I need a download for desktop software 4.2 or 4.3

I'm totally frustrated after an hour of hard looking for the software.
Yes I know you don't support it any longer but some of us in the real world still need that version because it links with lotus organizer 6.0 and earlier.
All the google links that I had the time to try all link to the blackberry download site which of course stops at v4.6
It sure would be nice if the bbry software had more backwards compatibility but I digress
Would someone please send me the address where 4.2 or 4.3 can be had?
Thanks!

You've posted your question in the Welcome and Introductions section.
RIM no longer supports Desktop Manager 4.2 or 4.3.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I need the old Blackberry Desktop software 6.1 for PC Urgently!!!!

I upgraded to the 7.0 software as prompted by the auto-upgrade setting. But it did not work for me! It was stuck at the last step forever. I did it over again 3 times, and it did not work. I restart the computer, recovered my system to a few days ago. And my 6.1 software was still not working. It showed an error.
I went home, bring out the installation disc from my Torch package. But it was a mini-CD and point me to download the 7.0 software! Every attempt to reinstall or repair the old 6.1 software were "Rolled back".
I have never been so ferious with Blackberry EVER!

Richmondmac wrote:
If I remove the new version 7, should I try to reinstall a prior version from the link above? If so, which one? I have a BB9700.
From your PC > Control Panel > Add/Remove Programs, remove your current BlackBerry Desktop Software.
Reboot your PC (Start > Turn off , etc)
Upon startup, download this file: 610_b034_multilanguage
Install that file by double-clicking on it and following the prompts.
Now, try your normal sync. You MAY need to setup your Desktop Software SYNC parameters to Outlook again as before.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have found a person who has a driver software to connect Labview with PCI card. But he says that i need to download a freeware software to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ??

I have found a person who has a driver software to connect Labview with a general PCI card. But he says that i need to download a freeware software from NI website to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ?? Is there any other way out ??

I would ask the person who told you about the freeware software to help you find exactly where it is. I am not aware of any freeware software for configuring motion PCI cards but maybe the person you know might be able to help you locate it.

I need the download for Adobe Photoshop CS4

I need the download for Adobe Photoshop CS4

I am following the same instructions, and the downloads work for me. However, the first file downloaded is a "_LS1" file, and has no extension. The second file is a .7z archive. The instructions for how to install this download in the "exact instructions" phase says to "run the .EXE file" but there is none.
Also, when I rename the _LS1 file to add the .exe extension, it can be run, and extracts an installer to the desktop. Unfortunately, when I run the setup.exe in this installer, it "gets an error and must quit" and asks that I contact Adobe support. Adobe support sends me here. I paid for this software through so many upgrades, and when time came to upgrade to CS6, they suddenly didn't want my money, so I'm stuck on CS4, which now doesn't work, and Adobe won't talk to me?

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

Need a download for Illustrator CS4

I need a download for Illustrator CS4. I have a valid serial number but the disc seems to be damaged.

CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

HT5766 Where can I find the size of a download for a software update now?

Hello,
Where can I find the size of a download for a software update now?
Since I upgraded to Mountain Lion (Mac OSX 10.8.3) this information is no longer available in software updates listing you get if you click on the Software Update menu item from the Apple menu.
I found the download size (often hundreds of megabytes for an individual update and sometimes a set of updates might amount to a few gigabytes) to be very helpful, and now that it seems no longer available (I can't even see it on the web page I came to for more information, thinking the download size would surely be specified there), it is frustrating. My current example is iTunes 11.0.3
I would greatly appreicate having this information back in the software updates listing, but since it is no longer available there, and I don't know where else to find it, if anybody can enlighten me to its whereabouts, I'd be grateful.
Thanks and cheers!

stewedapples wrote:
I would greatly appreicate having this information back in the software updates listing, ...
You can leave Feedback for Apple here...
http://www.apple.com/feedback/
stewedapples wrote:
... I don't know where else to find it...
http://support.apple.com/downloads/#

Need softwear download for the W995. All my data\ files lost in post during a move.

Need Softwear download for a W995. All my data and files was lost in my move to Brazil.

Ich würde ja gerne antworten, aber ich verstehe leider kein "ENGLISCH" !?!

What verson of java do I need to download for Mac OS X 10.5.8?

What version of Java do I need to download for Mac OS 10.5.8?

Since August 2012 updates for Java (and especially Java Runtime Environment, which is what you actually need) must now be downloaded direct from Oracle:
http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1637588.h tml
Further information here:
http://www.oracle.com/us/corporate/press/1735645
and their FAQ’s:
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/mac-faq.html
However, if you need the Jave 6 JRE and plug-in, MadMAC0 has posted at
https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182
Apple has also posted (Oct 22/12) the approved solution for restoring the Java 6 plug-in:
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.
Interesting article here on why Apple removed Mac browsers’ ability to run Jave Applets:
http://www.techweekeurope.co.uk/news/apple-java-browser-mac-os-x-96827

I need the download for the Security Update for Shockwave Player Active X 12.0.3.133

To Whom It May Concern,
I need the download for Adobe Shockwave Player Security Update for Shockwave Player Active X 12.0.3.133. So far all I have got is the run around. Please can someone help me get this update for my laptop?
Sincerely,
Lisa Newman

Is there a reason you need this SPECIFIC build? Because I was unable to locate it in three different places I looked.
There are FULL installers here: http://www.adobe.com/shockwave/download/alternates/#sp (version 11)
12.0.4.144 is here: http://get.adobe.com/shockwave/otherversions/

The download is for Windows. I have MAC OS X 10.9.1. I need a download for that system, please.

The download is for Windows. I have MAC OS X 10.9.1. I need a download for that system, please.

are you using the mac (not windows) serial number?
if yes, http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html

What software do I need to download for a Sony XDCAM HD deck?

I need to ingest media from a Sony XDCAM HD deck. What software/drivers do I need to download? I believe it is a log and transfer app. Any ideas?
Thanks much.
Best.
Tom

Just for future reference, AJA has a free app called "AJA VTR Xchange" that would capture just fine for you. It would probably capture directly from the camera, also.

Can't install downloaded Blackberry Desktop software

I downloaded the latest version of the BB 8100 desktop software from the BB site to my computer. It unzips OK but when it starts to install it stops every time. Have exited every Windows program first. Any ideas?

Problem:
Similar but not the same as errors 2738 1607 encountered with installing blackberry desktop manager software, there is no error message here, simply the WinZip Self Extractor completes, then the Installshield Wizard opens and appears to be installing. After several seconds, a BlackBerry window opens (BlackBerry Desktop Software - Installshield Wizard) with the message: "The wizard was interrupted before the BlackBerry Desktop Software could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again.    Click Finish to exit the wizard.
Solution(s)
Ok, saw this thread was un answered so I thought I would reply in case anyone out there has this issue too, it drove me mental for a week too. (before you read on I am not responsible for any messed up computers, blackberries or anything at all! This is a GUIDE that worked for me and not the law!) So, here we go… I tried many many things to fix this, I am on Vista home, berry 9700 bold 2, TELUS Mobility (doesn’t really matter), Blackberry handheld OS 5.0, Vista Desktop Manager 5.0.1. English without media manager/roxio w/Sp1 downloaded from blackberry. I tried just about everything you can imagine, know my way around computers reasonably well (or so my mom tells me haha) and uninstalled the previous version of desktop manager with REVO uninstaller etc...
Some of the other things I tried that did NOT work for me but MAY WORK for you are as follows, what ultimately worked for me was step C and all sub sections of, I might start there but I am writing this in order of things I tried.
Solution A) un/re registering vbscript.dll (in c:windows\system32) to no avail…click start, run cmd prompt (should open as admin),
1. Start à Accessories à right-click Command Prompt and select Run as Administrator. A Windows Elevation confirmation screen will pop up. Confirm the action OR alternatively just run CMD from Start àrun à cmd and it should run as admin
2. The Command Administrator Prompt opens to something like the following- C:\Windows\system32>. If anything else change directory by typing this without quotes: “cd\windows\system32”
1)     Now at the command prompt, which should be- C:\Windows\system32 unregister the vbscript.dll file from Windows by typing at the command prompt (without quotes) “regsvc32 /u vbscript32.dll” (This will un-register the VB Script dll with your computer. A confirmation window will appear after this)
2)     Now we want to register it C:\Windows\system32 regsvr32 vbscript.dll (This registers VB Script with your computer -- a confirmation window will appear after this as well.)
3)     Try rebooting and running your blackberry software install
Solution B) Everything on this site : This Blackbery Forum Post (great post, thanks! Hey, you might learn something here that will come in handy one day if it doesn’t help you now, I did)
Follow each step there, try rebooting and running your blackberry software install as indicated
Solution B.Longshot) If A and B don’t work, you can try a repair of vista using the recover cd (if you don’t have one go here: neoSmart (I downloaded and burned image with aShampoo dvd burning software, restart windows with DVD/CD in the drive, press F12 on boot (or whatever gets YOU into ‘setup’, not the BIOS, change boot first device to CD/DVD ROM. I used this and it works perfectly, just follow their directions on the site and pick the right version for your OS etc) be *VERY*CAREFUL to NOT wipe your drive and just do a REPAIR (can take an hour), again if you don’t know what you are doing, skip this one and move on.
What DID WORK for ME, is the following (SORRY FOR THE CAPS BUT THIS IS IMPORTANT *** DO NOT ASSUME THAT USING AN UNINSTALLER LIKE REVO WILL DO ALL OF THIS FOR YOU - THIS WAS MY MISTAKE from the beginning, 25 hours later I realized that YOU NEED TO DO THE UNINSTALL AND SOME MANUAL STEPS EVEN IF YOU SELECT THE MOST THOROUGH***)
This one, D, worked for me specifically:
Solution D) Uninstall the BlackBerry Desktop Software, preferably using REVO UNINSTALLER go: HERE to get Revo (CNET)
Use the Advanced uninstall option, thorough option, the last one down the list, this will notonly use blackberry’s built in uninstaller, but scan for remnants of the software on your drive and registry
When prompted select all and delete everything it finds, do not skip any steps, reboot, try re-installing the blackberry desktop software
You could try a similar type of uninstaller if you have one; however, I don’t recommend leaving it to using the control panel add/remove programs, I did not try this with that method
Solution D part 2) Once you have uninstalled and rebooted
- Delete the Research In Motion Folders from the hard drive AND Registry
Browse to C:\program files\Research in Motion, delete this folder
Click Start à Run.
Type Regedit, and then click OK. (Please be careful here, only do this if you have a good idea what you are doing, you can really mess things up here, go slow carefully please please please)
In Registry Editor, delete the Research In Motion folder located at HKEY_CURRENT_USER\Software\
Delete the Research In Motion folder located at HKEY_LOCAL_MACHINE\Software\   (This key will supposedly be missing if you are removing Desktop Manager version 4.0)
Reboot, reinstall the Blackberry Software, issue SHOULD HOPEFULLY be resolved!! So there you have it. I am 99% sure one of those things will get you back on your feet....good luck,
Good luck
I can be reached at 6packs at live dot com if you spot an error I can fix, otherwise please post to the forums!

Lost CD to download 8703e desktop software- synching ms outlook calendar, etc- help!

What do I need to download so I can synch with ms outlook (calendar, etc). I'm trying to help a family member with his 8703e and I've never used a blackberry before. He no longer has the CD that came with the software. Thank you!

Greetings, and welcome to the BlackBerry.com Support Forums.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
I would recommend DM version 4.7 withOUT Media Manager for that model
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe air with flex, file new, open and save for Desktop software program

I already have a headache from all the searching. I cannot believe this to be such a confusing topic as every software program we create must be able to save user input, right.
Here is the problem:
Novel writing software program Main window has tabnavigator with four navigatorcontent pages 1. characters, 2. worlds, 3. objects, 4. Editor
Each navigatorcontent page has user input fields in the form of textinput component, textarea component, richtexteditor component, etc.
problem 1:
The user needs to be able to open a new project and give it a name and state where it must be saved. All user input in the Novel writing software program must be attached to the file name the user specified - cannot give sample code cause I don't even know where to start looking anymore.
Problem 2:
If the user has now defined a new project name, all his input from the different input components has to be compiled into a single file that can be saved. (Dan Pichelman gave me a satisfactory answer on using the file.borwseforsave funtion.) That makes sense, but I first need to get all the user input into that single file. I was convinced that it must be an xml file and that there would be a guide on how to do this but...
Problem 3:
This brings me to another problem. All the pages I've researched so far tell me how to load data from an xml file into a component, but not how to write the text from the component into the xml file. And this xml file cannot be the prefs file in the storage directory, it has to be named by the user and then after filling in all his text in the different tabs of the software, must be saved in this xml file and saved where the user chooses.
Problem 4:
now that the user put in his text and it is written to an xml file that he has named and set the path to, he goes on vacation and in two weeks opens his saved file to work on his project again. All the data that was stored in the xml must now be written back into the different user input components so he can continue working on his project, truth be told, there are some samles and tutorials on this subject, but again from only a single page perspective not a multiple tab perspective.
Problem 5:
Now the user has deleted and/or changed some text he put in when he started, he wrote some more text in the textareas and texteditor and he clicks the file - save button. The xml file or whatever needs to be used must be updated and saved with all the changes overwriting the old file.
Problem 6:
The data entered by the user will end up being a book of say 400 pages. This data will obviously be mostly in the richtexteditor component, so whatever method of saving is used, database or xml or whatever, needs to be able to contain all this data.
Thought, if you are working with for instance, microsoft powerpoint, it has multiple pages all containing different user inputs and when you click flie - save, it saves all that input into one file. When I as a user opens that saved file it loads all that content back into its place and I can change and manipulate the input and save it again. I would have thought this would be one of the first things adobe or any other software would teach as this is what sofware programs are all about. But alas, the tutorials on this subject for adobe air for Desktop application is extreeeeemely rare.
My promise is, if someone can help me with this or there is a tutorial out there that covers this properly I will write a tutorial on this for other newbies as I progress step by step.
Pleeeeeeease help this ignorant novice
Regards

to save a file you would do something like:
FileWriter fw = new FileWriter( fileName );
textComponent.write( fw );
fw.close();See the JFileChoose API for filtering files by extension. The API gives an example.

I need a download for desktop software 4.2 or 4.3

Similar Messages

Maybe you are looking for