I need a keyring (that works with network-manager)

Hi there,
I'm new to Arch linux (coming from Ubuntu) and I'm wondering how to set up a keyring that works with that gnome-network-manager applet and ssh(fs). I previously used GNOME and the gnome keyring, and all out of the box.
I couldn't find any manuals on how to set up the gnome-keyring in Arch linux, neither regarding ssh(fs) nor network-manager. I read people are complaining about network-manager asking for the keyring-unlocking-password, but this doesn't happen for me.
How do I set up the gnome-keyring propertly?

siriusb wrote:moljac024:
https://bugs.launchpad.net/wicd/+bug/377471
From this bug page:
The /etc/wicd/wireless-settings.conf file is made root-readable only. This means that any malicious users must have root access or physical access to the machine. In either of these cases, you have far more problems than worrying about the wireless network key.
Please see http://developer.pidgin.im/wiki/PlainTextPasswords for a very good explanation as to why the passwords are not encrypted.
It may be plain text, but only root can read/write.

Similar Messages

I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

I need a keyboard that works with IOS 7, Any ideas?

I have tried two different keyboards,one from Belkin and one from logitech...neither one works with IOS 7....I need a keyboard that works...anyone have any ideas?

I have the apple mini wireless keyboard. Works!

Need digital camera that works with Quicksilver

I need a relatively cheap digital camera that will work with a G4 Quicksilver. I know I'll probably have to get a used one, but that's OK. I just have no idea which older brands or models will work with a Power Mac. Anybody have any suggestions?

Cameras often allow a direct USB cable connection to a computer. This could possibly lead to compatibility problems, depending upon the requirements for each camera.
For cameras with a flash memory card slot (many modern models have one), an alternative solution would be to use an appropriate USB memory card reader connected to the computer. One could then move the memory card (for example, SD or CompactFlash) to the USB reader. The transfer is usually relatively fast, and no power is drawn from the camera batteries. The G4 should not have difficulties reading files from memory cards.
Jan

I need a router that works with Apple eMac OS 10.3 and is WEP encryption capable.

The WRT54G router has been recommended by TV provider Sky Angle. (I will receive Sky Angle over my DSL modem and must send signal to my TV via wireless router.)
But, I use an Apple eMac running OS 10.3. 1GHz that the router must be compatible with. And, before I buy, I want to get the fastest, newest, compatible version of a wireless router in hopes it will work with any new Apple lap top that I hope to get. Please help! I can't find any way to ask this question to the LINKSYS web site or company. Additionally, what is "G" mode or "N" mode: that might be important in the ultimate model of router to buy.
Thanks very much for any help.

You can buy WRT300N. For more information on this product you can browse website www.linksys.com

Need MEMO ActiveX that works with Forms5.0

Has anyone embedded a memo activeX in their Forms application? I
have been looking for a control that has all the typical
properties of a memo text control i.e. word wrapping etc but
sofar the ones that I have tried do not work properly. The main
problem is that the controls do not respond to the NextItem
command (TAB) when inside forms. Any hints?
Thanks,
Kristinn Gudmundsson
null

Thanks Jochen,
I will try that.
Best regards,
Kristinn
Jochen Kutscheruk (guest) wrote:
: Hi Kristinn,
: I think there is only one possible way:
: You have to catch the TAB-Event from the ActiveX-Control
: inside Forms. Have you tried the OLE-Importer and seen
: such an event?
: The only thing you need then is an ON-DISPATCH-EVENT-Trigger
: with the text "dispatch_event(RESTRICTED_ALLOWED);" attached to
: the ActiveX-Item and to modify the forms-generated Package.
: Locate the procedure where the TAB-Event is caught and just
write
: a "go_item(xxx);" there.
: That should work fine. But you will have definitely no chance
if
: your ActiveX does not expose this TAB-Event.
: Good luck
: Jochen
: Kristinn Gudmundssona (guest) wrote:
: : Has anyone embedded a memo activeX in their Forms
application?
: I
: : have been looking for a control that has all the typical
: : properties of a memo text control i.e. word wrapping etc but
: : sofar the ones that I have tried do not work properly. The
main
: : problem is that the controls do not respond to the NextItem
: : command (TAB) when inside forms. Any hints?
: : Thanks,
: : Kristinn Gudmundsson
null

I need a toolbar that works with firefox 5

I need to get a toolbar that is compatible to Firefox 5, can you help me? since I downloaded Firefox 5 this problem started.

Which toolbar?
Google needs to update the Google Toolbar program for Firefox 5.0.
The Google Toolbar '''7.1.20110512W''' version does work in Firefox 5.0 by using the Compatibility Reporter extension, I tried it myself due to the large number of postings about GTB problems. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

[SOLVED]Modem-manager won't start with Network manager

Hi,
I have a problem with getting modem-manager work under gnome. After first Arch install to this laptop, Network manager didn't show my 3G-modem, so I installed modem-manager and usb_modeswitch. Modem is Huawei E367 and it works well with wvdial. Only problem is to get it working with Network manager.
From output of dmesg I see that there is an error, when Network manager is trying to start modem-manager:
[ 3224.705193] do_trap: 322 callbacks suppressed
[ 3224.705198] modem-manager[3112] trap int3 ip:7ff7baab4143 sp:7fff996e62b0 error:0
[ 3224.719275] modem-manager[3114] trap int3 ip:7f58f4c5e143 sp:7fffc82b2400 error:0
[ 3224.733880] modem-manager[3116] trap int3 ip:7f579dda4143 sp:7fff77910850 error:0
[ 3224.748789] modem-manager[3118] trap int3 ip:7ff752c6f143 sp:7fff8ae42e20 error:0
[ 3224.763501] modem-manager[3120] trap int3 ip:7fb4db83f143 sp:7fff3023cbf0 error:0
[ 3224.777865] modem-manager[3122] trap int3 ip:7fa17a33a143 sp:7fffc1628260 error:0
[ 3224.792165] modem-manager[3124] trap int3 ip:7f00a39fb143 sp:7fff075a0fb0 error:0
[ 3224.806603] modem-manager[3126] trap int3 ip:7f9a62e23143 sp:7fffc2ccfed0 error:0
[ 3224.820736] modem-manager[3128] trap int3 ip:7f3d2994d143 sp:7ffff2581340 error:0
[ 3224.834985] modem-manager[3130] trap int3 ip:7f5adda9a143 sp:7fff8a70a4a0 error:0
From /var/log/messages.log I found also something:
Apr 14 16:02:14 localhost NetworkManager[713]: <info> trying to start the modem manager...
Apr 14 16:02:14 localhost dbus[651]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Apr 14 16:02:14 localhost dbus[651]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Apr 14 16:02:14 localhost NetworkManager[713]: <info> modem-manager is now available
Apr 14 16:02:14 localhost modem-manager: libhal_ctx_init() failed: (null)
Apr 14 16:02:14 localhost NetworkManager[713]: <info> the modem manager disappeared
If I try to run modem-manager manually with debug:
$ sudo modem-manager --debug
** ERROR **: libhal_ctx_init() failed: (null)
Make sure the hal daemon is running?
So it seems to be because of hal isn't running, if I try to start hal daemon it fails:
$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
I also tried to start hal at boot by putting it to DAEMONS in rc.conf. but didn't start either.
The laptop is Asus X61SL with x86_64 version of ArchLinux.
Kernel: 3.3.1-1-ARCH
Would be cool if anyone can solve this.
Last edited by Jompu (2012-04-14 20:42:20)

Thanks for your quick reply Strike0!
I ran lsusb and usb_modeswitch as you instructed:
[louis@Louis-Laptop ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 002 Device 002: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0
Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 001 Device 006: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
[louis@Louis-Laptop ~]$ sudo usb_modeswitch -v 12d1 -p 1506 -M '55534243123456780000000000000011062000000100000000000000000000'
Password:
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 006 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x82 (in)
Not a storage device, skipping SCSI inquiry
USB description data (for identification)
Manufacturer: Huawei Technologies
Product: HUAWEI Mobile
Serial No.: not provided
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x82
Resetting message endpoint 0x01
-> Run lsusb to note any changes. Bye.
It didn't help. Network manager doesn't show anything related 3G.
I don't think it's usb_modeswitch since 3G stick works great with wvdial on same system. Could it be a bug on modem-manager?
I start only the Network manager on boot, but while Network manager tries to start modem-manager, it throws error continuously in dmesg. Error is the same as in first post.

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remo

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil.

"The Ipad is on a short cable to my projector."
Get a longer cable?

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

I have an airport extreem network that works with two MacBooks. I am trying to get my PC (IBM ThinkPad) to connect to the network. The PC has airport for the PC downloaded but it will not recognize the network. Any suggestons please!

I have an airport extreem network that works with my two MacBooks and a iMAC. I am having no luck in getting a PC (IBM ThinkPad0 that has the PC airport software to be recognized by the network. Any suggestions?

When you introduced the AirPort Extreme, you had a condition where you have two routers in series. The simpliest solution is to reconfigure the downstream router (in this case the Extreme) as a bridge. This will allow the upstream router to provide the required NAT & DHCP services to all network clients regardless of which router they are connected to.
To reconfigure the Extreme as a bridge, you will use the AirPort Utility. (Note: I will provide the steps for using AirPort Utility v5.x)
AirPort Utility > Select the AirPort > Manual Setup
Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode)

What i need to install on new computer - has program that work with Oracl

hi
what i need to install on new computer that has program that
work with Oracle 11.2 ?
the database is on the server and the new computer connect to the server.
can i get link for download this ?
thanks in advance

thanks for the help !
but so many downloads..... what to download ?
i don't find any client 11g to download
i need to download the full Oracle 11g for this ?
can you send me exactly what to download ?
thanks in advance

I have Maverick is there anything like Canopus 200 that works with Maverick. I have 80 VHS's from the 1980's I need to cook?

I have Maverick is there anything like Canopus 200 that works with Maverick. I have 80 VHS's from the 1980's I need to cook?

my son is using the Hauppage PVR2 + HDPVRCapture recording (endlessly…) his Playstation3 sessions. Same combo can be used to connect any DVD or VHSplayer to a Mac and transfering/digitize private recordings.The Hauppage offers hdmi- or component-IN…
… got it at eBay for ~70€ plus 30€ for the software....
I'm using MacOS 10.9… works like charme…

Need a wireless usb adapter that works with my iMac G4 Flatscreen

I have an iMac without an airport card. I am trying to find a thrid party solution. Does anyone know of a third party wireless usb adapter that works with my Mac?
Linda

Hi Bill I noticed that list you posted mainly shows devices that require purchasing 3rd party drivers from companies such as ioxperts.
If you use a device that has ralink chipset you can use their drivers free of charge.
ralink drivers
Devices that use ralink chipsets

I need a USB Headset with Mic to use for Webinar's and Go To Meeting sessions. There looks to be very few options that work with the Mac as they seem to be designed for Windows. Any suggestions on equipment?

I am looking for a binaural USB headset with microphone to use during Go To Meeting sessions and Webinar's. Seems to be little that works with the iMac and most of the web searches have not been encouraging. Any suggestions on units that work. I have a new iMac running Snow Leopard 10.6.8.
Bob

I am looking for a binaural USB headset with microphone to use during Go To Meeting sessions and Webinar's. Seems to be little that works with the iMac and most of the web searches have not been encouraging. Any suggestions on units that work. I have a new iMac running Snow Leopard 10.6.8.
Bob

I need a keyring (that works with network-manager)

Similar Messages

Maybe you are looking for