I need a how to video on assemblying an HP Pavilion G7 model LF161UA Laptop.

Does anyone know where I may either view or download a video I may view of an HP Pavilion G7 Model # LF161UA being assembled, I have viewed one being disassembled, now I need to view a video assembling one, that is a HP Pavilion G7 series model # LF161UA, need immediately please, thank you - Greg from CFT.

The end of this one shows reassembly after motherboard replacement.  https://www.youtube.com/watch?v=ZMVW2jniITk Run the video backwards; seriously. Steps are steps in either direction. 

Similar Messages

  • How to obtain windows 8 on a Pavilion 15" and 17" laptops

    Hi there,
    The stickers are long since gone from my laptops, having owned them for 6 months now.
    Early on in ownership I installed windows 7, however windows 7 is not supported and I've had a huge amount of trouble getting support so am trying to get back to windows 8 now :-)
    How do I go about getting windows 8 back on my laptop when it came with win8 as the factory installation? Rights to one Win8 installation per unit is included in the price of each laptop  correct?
    Thanks and kind regards,
    Dean
    This question was solved.
    View Solution.

    Hello @Karmatose,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are looking to load Windows 8 on your notebook computers, and I would be happy to assist you in this matter!
    First things first, you'll need to obtain recovery discs in order to install Windows 8 for each computer. This can be acquired by following the steps in this document on Obtaining HP Recovery Discs or an HP USB Recovery Drive. Once you have the necessary discs, please follow this resource on Performing an HP System Recovery (Windows 8). This should help install Windows 8 on both computers.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HT4108 How do I connect I 4 phone to Satellite model Toshiba Laptop. Tried connecting via normal charging cable into laptop & when try to open the web am advised 'The device has been disconnected or unavailable'. Amaysim is carrier.They have tethered phon

    How do I connect i 4 to Satellite model Toshiba laptop. Tried connecting via cable via normal charging cable. When try yo open web advised 'this device has been disconnected or unavailable' AMAYSIM is carrier & advise they have tethered phone & should work?

    Hi qwerty,
    Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

  • How do I install memory into the Pavilion 17z-F2 series laptops?

    How do I install memory into the Pavilion 17z-F (17z-F200, product L2H13AV) series laptops?
    HP appears to have no maintenance guide available for this model series. What's up with that?
    Please, do not offer the generic (and out-of-date) Pavilion 17 Notebook PC Maintenance and Service Guide. It does not appear to apply to the 17z-F series. This guide instructs to remove the bottom service panel which I could have figured that out on my own. However, the 17z-F series does not appear to have any removable panels at all. I took an up-close look at the Pavilion 17z-F100. And, it does not have any removable panels on the underside, except for the battery. So, I presume the 17z-F200 to be the same.
    I am a computer technician. And, this is the first laptop I have seen without any service panels. I am probably going to have to disassemble the entire outer-shell to install memory (or to replace the hard disk drive once the time comes). But, every laptop I have worked on in the past had its own special array of hidden screws or special tricks for disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
    This question was solved.
    View Solution.

    How about this one:
    Pavilion 17z Manual
    Don't get me started on this. It's one of my pet peeves, too. HP is not the only one doing this. Acer and Toshiba, etc. also are selling "closed" systems now. I hate it. I will absolutely never knowingly buy one but I am spending a lot of time here answering questions just like this. Good luck and let us know how you do. Sounds like you will be fine. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

    I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

    Welcome to Apple Support Communities
    That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
    This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

  • Hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

    hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

    The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
    How to Transfer Photos from an iPad to a Computer
    http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
     Cheers, Tom

  • I am taking an online course and need to download instructional videos from the site how do i do this

    I am taking an online course and need to download the videos to my Imac.  How do I do this....new to the mac world

    Did you look in your downloads folder? If you are using Safari to download then look at Safari - Preferences - General and look in where it says Save downloaded files to. If you have left it to the defaults download folder you will find that under ~/downloads the ~ means your home folder. You can find that in Finder.
    I know you are to OS X so you are probably just unlearning some old bad habits. I'd recommend book marking and using:
    Mac 101
    Switch 101
    Find Out How Video tutorials
    List of Useful URLs for switchers

  • How much external disk space is needed for editing HD video?

    If I'm using FCE:
    1) How much external disk space is needed for editing HD video:
    if I downloaded 150mins of HD video? and
    do editing with it which will have an output of 120mins.
    Now PC, going to a MAC user soon   Windows XP  

    Hi(bonjour)!
    As a rule of thumb for HDV editing, use those numbers:
    12 to 15 meg/second for capturing ( your project is 150 minutes long, so 780 meg/minute, or 117 to 125 Gig).
    If you do any editing, add transition, video effect, add 12 to 15 meg /second to the total.
    As your project will have to be rendered for the print to tape operation, calculate 12 to 15 meg/second for all the length of your final movie. Add this amount to the total. (example: a 60 minutes movie : 49 Gig).
    If you want to burn a DVD on your Mac, calculate 3 to 4 meg/second for downconversion to DV material if you check "self-contained" in quicktime export dialog. (example: your finished project is 60 minutes long : 10.8 Gig)
    iDVD itself needs 3 to 4 times this amount if you want flawless operation.
    Finally, if you use your internal hard disk for all this storage (it's not a good idea to capture on the same drive where Mac OS X belongs), your Mac OS needs some spare room to breath (doing caching, etc), and your hard drive must have a least 25% of free space to avoid file's fragmentation.
    As hard drive's price drop, get the maximum size you can afford. 250 Gig is a good choice if you want to do just one project of 90 to 150 minutes at the time.
    Michel Boissonneault

  • I have an IMAc 5 with OS 10.6.8.  I am having trouble doing a iDVD.  Can I remove photos from iphoto to an external device to free up space on my computer?  what do I need and how do I do it?

    I have an IMAc 5 with OS 10.6.8.  I am having trouble doing a iDVD.  Can I move photos in iphoto to an external device to free up space on the computer?  What do I need and how do I do it?

    Hey William Dofflemyer,
    Thanks for the question. I understand you would like to move some photos in your iPhoto library to free up space. The following article may help you with that:
    iPhoto '11: Move your iPhoto library to a new location
    http://support.apple.com/kb/PH2506
    Also, I understand you have some questions about iDVD. The following video may provide more information:
    Apple - Find Out How - Movies - iDVD ’08
    http://www.apple.com/findouthow/movies/idvd.html
    Thanks,
    Matt M.

  • I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

    I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

    Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

  • Question -  how i can prevent assembly order rescheduling when in VA02 ?

    Hi                                             ( ECC 6.0)
    I am working with assembly orders.  In sales order create - the system creates an assembly order - requirements type = dynamic order.
    If i amend the sales order a few days later - the system reschedules the assembly order - even when the assembly order is started and has status REL = released.  I get error CO061 - start date in past.. as the system first backwards reschedules and then reschedules forwards.
    Question -  any ideas how i can prevent assembly order rescheduling when in sales order change VA02 ? I need the system  to check the production order status and if = REL then prevent the rescheduling.  Putting a change block on the production order does not work as it ultimately breaks the link between sales:assembly order.
    I am thinking i need to use an SD user exit to read the assembly order and prevent order changes if the assembly order is = REL.
    thanks in advance
    Graham.

    Hi Ram
    We are using dynamic link.  My original solution was to set the 'nochange' on release- however if the sales order qty changed - or the dates changed - or indeed any ATP check was performed - the link was sometimes lost - dependant on user keystrokes.  VA02 still calls assembly order change in this scenario - and the user gets the mesage that no change is present - and ATP returns 0 qty.
    What I think i can use is user exit  EXIT_SAPLCOEXT_001 in conjunction with a user status.  I plant to set the status 'block' on release - although configure it to have no action.  In the user exit - called in the interface between sales / assembly order - I plan to check the assembly order for this status and set the error condition if the status is set.  In debug mode - setting the eror manually - this appears to work as the system never calls assembly order change and accepts the assembly order date/qty as 'supply' in the atp check.
    thanks for you assistance.
    regards
    Graham

  • How the Video BIOS works in Windows.

    Hello,<o:p></o:p>
    I was looking at the hardware resources assigned to my graphics card and noticed the memory range usually mapped for the video ROM C0000h
    - C7FFFh was not assigned to the card.<o:p></o:p>
    I looked into it and found that the ROM had been disabled. I know the video BIOS isn't used any more as it runs
    in a 16 bit environment and device drivers are used to access the hardware. What about when Windows is running in an SVGA mode using VESA BIOS Extensions (VBE), for example when loading the splash screen or if a display driver can't be loaded. Doesn't
    Windows need to use the Video BIOS for this?<o:p></o:p>
    I disabled my graphics adapter so that Windows was using the VGASAVE driver and the ROM was still disabled. I'm just wondering
    how this works?
    So basically my questions are does Windows disable the video BIOS and if so how does Windows use the graphics card and VBE in SVGA modes without being able to use the video BIOS?
    Any help would be appreciated,
    Thanks.
    <o:p></o:p>

    Hi,
    How’s everything going?
    If you could update us at your convenience that would be wonderful.
    Yolanda Zhu
    TechNet Community Support

  • I need HTML5 how do I get it on my ipad

    I have been told by yahoo7 that I need HTML5 to run videos etc how do I get this or use something else to view yahoo7 previous tv programs.

    Actually what you're being advised is you need flash, which is not available on iPad.  In fact, Adobe stopped all support of Flash on ALL mobile devices being sold today, whether Apple or not.
    There are apps, such as Photon or Puffin in the App Store you can download which do with some success permit the viewing of videos requiring flash.  There are browers, which you would open the Yahoo site in and it will likely work for you.

  • I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing incase an answer is contested. We will need to stop recording and access the footage as the day progresses. Any suggestions?

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

  • I need help with my videos now that I downloaded the ios6.  It won't play.

    I need help with my videos. I downloaded the ios6 and now they won't play.  Does anyone know how to fix?

    Wanted to let everyone know that after looking at other discussions I did a hard reboot and it is now working.  Love this site!

Maybe you are looking for