I need a help ASAP

Dear all,
i have prablem with my nokia N 73ME
evry time i turn it off and on it ask me to enter the date and time .....
can ou help me in this ....
majed

Dear Friend,
thank you very much for your information.
I solve this problem with updating my nokia by Nokia website
but after I finished it it ask me for the memory password and i still remember that I didn't do any password to my memory in my phone ..I tried 0000 and 1234 and it didn't works
do you know how can I solve this problem please ..
Regards,
Majed

Similar Messages

DESPERATELY NEED LabVIEW help ASAP for hire

Need LabVIEW expert ASAP for help with outputting a digital signal. $50-$75 to start - probably would only take an hour though. Would like service by Monday the 24th if possible. Over the phone or on site (Ann Arbor, MI) will work. Please contact [email protected] or [email protected]
We are working with a USB 6501 DAQ board, LabVIEW 8.5, and need to send a 3.5-5 V DC signal for controlled second time intervals (on/off). For example, send signal for 15 seconds. Turn off for 45. Do this for 3 outputs and repeat this process as many times as controlled by the user.

I hope this isn't homework

HT204380 Hello, I buy 4S but there is no FaceTime application at all. I have even search in the my phone could not able to find. What should I do to have FaceTime software or application ? need a help ASAP

Hello, I buy 4S but there is no FaceTime application at all. I have even search in the my phone could not able to find. What should I do to have FaceTime software or application ? need a help ASAP

You probably purchase your phone in a country where the government has banned FaceTime, such as Saudi Arabia.

Can't boot Lenovo Yoga 10+ HD, need some help ASAP!

Hi guys,
I am a bit clueless here. I just purchased the Yoga 10+ HD tablet and all was fine. Today I realised that my power button is constantly blinking (every 3 seconds). I cant boot the tablet the usual way by pressing the button. Clicking on it for more than 10 seconds won't change anything eiter. What is this and how can I get my tablet back to work?
PS: If I connect my tablet to my PC I get more than 12+ harddrives which can't be accessed and differ between 550kb up to 12gb.
I seriously need some help. I think its somehow in sleep mode or so. I don't know how to fix this.
thx for any solution.
Solved!
Go to Solution.

Ok guys, got it. All fine. HAd to push button more than 30 secs. All fine now.

I am so screwed! In need of help ASAP!

I switched out my old HD for a new 500GB HD. Cloned it using SuperDuper, upgraded to Leopard from Tiger on the new HD and updated it. I then wanted to change my home user or short name and followed these instructions:
http://support.apple.com/kb/HT1428
Followed all the steps until number 8. I realized that it's more accounts and so I deleted the newly created account. Logged off from root, logged in my usual Admin user and poof, all files are gone and it's just like a fresh new installed of Leopard.
I booted up using my old HD in my enclosure, reformatted the new HD. I then used SuperDuper, Carbon Copy and Disk Utility to clone again but all failed due to errors. I found the problem, applications missing in my Application folder, the file is there but the icon is invisible. When I tried deleting it, it stated that there's an error and could not be deleted -43. I used Disk Utility and repaired the old HD, repaired failed. I then restart and try to boot again using the old HD, and now, I can't boot anymore and the laptop just shuts down itself.
THIS IS RIDICULOUS. These are all the steps I've listed and I don't know how to continue!
Please help!

I'm guessing you didn't prep your new drive. Do the following (you will need to boot from your external drive:)
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU. Now use SuperDuper! or your favorite cloning utility to clone your system from the external drive to the new internal drive.
If you need to change your short name this should help: Macworld | Changing the short username in Leopard.

Need some help asap! Please

I'm typing up a long paper, and I have a outline that I made in outline form.
ie -
I.
A. xxxxx
B. xxxxxxx
Now what I want to do is go under each line in my outline and make remarks. What I want to do is start my comment where the first letter of the outline is (for instance, under the first "x" of letter A.)
What I'm doing is going to the inspector and change the option under "follow paragraph style" to "free form", then I hit enter, tab over, and it works. But every time I to go the time line it goes back to "original" and I have to change it back to "free form"
Is there a way to keep it on "Free form" so I can just in my outline? is there any eaiser way to do what I'm trying to do? I really need to get this done tonight.
thanks!

You need to redefine your list style.
What you are going to do is the 3rd level will be indented but have no number.
Create a sample of the list text with only the 3 levels
Select the 3rd level text and go:
+Inspector > Text > List > Bullets & Numbering > No Bullets+
This will be indented too far in.
With the 3rd level still selected:
+Inspector > Text > List > Bullets & Numbering > Text Indent: 0.2 cm (in my case)+
till it aligns with above.
Now select the whole range of the 3 level list:
+Menu > View > Show Styles Drawer > List Styles > click on tiny triangle > Create New List Style from Selection… > Give name > OK+
Use that as your list style from now on.
Peter

In a Bind and Needing Some Help ASAP

Hello-
I need my MacBook Pro with Safari (latest version) and OS X 10.6.6 tomorrow for a presentation and I tried just like I did with the last Flash update to install it and I messed things up. TechTracker told me there was an update for Flash so I clicked "yes" to download and install. I am new to TechTracker and installing Flash, but whatever happened my MacBook is not useable right now and it was before I clicked "OK" to update Flash.
I also tried it on my own, but there must be more detailed instructions than what Adobe makes obvious to newbies (Flash update newbies).
since I use Safari as my browser, it shows what plug-ins I have on a webpage that is part of Safari browser. First off, is it too early to update to the latest version of Flash? is this a program that I should wait awhile when a newer version comes out?
If it is OK to go ahead and update Flash, can somebody lead me to a link or website that explains how to update Flash? it obviously is not like other programs, because I have done the install ust like I would other programs or updates but I am not getting it right.
I would really appreciate it if somebody could guide me through the process or send me to a site that explains what I need to do.
Finally, I have heard that Shockwave Player (which is not installed on my macBook Pro) is a great program along with Flash to have on my macBook pro. is this true or am I risking causing more conflicts and/or problems by installing shockwave for macs once I get Flash straightened out.

Yikes, ArrayIndexOutOfBounds (stanz answer)
Here is working code that does what you want.
      * This method finds the smallest Int value in the array.
     public static int findSmallest(int[] array) {
          int min = Integer.MAX_VALUE;
          for (int i = 1; i < (array.length); i++) {
               if (array[i] < min)
                    min = array;
          return min;
     public static void main(String[] args) throws IOException {
          Test t = new Test();
          Scanner scan = new Scanner(new FileInputStream("C:\\Testing\\junk\\classes\\new.txt"));
          int size = scan.nextInt();
          scan.nextLine();
          int[] array = new int[size];
          for(int i = 0; i< size; i++)
               array[i] = scan.nextInt();
               scan.nextLine();
          int smallest = findSmallest(array);
          System.out.print(smallest);
     } // end method
Message was edited by:
SomeoneElse

Need Bittorrent Help ASAP! Willing to Pay!

Hello,
I am currently at the University of Georgia and trying to get bittorrent to work. The client I am using is transmission, and I am working on a macbook The download speed will not pass much over 1kb/s. I know that the torrents I am trying are healthy and would normally download from my house at around 100kb/s. If someone can help me solve this, I would be more than happy to paypal them some money. Remember, I am in a dorm at a major university so I have no access to the router or anything.
Thanks a lot,
Eric

I would be more than happy to paypal them some money.Eric, everyone here is on a volunteer basis and routinely works their tails off to help folks with their issues. Offering money is not only unnecessary but a violation of the Terms of Use. If someone takes you up on it, decline. You can get advice just as good or better for nothing.
It does sound like a shared bandwidth issue.
Also, remember that any Mac could be cracked/hacked. If you use common sense the odds against it happening are long. If you use a bittorrent client the odds get better.
You can protect yourself by using your firewall and/or a hard wired router, downloading only from "trusted" sites, installing all security updates and being careful about what you give administrative power to.
Don't use Limewire or any other P2P service to download your software, get it from reputable sources. In addition, always keep at least your users backed up, preferably a clone of your entire system on a separate disk. And put your sensitive passwords, bank accounts, credit card numbers in a "secure note" in a new keychain or in an encrypted folder.
You can also use these online security tests to see how secure your Mac is.
Enjoy your Mac
-mj
[email protected]

NEED iPHOTO HELP ASAP

This is the second night in a row my iPhoto has randomly uploaded 10 of thousands oh photos of garbage that i do not need! Last night over 80,000....tonight it just went back to over 60k. I don't know why it is doing this and i don't have to the time to be deleting 70,000 photos a day! Especially since I'm an amateur photographer trying to make money with my photos. Anyone ever heard of this or know what is going on?!?

Fastest and best solution is to restore your backjup from just before this happened
While it has been reported a few times there has been no definative cause identified - the best guess is an interverent action by the user acccidentially draging their hard drive icon onto iPhoto and improting all images from it
LN

I need Urgent Help ASAP!!! ipod classic is now a mini??!!!

I just got a new 80gb ipod classic for christmas yesterday. All was going well while i was using it all day and putting music and podcasts on it but later that night I went to help my sister put music on my old ipod mini for her to have it and when i re attached my ipod the ipod graphics look miniesc! THe do not dissconnect stays on continuously and seems to have many problems now. Also before this happened it began acting slower and my computer told me a restore wasn eeded AFter i did the restore my brand new ipod now looks like an old one! How do I fix this!?!?!?!?
-extremely frusterated.

If your iPod is recognized in "my computer", changing the drive letter can sometimes resolve this "can't mount iPod" issue.
Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
Choose something lower down the alphabet, say 'M' or something similar.
The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.

OMG you updated Firefox last night and wiped out ALL my docs, photos, tabs, downloads, history EVERYTHING. Need BIG HELP ASAP. Tkx. 4/16/13

My computer shut itself down overnight. The only clue I have is Firefox announcing that it's now all updated. BUT my entire computer has been stripped. In addition to loss of tabs, bookmarks, history, there are no docs, no photos, no downloads, missing software, the entire tree of folders is *gone* including the docs I was working on for a.m. client meetings. Nothing in the trash folder.
Firefox has messed with its own settings before but today it seems to have viciously reset my computer to nearly naked.
I realize that you understand how serious this is. Surely it has happened to others. Please, please have a fast and effective solution. Thank you.

Firefox can't Reset your computer's profile. what most likely happened is you are having a problem with your computer, and it got started up in a default profile (and Firefox probably didn't update last night, it may have given that message because Firefox's profile was gone too).
Do you get a message like "Windows cannot load the user's profile but has logged you on with the default profile for the system" in the bottom right hand corner when you start your computer? If so, contact a reputable local computer repair company, they can assist with recovering your data.

Trying to boot from usb need help ASAP

Hi everyone i have a compaq presario CQ 40-330 TU laptop. Its dvd drive has failed few month ago and as i did not use dvd drive much so i did not replaced it instead i made a bootable windows 7 repair usb with this following procedure http://www.intowindows.com/how-to-repair-windows-7-from-usb-flash-drive-repair-without-installation-... Today i need to boot my pc using the usb drive but to my surpise it failed to boot. So i need your help ASAP because my laptop is now unbootable and i need it fixed quick. What should i do?? When i entered the bios i found out this information Boot option CD- ROM boot < disabled > Floppy Boot < Enabled > Internal Network Adapter Boot < Disabled > Boot order USB floppy ! Internal CD/DVD ROM drive. Notebook Hard drive ! USB CD/DVD ROM drive USB Diskette on key / USB Hard drive ! Network adapter. Please help.....

Hi. I think I have pretty similar problem on notebook HP Compaq NX6110 with crashed CD-ROM.
I've prepared the bootable USB drive using this procedure (with a small modification because I want to intall Windows XP):
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/...
Anyway, in bios setup I change the boot device options so that the "USB hard drive" is set as "the first" and USB Superdrive (slt) is set to the second... I save the settings etc. I restart the computer and in the blue boot menu that appears I can only choose Notebook harddrive and Optical drive (no USB).
Any ideas? Is it possible that this notebook does not support USB booting thought there is an option is BIOS?

Row_number query - need help ASAP

Hi ,
Need some help bout query
I need a query for display output like below
DATE          CODE     MAC_NO BATCH_NO
01-OCT-07     1119     02     1
20-OCT-07     1210     01     2
01-NOV-07     1209     01     3
01-NOV-07     1510     01     4
01-NOV-07     4025     01     5
01-NOV-07     4025     01     5
01-NOV-07     4051     03     6
02-NOV-07     1209     01     7
i hv no idea how to do it. My query doesn't work for tat requirement.Tis is my query
SELECT date
,code
,mac_no
,ROW_NUMBER()
OVER (PARTITION by date,code,mac_no
ORDER by date,code,mac_no)
as batch_no
FROM PAYMENT
WHERE npcs_cycle_num = 27
AND txn_insert_seq_num > 0;
The output juz like below.I need everybody help ASAP.
DATE          CODE     MAC_NO BATCH_NO
01-OCT-07     1119     02     1
20-OCT-07     1210     01     1
01-NOV-07     1209     01     1
01-NOV-07     1510     01     1
01-NOV-07     4025     01     1
01-NOV-07     4025     01     2
01-NOV-07     4051     03     1
02-NOV-07     1209     01     1
Thanks
CT

I'm sorry..Maybe my words it not that clear enough. You were right about how ROW_NUMBER works (it
assigns a numeric value and resets based on the grouping you specify in the PARTITION clause).
What I want actually is the row number increment based on the txn_date,poc_code and machine_no.
I'm not sure whether using the row_number() can solve my solutions. I really hope that you could help me.
I thought of using row_number() may help. Do you have any other solution?
Here is my table description.
DESC PAYMENT;
Name Null? Type
TXN_ID_NUM NOT NULL NUMBER(12)
ACCT_NO NOT NULL VARCHAR2(14)
CANCEL_CODE VARCHAR2(5)
ADJ_TYPE_NO VARCHAR2(2)
REASON_CODE VARCHAR2(5)
CASHIER_ID_NO VARCHAR2(10)
SUPERVISOR_ID_NO VARCHAR2(10)
REV_CODE VARCHAR2(5)
TXN_DATE DATE
PAY_ADJ_DATE DATE
POC_CODE VARCHAR2(10)
MACHINE_NO VARCHAR2(3)
PAY_MODE_CODE VARCHAR2(5)
ORIG_ACCT_NO VARCHAR2(14)
PAY_AMT NUMBER(12,2)
INVOICE_NO VARCHAR2(20)
PAY_RECEIPT_NO VARCHAR2(24)
PAY_BATCH_NO VARCHAR2(20)
NPCS_CYCLE_NUM NUMBER(4)
TXN_INSERT_SEQ_NUM NOT NULL NUMBER(12)
2) Below is the query before assigning the row number:
SQL> SELECT TXN_DATE,POC_CODE,MACHINE_NO,PAY_BATCH_NO,PAY_AMT,REV_CODE,ADJ_TYPE_NO,PAY_MODE_CODE
2 FROM PAYMENT
3 WHERE NPCS_CYCLE_NUM=27
4 AND REV_CODE IN (SELECT rev_code
5 FROM OUTBND_REV_CODE
6 WHERE outbnd_agen_file_code = 'TMB'
7 AND sys_appl_id ='CCC')
8 ORDER BY TXN_DATE,POC_CODE,MACHINE_NO;
TXN_DATE POC_CODE MAC PAY_BATCH_NO PAY_AMT REV_C AD PAY_M
01-OCT-07 1119 02 20071101120900000000 154.25 017 85 1
20-OCT-07 1210 01 20071101402501400000 444.02 017 00 5
01-NOV-07 1209 01 20071101120901100000 585.32 017 85 1
01-NOV-07 1510 01 20071101402501100000 493 014 00 1
01-NOV-07 4025 01 20071101402501100000 203.85 016 00 3
01-NOV-07 4025 01 20071101402501100000 487.96 017 00 1
01-NOV-07 4051 03 20071101402501100000 109.26 016 00 3
02-NOV-07 1209 01 20071102120900000000 105.76 014 00 1
3)This is my query and the result:
SQL> SELECT /* SQL_ID 2703 */
2 txn_date
3 ,poc_code
4 ,machine_no
5 ,pay_batch_no
6 ,pay_amt
7 ,rev_code
8 ,adj_type_no
9 ,pay_mode_code
10 ,ROW_NUMBER()
11 OVER (PARTITION by txn_date,poc_code,machine_no
12 ORDER by txn_date,poc_code,machine_no)
13 as row_number
14 FROM PAYMENT
15 WHERE npcs_cycle_num = 27
16 AND txn_insert_seq_num > 0
17 AND rev_code IN (SELECT rev_code
18 FROM OUTBND_REV_CODE
19 WHERE outbnd_agen_file_code = 'TMB'
20 AND sys_appl_id ='CCC');
TXN_DATE POC_CODE MAC PAY_BATCH_NO PAY_AMT REV_C AD PAY_M ROW_NUMBER
01-OCT-07 1119 02 20071101120900000000 154.25 017 85 1 1 (1)
20-OCT-07 1210 01 20071101402501400000 444.02 017 00 5 1 (2)
01-NOV-07 1209 01 20071101120901100000 585.32 017 85 1 1 (3)
01-NOV-07 1510 01 20071101402501100000 493 014 00 1 1 (4)
01-NOV-07 4025 01 20071101402501100000 203.85 016 00 3 1 (5)
01-NOV-07 4025 01 20071101402501100000 487.96 017 00 1 2 (5)
01-NOV-07 4051 03 20071101402501100000 109.26 016 00 3 1 (6)
02-NOV-07 1209 01 20071102120900000000 105.76 014 00 1 1 (7)
8 rows selected.
What I want actually as in the bracket (group by three fields which are txn_date,poc_code and machine_no)
.I hope this is clearer.

Can't Update BIOS of my MSI GTX580 Twin Frozr 2 OC....!!!! Help ASAP....!!!!

Hi guys from Greece....!!! I Have a major problem here and i need your help ASAP...!!!
I've purchased and a computer technician installed on my PC a brand new MSI GTX580 TwinFrozr 2 OC...!!
The problem is that my GTX580 has the old BIOS Version and i have to update it....!!! No matter how many times i tried to update it with Live update 5 it didn't work at all...!!! Live update 5 doesn't begin at all ..it always pops up an error message...!! Then i did a research in the forum and tried to update the BIOS with the Method of a USB stick Boot...... i did the exact things as needed but i just can't update it at all....!!! Will MSI release another Version of Live Update that it will work.???? Is there another way to update to the latest BIOS under Win7 .???? I have Win7 32-bit version....!!! Please help me, i'm freaked out ...!! I paid almost 500 Euro for this Card...!!!
Every advice/help will be welcomed....!!! Thanx for reading my topic...!!!

Quote from: STAM on 30-April-11, 01:52:11
I downloaded the rar that you attached , did what you told me to do ...i run GPU-Z and it shows that the BIOS version is the number 70.10.17.00.01 ,Is this the latest bios or is it the old one.????
This number will remain the same.
If you want to check current VBIOS version installed:
Get this: https://forum-en.msi.com/index.php?action=dlattach;topic=147603.0;attach=7931
extract it somewhere, then run info1 , and look for the last line and tell what it is

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

I need a help ASAP

Similar Messages

Maybe you are looking for