I need a file splitter for .band files.

Most FILE TRANSFER services max out at 2GB.
That means, I need to split GarageBand files into halves.
What file splitters are available?
By the way Macsome Audio Splitter does not work on .band files.

potzbie wrote:
I need to split GarageBand files into halves.
ctrl-click the proejct file and use the compress option, then you could use Split&Concat to break the .zip file into smaller pieces:
http://loekjehe.home.xs4all.nl/Split&Concat/
(btw, if you have any locked tracks, that would contribute to a very large file that need not be so)
potzbie wrote:
By the way Macsome Audio Splitter does not work on .band files.
a .band file is not an audio file

Similar Messages

How do I reset the default file association for .bat files on Windows 8.1?

Windows 8.1 allows the user to change the file association for .bat files. I made the mistake of using this facility to change the default file association for .bat files to Notepad++. Now when I attempt to run a .bat file, the script for the .bat
comes up in Notepad++, instead of its being run as an executable file! All my .bat files are now useless. I tried finding a way to change this back to the original executable setting, including deleting Notepad++ from my system, but nothing
has worked.
There are discussions that I found on the Internet about this problem, and the solutions to which I was led have not worked either. Most of the solutions apply to Windows 7 or Vista, but not to Windows 8. There are a few solutions that purport to apply to Windows
8 and 8.1, but they do not work for me.
(Disconcertingly, some of the solutions presented for the problem that apply to Vista or Windows 7 and are dated as early as 2009, so this problem has apparently been around for some time, but Microsoft still keeps .bat files on the Control Panel facility that
enables the change to be made. I cannot see why, but there it remains.)
Can someone please help me change this file association back to the original setting for Windows 8.1? Remember, most if now all the links that address this issue are focused on Windows 7. I need an answer that has been tried and proven to apply to Windows 8.1.
Nothing I have tried works.

Hi,
For the issue, we can restore Default File Extension Type Associations through adding the registry entries.
1. Download the .reg file from the following link.
http://www.eightforums.com/attachments/tutorials/8025d1345781188-default-file-associations-restore-windows-8-bat.reg
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
2. Save the .reg file to your desktop.
3. Double click on the downloaded .reg file to Merge it.
4. If prompted, click on Run, Yes (UAC), Yes, and OK to approve the merge.
5. Sign out and in, or restart the computer to apply.
6. If you are logged in as a standard user and this still does not help, then have the administrator also merge the needed .reg file for the listed file extension or protocol below while logged into their administrator account.
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

How to create a file object for a file on Remote Server? UNIX

Hi all,
I am working on two servers A and B. BOTH ARE UNIX MACHINES. My java class exist on server A and executes on same server. The file that I need to process resides on server B. (Lets call it test.txt in MYTEST directory. So path will be /MYTEST/test.txt on server B) I need to do few things before I can process it:
1) Check if file exist
2) If it does FTP it to Server A. (I already know how to.)
For both of these tasks, I need a File object for that file.
My problem is that I am unable to set it up.
\\B\MYTEST\test.txt will not work on UNIX. I already tried that. (It only works on Windows)
I tried:
/B/MYTEST/test.txt ---- Does not work
B:/MYTEST/test.txt ---- Does not work
:B/MYTEST/test.txt ---- Does not work
B:MYTEST/test.txt ---- Does not work
All of these instances say the same thing: "File does not exist."
Any ideas? Please help!!!
-Chirag

I by no means want to sound belittling... so don't take me that way..
You need to understand the basics of files, and networks. You can't check if a file exists on another machine if you don't have a network protocol to communicate with. The reason \\ works under windows is because you are using an invisible (to you) network protocol. You probably know it as windows sharing. If your file were not shared under it's own name, that method wouldn't work (I'm assuming your entire drive is shared without a password... a horrible security flaw...but one thing at a time)
You can use FTP protocol to check if a file exists. You can either send the raw text FTP commands through a socket connection in java, or you can use a freely available FTP java API to make it a bit more simple. You could also write a small java server on the other machine, and have it tell you what you need to know with a socket connection. In this way, you have created your very own network protocol.

Error could not find file/pathurl for id file::QTMRead

Hi,
I'm very puzzled as to this error I have gotten on multiple projects when trying to check back out.
Error could not find file/pathurl for id file::QTMRead
I'm halfway through a project with a deadline of next week, and have been using edit proxies, so am just worried about being able to export the final project if the Server cannot find the file.
It seems to get this error after a glitchy upload where the server locks up and I have to force quit. Has anyone had this message before/have any ideas how to solve it?
Some speedy help would be very much appreciated.
Thanks,
Dania

You need to make sure that you imported the Reports.xml file into the FDM application. Also, you will want to login to the application using the workbench client and click on the Reports tab and expand the English > Check Reports and right-click on the check report and choose "Set as Validation Report".

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because wh

I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.

hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi

Omit the Open Hub control file 'S_*' for flat file extracts

Hi Folks,
a quick question is it somehow possible to omit the control file generation for flat file extracts.
We got some unix scripts running that get confused by the S_* files and we where wondering if we can switch the creation of those files off.
Thanks and best regards,
Axel

Hi,
However, the S_ (structure) file does not reflect the proper structure. The S_ file lists all fields sorted in alphabetical order based on the field name, instead of listing all fields in the correct order that they appear in the output file.
As I know and checked this is not the case. The S_ file has the fields in the order of infospoke object sequence ( and in transformation tab, source structure).
I would suggest you to control it again.
Derya

What determines the file encoding for ${C:file.txt} = 'abc' ?

What determines the file encoding for
${C:file.txt} = 'abc'
I'm always getting ASCII as the encoding for file.txt after executing that assignment.

Thanks so much. I'll keep looking for the MSFT doc on this. I scanned Bruce Payette's book and did not find anything there.
It turns out to be one of those "by rote" things you have to learn about PowerShell.
My concern about the lack of documentation is that MSFT might change the underlying code in the future to use Unicode and that might break some existing code. If there was some MSFT provided documentation declaring ASCII as the intended encoding they
might provide plenty of warning if they do a switch in encoding.
I note also that if you try to write characters outside the ASCII set (see example below) that character substitution happens to find an ASCII character to use in place of the one outside the ASCII set. In the example below a 'v' is substituted for
the '√' character:
${C:xo.txt} = '√'

Need to Pass filename for archived file to FTP adapter using SynchRead

Hi
I am archiving the source file which i am reading using an FTP adapter, Operation- SynchRead.
In my case as the source filename is dynamic( abc_<timestamp>.xml) hence before the SynchRead, I am using a FTP List adapter to get the filename.
Currently,the archived file is getting name in pattern: encryptedToken_yyyymmdd_hhmmss.(e.g. wQ2c3w7Cj7Y6irWnRKqEu77_jD7kLtj6Uc0QCZIyjC4=_20121122_012453_0305)
I need to pass the sourceFilename(which i am getting from FTPList adapter) for the archived file also.
Thanks in advance for the help!
Regards,
Achal

Hi Neeraj,
While trying the above alternative, i am facing an issue when my source file is a .csv file. The file is getting recreated with the original filename and file content but without header.
As per the requirement i need the original file to be recreated. The header of .csv file has the field names.
Please let me know how should i configure my FTP adapter to read the header of the .csv file as well.
Thanks,
Achal

Uploading .mp3 files vs. uploading .band files for Podcast on iWeb

I teach high school and have my students creating audio files for podcast on my iWeb site. Most of the students give me their files in .band format, but some give them to me in .mp3 format.
1) Can I upload the .mp3 file for podcasting to iWeb without turning it into a .band file (which I have been doing).
2) When I drag the .mp3 file into the GarageBand program and then upload it to iWeb, the autopage looks different (no date, no place to write a little blurb, etc.) Is there any way to get them to look the same when using the Share>send to iWeb feature.
3) I also receive frequent corrupted files (8-bit not supported with an abort button). I have never personally receive this message on files that I have created, but I can't figure out what my students are doing incorrectly--anyone know?
Thanks for any possible help.

I am putting a link to what I am talking about--maybe that would help?
http://web.mac.com/apomerantz/iWeb/Site/Podcast%203/Podcast%203.html
See the difference between the entries "flout" and any other entry.
Thanks!

How to get a list of file paths for all files used in a project

I have a project in Premiere Pro CC which has a large number of bins. A sequence in one of these bins uses files from other bins. I am trying to find the locations of all each of the files used in the project.
1) Obviously I can select each clip in the timeline and show in finder, but there a lot of clips
2) The video usage associated with each file in the project would help. However
1. I haven't found a way to display only clips that have video useage if all of the bins have not been expanded.
2. Video usage shows usage for all sequences, so one would have to manually check the pull down for each file to see if it is used in the sequence in question.
3) I tried exporting the project to final cut pro xml. The path url gives me the information that I need. For some reason, however, when I do the export only one clip's information is there, not the information for all of the other clips in the project.
4) I tired an export for speedgrade and all of the file names are there. However the paths are not.
Basically I want to find all of the files in the project and relocate them to a specific folder for that project. There's got to be a way to do this but I'm not seeing it ....

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

How do I change the default file format for saving files in Preview

I often take screen clips and save them as files to my desktop, then upload them to my website or include them in emails. The default file format for Preview seems to be TIFF, but I'd prefer jpg. How do I convince Preview to use jpg as the default file format?
TIA,
Thad

I should have been a little clearer...
If I'm emailing a screen-clip, I can just paste it right into the email, but I post on a lot of discussion boards and it's often nice to be able to include a screen shot in those. My preferred way to do that is to post the clip at my personal website and then put a link in the post. It gives me the ability to delete the image whenever I want (a plus for any security freak) and it works on every discussion board I know. Some boards allow attachments, some don't. Plus I don't want to have to remember different d/b file attachment procedures. Anyway, when I make a screen-clip, I need to temporarily save it (usually to my desktop), then ftp it to my website. I use Preview to do that. It's simple. But I'd like it to default to .jpg instead of .png or .tiff. (FWIW, I just tried it and the default was .png, but I swear I did something similar earlier that defaulted to .tiff when I first tried to save the newly-created file).

File association for .rexx files

Hi all,
This will be my first post here. I've searched the web (and this forum) for an answer to my question, but have up untill now not been able to find it.
I have installed Regina Rexx, cuz I want to use that language as my command language. I've used it professionally for years in an IBM mainframe environment and at home on my Linux and Micro$oft machines.
Now I have it installed, and it works. Running rexxpcs gives me a whoppin' 8.462.623 executed clauses per second!
Gerard-iMac:~ gerard$ rexx /usr/share/regina/rexxcps.rexx
----- REXXCPS 2.2 -- Measuring REXX clauses/second -----
REXX version is: REXX-Regina_3.5 5.00 31 Dec 2009
       System is: UNIX
       Averaging: 10 measures of 30 iterations
       Performance: 8462623 REXX clauses per second
Now I would like to be able to start my xxxxxx.rexx files from within the finder. When I right click on such a file and open it's info pane - this is what every page on the subject suggests - I seem not to be able to allocate /usr/bin/rexx with my file(s).
Questions:
1. How do I proceed?
2. Why (if not) does it not work this way?
Bear in mind that, however I consider myself computer literate, I am relatively new to the Apple domain...
Thanks in advance,
Gerard

Ok, I thought that's what you were trying to do but I just needed to be sure.
Since these kind of files are rexx interpreter files they are not applications and therefore cannot be directly executed from the finder. And while you could get them to open in terminal the terminal has no way of knowing you want to use rexx on them. So you need to encapulate (wrap) them to make them look like they are finder applications.
There are a number of shell command excapulators/wrappers. One of my favorites is Platypus.   You can download it from macupdate. Click that macupdate link because it suggests other shell wrappers than you may prefer as alternatives. I'm mentioning this because if the shell commands generates any output (stdout, stderr) then not all of these wrappers handle output. I haven't looked at Platypus for some time so I don't recall if it does or doesn't. Maybe some of the alternatives do.
If the command doesn't generate any stdout/stderr output then Platypus (and many of the others) should work ok. The end result is what looks like a normal finder application that you can execute.
Oh, almost forgot. You could also encapsulate the shell commands using applescript.

Can Vbscript measure File transfer for mutliple files?

Hi,
Can VBscript able to measure timing for multiple files transfer using WinActivate or other option?
Example:
copy C:\Single 3GB file to D:\
copy C:\Single 5GB file to D:\

robocopy is using msdos to do transfer both files to D:\ and robocopy log file will have the duration of the file copy.
What I need to know is using vbscript to do in Windows for below task.
Robocopy does not use DOS, it is a Windows command.
Why does this need to be done using VBScript? If you really have to, you can either just use VBScript to launch Robocopy or you can use the method jrv mentioned up in the first post.
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Unable to change File Type for specific file extensions

Under Preferences->File Types different file extensions are assigned a file type e.g. The file extension .pkb is assigned the file type of PL/SQL. The file type of PL/SQL then opens the Code editor.
I have a user who would prefer to open .pkb files in the SQL Worksheet editor but I am unable to change the file type to SQL Script as the option is greyed out.
How do I change the File Type for these extensions? Is there a preferences file I need to change?
Version: 3.2.20.09
Thanks for your help.

Hi,
There is no preference but it turns out you can manually edit one of the preferences.xml files to force PL/SQL types to use the SQL worksheet editor. For SQL Developer 3.2.20.09.87 that file is system3.2.20.09.87\o.sqldeveloper.11.2.0.9.87\preferences.xml and will be located (on Windows 7, for example) in directory C:\Users\<userid>\AppData\Roaming\SQL Developer
No guarantee this will work in future versions of the product, but for now you can add the following two xml blocks...
For example, for .pls, add to <extensionToContentTypeMap ...>
            <Item>
               <Key>.pls</Key>
               <Value>TEXT</Value>
            </Item>
and <userExtensionList>
            <Item>
               <docClassName>oracle.ide.db.model.SqlNode</docClassName>
               <userExtensions class="java.util.ArrayList">
                  <Item class="oracle.ide.config.DocumentExtensions$ExtInfo">
                     <extension>.pls</extension>
                     <locked>false</locked>
                  </Item>
               </userExtensions>
            </Item> I researched this a while back after reading through some forum thread where someone claimed the PL/SQL file extensions got opened in the SQL editor in his environment, but without stating any specific release information. Possibly it worked for him then due to different product behavior (whether intentional or a bug), or perhaps even due to the technique described above.
Regards,
Gary
SQL Developer Team

I need a file splitter for .band files.

Similar Messages

Maybe you are looking for