I must be stupid... Where have my playlists gone?

Touch 2G... I went to a lot of trouble to create my playlists. They synched okay when loading the Touch. But now, when I touch Playlists, all I see is Genius and On-The-Go. Where is all my music? I can access it through the alphabetical lists of Artists, Songs and Albums, but my Playlists are nowhere.
What am I missing?

Ah! Okay. The Touch must have been recently synched to show the Playlists. That's very different to regular iPods I have owned when the playlist list is always available.
Now I have another problem: it's regarding permanent extreme loudness. That's for another thread I think.

Similar Messages

Where have the charts gone in iTunes 11?

In genereal I like iTunes 11 but I can't find any top 10 charts for music, movies, TV shows apps or books! Where have the charts gone?

Thanks Poikkeus but I still can't find it! I assume you're referring to the music pulldown menu? There's no Charts selection in there. Maybe it's different for iTunes Australia?

Recommended servers that will run Solaris 8 - Where have they all gone?

I've been struggling to install Solaris 8 HW02/02 on
some Dell Poweredge kit (2GHz CPUs) with no success
and even supermicro boxes. Does any one have know of any
rack mount 1U / 2U servers that will install and Run.
Must be 1-2 CPUs, lots or RAM, have SCSI/RAID and a
few drive bays. The stuff in the HCL cannot be bought new!
Thanks.
DB

There's one photo page for each theme. So depending what template theme you pick, it will look slightly different.
This is a user forum, by the way You won't get a response from Apple here.

Ignorant question: Where have my photos gone?

Apologies if you think this has been covered previously but similar queries haven't answered my ignorant but basic question. I can't find where my photos are saved to in iPhoto 08 - in 06, the file structure is 1) visible to me and 2) arranged chronologically. Please put me out of my misery and tell me where I can find the files!
Cheers,
Bobber

With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Want to visit with them? Find the Library icon in the Pictures Folder and right click on it. From the resulting menu select ‘Show Package Contents’. A Finder Window will open with the Library Exposed. It will look familiar.
Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
All of the above are a: Faster and b: Safer that rooting through the folders of the iPhoto Library.
Regards
TD

HT1277 Hi, any help will be appreciated. I use AOL for my email. I have probably getting on for 300 addresses but only 50 or so appear on my Ipad email facility......where have the others gone??

Hi, any help will be appreciated. i use AOL for my email where I have about 300 addresses shown but when I use the 'mail' function on my Ipad only a small percentage of those addresses appear..why is that and how can I get my full address book loaded?

Hi, any help will be appreciated. i use AOL for my email where I have about 300 addresses shown but when I use the 'mail' function on my Ipad only a small percentage of those addresses appear..why is that and how can I get my full address book loaded?

Where have open file gone?

Hello!
I've upgraded from SQL Developer version 1.1 to 1.5 yesterday.
I wonder where the 'open file' menu entry in the context menu of a sql worksheet has gone. Currently I have to choose a database connection separately after the file is loaded.
Second question: Scripts which call subscripts themselves like 'start anotherscript.sql' don't work anymore. Such a call ends up in an error message saying 'Unable to open file...' It seems to me that SQL Developer doesn't search for the subscript in the directory of the main script anymore. Do I have to use absolute paths now if I want to work with version 1.5???
Kind regards

This is a TERRIBLE design, I'm rolling back to 1.2. If I open a script that runs other scripts in the same directory, I cannont keep setting my preferences script directory over and over each time I go somewhere else on my hard drive.

Where have my songs gone?

I am unable to access my purchased songs. It says I have both my computers authorised, which is ok.
How do I get to listen to my songs?

No such thing as “too many songs”. :-D
See: How to Transfer Music Between the Computer and iPod
And: Transfer music manually
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.
Manage the iPod either Manually or via Selected Playlists.
How to Create a Smart Playlist
Deleting Songs or Playlists from your iPod

Where have my fonts gone?!

I'm using keynote '07 but since installing Leopard something weird seems to have happened to my fonts. I'm sure that you usually have access to all the fonts (and so can change text on a slide to any font, regardless of the theme, right?) but now when i open the fonts pane there's only 3 or 4 fonts there. All the fonts are still in my main fontbook, so what do I need to do in order to get Keynote to recognise them?

I tried using the Font Book - "Remove Duplicates" and made sure there are no more duplicate fonts installed. It DOES NOT appear to have fixed the font problem (the number of versions of the same class presentation are proliferating as I try to fix this before tomorrow).
Additionally, the Font Book Duplicates fix DID NOT fix Keynote from crashing. The only thing that seems to be working is what another poster wrote on another thread - I am changing each and every font manually from Helvetica or Arial back to Gil Sans, Garamond or Futura - and that seems to be working so far (other than the 4 hours I've spent on getting slides back to where they were in July....)

945P Neo - Where have my IDEs gone ????

Hi all
Have just bought a 945P Neo which I was really pleased about but when I set about installing the bits and pieces, I noticed that it only has 1 IDE connector ??
The space where IDE 2 and 3 should be are vacant as are the 2 chips just above them.
Can anyone explain why this is the case ? Have I somehow bought a scaled down or 'demo' version or something. It's most unusual just to have the one IDE connector and as you can imagine I am now stuck for somewhere to connect my second DVD Rom drive.
Can the IDE 2 and 3 ports be added easily and failing that, what is the maximum number of devices that can be connected to just the IDE 1 connector ?
Thanks in advance.

Hi Dallasourora and others,
I am finding this problem to be more and more insidious.
It was bad enough that the box says PLATINUM and we didnt get our IDE ports, but it also says that it supports SATA RAID. I have now found out for sure that it does not!
The ICH7 Chip does not support RAID! Additionally it does not appear to support NCQ either.
It takes the ICH7R to get the raid function.
I have spent hours and hours trying to install a RAID only to find this motherboard does not support it.
This appears to be one of the worst motherboard purchases I have ever made. The advertising ploy that MSI is using here would be like putting a 12" monochrome monitor in a box labeled 42" Plasma display. I am appalled.
I have written to MSI, but I am not holding my breath for a resolution. Looks like I'm out a few hundred bucks for nothing.
I see we are not the only ones puzzled by the labeling on the box.
Quote from: dadrabbit on 05-June-06, 21:05:45
ow...your box says "945P Neo Platinum"??
if it says then you got a platinum...i really don't know why "Neo" is written on the box since in MSI website the name for this MB is only "945P Platinum"
[/color]

Where have Site Profles gone

I have MX and I am stunned that all my defined sites have
gone from the right side panel.
Are they normally stored in a separate data file ? If so what
would it be and where would it be.
If not, what could be the cause of this?
Thanks

guessing windows OS?
dreamweaver stores the site definitions in the Registry file.
If the registry file is "flaky" or if the box is unplugged
before updates to
the Registry file are done, the site definiton info can be
wiped.
there's a third party tool for windows that will let you make
back up files
of the site defintions.
http://mm-exporter.joexx.de/
you can also use the Export button in the define sites dialog
box to create
.ste files
If only the site definitions where lost- no site files were
lost. no actual
site assets. Define the sites again, then back up the site
definitions, and
go on.
> Yes I know it would be my end and don't blame MX at all,
just would like to
> know what I or my box may have done to cause this.
>
> I will check the manual and the help file but would also
like to know what
> file it is in if it is a file.
>
> All my files are still in html some with css and some
with templates.
>
> Thanks,
>
>
>
>
>
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Blue Screen of Death - where have my credits gone?

Hopefully someone can help!
Recently I had to rebuild my entire hard drive after the "blue screen of death" forced my hand! I have reloaded i-tunes and can see under previous purchases all the tunes/films I downloaded - my queries are - how do I get these items back onto my rebuilt hard drive? And, I'm sure I had some credits left on my account - but since the rebuild, no credits are appearing. How do I go about getting all my old downloads back and how do I find where my birthday/xmas vouchers ended up?

If you replaced your screen (or had an unauthorized 3rd party replace it), then sell if for $40.00. Apple will not issue an out of warranty replacement that has been opened by a non authorized repair center.

CRIO Poor Performance - Where have my MIPS gone?

I have a cRIO based system that is used to control a motor for a particular application. The application has been developed and enhanced over the years and is currently using about 50% of the CPU. The RT Controller is a cRIO-9012. I have recently been asked to add a 1 kHz (or more) loop function to the cRIO application. I can only achieve a maximum loop rate of about 200 Hz. When I told the customer this, he asked how fast my controller was, to which I replied 400 MHz. “Where is all the CPU power going?”, he asked. He's now thinking of replacing the cRIO Controller with an mbed with C code to get the performance he requires, which is a pity since I'd like to continue developing the application in LabVIEW.
Following on from his question, “where is all the CPU power going?”, I decided to write a simple application to test the cRIO 9012's performance. Below is the code I used to perform the evaluation:
With just the bottom loop running, which reports CPU load over the cRIO Controller's serial port, I have a CPU load of 7.0%. This is the baseline.
I then add the "execution" loops as shown above the bottom loop, one at a time and recoded the CPU load. Here are the results:
1 Loops - 18.3% load (11.3% extra)
2 Loops - 29.4% load
3 Loops - 45.5% load
4 Loops - will not run!
I have two problems/concerns.
Concern 1
The cRIO 9012 has a 400 MHz processor, which has 760 MIPS of processing power. The rate of the simple loop is 2 kHz and each loop takes about 11% of the CPU power. That is, each loop uses up 83.6 MIPS and each loop iteration uses up 41,800 instruction cycles. Where are the 41,800 instructions going? Even if there was a context switch after each loop iteration, this would account for 150 to 200 instruction cycles. Each loop is only doing an integer increment, timing check, compare and branch. These should only take up about 4 instruction cycles (8 if you want to be generous). If this was programmed in C, you could get bare metal performance that allows a single loop rate of something like 40 MHz or with an RTOS something like 2 MHz. Instead, my maximum loop rate is something like 20 kHz.
Where are the "wasted" 41,600 instructions per loop iteration going? This is only 0.5% efficient!
Concern 2
Why does adding the 4th "execution" loop cause the application to halt (or at least not send data over the serial port)?
I like programming on the desktop using LabVIEW and I like programming the FPGA using LabVIEW. The RT Controller is however becoming an embarrassment. Is it really the case that the best additional loop rate I can add to an existing application that already uses 50% of the cRIO Controller's CPU can only be 200 Hz maximum?

Thanks for all the feedback.
MajorTom,
Changing to timed loops instead of while loops makes the performance worse. For 2 Loops, rather than a CPU load figure of 29.4% (22.4% after removing base load) it shoots up to 78.4% (71.4% after removing base load). That is, it runs about 3 times slower, which takes the "efficiency" down from 0.5% to 0.15% efficient.
TimothyA,
I tried making the "execution" loops subVIs (with Preferred Execution System = other 1, with the top level = other 2) and that solved the four "execution" loops problem. Thanks, one of my concerns is now resolved (I'll mark it as such once the conversation quietens down).
The execution time is still large with the 2 loops taking 29.1% of the CPU, which is the same as before.
I tried using the "reduced" us wait next multiple CLN.vi, but it appears to be in LabVIEW 2014 and I'm using LabVIEW 2013. Any chance of resaving it as LabVIEW 2013?
crossrulz,
Thank you for pointing me to the table in the CompactRIO Developer's Guide. I assume you’re talking about Figure 3.5. Priorities and Execution Systems available in LabVIEW Real-Time. I didn't realise that Execution Systems are limited in the number threads (would be nice to get a warning when this happens). This will make interesting reading and experimentation.
All,
I’ve tried various loop limiting rates including Timed Loops and While Loops with RT Wait Until Next Multiple, RT Wait, Wait Until Next Multiple and Wait and the best perform is from the two RT waits. The worst performance was from the Timed Loops.
In summary, I’ve solved the problem regarding how to run more parallel loops, but I still get very poor performance with each loop interaction taking about 41,800 instructions when it “should” take more about 200 instruction cycles. All I want is to be able to run a loop at at least 1 kHz on my cRIO-9012 when I already have an application that takes up about 50% of the CPU. I have the threat of the code being moved to an mbed using C, which I’m trying to resist. Surely a 400 MHz controller can have a 1 kHz loop and not take up more than 10% of the CPU.

Where have System Preferences gone???

After re-installing the operating system, because it was no longer possible to log on to my iMac, suddenly there are no more system preferences. I select "System preferences" in the Apple menu and nothing happens.
Any ideas what to do or try to get access to system preferences back?
iMac G4 Mac OS X (10.2.x)

Hi Michael!
Is System Preferences still in your Applications folder?
Does it appear in the Dock?
Computer > HD > Applications: HERE?
In Another Of Your Posts, your computer specs state that you are running iMac G4 Mac OS X (10.3.5).
This post states iMac G4 Mac OS X (10.2.x).
What type of install did you do, to go from 10.3 to 10.2?
Is there a Previous System Folder on your HD?
When you discovered your Memory Problem, which OS X were you using?
Have you tested the new RAM?
Sorry for all of the questions, but I'm trying to lay some groundwork, to assist readers who may be able to help you.
When posting a question, it is best to divulge as much background info as possible.
All of your problems, seem to me, to be somehow related.
Good Luck!
ali b

Where have my photos gone?

I recently had a problem with Aperture resulting in me having to uninstall/reinstall it. All projects in the last 18 months and photos have been deleted! Previously, it was not syncing with Iphoto, so the photos weren't there. Now it has synced but is not showing these photos. These events are still on my Ipad, which I am now reluctant to sync with my Imac, as I am converned that they will disappear also. Any ideas how I can sort this mess out?

You do not mention, what kind of trouble shooting measures you already have done after reinstalling Aperture?
Just to be sure, have you checked the filters in Browser and Library inspector, if you are really showing all library items? The filters should be displaying "All items" or "Showing All". And did Aperture open your current library, and not create a new, empty one?
And have you repaired and rebuild the library after reinstalling Aperture? If not, try the First Aid Tools, see:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Previously, it was not syncing with Iphoto, so the photos weren't there. Now it has synced but is not showing these photos.
What do you mean? iPhoto on iPad or iPhoto in iLife on Mac? Have you migrated your Library from iPhoto? And how are you syncing? With iTunes or Wi-Fi? Please explain in more detail.
The filters to check:
Reagrds
Léonie

Oh where oh where have my calendars gone?

I am running Calendar v6.0 (1648) on two different machines running 10.8.4. For some reason, Calendar will not display my Gmail calendars on my rMBP no matter how I configure the CalDAV account...I have spent 8 hours on this problem, and even re-installed OSX to no avail. Can someone **please** help me bring my google calendars back to the Calendar.app??? I am exhausted from searching and trying different things (cleaning out caches, deleting plist files, deleting/re-installing accounts, re-installing OSX...nothing seems to work ).
I was shocked to see that on my brand new mac mini (the other machine running 10.8.4), I set up the google account exactly the same way and presto blammo my google calendars populated just fine.
There has got to be a corrupted preference file somewhere that I am missing
I have tried these steps as well as these and even played with sync services troubleshooting on apple's site.
I should mention that the OSX re-install was in place; so whatever is causing Calendar to biff was not fixed by the OS itself.
I'm completely puzzled and exhausted now...please let me know if I can provide any diagnostic data. Console reports correct creation of the google account in Calendar.app, but my calendars still won't show up

The account seems to add just fine...and 'Gmail' shows up in the sidebar (with show/hide as appropriate upon hover); however, none of the calendars actually load...Calendar remains a blank slate. I verified the behavior on my "working" copy of ML, in which the calendars loaded almost instantly from Gmail's servers.
Since last week, I have performed a bottom-up reinstall of OSX. I know the Migration assistant is convenient when upgrading and/or moving machines, but my [corrupted] preferences had been migrated 3 times across OSX versions and new laptops (baseline: Snow Leopard). I can only imagine that something was lost in translation.
My new installation feels a lot snappier, and I believe I have even been freed of a puzzling anomaly that I also could never answer: Spotlight was always re-indexing Macintosh HD whenever I logged out/rebooted the new ML install...I use spotlight nearly exclusively for launching applications. With the buggy migration settings, I always had to wait upon logging in...even applications didn't show up in Spotlight's results. Now, in the "bottom-up" re-install, that wait is over, and I can access applications through Spotlight almost instantly upon login (phew).
I had always wondered how many times I could actually "migrate" my data across system upgrades without losing efficiency. In my case, that number appears to be 3. Sure, re-installing everything is a bit tedious, but all of my labor-intensive efforts (read: applescript) translate easily with a 'sudo cp' command from an archived profile. Needless to mention...the modern conveniences of iCloud and cloud-synching applications make things so much easier.
From this point forward, I actually have a Time Machine available for backups. This, also, will probably speed up a bottom-up reinstall, should the need arise in the future.
Let me know if anyone comes up with any further ideas...but from my point of view, the "damage" has already been rectified, and I'm on to greener pastures. I still have the buggy [migrated] profile on a bootable disk if anyone wants to try solutions...

I must be stupid... Where have my playlists gone?

Similar Messages

Maybe you are looking for