I need a help to use InDesign CS5 without problems every 30 days.

30 days is the time limit that i have to use InDesign CS5, i want to use that forever without pay for, it's possible? Please help me.

Has to be.
And we don't help people who want to use programs without paying when the trial is over.

Similar Messages

  • Interactive pdf using Indesign CS5.5 problem with layering

    Hi all
    I have designed an interactive pdf - not for the web. I have a problem layering out a page. On the page there are 6 buttons. Each button when pressed will bring forward a box containing content/information. When I designed the page using indesign cs5.5 I made sure the largest box of information was at the top of the layer. I thought this would be the cleanest way to present the page. By having the largest content box (each of the six content boxes are different sizes) at the top it would cover the other boxes. When I exported the file out the smallest box was at the top, then the secondest etc. It looks pretty messy.
    Is there a way to ensure that the lagest content box is at the top when it exported to pdf????
    Regards

    Have patience!
    Have you tried putting that largest box on it's own layer at the top?  I don't know much about buttons etc though, if you wait someone will come on here that does.  A lot of contributors are in different time zones though.....

  • I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    Hi
    That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
    Remove all your tabs and set the text in justified paragraphs.
    I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
    Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
    The text will jump into place the way you want it to.
    Hope that helps
    Paul
    PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
    after you've set it will be LOADS easier this way.
    You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

  • Is it possible to install/use InDesign CS5 with an InDesign CC subscription?

    I need to use InDesign CS5. From the trial, I'm taken to a purchase page where the only option is to buy the CC subscription. After removing the trial and running the CS cleaner to get rid of everything and running the CC installer, it downloads InDesign CS6.

    We have built an InDesign plugin that need to be tested against CS5.
    If it's impossible to use CS5 with a CC account, why is that the only option you're given when you click 'Buy Now' in CS5?

  • I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes a

    I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes ages. Any help out there?

    I believe there are a couple of similar threads about CC or CC2014 behaving this way that might give yo some hints, but CS5 is not supported on your OS and may not run properly regardless of what you do. An in-place OS upgrade or an attempt to migrate the application would both be major problems for ID, so if you did either of those things you'll want to uninstall, run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) and reinstall.

  • Greetings. I have finalized an Arabic Language brochure using indesign CS5.5. Once I opened it in CC 2014, I found Axtmanalblack font look like vertical rectangles crossed. Any suggestions?

    Greetings Dears.
    I have finalized an Arabic Language brochure using indesign CS5.5.
    Once I opened it in CC 2014,
    I found Axtmanalblack font look like vertical rectangles crossed. Any suggestions?
    Thanks.
    Tariq

    AXT fonts don't work well in new versions of InDesign. Your best bet would be to replace the font with a Unicode compliant OpenType font. I believe there are a few Arabic fonts that are included with InDesign that would work.

  • I need to create a schedule that will be performed every day

    Hi,
    I need to create a schedule that will be performed every day. Must start at a specified time and finish their work at a certain time. Joby hooked to this schedule must do their work in a loop, until he completed the work to the procedure. Do you have any solution?

    6e4e5455-0183-4163-be68-1e68fc529042 wrote:
    Hi,
    I need to create a schedule that will be performed every day. Must start at a specified time [...]
    Easy, use DBMS_SCHEDULER to schedule the job to start at a particular time every day.
    [...] and finish their work at a certain time. [...]
    What should it do if it finishes early? What should it do if it hasn't finished its work by the given time? There may be things you can do to make it crash out at a given time - but its helpful to know what your aims are first.
    Joby hooked to this schedule must do their work in a loop, until he completed the work to the procedure. Do you have any solution?
    I don't have a clue what that last sentence means, let alone a solution.

  • Items missing on PDF when using Indesign CS5.5 doc in Indesign CS6

    I have had the problem of picking up a document that had been created in Indesign CS5.5 processing to PDF out of Indesign CS6 and two lines of type and two lines of outlined type had 'disappeared' when run to a PDF.
    I spent some time investigating layers etc to no avail. When I eventually processed the document out of CS5.5 to PDF the result was exactly as appearing on screen in Indesign.
    Does anyone know of this discrepancy between 5.5 and 6 or am I doing something wrong?

    Is it interactive PDF or the Print PDF ?
    Are you using the same settings in Cs6 that is in Cs5 ?
    also, are these items on the master page ?

  • InDesign CS5 Packaging Problems

    Hi all,
    Ok, after a scan of the forum, I saw a few topics that were close to the same problems I am having. Hopefully one of the Adobe techs can shed some light on this for me.
    I am running InDesign CS5 7.0.3 on a Mac Pro running 10.5.8, 3ghz Quad Core Intel with 4gb of ram.
    My situation:
    I go to package a file with no errors in the pre-flight panel. It gets all the way through the fonts section, it gets all the way through the images section and then hangs at the very end of the package process. The progress bar goes no further than this and the only way out is to force-quit InDesign.
    NOW, when I re-start InDesign, the recovery takes place and it has opened the file it just packaged (not the one I was originally packaging) and all links and fonts load properly. The file needs to be saved, so I overwrite the file and all seems fine. EXCEPT, when I go to re-open the file (which is now in its packaged folder on my desktop) - it won't open and InDesign hangs.
    Fair enough. I move the file (only) outside of the folder on to my desktop - and get THIS! It opens PERFECTLY.
    So to recap, it won't open from the folder but it will open from the desktop.
    I thought it might be a permissions thing, but I tried giving all users read & write permissions and it still wont open from inside the folder.
    The craziest part of all this is that it is only happening to a select few files, while others package without a hitch.
    AND these are all files we have packaged before (granted, that was before we upgraded to CS5) but now even the older versions of these files won't package from within CS5.
    My temporary work around is to export an IDML file, open that in CS4 and then package from there - which works perfectly.
    Did Adobe completely change the packaging process in CS5? I've heard rumors CS5 was re-written from the ground up, so I am assuming something has changed causing problems with some files.
    I consider myself a pretty advanced user of Adobe products and I can usually figure out major problems on my own, but this one is really throwing me for a loop.
    Any insight and/or help would be greatly appreciated.
    Thanks!!
    - Joe C.

    Dear Adobe,
    We are using Adobe InDesign CS5: Version: 7.0.4, running on an Intel Apple Macintosh that is using OS X, Version: 10.6.7. This problem has also been exhibited on other Apple Macintoshes here.
    We have read all the post and tried changing all the fonts, still resulting most of the time with the same problem.
    1. When Packaging the process locks up with the message: Saving the Document… Open Document “Section 04.indd”. InDesign is now non responsive and hung up.
    2. InDesign needs to be terminated with “Force Quit”.
    3. When InDesign is restarted it is in the recovery mode and (2) windows open of the same file with an asterisk in front of the name, indicating that they need to be saved.
    4. Once saved, restarting InDesign either results in a locked (hung-up) state or it will start up OK only to hang-up when packaging again.
    Note: I have screen shots of these windows and original files if needed.
    This is what I have found out…
    1. If I uncheck the box “Copy Fonts (Except CJK)” in the window “Create Package Folder” I have no problems, except I now do not have the collected fonts.
    2. If I change all the fonts to a known good font it might fix the problem sometimes.
    3. Looking at the embedded fonts in the Illustrations, if I find a missing font and then replace it in Illustrator with a known good font and then save this illustration out as a new file and then re-link to this file the problem will go away.
    The problem seems to be sporadic.
    I think what is happening is during the packaging process; the fonts that are either collected, or embedded in the illustrations become corrupted by InDesign.
    I have lost DAYS! With this problem and am trying to make a living using InDesign. I do not have the time to do all this troubleshooting on an Adobe product.
    I find it curious that this is happening on both the Mac and PC platforms and find it even more curious that it seems not to be happening using CS4 InDesign like it is with InDesign CS5 as stated in the other post.

  • Why do I have to reinstall InDesign CS5.5 at every start-up?

    I've had InDesign CS5.5 only a few days and have had to reinstall it everyday. It installed fine from the disk the first time. I used it for a couple hours, ran perfectly. I turned off my laptop that night and the next morning when I went to use InDesign again I received the following error message and was unable to access the software:
    Adobe InDesign is missing required files. Please reinstall.
    Missing files: \Program Files\Common Files\Adobe\Type Support\...\CP1252.TXT
    Each time I have reinstalled and once again the program works fine. Until I turn off my laptop. I thought an old trial of InDesign might be part of the issue but I've uninstalled all that and still have the same problem.
    Running Windows 7 Professional on a Dell Vostro laptop. Intel i5. 4GB RAM
    Thanks in advance for any help.
    -N

    There have been two similar reports in the last year or so that I can find, and it looks like an installer problem when CS3 was previously installed (did you have CS3 or CS4 installed and remove it?).
    What seems to be happening is that the type support files aren't properly written to the correct location, and it wasn't entirely clear to me this morning if either previous report was finally resolved. That said, I'd do the following:
    Uninstall using Windows control panel.
    Reboot
    Run the CS5 clean tool: Resolve installation problems with CS5 Cleaner Tool
    Run MSconfig and trun off non-essential startups, especially antivirus, browser helpers and toolbars, iTunes, and instant messengers.
    Reinstall any versions you want, in chronological order. Be sure InDesign is installed into the Program Files (x86) folder (this should happen automatically if you leave the default location).
    Run MSconfig again and restore normal startup.

  • Can I upgrade to inDesign CS5 WITHOUT installing Pagemaker 6.5 plus?

    I'm on Windows Vista 64 and I need inDesign CS5. Since Vista won't let me install my Pagemaker 6.5 plus, I was wondering if I can just input the licence from Pagemaker.
    Thanks

    It means that there is more than one upgrade. You can upgrade from earlier versions of InDesign or from Pagemaker. These have the same price but if you buy the InDesign upgrade from earlier versions of InDesign it won't accept your PM serial number.
    You need to buy the correct PM to InDesign upgrade package which will prompt you for a Pagemaker serial number when installing.
    Is that a bit more clear?
    Bob

  • Installing InDesign CS5.5 Problems

    I am trying to install InDesign cs5.5 on my Windows 7 desktop... the instruction say to navigate to the Adobe Indesign CS5.5 folder on the DVD and double-click
    Set-Up.exe... the problem is there is NO Set-Up.exe on the disc that I can find, only Install.app for the Mac . Any idea where what I can do to get it on Windows? Thanks

    Hi Lindansz,
    Please try to download CS5.5 from the direct link: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html .
    Kindly follow the very important instructions before download.
    Regards,
    Romit Sinha

  • InDesign CS5.5 - Problem beim Öffnen von Dokumenten

    Hallo,
    ich bekomme ein Problem in InDesign CS5.5 nicht gebacken.
    Erstmal ein paar Infos:
    MacPro (2010/2011)
    Mac OS X 10.6.7 und 10.6.8
    Creative Suite CS5.5 (aktuelle Updates)
    Beim Öffnen von Dokumenten bleibt InDesign sehr oft mit dem Sat1-Ball hängen und man muss es mit "Sofort beenden" schließen.
    Es ist egal, wie groß und umfangreich ein Dokument ist und ob es vom Schreibtisch oder vom Netzwerk geöffnet wird.
    Am Anfang dachte ich, dass es daran liegt, dass unsere Macs keine Internetverbindung haben, das wars aber nicht.
    Ich habe mich schon mehrere Stunden mit google gemüht, aber die Lösung war nicht dabei.
    Versucht habe ich schon:
    - Dokumente geprüft
    - Preferences gelöscht
    - ID Cache gelöscht
    - Font Caches gelöscht
    - Fremde Plug-Ins gelöscht
    - Preflight im ID deaktiviert
    - SING-Plug-In gelöscht
    - CS5.5 neu installiert
    - Dem Benutzer Administrator-Rechte gegeben
    Hier mal ein Crash.log: http://pastebin.com/8rED3fXS
    Hat jemand noch einen Lösungsvorschlag?
    Vielen Dank und viele Grüße
    Dominic Schuller

    Hast Du InDesign auf das letzte Update gebracht? (Ich meine innerhalb CS5.5!)
    Ja, alle Updates für die komplette Suite sind installiert.
    Passiert das mit einem bestimmten Dokument oder mit allen Dokumenten?
    Es kommt bei kleinen und großen Dokumenten vor. Dabei ist es egal wie alt es ist und wieviele Verknüpfungen es hat. Es kommt bei Dokumenten vor, die vor langer Zeit im CS3 erstellt wurden, oder gestern erst im CS5.5 am gleichen Mac erstellt wurden.
    Hast Du versucht die problematischen Dokumente mit IDML zu bereinigen?
    Ich glaube nicht, dass es direkt an den Dokumenten liegt. Wenn man InDesign Abwürgt und es wieder öffnet, wird das Dokument, das man vor dem Absturz öffnen wollte, meistens direkt geöffnet und InDesign funktioniert ohne Probleme. Beim nächsten Dokument kann man glück haben, dass es funktioniert, aber es kann auch wieder hängen bleiben.

  • Can you help with InDesign CS5 index problem?

       This is my first attept at creating an Index. I've pretty much tried everything I can think of to get this index to work properly. I think I might have made some fundamental errors in creating this document. I created a document and not a book. I placed 5 text files without linking them. I thought I could simply use the index panel and enter my words from the toc and front matter and InDesign would find all the occurences in the document. But when I ran the index I got the toc pg numbers and the index pg numbers only, i.e., Illumination vi-225 (p225 being the index pg). So far I have:
    reentered all the index entries to using the "whole document" because I had originally chose "This page" for each entry - that didn't work
    then I threaded the 5 text files thinking that might work - nope!
    then I saved the file as a book and tried using that - that didn't work.
       And yes, I have searched the Adobe CS5 help books, videos, online sites, etc. I'm hoping it's something simple! I would truly appreciate any help with this. Thank you!
       Sue

    You don't have any Shape layers, so you won't have any fill or stroke options.  If you had a rectangle and line layer, you have either deleted them, or caused them to be rasterized.  That would also remove any Fill and Stroke options from the Options bar.
    The 'little camera' at the bottom of the Tool bar, is the Quick mask icon.  Clicking on it toggles between standard and Quick mask modes, like you said.  Clicking on it is exactly the same as hitting the q key.  It has absolutely nothing to do with Shape layers.
    What you need to do now, is regroup.  What exactly are you trying to achieve, and what do you expect to see in your Workspace?  You will have noticed that your workspace is context sensitive.  It automatically changes according to what tools are selected, or what function you are using at any particular time.

  • Need some help in after effects cs5

    hello i have a problem in after effets cs5 whit this green cross over the vid andits stays like that even when i render it . can some on help me fix this?

    Seeing that you're using CC Particle World, you may want to try re-instal
    ling AE. If the software is properly licensed, it should work without the x.

Maybe you are looking for