I must have a setting wrong on PSE 10. When I use selection tool and select color, it is always blue. What am I doing wrong?

I must have a setting wrong on PSE 10. When I want to fill a selection with color, I choose the color but it always comes up blue. What am I doing wrong?

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

Similar Messages

HT1414 I am new on the iPod 5th Gen, I have managed setting up ok, I can send emails via Mail but cannot seem to receive them ? help what am I doing wrong

I am new on the iPod 5th Gen, I have managed setting up ok, I can send emails via Mail but cannot seem to receive them ? help what am I doing wrong

Try this...
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.

HT4191 Notes between my iPhone and Mac are not syncing. I have an iCloud account, and Notes ar turned on... what am I doing wrong. Everything else seems to sync just fine.

Notes between my iPhone and Mac are not syncing. I have an iCloud account, and Notes are turned on... what am I doing wrong??? Everything else seems to sync just fine.

Hi morganfromwalla walla,
Notes is turned on in iCloud on both the device and the Mac?
Cheers,
GB

Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.

Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.

There are two ways that should work. When you are in the trash folder, you can swipe on the email in the list - left to right - and a red Delete button should pop up. Or you can select - Edit - at the top of the list of messages and then select the message and tap delete.
Not sure exactly how this works - but if you have restrictions enabled - especially since you let your grandchild use the device - that may be restricting what you can do in the mail app. Go to Settings>General>Restrictions. If you have it set to on - turn it off or see if you have mail restricted.

I am at starbucks and when I try to download my free music on itunes, my password is always rejected, even when i am forced to create a new one!!! what am I doing wrong, who do I ask for help

I am at starbucks and when I try to download my free music on itunes, my password is always rejected, even when i am forced to create a new one!!! what am I doing wrong, who do I ask for help?

Due to recent security issues and identify theft (mostly due to phishing scams), the iTunes Store seems to be requiring more frequent verification of credit card information when a card is registered in your account, even if you have a balance from a prepaid card. Either just go through the verification process or, if you have a credit card entered and you don't expect to need the card anytime soon, go into the Payment information in your account and set the payment method to "none" which should then stop the regular requirements for verification (it may still ask - mine does - but you should just be able to click through the buttons without problems).
Hope this helps.

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

When I connect my canon Hd vixia to upload media. My windows start moving around franticly and I hear this ticking sound. What am I doing wrong?

Loging & Transfering
When I connect my canon Hd vixia to upload media. My windows start moving around franticly and I hear this ticking sound. What am I doing wrong?

Hard to tell from here. This would be a first.
How is the camera connected and is it or anything else touching your keyboard?
x

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked. What am I doing wrong?

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

I am trying to copy songs to an sd card for a digital photo frame. I changed my setting in iTunes to mp3 format before I downloaded the song but it didn't work. What am I doing wrong? Any suggestions? I would be very grateful!

I am trying to copy songs to an sd card for a digital photo frame. I changed my settings in iTunes to mp3 format before I downloaded them but it did not work. What am I doing wrong? When I play the sd card in my mac or on a lenovo laptop it works but not in the photo frame. I would be grateful for any ideas as to what I am doing wrong.

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

HT1146 Just started using Apple mail. Trying to set up email folders with Company/Company P.O. and it won't work. Went to Edit and added special characters and it still won't work. What am I doing wrong or can this not be done.

Just started using apple mail. Trying to set up email folders with example: Company/Company P.O. It won't let me do it. It will not allow / or . . What am I doing wrong or can this not be done. I tried to use the Edit menu and adding the special characters, but it still won't work. Please advise. mmather

In Aperture using the external photo editor Adobe photoshop elements 10 editor. My photo will not come back to aperture unless the photo is saved on the desktop and then imported back to Aperture. What am I doing wrong?

Using Adobe Photoshop Elements 10 Editor as external editor in Aperture. The issue is once i make the changes in Photoshop it request that I save (use tiff) and the photo is not update in Aperture. What am I doing wrong?

Marianne,
how do you save? Photoshop Elements can save either versions or overwrite the original file, afaik.
You need to set the save preferences, so that it will write to the original file and not write a version. Also the filename extension should be "tiff" and not the default "tif" (I think you did that already).
Regards
Léonie

I just installed JCE on my new CF10 and now can't login to administrator, what am I doing wrong?

I have CF 10,284568 installed on SUSe 12.2 with Java 1.7.0_15 64bit. When I swap out the two JCE files, restart Coldfusion, I can no longer login to the Administrator. To be more specific, it appears session management isn't working. If I login using a bad username/password pair I get an error, if I login with the correct pair I get returned to the login screen without any error. Additionally, none of my datasources work (MySQL ). If I swap out the original (local policy and US export policy jars) and restart everything works fine.
What am I doing wrong? Do I need to run something in the CF bin or reinstall to get this to work?

I tried to repro the Issue :
Here are my findings ,
Case 1 )
CF with Java 1.7.0_25
On top of it Install UnlimitedJCEPolicy JDK7
Restart Server
Everything works fine
Case 2 )
CF with Java 1.6.0_29
On top of it Install UnlimitedJCEPolicy 6
Restart Server
Everything works fine
Case 3 )
CF with Java 1.6.0_29
On top of it Install UnlimitedJCEPolicy JDK7 ( Basically wrong version of Policy Files )
Unable to open administrator !! And DB’s won’t work as mentioned above
Case 4 )
CF with Java 1.7.0_25
On top of it Install UnlimitedJCEPolicy 6 ( Basically wrong version of Policy Files )
Unable to open administrator !! And DB’s won’t work as mentioned above
Can you please check if you are applying the right version of Policy Files ? Or Am I missing something here ? Can you also try with the latest Java and latest CF Update ?
Regards ,
YASHAS RATTEHALLI
ADOBE CF Engineering Team

When I sync through my computer my calendar appointments are duplicated. What am I doing wrong?

When I sync my iphone4 through my computer, all my calendar appintments are duplicated.
What am I doing wrong? What should I change in itunes to stop this?

This must mean the answer to my question is yes.
Turn off automatic syncing - iTunes preferences under the Devices tab - select prevent iPods, iPhones, and iPads from syncing automatically.
Under the Info tab for your iPhone sync preferences with iTunes, deselect Sync Calendars followed by selecting Apply.
On your iPhone, go to Settings > Mail, Contacts, Calendars.
Select your Exchange account.
Turn Calendars off for over the air syncing.
A warning message will be provided indicating this will erase all calendars/calendar events downloaded from and being kept synchronized with the Exchange Server. If you are also provided a prompt to save the calendar events locally on your iPhone, decline this prompt.
This will not erase the calendar events synced direct with Outlook on your PC via the iTunes sync process.
Follow this by turning Calendars back on for over the air syncing with your Exchange account on your iPhone. You should be provided a merge prompt and if so, accept the merge prompt.
This will get rid of the duplicates.

Real newbie-I can hear my loops in my library, but when I drag them to a track, there is no audio. What am I doing wrong?

Real newbie question-I can hear the loops in my library, but when I drag them to a track, there is no audio when I playback or record. What am I doing wrong?

You probably put Midi loops (green) on audio tracks, and audio loops (blue) on Midi tracks.
That won´t play.
JanD

Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!

13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff

I must have a setting wrong on PSE 10. When I use selection tool and select color, it is always blue. What am I doing wrong?

Similar Messages

Maybe you are looking for