I need a Banner at Login with MARS 6.0.5?

I need a Banner at Login with MARS 6.0.5?  How do you create a banner?

In MARS go to "admin" tab, "system parameters" and click on "banner settings."
Dustin Suko

Similar Messages

  • HT203433 I downloaded apps with one appleid on my iphone.  When my account was disabled I set up a new appleid & account.  Now I cannot update apps on my iphone that were downloaded with original appleid when I login with my new apple id.  What do I need

    I downloaded apps with one appleid on my iphone.  When my account was disabled I set up a new appleid & account.  Now I cannot update apps on my iphone that were downloaded with original appleid when I login with my new apple id.  What do I need to do?

    You can write into support and ask for help reenabling the account through this link here:
    http://www.apple.com/support/itunes/contact/
    Since the applications were purchased on the older account, you will need to log into that account to update them. The newer account will not recognize the purchases because they are not a part of the purchase history for the specific account.

  • Isync will not login with new mobile me, need to change from .mac

    I have been trying to sync but my old .mac user name and password are not working now with mobile me. Shows that login is valid but I get an error message - There was a problem with the sync operation. .Mac login failed. I assume that I need to change the login address from .mac to a mobile me address. Any ideas out there? Apple has nothing on this problem.

    Patience. MobileMe is a mess.
    When Apple substantially modified .Mac Sync to support extended attributes available with the introduction of Mac OS X 10.5, and simultaneously dropped support for for the most part for Mac OS X 10.3.9, it was three weeks until normal service was restored. And even then, most of the issues individual users had with .Mac sync prior to the transition were still present.
    If you value your data, back it up and wait for an announcement from Apple that it works as expected.

  • Apple tv 2 problem: I can not login with my ID account!!!!!

    apple tv does not login with my ID! Do you have a solution? Since a few weeks I can not login in with my password...
    I tried everything:
    - re-starting apple tv.
    - login on macbook with my apple ID with new password

    Signal Strengh on WiFi was great (its a new Apple Time Capsule and has to be reset often).  Checked the internet connectivity on other machines too (incase that was inop).   I checked the network first as that is typically a impediment to all other things working prior to my previous comment.  I logged in to iTunes and MobleMe to see that my password was correct and working.  hmmm.
    I reset the Apple TV next and again changed my iTunes password on my laptop, then ran a network test (which needs a itunes password to work).  Network check was successful and I am logged back in.
    Now it says...."Netflix is currently unavailable. Try again later".
    geez.

  • I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESK

    I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER  IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
    I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
    PLEASE PLEASE HELP ME .Creative Cloud Connection

    Hi Alfred,
    I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
    1) Go to Start button>> Control panel>> Uninstall a program.
    2) Check if you see Browser safeguard there, if yes then uninstall it.
    3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
    -Ankit

  • Can't Login With Network Account After Upgrade To Yosemite Server 4

    I've been putting off this troubleshooting for a while now, and after trying everything I could find, decided to post.
    - After upgrading my server to Yosemite with Server 4, and my MacBook to Yosemite, I can no longer login with any network accounts.
    - I was on clean installs of Mavericks before the upgrade.
    - I'm using SSL for the OD, with a GoDaddy cert, the same one that was working on Mavericks.
    - I've tried removing the laptop's binding using the Users and Groups preferences dialog, which does not remove the laptop's entry from Open Directory, so I manually deleted the record on the server.
    - I then choose to Join again, and it looks as though everything goes through, but I still cannot login with a network account.  Also, when rejoining, it does not create a binding on the server.
    - If I use the Directory Utility->Services->LDAPv3, and add it that way, entering the FQDN and checking Encrypt..., Use for auth and Use for contacts, it asks me for the directory admin username and password, and does in fact create the binding on the server, but I still cannot login.  What's strange about that method, is that it forces the use of the IP address of the server, rather than the FQDN, like I entered it, which would of course have problems, because the certificate's common name is the server's FQDN.  It does not allow me to change from using the IP address, graying out that field.
    - I've also tried destroying the OD and restoring from archive to no avail.
    It looks like many users have hit dead ends with this, with some having success by completely formatting and setting up a new iteration of the server, but I will not be doing that.  However, I'll be happy to try any other suggestions.
    Thanks for your time,
       -- Mike

         Okay, I've finally resolved the issue, thanks to the Apple Enterprise tech support team.  I'm thinking they wouldn't mind if I share this information, but I can't guarantee that this will work on your system or, worse yet, degrade your system further.  However, that's fairly unlikely, just make sure you have plenty of backups before you begin any troubleshooting session.
         So I was told to perform the following instructions, which I did, line for line.  The part about closing Server.app seems a given, but I'm not sure why they want you to open Server.app at the the end (maybe taken out of context from some other instructions?).  I did it anyway, but you should be able to begin testing, on a client workstation, right after rekerberizing is complete.  I did, however, need to reboot my client, login as local admin, and then binding would proceed, and network users are able to login again.  The engineer also let me know to expect an error, something like the following: "2015-03-11 21:58:38 +0000 Error synchronizing removal of attribute draft-krbPrincipalACL from record 72519e4c-7ac7-15e4-bd42-10adb1944cbc: 77013 result: 16 No such attribute" - this is apparently normal, and did in fact happen in my experience.
    So here's the fix:
    - Quit Server.app (don’t just close the window)
    - On the Open Directory Server, execute these Terminal commands:
      - sudo mkdir /var/db/openldap/migration/
      - sudo touch /var/db/openldap/migration/.rekerberize
      - sudo slapconfig -firstboot
    - Open Server.app
    And that's it.  I did nothing else on my OD server, just logged out.  Immediately tried binding on my MacBook client, it failed, I rebooted, tried again, it worked quickly, and I'm able to login with network user accounts again.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • HT4759 i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

    i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

    An update.
    From iCloud Control Panel 2.1.1 for Windows
    "iCloud Control Panel 2.1 and later includes support for Windows 8"
    but you still need to set it up on a Mac or iOS device, "Note: To create an iCloud account you need an iPhone, iPad, or iPod touch with iOS 5 or later, or a Mac with OS X Lion v10.7.5 or later."

  • HT2589 I have an Apple ID which I had registered years back. I wanted to use the same Apple ID to download apps - but whenever I try to login with that Apple ID, it tells me "  "This ID hasn't been used with Itunes", and proceeds to let me "Review" it.

    I have an Apple ID which I had registered years back.I wanted to use the same Apple ID to download apps on my ipod touch - but whenever I try to login with that Apple ID, it tells me "This ID hasn't been used with Itunes", and proceeds to let me "Review" it. In the last step, I'm asked to furnish credit card information, which I don't want to, since all I want to do is to be able to download free apps !!

    Could the credit card be expired?
    Beyond that, what you need to do is contact iTunes support, they can tell you exactly what is wrong, none of us here can do that.
    In the lower right corner of this page is a 'contact us' link. Click on that and you'll see a page full of info and links, one of which is iTunes support.

  • How to conf  in Hyperion, so the system couldn't login with the same user

    Hai.....
    how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
    rgds
    uka fp

    fane_j wrote:
    Sally R. wrote:
    Someone gave me a suggestion to go to the terminal and type in the following:
    ls /Users/Shared/.*.so
    This was published on MacWorld's site, and it's not a very good tip. Try this instead
    ls -la /Users/Shared/*.so
    Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
    By bastion
    Fri Feb 24 08:49:05 PST 2012
    PeterSParker said
    Your terminal statement has an extra "." in it that prevents it from working.
    Also, you should add the options -alR to show what is happening, and to search subdirectories.
    The revised command looks like this:
    ls -alR /Users/Shared/*.so
    The above is completely wrong. The command as shown in the article is appropriate.
    The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
    Because you're explicitly searching for things that start with "." you don't need the -a flag.
    Because you only care about simple existence and not any metadata you don't need -l.
    Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

  • I just bought a brand new iPhone 4s from a Three store. When I used the cloud restore to put the data from my old 3gs onto the device, it's prompting me for an Apple ID login with an email address that isn't mine!

    I just got a brand new iPhone 4S on a contract from my local Three store. When I used the cloud restore to put the data from my old 3GS onto the device, it's prompting me for an Apple ID login with an email address (hotmail) that isn't mine! My old phone has NEVER had any Apple ID other than mine log into it, and the new one's a sealed box that I've opened and set up from scratch. Can anyone please explain this? I'm worried there's some kind of problem with my iCloud data being mixed with someone else's or something... Since I logged in with my own ID, it's downloaded the data perfectly fine, but I just got the Apple ID prompt again a moment ago with this same hotmail address in it... I'd be very grateful for any explanation!

    In iTunes on your computer, select the Purchased section under STORE in the left column. Click on the first track and choose "Get Info" from the "File" menu.
    In the "Summary" tab you'll see details of the purchaser of the track. Click Next to go through all your purchased music one by one until you find the ones you need to get rid of.
    Unfortunately, there are no smart playlist rules that can filter tracks by the purchaser that I know of.

  • Help needed in making a login screen

    hi all,
    i need to make a login screen in flash in which a user enters
    a password and username and both are checked from an xml file. i
    need your help in making it. could anyone redirect me to some
    tutorial or if anyone can post the code here, i would really be
    grateful to you. thanks,
    gaurav

    First you need to load the xml file that contains the list of
    user names and passwords into variables using actionscript.
    Use this tutorial.
    http://www.actionscript.org/tutorials/intermediate/XML/index.shtml
    Then compare the value entered by the user with the list of
    usernames and passwords.
    But be aware:
    1>All the processing happens on the client machine
    2>Extremely insecure if you are after a secure login.
    3>and when you update the XML file it won't necessarily
    take effect immediately on all the user's machines as they may be
    using a cached version of it.
    Ideal method is to use server side validation script using
    asp, asp.net, jsp or php.

  • Problem in CMC login with SAP authentication type

    Hi,
    We have installed the SAP Integration kit successfully for BO XI R2 & when I logon to CMC i am able to enable the SAP authentication and import the roles from the SAP BW system as well. But when I try to login into CMC using the 'Authentication type' as SAP it doesn't display the textboxes for entering  System ID and Client details. Can you please tell me how to fix this?
    Also I see that the CMC & Infoview authentication type drop down list are not the same. The CMC has the authentication types available as 'SAP,LDAP & Enterprise' where as Infoview has 'Enterprise, LDAP & AD'.
    Is this an issue with the Plugins? do i need to do some settings on the Tomcat ?
    Please help me out in this..
    Thanks in advance!
    Phani.

    Thanks for your update Jac...yes thats correct. Also I had to include authPlugExt.properties file in the tomcat/shared/classes, which i did not include previously. The SAP infoview is working fine now.
    Just one more question, in CMC login doesn't the SAP authentication require sap system & client id as its inputs? (in XI R2). I noticed that I was able to login with SAP user id's (without mentioning system details) , that have been added when I have imported the SAP roles to BO.

  • Login with id and pw

    I login with my id and pw to the web page http://www.mycomp.com/DATA/db/index.cfm?action=edit
    If I open another browser tab, I need to login with the same id and pw again.
    How to make my index.cfm keep track of the fact that I had already logged in?
    Any hint or related tutorial will be much appreciated.
    ColdFusion version is 6.1.
    I think I should do it with session variables so I am looking at:
    http://www.adobe.com/livedocs/coldfusion/6/Developing_ColdFusion_MX_Applications_with_CFML /sharedVars5.htm
    The HTTP session is captured as follows:
    http://www.mycomp.com/DATA/db/index.cfm?action=act_proposal_edit
    POST /DATA/db/index.cfm?action=act_proposal_edit HTTP/1.1
    Host: www.mycomp.com
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
    Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 115
    Proxy-Connection: keep-alive
    Referer: http://www.mycomp.com/DATA/db/index.cfm?action=edit
    Cookie: pmycomp-id=198.103.196.130.1282935108536569; CFID=32002; CFTOKEN=56751797; __utma=163983085.57742683.1284751128.1284751128.1284751128.1; __utmc=163983085; __utmz=163983085.1284751128.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none)
    Content-Type: application/x-www-form-urlencoded
    Content-Length: 59
    act=editProposal&Proposal_ID=928&Password=xyz12345&submit=Login
    HTTP/1.1 200 OK
    Date: Thu, 23 Sep 2010 13:38:41 GMT
    Server: Apache
    Content-Type: text/html;charset=iso-8859-1
    Transfer-Encoding: chunked
    http://www.mycomp.com/css/base-institution.css
    GET /css/base-institution.css HTTP/1.1
    Host: www.mycomp.com
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
    Accept: text/css,*/*;q=0.1
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 115
    Connection: keep-alive
    Referer: http://www.mycomp.com/DATA/db/index.cfm?action=act_proposal_edit
    Cookie: pmycomp-id=167.33.55.107.1281364460396256; __utma=214597780.1670341042.1281367441.1285182047.1285186388.34; __utmz=214597780.1285182047.33.12.utmcsr=www.mycomp.com|utmccn=(referral)|utmcmd=referral |utmcct=/DATA/db/index.cfm; JSESSIONID=F5E2381CF84FCA6E53ACAC9878A658DE; __utmc=214597780

    Take a look at the "Securing Applications" section of the CF docs.
    http://livedocs.adobe.com/coldfusion/6.1/htmldocs/appsecur.htm
    You may wish to use the CFLOGIN and related tags/functions to secure your site.

  • Problem in login with sys

    hi,
    i have a problem in login with sys, the situation as follows:
    1- when i try to connect using : sqlplus "/as sysdba" or "sys/password as sysdba" it connect me to the DB.
    2- when i try to connect : sqlplus "sys/password@MYDB as sysdba" it gives me "ORA-01017: invalid username/password; logon denied".
    3- when i try to connect with another user i.e : sqlplus "system/password@MYDB" it connect me to the DB.
    DB version : 9.2.0.8
    OS version : Solaris 10
    please advice...

    1- when i try to connect using : sqlplus "/as sysdba"
    or "sys/password as sysdba" it connect me to
    the DB.This works anyway, because you're authenticated by OS. Example :
    SQL> conn sys/aaaa as sysdba
    Connected.
    SQL> conn sys/bbbb as sysdba
    Connected.
    SQL>
    2- when i try to connect : sqlplus "sys/password@MYDB
    as sysdba" it gives me "ORA-01017: invalid
    username/password; logon denied".Here you need the real password, so make sure you're using the correct one.

Maybe you are looking for

  • Printing to a shared printer on a windows XP PC

    Hello all, I switched last March. I've been doing pretty good at dealing with all the bumps in the road, but I got one I can't figure out. My roommate and I moved in together about a month ago. We were going to share my printer. I decided to plug my

  • Email PDF Form and Sign Entire Submission - Can this lock the form and show the signature?

    Thanks to those who explained how to create a button that allows me to email a form as a PDF rather than XML. It helped me a great deal. Now I want to cause our time sheet adjustment form to be emailed from the employee to their supervisor, and have

  • I need Information on this intresting OBJECT

    On a monthly basis, after all data has been fed into One Source and the monthly One Source calculations have been performed, an extract will be run from One Source , converted via XI and loaded to BW.  The current plants that will be extracted from O

  • Hide folders in Files view

    How would i go about hiding certain folders in my files panel, preferrably in remote view. I can cloak folders in the remote view but i'd also like them to be invisible in the filepanel.

  • Vendor registration

    Hi experts After vendor replication from EBP to SUS an e-mail notification is sent to vendor with a URL, USER and Pass, when vendor goes to URL and do the registration and try to create an error occur, CALL FUNCTION NOR EXECUTABLE, INCORRECT PARAMETE