I need a disc for a wireless model BEFW11s4
I bought a model BEFW11S4 wireless router off ebay it didn't come with a disc could someone help me or copy one one for me. I have a version 4.
(Mod Note: Email address removed. Use Private Messaging instead.)
Message Edited by kent07 on 06-09-2009 10:09 PM
You can configure the router manually if you don't have the disck to setup your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Similar Messages
-
How do I get recovery disc for HP 2000, model 2000-2c29WM
I need recovery discs for my HP 2000, model 2000-2c29WM
This question was solved.
View Solution.Hi:
To order recovery disks for your model, click on the link below and then click to expand the line labeled Order Recovery Media.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5360... -
HP Photosmart 309 Need installation disc for my fax
I need a disc for my HP photosmart 309 all in one Can you help me?
HI JackiC,
I see that you're looking for install disc for your printer. I would try downloading the drivers below.
Hp Photosmart 309a
Let me know how it goes. -
I have a older ipod and i need a charger for it the model
help please i have an older ipod and i need to find a charger for it please help model number m8541
So, if that is your iPod model, and you have a computer with a FireWire port, which even the current Macs do not have anymore, the cables are commonly available. However, the one to get depends on the type of FireWire port you have on the computer. The two likely types are 6-pin (older FireWire 400) and 9-pin (newer FireWire 800). Your iPod has the 6-pin (400) port.
Apple-centric vendor OWC has a selection of all types
http://eshop.macsales.com/catsearch/firewire+1394+cables
If your computer has 9-pin (800), you need a 6-pin (400) to 9-pin (800) cable. If it has 6-pin (400) that looks like the port on the iPod, then you need 6-pin to 6-pin. -
Need some suggestion for Demantra Shape modeling
Hi All
Can any one sugesst me how to create a Demantra Shape modeling using 7.2 version. I am working on a POC which includes shape modeling.
Thanks
RamKim,
Tttt yyyy pppp iii nnn gggg slowly.
You described your situation quite clearly.
As you probably know the digital inputs on the USB-6008/9 are software timed, so you have some uncertainty in the time of any sample. Depending on your OS that uncertainty will typically be on the order of a few milliseconds but occasionally may be much longer.
To count the pulses in software requires a combination of several things.
1. You need to have a data acquisition method which is fast enough to capture each high and low state of the pulses produced by the pump. For software timed Digital Input a good way to do this is to have an independent, parallel loop which reads the input line rapidly and passes the data or transitions to another loop via a queue. This is known as the Producer loop in a Producer/Consumer architecture. Examples come with labVIEW. A 10 ms Wait in the loop is probably appropriate.
2. You need to convert the digital inputs (levels) into pulses or transitions to be counted. Suppose you want to increase the count by one every time the logical level changes from False to True. To do this you need to know the previous level and the current level. A shift register is one of the best ways to do this in LV. Add a shift register to the loop. Initialize it to False. Connect the result of the Digital Read to the right terminal of the shift regsiter inside the loop. When that Read is True and the previous value (obtained from the left terminal of the shift register) is False, increment the count value (which is also kept in a shift register) in the case structure.
3. You did not indicate what you are doing with the counts or what the pulses represent. Do you need to measure the frequency (or the period which is the reciprocal of the frequency)? Do you need to accumulate the number of pulses? Over what time period?
Lynn -
My hard drive crashed and I need system discs for 20" iMac early 2006
My iMac hard drive crashed. I need original start up discs. When turned on it shows a folder with a question mark on it. I had upgraded it to 10.6 Snow Leopard.
Hi
You can get Snow Leopard start up disc via Amazon, if you want to chance it ( link below for Amazon page. ) Personally I would phone the Apple help line to see if they can provide you with a set of disc's it much safer.
snow leopard disc amazon -
Need replacement disc for Creative Suite CS3 Design Standard
My hard drive on my MacBook Pro is crapping out on me and refuses to let me make a full bootable backup so I can replace the disk. Problem is that I've foolishly managed to lose my physical disks for Creative Suite CS3 Design Standard so I can't do a reinstall. Can anyone on the forum help? Thanks in advance.
If you still have your serial number somewhere, you may call Adobe Tech Support and provide them with the details that you have. If you are really nice to them, they may send you a replacement disc. Good Luck.
Hisham -
Hi Can somebody tell me where I can get a factory recovery ISO for x201. My hard drive has crashed and I need this to install on a new drive. Thanks, Shiva
Windows 8 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&tmp_task=solveCategory&cc=us&dlc=en&lc...
Creating Recovery Media >> Windows 8
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Need Vista driver for Bluetooth dongle model: TechBlue1
Hi,
I recently got given a Technika Bluetooth dongle, model: TechBlue1 and it isn't supported by Vista.
Is there any updates or drivers that will allow this?{color:#800000}*The Technika TechBlue 1 dongle uses a TOSHIBA Bluetooth stack. It will only partially install under Vista and there is an incompatibility warning box. I have been unable to find the Bluetooth stack version number. Is there a patch or fix or Vista driver available, please Toshiba? This dongle is sold by TESCO, one of the biggest UK supermarkets and there must be a large number of these dongles in circulation.*
{color} -
Urgent Help Required for Unified wireless network help
Dear Community
i need urget help for a wireless unified network setup to deploy it in a college
actually what is the senario for this network that i have a WLC 5500 and 12 lwapp 1252 series APs for this deployment ant there is allready an existing lan
network to connect with it the new wireless unified setup.
here is above proposed topology .
i need help for this setup like
i know the basic configuration on controller to do but i really do not know that from GUI what steps i need to configure on controller for each access points as you can see above i have three floors for building and i want to configur three SSIDs like Employ,contractors and Guest for each floor and how to configure encryption type and shared key for each SSiD.
and what i have to configure for APs to join them with controller
and hoe to configure RF grouping for each floor.
please i need urgent reply because i have tp finish this all setup in one weekonly
thans in advance.Hi,
Wat ever you want.. the below link has everything.. Just click on the stuff that you neeed fro mthe menu and this will do it for you!!
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70.html
1>> Configure WLANs.
2>> Configure AP Grouping.
Regards
Surendra -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
Hi, I Am Trying To Upgrade My Mac Mini To Snow Leopard And I Have Brough The Retail Disc That They Sell On There Site. The Instructions Say To Insert The Disc And Follow The On Screen Instrutions But When I Put The Disc In; It Spins The Disc For About 30sec - 1min Then It Ejects The Disc. If There Is Any Information You Need To Get A More Clear Picture Please Ask
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
Open Activity Monitor>Disk Usage tab, Show:>All Processes, sort on CPU%, how much Free Space is used? -
Where can i get new install discs for my macbook 2008 alluminum model
I seemed the misplaced my discs for my macbook early 2008 unibody (silver), i just got a new hd after my old one died and need to install the OS obviously. I was wondering where i would be able to acquire some discs? I have got my sisters discs from her macbook pro from late 2011, the OS version is 10.6.3 but they dont seem to want to install, i get an error before i can begin the install that says something along the lines of "not able to install this software on this macbook".
Would i be able to buy the OSX snow lepoard disc from the apple website?and would that work perfectly or?
Any help would be much appreciated. Thanks!
edit: just looking at the model/build page and i found this:
MacBook (13-inch, Aluminum, Late 2008)
Oct 2008
10.5.5
10.5.6
9F2088, 9F2533, 9G2133
that is my model.Call Apple using the appropriate phone number on this page. They may make a small charge for the new disks.
Best of luck. -
I need a new recovery disc for my MacBook help ASAP!!!
I need a new recovery disc for my MacBook so I can format and re-install the default operating system. I have lost the original recovery disc that came with my MacBook years ago. Can anybody tell me how and where I can order one from?
Also, I do have the original recorvery disc that came with my MacBook Pro, could I not just use this or would it not be compatible?
Help ASAP please...
Thank you!For a fee, you could likely order a replacement install-restore DVD for your MacBook. To get the correct disc(s) and match the hardware to the system, you need to know and have the serial number of the product handy, and be able to answer some basic questions; and have a form of payment, such as credit card.
Call the Apple Store online (main US number, 1-800-MY-APPLE) or the main Apple Support number for US, 1-800-275-2273.
Or if you're in another country, you could try calling a Local in-country support number and ask, since they may have to redirect your call to another associate. See link below for Support phone numbers.
An operating systems specialist or other qualified person will be able to try & help obtain the correct disc or disc set; if the computer original gray-label set is no longer available, they may be able to check their extensive database against your product serial number to see if they may have another full install disc that can work.
This other option, if it happens, based on your MacBook serial number and build model identifier, could be slightly newer than the OS X version shipped with the MacBook, and not be gray-labeled.
A replacement install disc in retail version would not include any original MacBook applications, while a gray-label disc set should have most of them as part of a multiple DVD set, if available.
•Contact Apple for Support & Service
http://support.apple.com/kb/HE57
Hopefully this helps resolve the issue.
Good luck & happy computing! -
I need a copy of a disc for the wrt54g im have trouble ge...
I need a copy of a disc for the wrt54g im have trouble getting on my wireless router i was on and now i dont please help me
Go here to download your Linksys Program. This is more up to date then the CD anyway. You can always make a CD with the program too.
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=116685983731...
Maybe you are looking for
-
Adobe AIR Installer - Hybrid - fails to launch on MAC
We have an AIR application to be delivered as a hybrid DVD The AIR is deployed as a bundled runtime installer. The issue is after burning the DVD as a hybrid, the Adobe AIR Installer does not launch. We are using toast to burn the hybrid DVD Has anyb
-
What does a startup upgrade internally?
Hi, Does some know what "startup upgrade" in Oracle 10g internally does? In the alert log I see the following: ALTER SYSTEM enable restricted session; MMNL started with pid=12, OS id=3872 Fri Jan 22 10:26:35 2010 ALTER SYSTEM SET systemtrig_enabled=F
-
Enhancements in Outbound IDoc Processing
Hi, How do I find the function module where the Outbound IDoc structures are filled. Basic type: SHP_OBDLV_SAVE_REPLICA02 Message type: SHP_OBDLV_SAVE_REPLICA Thanks, Regards, Morten
-
As I program the 3D Picture Control, my mind is always in need of the infamous XYZ Axis definition graphic with 3 Vectors definiing the axes on the display to ease my thinking. Does anybody have one or is there a property or soemthing that I can sh
-
Can i activate adobe software without an intrernet connection cs6
Can I activate adobe cs6 software without an internet connection?