I nedd the detailed Specifications for the R6868 cable
I'm building myself cables for Eseries DAQ boards, and I don't know what type of flat ribbon cable I need,
what AWG value, etc, etc?
thanks
DAQboy,
I know that it is a 30AWG Stranded, TPE. But, since you are asking for very detailed information, I would suggest to contact NI engineers.
Ask and Engineer!
Similar Messages
-
More Detailed Specifications for ASA 5585-X
Hi:
Does anyone know about a document in which is specified who may ACE rules are supported in an ASA5585-SSP-20?
I need to compare this an other several specification versus a FWSM. I found the information for the module, but not for the ASA 5585-X..
In the data sheet this information is not specified
Thank you very muchHello Marco,
That is because the FWSM does have a limit, I have not seen any limit on the ASA, The asa does support way way way more than the FWSM, I have not seen any limit yet but I have heard that it will let you know as soon as is full of ACL's or you will start seeing a degradation of the performance. Anyway dude you have an 5585, that is a giant and amazing box You are more than safe.
Hope this helps
Julio -
Detailed specs for Cinema HDD 23-inch -- different from older models?
I am having trouble finding detailed specifications for my new 23" display to use for running X.org. I need to know the timings for each resolution, as simply specifying the resolution does not work. The best I've found is here:
http://www.gubbe.ch/linux/dev-cinema23.php (the gray box at the bottom lists the detailed specs to put in the file)
However, this is for the older model of display with ADC and not DVI. I'm not sure if these will work with the new model, and I'm afraid to try because it used to be that one could really mess up one's display by specifying the wrong timings.
Does anyone know if the specs have changed between the older and newer models, or where I could find new specs, or help setting it up to run under X.org?Actually, those Modelines from the web site work fine, at least for the generic nv driver. I'm having trouble getting the proprietary one from nVidia to work though. I'm working with them on this: http://www.nvnews.net/vbulletin/showthread.php?t=70630
The problem I am looking at right now are these lines from my latest Xorg.0.log file:
(WW) NVIDIA(0): No connected display devices detected; assuming 1 CRT
(WW) NVIDIA(0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce3 Ti 500 at PCI:1:5:0
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 03.20.00.16.10
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are not supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce3 Ti 500 at PCI:1:5:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1920x1200"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
This is my graphics card saying, "I can't see what sort of monitor has been plugged in, so I'm going to assume it's a CRT," and then from there it messes up. It can't tell my monitor is plugged into the DVI port. I'm not sure if this is my monitor's problem or my card's problem. The monitor is plugged in directly--the cable coming from the monitor is plugged right into the DVI port--but I'm not sure if Apple did something silly like, say, converting that DVI connection into an ADC connection before having it interface with the monitor's hardware. Any insight about this would be appreciated.
Anyway, I tried that timing you gave me with the proprietary driver. It didn't work, but I doubt that's because the timing is incorrect, and has more to do with the fact that my card can't seem to see the monitor. -
Details report for the retropay by element process
I have ran retropay by element and i would like to create a detail report that will show me all the entries for a specific retropay element.
For example i have Basic salary and the retro element for this is Basic Salary Arrears
When the retropay by element process runs from 01-jan-2010 to 01-jun-2010, I am getting 5 Basic Salary Arrears elements attached to the employee on the element entries window and when i click on the Entry values button i can see Pay Value for each Basic Salary Arrears element the difference is only on the Original Date Earned.
It appears as follows:
Basic Salary Arrears
Pay Value= 142.95
Original Date Earned=31-JAN-2010
Basic Salary Arrears
Pay Value= 142.95
Original Date Earned=28-FEB-2010
Basic Salary Arrears
Pay Value= 142.95
Original Date Earned=31-MAR-2010
Basic Salary Arrears
Pay Value= 142.95
Original Date Earned=30-APR-2010
Basic Salary Arrears
Pay Value= 142.95
Original Date Earned=31-MAY-2010
Now i want to create a detail report for all these elements based on the Original Date Earned so that i am able to know for how many months of Basic Salary Arrears has been paid to all staff.
Please help me!When i go and view the message in View >Payroll Process Results window. I can see the following error:
The element RETRO_OVERTIME65 being retropaid must have a link effective at the date of the RetroPay (Assignment Number 8842)
Please note RETRO_OVERTIME65 is a Non-reccuring element and i have included it while defining my Element Set.
But this element is not attached in the pay period that i am trying to process my retropay by element run so does that mean that it will throw the following error due to this ?
The element RETRO_OVERTIME65 being retropaid must have a link effective at the date of the RetroPay (Assignment Number 8842)
Appreciate all your assistance/advice.
Edited by: 594647 on Jan 18, 2010 7:35 PM -
Please update the functional specifications for Vendor Balance Report
Dear All,
Please update the functional specifications for Vendor Balance Report with
proper descriptions.
Please include
1. How your selection screen should look like..
2. Output format ( in an excel sheet)
3. Logic for every field in the output format (viz. .. how do link the
vendors from the selection screen to the BKPf and BSEG tables, how do you
find open and closed items in BSEG , etc.)
Please avoid statements like 'The total value of all the break-up should
tally with the balance as shown in FBL1N for a given vendor for the given
day.'
You need to give the logic for the FBL1N, in that case.
Regards
Rama MohanHello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft -
How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.
you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900. -
can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?
Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.
-
I Want to buy an external solar battery charger for my iPad 2. Does anyone know the right specifications for it.
Is this one good for me ? 12000mAh Portable Solar Power Battery Pack. You can find it on this link.
http://dx.com/p/12000mah-portable-solar-power-battery-pack-with-laptop-cellphone -adapters-72218?item=37
Thanks.The iPad charger is rated at 10W - 5V @ 2A An iPhone/iPod charger is rated at 5W - 5V @ 1A. An iPhone charger will charge the iPad, but much slower than the iPad charger. Based on the specs, I don't think it's adequate for the iPad.
Cheers, Tom -
"Missing most detailed table for dimension tables" eror when I run the Global Consistency check
ERRORS:
Business Model DAC Measures:
[nQSError: 15003] Missing most detailed table for dimension tables: [D_DETAILS,D_EXECUTION_PLAN,D_TASK].
[nQSError: 15001] Could not load navigation space for subject area DAC Measures.
I am also attaching my Business Model layer for easy understanding. I have a fact table and several Dimension table. I got this error only after creating the following hierarchies:
Execution Plan -> Tasks -> Details
Start Date Time Hierarchy
End Date Time Hierarchy
Is there a solution for this problem? Thanks in advance!Yes ! My Task Hierarchy has 3 dimension tables that form a hierarchy :Execution Plan -> Tasks -> Detail
All the 3 levels in the hierarchy are 3 different dimension tables. -
My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help. I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% mds
0% fontd
0% mds_stores
0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
Error in the specifications for area 01 in ch.of dep
Hi,
In our business scenario there are two different chart of depreciation which are Spain and Morocco. Spain has currency EUR and Morocco has MAD. Spain asset CWIP process has done successfully but Morocco has the problem found. While doing actual settlement through KO88 for CWIP asset settlment, one error is being occured as "There is an error in the specifications for area 01 in ch.of dep.
Message no. AC385
Diagnosis
You specified that depreciation area 01 should take over values or depreciation terms from itself. This specification is incorrect.
Procedure
Correct the specifications for area 01.
Best Regards,
Samrat RoyIt seems you have kept 01 as TTr in OABD for depreciation area 01
If the 01 is real depreciation area, do as below
Go to OABD
Depreciation area - 01
TTr should be 00 (You should not keep anything other than 00 here)
Thanks
Edited by: nkonnipati on Mar 2, 2012 5:59 AM
Edited by: nkonnipati on Mar 2, 2012 5:59 AM -
how can i increase the font size on Safari and email so my mother who is legally blind in left eye, right eye 50% vision. r there any apple product specifically for the blind?
From the Safari menu bar click View > Zoom In or press Command + on the keyboard to increase the size of the page.
If that doesn't help, open System Preferences > Accessibilty > Settings then select Zoom on the left.
You can also increase the resolution on the dislplay. System Preferences > Displays > Display > Scaled
You can also get help by posting in the Apple Support Communities > Vision forum here. -
OAK3 error message - Specifications for the mean value methods incorrectly
Hello experts,
After golive of sap ECC system of our client, when the auditors check the consistency of depreciaion areas in transaction OAK3, the error message is appearing under the depreciation area 01 as "Specifications for the mean value methods incorrectly defined". Can anybody throw some light on how to encounter this error message?
ThanksHi,
1) Usually, the reason why the error occurs is that you have no area defined in the chart of depreciation.
2) Also please check the attached note 847289.
3) Please also run OIB5 and check if capitalization version is assigned to depreciation area 01
If you use capitalization versions it is necessary to have a depreciation area with area type 07 (Cost-acc. valuation) which
get the whole amounts.
The depreciation area which takes the values to 100 % must have the following features:
=> The currency of the depreciation area should have the currency of the controlling area
=> The depreciation area should have the depreciation area type "07 Cost-acc. valuation"
=> The area should not have a capitalization version
regards Bernhard -
How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.
I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
Peter -
I am using a HP CapShare 920 handheld scanner and I would like to download documents onto my mac. I purchased an IR778 usb port adapter specific for a mac, downloaded the required app for this. The mac recognises the ir778 but will not recognise the scanner. Now it works fine on my netbook, yet I can not read the files they are so small. I am looking for some help so I can use my much preferred mac.
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
Maybe you are looking for
-
Why does power nap time machine backup not work on my August 2012 macbook pro retina?
Hello. I got a MacBook Pro with retina display in August of this year 2012. I have done the SMC ? firmware update and I have 10.8.2 installed on my machine. Power nap still doesn't seem to work. I have the button in energy saver preferences and I hav
-
Is it all the data on the iphone is deleted when iphone is in Recovery Mode?
is it all the data on the iphone from the past is deleted when iphone is in Recovery Mode? or is there anyway i can manage the data from the past when my iphone is in Recovery Mode? or is it when my iphone is in Recovery Mode, all the data from the
-
Hi, I am exending an iExpenses VO and am getting this error: "Each row in the query result columns must be maped to a unique query attribute in the mapped entity columns" I am trying to add 2 columns to the SQL query and get this error on the Attribu
-
Pas d'onglet scroll motion dans effets
Bonjour, dans ma version (v4.1 Build 8) il n'y a pas d'onglet "scroll motion" dans "effets". Comment puis-je la trouver?Merci
-
How do i purge the cache so i can see an update to a webpage?
i updated my webpage but firefox keeps trying to display the old page