I need a help to install mobilevoip in my new iphone 3g

I bought iphone 3g (ios 4.2.1) recently. I tried to install mobile voip which present in app store, but it is asking me ios 4.3. This should not happen, please can you assist me in installing mobile voip to my phone.

Right, It is old phone. Did not know the problem when i was buying it. I was very eager to install mobile voip, but that requires at least ios 4.3. And upgrading to 4.3 is not possible for iphone 3g.

Similar Messages

  • HT5625 please i need a help, a cant afford to buy new iphone, i bought pairly used in the market here in khartoum Sudan, mistakenly i reset it where i realised that i cannot use it again because it was linked to an apple id, and i dont know the person.

    please i need a help about how to use my iphone again, i bought pairly used, mistakenly i reset it and then i realised that it was linked to another persons id and password which i dont know or how to contact the person, and still i cant evan see the full email adress of the person which i think i could have contact him directly. so does that means i can no more longer use the phone again? please i need help, am a student from khartoum sudan.

    profuhassan wrote:
    please i need a help about how to use my iphone again, i bought pairly used, mistakenly i reset it and then i realised that it was linked to another persons id and password which i dont know or how to contact the person, and still i cant evan see the full email adress of the person which i think i could have contact him directly. so does that means i can no more longer use the phone again? please i need help, am a student from khartoum sudan.
    That is correct, you now have a paperweight.  Unless you can get a hold of the orignal owner.

  • I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now

    I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now

    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "Edit Products"
    Click on the "X" to the right of the product.
    Click "Unregister".
    If that doesn't work, you're going to need to call AppleCare and have them remove your phone from the system.
    Best of luck.

  • Re-install back up on new iphone!

    Right it finally happened, my screen is cracked and the center button is screwed!
    But, I've had it a year and a half, good life.
    What I need to know, is.....
    Can I take the back-up of it the was done about 2 weeks a go when I updated it and re-install that on my new iphone that I'm getting shortly?
    Cheers People!

    ripper27 wrote:
    Can I take the back-up of it the was done about 2 weeks a go when I updated it and re-install that on my new iphone that I'm getting shortly?
    Yes, you will be given the option of setting your new phone up as a "new" device or restoring it from that backup. Select the backup you have. Everything but email & wifi passwords will be restored.

  • HT201622 How do I install apps on a new iPhone 6 that uses a different Apple ID than the one used to purchase the apps?

    How do I install apps on a new iPhone 6 that uses a different Apple ID than the one used to purchase the apps?

    Sign in to the iPhone or connect the phone to the computer and sign into the store using the original ID and download the apps to the phone?

  • I had Net10 Wireless, What information do i need to transfer my net10 number to my new iPhone 5 through T-mobile?

    So i had Net10 on a 3GS Phone, im buying a new iPhone 5 through T-mobile on Tuesday, What information from Net10 do i need to transfer my phone number to the NEW iPhone 5 through T-mobile?

    Further info:
    The FCC requires all simple ports, which yours is, to be completed in one business day & NET10 cannot refuse to port the number for any reason, but, they are permitted to charge for processing the port on their end. Your new carrier, T-Mobile starts the porting process. The FCC recommends you provide your new carrier with account number & zip code, in addition to phone number, but such additional info is not required.

  • Need Urgent Help Cannot install Mac OSX 10.6 on 20" intel imac

    I recently purchased an intel imac an intel mac pro from an auction. When i purchased the macs i was told that no operating systems will installed and i would need to purchase and install mac osx10.
    I purchased the mac osx10.4.6 family pack from the apple store online.
    i put the new disc in the mac and restarted holding down c.
    for some reason nothing happens and i get folder with a question mark.
    I have tried this several times but nothing seems to work.
    I am a complete novice with macs and migrsting from pc.
    thanks

    You cannot buy a retail version of Tiger that will install on any Intel Macs. You must have the original installer discs that came with the computer. You should not have purchased the computers without them nor should they have been sold to you without them.
    The only option you have is to call AppleCare or go to a local Apple store and see if you can purchase the discs needed for each computer (there are different versions for each model.)
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Hello  I need your help with installing the flash drive into my laptop

    Hi
    I am Rachel Friedman asking for your help with installing the flashdrive player into my laptop.
    Thanks
    Rachel

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • Need to know currently installed iOS firmware version on iPhone...

    ... but the problem is that, like many jailbroken devices (mine being one I didn't know was jailbroken until the problem occured... though now that I've researched the problem a bit, I realized that I should have taken heed of the "Cydia" app that was just THERE on my app menu... I tried opening it, but it never worked), my iPhone won't exit recovery mode after my attempt to update the phone.  I don't remember the firmware that was currently installed on it at the time that I tried to update it, and this wouldn't have been a problem unless I was downgrading (which I wasn't), or if my phone had been jailbroken.  The phone was bought used at a local vendor's (it was a good deal).  I am certain that the phone is an iPhone 3GS.  Right now, what I can see when I plug into iTunes (version 10.4.1) is that it is an iPhone, capacity and software version is "n/a", and its serial number.  Using third party programs RecBoot and tinyumbrella yielded no results whatsover.  The error number when I try to update to the new software version is 1015 (typical of a careless jailbreaker), and when I enter DFU mode and try to option+restore with firmware 4.1, I get an error 20, but with other devices I have, security getting in the way is never a problem.  Instructions for error 20 online said that a "Fixrecover" unix program could help me, but the "Fixrecover" script for iPhone 3GS cannot connect with the phone in DFU mode for some reason, and I had already restarted my computer once to try each of these.  If you want any more information or have suggestions for me, I'd appreciate some help.

    Apparenly it wasn't such a good deal.
    Sorry, but if the iPhone won't run and has never been synched with your system, there's no way I know of to find out what version of iOS was on it. You can just try the most recent version of iOS which will work on your 3GS, 4.3.5, and see if you can get that to load. There's a direct download link from Apple here:
    http://appldnld.apple.com/iPhone4/041-1965.20110721.gxUB5/iPhone2,1_4.3.5_8L1_Re store.ipsw
    If that still won't work, then you got an iPhone with either a hardware problem or a firmware totally corrupted by the jailbreak. At that point I'd suggest taking the iPhone back to the vendor and getting your money back.
    Good luck.

  • Need cs4 number to install cs5 upgrade to new computer

    i need my old cs4P# to install CS5 to my new computer, can't find CS4

    Adobe doesn't know what you don't know. If it's not registered on your account or you have some printed version of it, nobody can tell you that. If you bought directly from Adobe and have proof of purchase, support may be able to figure things out, but that's as good as it gets...
    Mylenium

  • HT201269 I have an IPhone 4 that turns off.When I plug the phone into a outlet, it says to connect to iTunes. But my phone doesn't connect. I need to backup info to sync to a new iPhone. Is there another way to get the info from the old one?

    I have an IPhone 4 that turns off on its own. When I plug the phone into an outlet, it says to connect to iTunes. When i connect my phone to itunes, the screen displays the apple icon and doesn't connect to iTunes.  I need to backup info on this phone so I can apply my back up to a new iPhone. Is there any another way i can do this? My older phone will not show it's connected to iTunes. I used iCloud on the phone with problems, but I didn't back up all the info thru iCloud. Is there another way to back up?

    Sounds like your phone is in recovery mode.  In this case, all data on it is gone.  There's nothing to back up.

  • HT1349 I need to register the serial number of a new iphone to my itunes library so that I can sync it....how do I that?

    My friend just upgraded her iPhone and gave me her old one.  It is the same as my iPhone but mine has quite a few features that no longer work so she is letting me use hers until it is time for an upgrade.  I tried to sync my itunes and apps to it but it is not allowing me.  How do I edit my iPhone information so that I can change the serial number to the new phone's?
    Thanks

    You can't change the seral number of the phone.  But if you backed up your old phone by syncing with iTunes you can set up her phone as a new iPhone and restore it from the backup of your old phone.   If you haven't backed up your old phone you need to do so by connecting it to iTunes and syncing it.  Then on her phone go to Settings>General>Reset>Erase All Contents and Settings.  Finally, follow this guide starting at step 3 to set it up and restore if from the backup of your old phone: http://support.apple.com/kb/HT2109.

  • Need to sync Apps from old Ipod to new Iphone on different computers

    I have apps on my old Ipod touch that I want to put on my new Iphone. My Ipod is synched to my PC, but I want to sync my new Iphone to my Macbook Pro. I also want to put the old apps on my Ipod and put them on my Iphone. What should I do?

    Sign into the Apple ID used to purchase them on you iPhone (in Settings>Store), then download the apps as past purchases directly to the phone (see http://support.apple.com/kb/HT2519).  Prior to syncing with your MacBook Pro, disable automatic syncing in iTunes (iTunes Preferences, on the Devices tab check "Prevent...from syncing automatically").  Then connect your phone and when it appears in iTunes on the left sidebar, right-click on it and select Transfer Purchases (to transfer the apps to your iTunes library).  You will also need to authorize your computer for this Apple ID in iTunes (under Store>Authorize this computer) in order to sync these apps to your phone.

  • How to install exisiting account with new iphone

    how to install exisiting account with new iphone

    What account?  Have you tried following the prompts on the activation screen?

  • Need a Help with instalation SAP IDES 2005 SR2

    Hi All,
    I'm trying to install SAP IDES 2005 SR2 on my notebook HP (2GB RAM, 120GB HDD, 700 HDD external, dual core procesor), Win Server 2003 Enterpise, Oracle 10g (patch 2), jave 1.4.2.13, I've downloaded all installation files DVDs from SAP Marketplace.
    Everytime my installations stops on step 19 - Import ABAP, and I get message like this:
    (DB) INFO: T76MGE_CGROUP~0 created #20081023222635
    DbSl Trace: Error 604 in exec_immediate() from oci_execute_stmt(), orpc=0
    DbSl Trace: ORA-604 occurred when executing SQL stmt (parse error offset=0)
    (DB) ERROR: DDL statement failed
    (CREATE TABLE "T76MGE_CKI" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "CHKL_ITEM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "TASK_FOR" VARCHAR2(12) DEFAULT ' ' NOT NULL , "START_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "POSS_DUR" VARCHAR2(12) DEFAULT '0000' NOT NULL , "PSDUR_T_UNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "NEC_IT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "IS_DOC" VARCHAR2(3) DEFAULT ' ' NOT NULL , "START_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "START_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "END_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "END_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "END_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
    (SQL error 604)
    error message returned by DbSl:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
    (DB) INFO: disconnected from DB
    G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20081023222635
    and also:
    TRACE: 2008-10-23 22:22:48 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL2' import package into database:
    G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
    ERROR: 2008-10-23 22:26:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL2' import package is interrupted with R3load error.
    Process 'G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
    For mode details see 'SAPAPPL2.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    WARNING: 2008-10-23 22:26:48
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2008-10-23 22:26:48
    1 error(s) during processing of packages.
    INFO: 2008-10-23 22:26:48
    Import Monitor is stopped.
    Could anyone help me with this issue, what I am doing wrong?
    I'll appreciete any help, cause I'm going crazy  this is may be the 5th time that my installation stops on this stage.
    Thanks in advance

    Hi Eric
    These are values in init.ora:
    #Transaction processing
    #sort_area_size=524288                  
    #Datawarehouse
    sort_area_size=1048576                  
    large_pool_size=1048576                  #Transaction processing, Datawarehouse
    db_cache_size=50331648                   #Datawarehouse, Transaction processing
    java_pool_size=67108864                  #Datawarehouse, Transaction processing
    db_block_buffers =  200                 # INITIAL
    db_block_buffers=100                    #SMALL 
    db_block_buffers =550                   # MEDIUM
    db_block_buffers=3200                   #LARGE
    #shared_pool_size =  52428800             # INITIAL
    shared_pool_size = 67108864              # datewarehouse, transaction processing
    log_checkpoint_interval = 10000
    How I have to chenge the values?
    And in init<SID> values are:
    unit of shared_pool_size: bytes
    unit of db_block_buffers: number of cached blocks
    unit of log_buffer: bytes
    shared_pool_size = 160903987
    10% of shared_pool_size
    shared_pool_reserved_size = 16090398
    log_buffer = 1048576
    Please, let me know what are the correct values?
    Thank you in advance

Maybe you are looking for

  • Idoc to jdbc scenario problum in queue ?

    hi experts I am facing a problem in IDOC to JDBC Scenario (PI 7,1) . When i trigger the idoc first time it is inserting in to the data base . when i trigger second and third time  struck in the queue .By default the quality of service it is taking EO

  • Just dropped water in my macbook pro, what to do?

    I just dropped water in my macbook pro, what do I have to do in this case? Thanks!

  • Runtime error - R6034 (Help unable to open Itunes)

    Hi All, After upgrade of Itunes I get the following error when trying to open Itunes Runtime error R6034 An application has made an attempt to load the c runtime incorrectly Any ideas on what to do? Best regards, Mette

  • REMOVE A PLUGIN

    Recently i install a plugin in my final cut 7, now want to remove it but i don't know how , the name of this one is FxFactory i need some help thanks.

  • Are all 4 RAM slots USER-UPGRADABLE in 27", 2.8MHz, i7 iMac?

    I haven't dug into my iMac yet but am wondering if all 4 RAM slots are user-upgradable... before I fork out the money for more RAM. Currently I have 8GB (4x2GB). I thought the 8GB would be enough for the graphic designing I do (was managing with my p