to finalize my movie and keep getting a message saying error 108 please help?

http://support.apple.com/kb/HT1526

Help! Error (-108) in iMovie and crashing a lot

I have a 60 second video that I am trying to publish. It will save about 3/4 then I get an error (-108) message. Also, my imovie crashes A LOT. I'm working on another 3 minute project, and it crashes after trying to modify some clips.
What's the solution?

Hi,
You can try this: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Hope this helps.
Rameez

I movie error -108 and crashing sometimes

Similar Messages

Maybe you are looking for