I Need a Car Mount That WORKS!!

I've been through two car mounts...the iOttie that Apple.com sells, and another bought at BestBuy. Both encountered the same problem in my car...
I need the mount to stick to a plastic surface that is curved. My first failed attempt had a sticky suction cup...it was not sticky enough and the suction cup does not work on plastic.
I'm desperately trying to find a good solution...any recommendations?

HI Peter,
I would recommend the Tackform Ultra Grip.. One thing I want to point out is that most of the quality sticky suction cups will still stick to a slightly curved surface. The issue many people run into is that the actual dashboard material is porous and over a few hours or days the air slowly seeps through and you lose suction. In this case there really wouldn't be a good direct to dash suction cup solution for you.. The Tackform Ultra Grip comes with an additional 3M pad that you can use first but many people don't like putting any type of adhesive on your dash.
If you're looking for solid. The Ultra Grip locks on super tight to surfaces. It has a bigger suction cup than most mounts out there.

Similar Messages

Good iphone car mount that works with case?

I need a car mount for my iPhone so that I can use the phone's GPS app. I've looked around and so far I can only find mounts that work for iPhones without any case.
I would rather not have to remove the case everytime I got in my car, so are there any recommended mounts out there that work for phones with cases?
Thanks!

Griffin makes an FM/lighter mounted model, which has several bottom mounting brackets, to fit several phone models. I tested it out today, but the ipod buttons on the model don't work correctly, and FM was spotty to awful, as always on these type of setups. It did hold my naked cellphone well, and wish it had worked as advertised - cost about $100 at Best Buy.
Belking has a similar model (about $70 at Best Buy), without the FM transmitter, also on a lighter stalk, which may work, since it grips the top of the phone with a wider clip, made to adapt to case thicknesses, I presume. I have not tried out this model, but may do so, since I have never found a single FM transmitter that works well - too much static, fading in and out, etc.
Is there anyone who can recommend a lighter mounted (on a flexible stalk) charger for the iphone, that has a stalk long enough to accommodate any rental car, I would very much appreciate it.

Need PHP send button that works

I have a Flash website with a web form that I cannot get the
submit button to work. I was able to create a button for reset to
work, which I will post that action after the one for my form. I
have an instance of web form (which I placed onto my contacts page)
created with onsetfocus code and this is the parent form t1_2 and
this is the code I have assigned to this form.
t2.onSetFocus = function() {
if (t2_2 == "your name") {
t2_2 = "";
t3.onSetFocus = function() {
if (t3_2 == "e-mail") {
t3_2 = "";
t4.onSetFocus = function() {
if (t4_2 == "phone") {
t4_2 = "";
t5.onSetFocus = function() {
if (t5_2 == "comments") {
t5_2 = "";
HERE IS MY RESET BUTTON CODE THAT WORKS (please help me
script a PHP submit button that works based on what I have listed.
Sample of the website can be obtained here
on(release) {
//_parent.t1_2="";
_parent.t2_2="your name";
_parent.t3_2="e-mail";
_parent.t4_2="phone";
_parent.t5_2="comments";
VIEW SITE
HERE

I am new to Flash and I am working on similar website but I
have a cfc that returns all the main categories from sql server. Is
there a way that I can dynamically create buttons with the
categories returned? And when the button is clicked the
subcategories need to be displayed as labels. Is this possible? Did
anyone develop something like this before? Is there any sample code
that I can refer?

Car charger that works with the bumper case?

Does anyone know which, if any, brands of car chargers and models that work with the new bumper case? I went to best buy yesterday and they all looked too thick to even buy it and give it a try.

I'm pretty sure the lack of functionality with car chargers and the bumper case is simply because the cutouts for the USB connector on the bumper is too small..that's the only reason. Otherwise it will work; it's simply a physical problem with the connector not seating properly; that's it.
I'm saying this based on my own situation. I have a Griffin car charger /FM receiver that worked with my iPhone 3G and it worked with my iPhone 4 until I put the bumper case on.
The situation is the same situation as to why the Apple supplied USB cable that shipped with the 3G does not work with the iPhone 4 w/bumper. Apple redesigned the size of the USB connector and sized the cutout on the bumper for their new smaller size making the bumper not backwards compatible with existing devices with the older size USB connectors. The size differential is not that big but it's big enough to cause problems.

Need External DVD Player that Works on Mac

My G4 fell (ouch) and the right corner bent and the DVD player doesn't work anymore. At Best Buy I bought a LG DVD player and burner, but my G4 wouldn't recognize it. Then I bought a Pioneer DVD player and burner, but it wouldn't recognize that either (this one has a place to plug in a cord to power it from the wall, but it didn't help).
Does anyone know of an external DVD player and burner that will work with a Mac G4? They seem to all be well under $100, a lot cheaper than having a Mac repair person open up my G4 and try to fix the internal player and also replace the shell.
BTW, I guess I could get by without a burner, so if you know of just a player that would work with my G4, I would consider it. Also the LG player says on the box it works with Mac, but then I noticed it needs OS X 10.5 . I suppose it costs over $100 to upgrade, so I don't think it's worth it.

All PowerBooks starting the G3 "Pismo" dating to Feb 2000 have Firewire Ports. On the 17" G4, the FireWire 400 port is the only labeled "2" in this image of the right edge of the computer:
!http://km.support.apple.com/library/APPLE/APPLECAREALLGEOS/HT2369/862835.gif!
FireWire is an Apple trademark for the IEEE 1394 interface. Other companies will usually use the IEEE designator to avoid mentioning Apple.

Need a download scheduler that works over a number of days

I have tried Download Plan. Either I don't know how to use it or it doesn't work properly.
Facts:
1) Because of various factors I have to download between 00:00 and 08:00 my time.
2) If I am lucky I get 3 GB in that time.
3) Sometimes I need a file that is larger than 3GB.
4) So I need to schedule: start pause resume pause resume pause resume pause ... up to to 7 or 8 days.
5) If I click on the download in the status bar and select "pause" I must be able to:
a) Switch user
b) Disconnect from the Internet
c) Log off
d) Shut down
e) Switch on and log on as a different user.
f) .........
6) If I come back 2 weeks later from a holiday in the Seychelles I must bge able to switch on, log on, go to bed. At 00:03 the download must resume. Not from 0 bytes, byte from the 7.3GB that have already been downloaded.
Looking forward to replies. :-)

Ninad,
I just peaked into this, looks complicated. We also have a requirement (not about the finance charges) to something about this statements.
If I find a way, I will post that here.
Thanks
Nagamohan

Need dock extender cable that works with bumpre case

Hi,
Putting a bumper case on an iPhone 4 completely resolves the antenna issue (at least it has for me). The problem is that third party dock connectors such as my car charger won't work with a bumper case because the bumper case is made to exactly fit an Apple manufactured dock cable and the dock housing on my charger is to big to fit. Does anyone know specific extender cables (manufacturer and part number) that will work when the phone is in a bumper case?
Thanks,
Rob

I Had the same problem , went on this site to purshase dock extenders and cables
http://gizmomix.com/shop/accessories/2-extension-dock-extender-adapter-for-iphon e-5-5s-ipad-lifeproof-otterbox-case/
http://gizmomix.com/shop/accessories/dock-extender-adapter-extension-cable-iphon e-5-5s-otterbox-lifeproof-case/

I need set of API that works only in Flash player debugger version but not in Flash player non-debug

My Application does not have any Sampler API, trace , getStackTrace methods, still its not working. My application has HTTP calls to server side ,

Thank you so much for your time! Okay, I think I have what you need, if I understood it all correctly. Here goes...
I just installed FP again, did not get the video showing on Adobe site that it was successful even though the download said it was.
Uninstalled using Adobe uninstaller, then tried install once more with the same result.
The macromed Flash folder still has the same files as listed before:
Flash10i.ocx
FlashInstall (text doc)
FlashUtil10i_ActiveX.dll
FlashUtil10i_ActiveX
install (text doc)
In Control Panel I see:
Adobe Download Manager
Adobe Flash Player 10 ActiveX
Adobe Reader 9.3.4
Adobe Shockwave Player 11/5
Showing & enabled in IE Add-ons:
get_atlcom Class
Shockwave Flash Object
Adobe PDF Link Helper
Adobe PDF Reader
The Active X Control for Flash Player is not listed in IE
Don’t see any relevant add-ons in Firefox. BTW, I don’t usually use FF and only downloaded it again because I’d read that FP was working for some people in FF when it wasn’t in IE. So, if we don’t get FF working with FP I’m good with that.
No NPSWF files in the Flash folder for me to right click.
Can't give you any version numbers.
Did I miss anything?

Need HP Print driver that works with OSX Lion 10.7.4

I recently got a new modem and I need to update my SSID and password on my HP wireless printer. The printer software that came with the printer and on the hp website for the printer only supports Mac OSX and doesn't work for OSX Lioin 10.7.4
Is there a way to get software that could update my printer or should i remove and somehow reinstall the printer with different software?
Kids need to print their homework....help!

No reason to be sorry,
You should use the Setup Assistant to reconfigure the wireless connection:
Make sure the printer turned on and connected to your Mac by USB.
Go to Applications\Hewlett-Packard\Device Utilities and follow the HP Setup Assistant. it will guide you to connect the printer to your new router.
If you can't find the Hewlett-Packard folder you will need to install the HP software by selecting the HP Recommended Software, the software van be found in the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-107372- 1&cc=uk&dlc=en&lc=en&os=219&product=5061092&sw_lang=
Regards,
Shlomi

Need an App. uninstaller that works with Leopard.

I need to clear space on my MBP hard drive and upgrading it's internal drive is way too expensive, if you want to preserve your warranty. (Apple Stores won't do it!) I have an external drive, but I'm trying to use it as little as possible cause its a pain to carry around and set up, plugs and wires etc. So I need to find a good, Leopard compatible, application uninstaller. There are too many to choose from: Clean Sweep, CleanApp, AppZapper, Forklift etc.
What has anybody tried, and what are you happy with, and what seems to find all those pesky hidden files?
I know Leopard is an issue because most of the above apps make mention on their sites of issues they are having when working with Leopard.
Any advise would be greatly appreciated.
Thanks, John
Message was edited by: John Walker

AppCleaner, it's free but just as good as the others.
http://www.freemacsoft.net/AppCleaner/index.php

Is there an in car camera that works with iMac

I recently bought an in - car camera only to discover that it is not compatible with my I-mac. The store assistant said that there are no cameras on the market which are compatible with I-mac

What brand and model of camera did you buy?

Need to create .MP4 that works with iPhone/iPad

Hi all,
I'm under the gun here and running into a wall and would appreciate anyone's help:
I'm currently creating video content that's being hosted on an HTML5-based site. Because of this, we have specific requirements about what we can/cannot use for formats.
The most acceptable format is an MP4 wrapper with H.264 encoding and AAC audio.
However, the files that are currently deployed won't play on iPhones or iPads (iOS).
The HTML5 standards guide states that: "Mobile phones like Apple’s iPhone and Google Android phones support H.264 video (baseline profile) and AAC audio (“low complexity” profile) in an MP4 container."
I don't know what a "baseline profile" with "low complexity" audio is.
When I look in Compressor, there are settings for iPhone and iPad, but this makes an .m4v file.
Is the only way to support web video on iPhone/iPad with an .m4v file?
If it can support .mp4, what program/settings should I use to ensure playback?
Thanks much!

Still would like to know if this can be done in Compressor.
Can you select the ipod/iphone preset and just change the extension to .mp4? Will this make an MP4 with H.264 encoding as "Simple Profile"?
And I'd love it if someone could define what "simple profile" and "low complexity" means?

I need a media player that works?

Hi,
I have so many problems with Banshee I am thinking of going back to good old mpd
What the best front end for mpd at the moment?

noriko wrote:what you need is amarok my friend
AmaroK is nice, but the question was
Mr Green wrote:What the best front end for mpd at the moment?
To Mr Green: if you want just simple mpd client try glurp or gmpc.
Sonata and Pygme are nice too, but I don't like Python.

I need a preloader bar that works :]

I use codes like this to load movie clips into a loader.
However, i cannot figure out how to create a preloader that
will show its progress, since most BAR tutorials are for AC2.
Can someone tell me how to do this with AC3?
Thank you.

You're not listening for the PROGRESS event...read the docs
to see the Events
addEventListener(Event.COMPLETE, completeHandler);
addEventListener(HTTPStatusEvent.HTTP_STATUS,
httpStatusHandler);
addEventListener(Event.INIT, initHandler);
addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
addEventListener(Event.OPEN, openHandler);
addEventListener(ProgressEvent.PROGRESS, progressHandler);
addEventListener(Event.UNLOAD, unLoadHandler);

Need a dictation app that works with no internet connection

I frequently find myself without an internet connection on my iphone 5s using the latest iOS but I need to dictate to text. It seems all apps require some sort of cellular connection. Do you know of anything I can use instead? I LOVE Siri but she is not available when I need her. Thank you.

@macnpchz
Sorry both Siri and Dictation requires internet access. Have you tried troubleshooting you internet issue? View the link provided below to assist you
iPhone cellular data connection issues - Apple Support

I Need a Car Mount That WORKS!!

Similar Messages

Maybe you are looking for