I need a driver for sound blaster 5.1 VX for windows 7

Hi , i installed the vista driver in compatibility mode ?for my sound blaster 5. VX in windows 7 but i got a blue screen and in device manager there's a yellow exclamation mark in " multimdedia audio "?stating that no driver is installed . Please can someone give a link to download at least a compatible driver or basic audio . Thanks .

Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

Similar Messages

  • Driver for sound blaster 1024 win

    Hello id like to know where can i download the driver for sound blaster li've 024 for WinXp?thanks a lot?

    Duplicate post.
    Jason

  • Finding the ASIO driver for Sound Blaster ZS

    Finding the ASIO driver for Sound Blaster ZS
    And One More question
    Anybody are using the Guitar Rig (Guitar effect software)
    How to detect the Sound Blaster ZS sound card with WDM Driver

    shlomokg wrote:
    Hello,
    I am trying to use my Sound Blaster LX with the new Adobe Audition 2.0 with no luck.
    With the new version 2.0, Audition came with this ASIO solution that should make things easier.
    Somehow for me it does not work.
    Please advise, what should I do that Audition will work with my sound card?
    Thanks,
    Shlomo
    Perhaps Asio4All or USB-ASIO (LX not said to be supported) driver is needed to be installed to get a sort of ASIO support for that USB device.
    jutapaMessage Edited by jutapa on 07-2-2006 07: PM

  • Manual for Sound Blaster Live! CT4670 needed

    I'm looking for the manual of the Sound Blaster Li've! CT4670 card in English or German. Somebody has got this manual in PDF format or knows a source where I can download it's

    0Re: Manual for Sound Blaster Li've! CT4670 needed" CT4670 = SB Li've Value according to here,
    ?http://support.creative.com/kb/ShowA...=ws:,case=0846
    so using that here is a link to the manual,
    http://support.creative.com/manuals/download.aspx?nDownloadId=2386&prodName=Sound%20Bl aster%20SBLi've!%20Value%20User%20Manual

  • Windows Vista Driver for Sound Blaster 5.1 P

    I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

    Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

  • Driver for sound blaster pc

    I search drivers for sound blaster pc28. Thanks

    If you don't mind I would like some more information about this like:
    Your operating system and the model of your dell, along with how the prompt was presented--i.e. the driver installation program presented the error.
    Thanks
    Johnathan
    Computer & Network Technician

  • Need Drivers for my Sound Blaster X-Fi Fatal1ty for XP!

    7Need Drivers for my Sound Blaster X-Fi Fatalty for XP!S Hey all, I recently reinsatlled XP, but cannot find my installation disc for my Sound Blaster X-Fi Fatalty saound card. I went to the drivers page and had the automatic driver service find my device and install the relevant drivers but I'm getting the following error:
    [color="#ff0000"]Found new hardware - Audio Device on High Defination Audio Bus - Cannot install this hardware...
    I do have sound, but I';m obvisouly missing a crutial driver - the repair shop that reinstalled the XP OS told me that only the installation disc has this driver - where do I get it if I no longer have the disc?!
    Message Edited by sticker on 02-2-2009 08:28 [email protected]

    Hi Did you try Driver cleaner or sweaper before installing drivers? You might want try windows updated site first installed MS official creative driver that might help your issue there then reinstalled official [email protected]

  • New Driver Creative Sound Blaster Live! 24-bit 1.04.0050 WHQL For Windows x64

    This is the new  Official Audio driver  released by Creative for  Sound Blaster Live! 24-bit for Windows x64.
    You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found  here
    You have to boot in win98 or  winMe using a boot diskette in order to run the fix.
    enjoy 
    Markoul

    Quote from: Markoul on 22-May-05, 00:07:32
    This is the new  Official Audio driver  released by Creative for  Sound Blaster Live! 24-bit for Windows x64.
    You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found  here
    You have to boot in win98 or  winMe using a boot diskette in order to run the fix.
    enjoy 
    Markoul
    Have you actually tired it yourself?  I'm wondering if this is a workaround, or will this be the official solution.  I wouldn't mind trying it, but I don't want to mess it up for when the Official driver is released.

  • Software Installation for Sound Blaster X-Fi Notebook

    5Software Installation for Sound Blaster X-Fi Notebook[ Hello, I have searched through the sound blaster forum for an answer to my question, but have been unable to find it.
    I recently recieved a sound blaster x-fi notebook. When I inserted the unit into my computer, the drivers installed just fine and I am able to use it, however, when I try to install the software bundled with the product on disk, something goes wrong. To be honest, I have no idea what it is. The problem seems to be with the install wizard itself on the disk provided me, because the install progress gets to about 20% and freezes while installing the Creative Console Launcher. I'm not sure if I just need a new CD, or if it is a problem with the software itself and nothing can be done.
    If anybody can provide some insight as to what the problem is or how I can fix it, I would be very appreciati've.

    Hi,
    Glad that it work for you. I think someone is asking for feedback in that driver download thread. Maybe you can post your feedback there on how is it for your x-Fi Notebook with the new driver set. I believe there are others who would be like you and would certainly love to hear any good news. Everyone has always been posting on what's bad and what's not working, but i think we should also post to tell what's good and what's working.

  • Rear Channel Sound Volume Controller for sound blaster Aud

    Hi?Every body Wish you a wonderful new year 2008,?I am using creative sound blaster Audigy? sound card and the speaker system is creative inspire 5. I have the volume controller for front and center and subwooferbut i don`t have the controller for rear channel and the same time the rear channel is working with the low volume?not able to hear the sound from the rear channel but its working fine if i go near to the speaker i can hear the sound very lowi need to increase the sound for the rear channel?If any body know how to control the rear channel for sound blaster audigy could you let me know .... System Specifications:Operating System :Win -XP Sp2Memory : GBVideo Card :Ausus ATI Radian card?

    op
    ps.
    i want to add. some additional information, my 5. speaker doesn't have digital output, the line out for the sub woofer and centre are red and white line just like the same as the other speaker line, i don't know weather it will cause the front doesn't work or not, but i had read some post it said "In the <B>Creative Mixer</B>, be sure to <B>disable</B> the option for <B>Digital Output Only</B>, and set the number of speakers accordingly. For example, if you have a 5. channel speaker system, select 5.."
    if, i didn't change the creative mixer to "disable the option for digital output", will it cause the centre and sub woofer have no sound at all? plesae reply A.S.A.P. as i don't know weather it is the problem of the sound card or just a problem of the setting.....thanks alot.

  • Announcement: New beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma - 21st Jan 2011

    Hi all,
    There are new beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma. For those who are experiencing low volume with the microphone, download the corresponding beta to see if it hel
    ps.
    For Windows:
    Beta firmware for Sound Blaster Tactic3D Alpha
    Beta firmware for Sound Blaster Tactic3D Sigma
    For Macintosh:
    Beta firmware for Sound Blaster Tactic3D Alpha
    Beta firmware for Sound Blaster Tactic3D Sigma

    Hi,
    I confirm that the two files SBTA_PCFW_BETA_US_D0_0_2.exe and SBTS_PCFW_BETA_US_D0_0_2.exe are corrupted (not Win32 applications). The downloads do not complete and stop respecti'vely at .36 KB and 05 KB.
    Creative, you have to reupload the files on your webserver.
    Download done with XP and IE8.
    Bye.

  • Hardware IDs for Sound Blaster World of Warcraft Headsets

    Hi all, If for some reasons your WoW headset is not functioning as intended and you have gone through most or all of the troubleshooting steps, please do a check on the hardware ids of the headset. If the hardware ids for your headset is different, please get in touch with our Customer Support to arrange for an RMA. Hardware IDs for:Sound Blaster World of Warcraft HeadsetHardware IDs for:Sound Blaster World of Warcraft Wireless Headset

    Hi Krusekontrol,
    Please PM me your email address. We'll try to get someone from support to assist you with the RMA.

  • Sound Blaster XtremeMusic with AD_Ext - for what

    http://creative.com/products/product.asp?category=209&subcategory=669&product=4 066&nav=0
    This is the specyfication of XtremeMusic Card. It says it has a AD_Ext connector and other stuff. But where can I buy:
    http://creative.com/products/product.asp?category=&subcategory=6&product=4659
    or
    http://creative.com/products/product.asp?category=&subcategory=6&product=47
    ...in Poland or other european countries?

    PersiL,
    In the shop (here) click on Accessories and then Sound Blaster? - Accessories. For the internal dri've I think it's listed for pre-order at the moment.
    Cat

  • CMSS for Sound Blaster Z

    Hi All,
    Is there a way to enable a CMSS or to sterio upmix method for Sound Blaster Z soundcard,
    I found it rather disappointing since I'm using 5.1 setup (logitech Z-5500) I though it was an upgrade from X-FI Fatality series and found out there was no CMSS feature that comes with SBZ.
    Do we have a way to enable it manually, like a tweak or something?
    Thank you

    CMSS was superseded by THX TruStudio Surround, which itself was either superseded or renamed into SBX Pro Studio Surround. You'll find it on the SBX Pro Studio tab of the control panel, as the first checkbox.
    I personally prefer how the SBX version sounds compared to CMSS (which is just as well, since that's the only way I can really use headphones these days due to hearing loss). The only real limitation it has compared to CMSS is that you cannot specify it to simply do a dual-stereo or the like - it will always add a faux 3D effect to it.

  • Update for Sound Blaster

    Okay, so I have the most recent update(SBAX-PCDRV_LB_2_8_00) for Sound Blaster Audigy, when I try to install I keep getting an error message "set up is unable to detect a supported product on your system" so what gives here, is creative just playing games or what ?
    :angry:

    I have similar problems, not only on the front panel either. Basically many power spikes will rattle the card and cause all sorts of problems including the one you mentioned. Advice- power down before connecting or disconnecting anything.

Maybe you are looking for

  • How can I open P65 files in InDesign CC 2014?

    I have a folder of P65 files I need to open, but InDesign CC 2014 can't open them.  Is there still a PageMaker plug-in like there used to be in previous versions to do this?

  • Workload analysis setting

    Hi Experts, I want to check workload analysis.  i run T code ST03N for checkup day wise report, left corner Extend Total ->  click on days it will show  information  before two day. could you please help me where i can change the setting and get dail

  • Distiller crashes for certain user

    Distiller 6.02 runniing on 10.4.7 on dual G5. Distiller will not work for a certain user. Files appear to distil correctly but the PDFs never appear in the destination folder. When this problem occurs there are no error messages, but Distiller freeze

  • Knowledge Warehouse Installation

    Hello Experts, I am a beginner to KM/KW. I have a few very basic questions which i am not able to understand. Firstly, what is the difference between KW and KM. is KW a Subset of KM. basic difference.. Secondly,  Is there any document available which

  • ISE and Auto Smartports

    I am testing ISE and Auto Smartports and i got the execution of the macro via ISE working. However, it seems i MUST enable globally "macro auto global processing " before it the macro is really executed. I would like to avoid this, as enabling this g