I need a MMS tutorial or understanding

When someone sends a MMS to you, in essence they are sending it to [email protected] for all purposes this is a email box, is there a way to set the iphone email client to read this inbox box and retrieve your MMS without using viewmymessage.com, or do I have a zero understanding of this? I understand we can send this method but why not retrieve?

This is probably the most intelligent solution to the MMS/iPhone issue I've seen yet
lets the SMS STAY just MMS.. and lets you send them to an e-mail box that " wont" change or go away ( which is what could happen if you were to forward them to another e-mail account[change ISP's decide you get too much spam there, whatever.. etc] ) however with it sent to a mail account you coudl check it thru there, beable to download it as well as view it ON the phone ( since it seems viewmymessage.com REFUSES to work for MOST people over EDGE.. works with wifi tho .. ) if AT&T still wants to keep the revenue model for the text .............. send a notification to the SMS that they have a mail waiting with a MMS message attached to it .....
this way ..... AT&T keeps the text messaging charges up , apple gets to keep the phone " clean" ( the SMS client is for SMS .. not MMS ) and lastly .. and seemingly the LEAST important..... we users get to get our freakin messages without jumping thru hoops ..

Similar Messages

  • Need free good tutorial

    Hi
    I need a good tutorial about setting up flv playlist, with
    thumbnails, full
    screen button opltion and all thins in progressive download
    mode
    is there something like this for free?
    thanks

    Hi
    Go to
    here scroll thru the Archive
    list you'll find what ya need.
    Hope it helps

  • Need a Mail tutorial

    I'm trying to transfer my several email accounts from Mail in OSX10.4.11 to Mail in OSX10.6.8. I've installed my entire OSX and all software in less time than I've spent trying to get my Mail accounts across.
    I need a Mail tutorial. Not one that tells you how to use it, but one that explains what all the options do and how the various mailboxes operate. For instance, I've got three versions now of each account: one at the top under MAILBOXES, one in the middle under IMPORTED, and one at the bottom named with the name I assigned it. What a mess.
    Any suggestions as to a detailed tutorial that explains all this stuff?

    Thanks Kurt for all your suggestions. I've passed a couple of Helpful Answers your way.
    Since your last response a few weeks ago I've played around with Mail some more, but it became too much of a mess. There appears to be no easy way to set up a POP account in Mail unless you happen to know all the appropriate server settings. Even when you change to POP, Mail keeps calling the account an IMAP account. After 2.5 GB of unnecessary uploads and downloads (Mail was trying to synchronise, or whatever you call it, and I didn't want it to), I gave Mail the boot.
    Turns out there was a one-word solution to my problem: Thunderbird. I downloaded it, installed it, opened it, chose the POP option, entered user names and passwords for five accounts, and Thunderbird consulted its database and entered the appropriate settings. Then I imported all my emails from Mail, copied them to the appropriate folders, and that was it. Worked first time.
    I don't like tossing Apple software, but for me, Mail was too difficult to set up.
    To anyone else who reads this thread and has difficulty with Mail, my suggestion is: try Thunderbird.
    CCCloner
    Re why I don't use CCC. Well, actually I do, occasionally. But as incremental backup software, it is too slow for my liking – about 1/10 of the speed of SilverKeeper (SK). CCC is slow because it makes absolutely sure that files are identical, something I don't need; whereas SK simply checks modification dates and file size. It's worked for me for almost a decade, keeping track of >50,000 of my files (backed up to 4 hard drives), and I've never lost anything.
    A few years ago I contacted Mike Bombich, the author of CCC, about the speed difference. He agreed that CCC would be significantly slower than SK for the reasons listed below. According to Mike, SK uses method (b) whereas CCC uses Method (c), explaining why CCC is so much slower for my backups -- because 36,000 of my 58,000 files (that then existed) have "extended attributes" which were probably resource forks.
    For the purpose of this conversation, though, the gist is that you have many files that have two data structures -- a data fork and a resource fork. Each of these data structures can change independently of each other. Resource forks, however, do not have modification dates -- the modification date of a file only refers to the data fork. As a result, backup utilities have a choice among three methods for determining whether to backup the resource fork as they scan your filesystem:
    a) copy every resource fork, every time, just to be on the safe side
    b) copy the resource fork of a file whenever the data fork of the file changes, or when the size of the resource fork has changed
    c) compare a checksum of the resource fork on the source and target to determine if the resource fork has actually changed.
    Aside from the above, the primary reason I don't clone is because an active OSX can be altered by opening it and using it, whereas a disk image of an OSX can't be changed. I prefer to make a disk image of my OSX partition, store it on my hard drives (the disk image gets backed up by SK, along with the rest of my data), and when I need to restore from it, I can be certain that the resulting OSX is pristine.
    It's a bit like printing a book that was laid out in InDesign. You never send the "live" InDesign file to the printer (dangerous to do that) because the layout could change. You export to PDF from InDesign, then send the PDF to the printer. I treat OSX the same way: from a pristine OSX I "export" (clone) to a disk image, then "print" (restore) from that image.
    Once again, thanks Kurt for all your help.

  • Need ABAP Objects Tutorial

    Hi,
    I m very new in ABAP Objects.
    So I need ABAP Objects tutorial.
    Plz give me.
    Thanks
    Deep Sama

    hii
    follow the links
    For basic stuff......
    abap oops
    http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
    http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
    http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
    ABAP Business Development and Service Provisioning/ABAP Objects
    General information
    What is Object Orientation?
    some blogs
    A small tip for the beginners in OO ABAP
    Object Oriented ABAP (OO-ABAP)
    and others wiki OO Abap
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.geocities.com/victorav15/sapr3/abap_ood.html
    http://www.brabandt.de/html/abap_oo.html
    Check this cool weblog:
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
    /people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
    /people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    these links
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    For funtion module to class
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
    for classes
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
    for methods
    http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
    for inheritance
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
    for interfaces
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
    some sap doc
    ALV Gird Control (BC-SRV-ALE)
    SAP Container
    SAP Control Framework
    SAP Picture (BC-CI)
    SAP Textedit
    And if you can find a lot of information at SDN Blogs, I suggest you these ones: /people/dirk.feeken/blog/2007/07/06/abap-trial-version-for-newbies-part-17--your-first-abap-object, https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0a33479c-0b01-0010-7485-dc8c09d6bc69, https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3e59b790-0201-0010-88aa-bc8a7f95f6fb and https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3412d190-0201-0010-aaaa-ff5a315ae5fe.
    cheers,
    sharad.

  • Need a quick tutorial on how to do a "Clean Install" with SL

    Need a quick tutorial on how to do a Clean Install on a MBP 17" (circa)_ 2007 with SL
    I do have it backed up on Time Machine but need to know the correct way of going about doing it correctly.

    Check out: http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf
    If you wanting to do a 'clean install', check out the "Restoring your computer to factory settings" on page 4

  • I need a COMPLETE tutorial on how to make a smart playlist with 'conditions'

    Ok, I have read discussions in the Support Communities, looked on iTunes Help and I think my brain is going to explode. I need a simple (for dummies) tutorial on how to create a smart playlist with 'conditions' and Live Updating. For example: instead of going through my Library music list and unchecking all my Christmas music and all my Comedy stuff so it won't play year round and at innapropriate times and having to skip them manually when playing on my ipod touch or my iphone4 in my car or through headphones or home sharing and using my AppleTV.
    Also, if my comedy is individually all unchecked (in my iTunes Library), and I have a regular playlist in my ipod and one in my iphone (titled Comedy), when I go to the playlist list in my ipod or phone (when not connected to my Mac), and select shuffle: will that playlist play all the way through even though they are all unchecked?
    AND, if I have 'sync only checked songs and video' box UNCHECKED in my summary page for a device what exactly does that do? Or more precisely, WHY would I want or not want that box to be checked?
    I really hope someone can help me as I am a complete idiot when it comes to understanding long explanations.

    katinak67 wrote:
    AND, if I have 'sync only checked songs and video' box UNCHECKED in my summary page for a device what exactly does that do? Or more precisely, WHY would I want or not want that box to be checked?
    If the box is unchecked, it won't do anything. It will sync everything.
    If it is checked, songs that are unchecked will nto get sync'd to the iPod.
    katinak67 wrote:
    For example: instead of going through my Library music list and unchecking all my Christmas music and all my Comedy stuff so it won't play year round and at innapropriate times and having to skip them manually when playing on my ipod touch or my iphone4 in my car or through headphones or home sharing and using my AppleTV.
    Select all the Christmas stuff, right click - get info.
    Set the sure the Genre is Christmas.
    Go to the Info tab and set Skip when Shuffling to Yes.
    Do the same for Comedy.
    Create a new smart playlist (named My Music or something similar).
    Match all rules;
    Genre is not Christmas.
    Genre is not Comedy.
    Play this playlist on the iPod/iTunes to listen to everything except Christmas & Comedy.
    Or if you have Shuffle turned on, just listen to anything and Christmas & Comedy will get skipped.
    Also, if my comedy is individually all unchecked (in my iTunes Library), and I have a regular playlist in my ipod and one in my iphone (titled Comedy), when I go to the playlist list in my ipod or phone (when not connected to my Mac), and select shuffle: will that playlist play all the way through even though they are all unchecked?
    It depends.
    In iTunes, unchecked items will get skipped.
    If unchecekd items get sync'd to the iPod (you do NOT have Sync only cheked items ticked), they will play unless you have them set to Skip when shuffling.

  • Need Help in trying to understand class objects

    I need help on understanding following problem.I have two files for that, which are as follows:
    first file
    public class Matrix extends Object {
         private int  matrixData[][];     // integer array to store integer data
         private int    rowMatrix;     // number of rows
         private int    colMatrix;     // number of columns
         public Matrix( int m, int n )
         {       /*Constructor: initializes rowMatrix and colMatrix,
              and creates a double subscripted integer array matrix
              of rowMatrix rows and colMatrixm columns. */
              rowMatrix = m;
              colMatrix = n;
              matrixData = new int[rowMatrix][colMatrix];
         public Matrix( int data[][] )
         {     /* Constructor: creates a double subscripted integer array
              and initilizes the array using values of data[][] array. */
              rowMatrix = data.length;
              colMatrix = data[0].length;
              matrixData = new int [rowMatrix][colMatrix];
              for(int i=0; i<rowMatrix; i++)
                   for(int j=0; j<colMatrix; j++)
                        matrixData[i][j] = data[i][j];
         public int getElement( int i, int j)
         {      /* returns the element at the ith row and jth column of
              this matrix. */
              return matrixData[i][j];
         public boolean setElement( int  x, int i, int j)
         {     /* sets to x the element at the ith row and jth column
              of this matrix; this method  should also check the
              consistency of i and j (i.e.,  if  i and j are in the range
              required for subscripts; only in this situation the operation
              can succeed); the method should return true if the operation
              succeeds, and should return false otherwise.
              for(i=0;i<rowMatrix;i++){
                   for(j=0;j<colMatrix;j++){
                        x = matrixData[i][j];
              if(i<rowMatrix && j<colMatrix){
                   return true;
              else{
                   return false;
         public Matrix transposeMatrix( )
         {     /*returns a reference to an object of the class Matrix,
              that contains the transpose of this matrix. */
         Verify tata;
         Matrix trans;
         //Matrix var = matrixData[rowMatrix][colMatrix];
         for(int row=0;row<rowMatrix;row++){
              for(int col=0;col<colMatrix;col++){
              matrixData[rowMatrix][colMatrix] = matrixData[colMatrix][rowMatrix];
         trans = new Matrix(matrixData);
                         return trans;
         public Matrix multipleMatrix( Matrix m )
              /*returns a reference to an object of the class Matrix,
              that contains the product of this matrix and matrix m. */
          m = new Matrix(matrixData);
              //Matrix var = matrixData[rowMatrix][colMatrix];
              for(int row=0;row<rowMatrix;row++){
                   for(int col=0;col<colMatrix;col++){
                        //trans[row][col] = getElement(row,col);
         return m;
         public int diffMatrix( Matrix m )
              /*returns the sum of the squared element-wise differences
              of this matrix and m ( reference to the formula in the description
              of assignment 5) */
         return 0;
         public String toString(  )
              /* overloads the toString in Object */
              String output = " row = " + rowMatrix + " col="+colMatrix + "\n";
              for( int i=0; i<rowMatrix; i++)
                   for( int j=0; j<colMatrix; j++)
                        output += " " + getElement(i,j) + " ";
                   output += "\n";
              return output;
    Second file
    public class Verify extends Object {
         public static void main( String args[] )
              int[][] dataA = {{1,1,1},{2,0,1},{1,2,0},{4,0,0}}; // data of A
              int[][] dataB = {{1,2,2,0},{1,0,3,0},{1,0,3,4}};   // data of B
              Matrix matrixA = new Matrix(dataA);     // matrix A
              System.out.println("Matrix A:"+matrixA);
              Matrix matrixB = new Matrix(dataB);     // matrix B
              System.out.println("Matrix B:"+matrixB);
              // Calculate the left-hand matrix
              Matrix leftFormula = (matrixA.multipleMatrix(matrixB)).transposeMatrix();
              System.out.println("Left  Side:"+leftFormula);
              // Calculate the right-hand matrix
              Matrix rightFormula = (matrixB.transposeMatrix()).multipleMatrix(matrixA.transposeMatrix());
              System.out.println("Right Side:"+rightFormula);
              // Calculate the difference between left-hand matrix and right-hand matrix
              // according to the formula in assignment description
              double diff = leftFormula.diffMatrix(rightFormula);
              if( diff < 1E-6 ) // 1E-6 is a threshold
                   System.out.println("Formula is TRUE");
              else
                   System.out.println("Formula is FALSE");
    }My basic aim is to verify the formula
    (A . B)' =B' . A' or {(A*B)tranpose = Btranspose * A transpose}Now My problem is that I have to run the verify class file and verify class file will call the matrix class and its methods when to do certain calculations (for example to find left formula it calls tranposematrix() and multipleMatrix();)
    How will I be able to get the matrix which is to be transposed in transposeMatrix method (in Matrix class)becoz in the method call there is no input for transposematrix() and only one input for multipleMatrix(matrix m).
    please peeople help me put in this.
    thanking in advance

    Please don't crosspost.
    http://forum.java.sun.com/thread.jspa?threadID=691969
    The other one is the crosspost.Okay, whatever. I'm not really concerned with which one is the original. I just view the set of threads overall as being a crosspost, and arbitrarily pick one to point others toward.
    But either way
    knightofdurham... pick one thread and post only in
    the one.Indeed. And indicate such in the other one.

  • Can't open After Effects clips in FCP 7.  Need a fix (and to understand why it happens)

    I filmed some footage for a short film on a Gopro3, at 2k, 24p.  I loaded it into After Effects (mac), removed the fisheye affect and exported it as a 1080p, H264, mov file.  I did this to be able to remove the fisheye affect (caused by the gopro factory lens), yet have enough "information" to not lose quality in the correction.
    Now I am looking to import this clip into FCP 7 to edit but FCP won't open.  I get an error.
    FCP 7 doesn't seem able to open it.  Also, this always happens when the AE file comes out of a PC, and often happens when coming out of a mac AE prog.
    My first question is, why does this incompatability issue come up?  What's going on with the codec or file structure details, what causes this?  I really want to understand the details because I'm always using various cameras, equipment, etc and need to be able to carefully plan equipment choices and workflow.
    My second (just as important) question is how to fix it this.
    Thanks.
    Will.

    FCP doesn't work with H.264 files. It might bring it in, or it might not. It might seem like it's working, but then sync drifts. It might look like it's fine, but when you export different sections jump to other clips. It's unpredictable. 
    FCP 7 and H.264 do not mix.
    If you are exporting files out of AE on a PC, then look at exporting them as DNxHD...the Avid codec. or Cineform. Then the FCP user will need to install the Avid codec or Cineform in order to see the file, but then they should convert it again to ProRes 422...as working with non-FCP codecs in FCP can be problematic.  I recommend those formats over the others, like ANIMATION or UNCOMPRESSED...because of the file size issues. 
    If you are using AE on a Mac, the same computer as FCP...then export as ProRes right away. Done and done.

  • Need Help with the General Understanding WebUtil's Configuration

    We resently installed the following software so that we could migrate our 6i client-server forms to 10g web forms:
    1) Oracle Developer Suite 10.1.2.0.2 for Windows (B24499-01, B24500-01)
    2) Oracle Oracle Application Server Forms and Reports Services 10.1.2.0.2 for Solaris (v8)
    We plan to do development on the Windows side and then deploy our Web Forms to the Unix server.
    In reviewing Section 2.1 the follow documentation on WebUtil,
    http://www.oracle.com/technology/products/forms/htdocs/webutil/web_util.pdf, I
    learned that WebUtil will be installed and configured when installing Oracle
    Developer Suite 10g (10.1.2).
    I've found this to be true on our Windows installation as I was able to search and find the webutil.pll and webutil.olb file in the forms directory after installation.
    However, I'm unclear whether it was installed and configured on the Unix side because neither webutil.pll and webutil.olb are found in the forms directory on the Unix server.
    Does the fact that we are developing on Windows, but deploying to the UNIX server mean that we only have WebUtil installed and configured on the Windows-side of things?
    Once we have WebUtil working in our Windows Development Environment, we simply need to move the .pll and .olb to the Unix server and compiled them under the forms directory so that they are there when we deploy our forms on the Unix server?
    I'm very confused here. Can anyone provide me a dumbed down explanation for a first time Web Form developer?

    Don't worry I wasn't sure as well, I had to raise a SR to understand it too!
    I have a similar set up to yours and have webutil working successfully.
    What you need to do is to install and configure your application server on unix for webutil as well as windows.
    From your post I see you are already reading the docs. Within chapters 2 and 3 both of which are titled "configuring web util", you will see points that refer to the application server, these are the ones that you need to follow.
    Good luck

  • Need help about tutorial demo file

    I dont understand the (Object) word in the 15th line of the IteratorDemo class of the tutorial J2SDK
    Please find above the source code.
    Thank for any help.
    //display 13 cards using iterator interface
    public class IteratorDemo implements java.util.Iterator {
    private String[] cardNames = {
    "2", "3", "4", "5", "6", "7", "8", "9",
         "10", "Jack", "Queen", "King", "Ace" };
    private int current = 0;
    public boolean hasNext() {
    if (current == cardNames.length) {
    return false;
    } else {
    return true;
    public Object next() {
    return (Object)cardNames[current++];     // what (Object) means?
    public void remove() {
    throw new UnsupportedOperationException();
    public static void main(String[] args) {
    IteratorDemo i = new IteratorDemo();
    while (i.hasNext()) {
    System.out.println(i.next());

    return (Object)cardNames[current++];
    cardNames[...] which is an String Object is changed as if it were an Object by word (Object)
    so the type of return value of this function is not an String Object again but become Object
    this kind of statements commonly called CASTING

  • Need a Little Help with Understanding How Layers Work in PSE

    I have PSE version 5 and I am using it on a PC with Windows XP.
    As I get more into editing photos, I am enjoying it, but confusion is also starting to set in.  My question is about layers.  When I go to edit a photo for web/email use only, I start by resizing it to 72 ppi and then reducing the pixel dimensions quite a bit.  Then after that I normally go through this process of editing the photos by using normally about three different commands.  One is Levels, then I may go to Shadows/Highlights, and then my last command is always sharpening.  I used to do this all on one layer, but then finally learned to put each one of these editing features on their own layer so I can make changes/deletions without too much trouble.
    When I started doing the separate layers, I was just making a copy of the background layer each time and then touching that particulay layer up with Levels, Sharpen or Shadows/Highlights.  But I noticed that depending on the order in which the layers were placed, some changes would be obscured.  If I put the Levels layer on top, and then the Sharpen layer and the Shadows/Highlight layer below that, the sharpen effect and the shadows/highlights effects were no longer there.  I could only see the levels effect.  The photo was still not sharp and so on.  If I put the Sharpen level on top, then the photo showed the sharpen effects, but now the Levels and Shadows/Highlights effects were no longer visible.
    So then I started to make a copy of the background initially, do a levels adjustment here, then, instead of making a copy of the original background layer again, I would make a copy of the layer that now has the levels changes on it.  Then do the sharpen effect on this layer.  This way I had all the changes on one layer as long as I put that layer as the top layer.  But then I realized that I once again fI didn't have a layer with only one fix on it.   Finally, I started to use an adjustment layer for Levels, put this as the top layer, make a copy of the background layer, do shadows/highlights, copy background layer again, do sharpen, and this seems to work a little better.  But even with this way, depending on what order I place the sharpen and shadows/Highlights layers, one of them still seems to get obscured by the layer above it.
    Can someone help me to understand how layers work in this regard.  I am obviously a little confused here.
    Thanks,
    Lee

    You really aren't working efficiently. First of all, do your editing on a full sized version of the photo, since you have more data for PSE to work on and will get better results. Use save for web to make your web/email copy when you are totally done. You can resize it down on the right side of the save for web window.
    Duplicating a regular layer makes an opaque layer that obscures the layers below it. It's best to start off by not working on your original image, so that you don't have to worry if you mess up. If you're working on a copy, you can work right on the background layer, or only duplicate the layer once and apply your changes to that. So you'd apply both shadows/highlights and sharpening to the same layer.
    Finally, you should use an adjustment layer for levels. Layer>New Adjustment Layer>Levels. This will put levels on a transparent layer above your image, but you will need to click the layer below it to get back to a pixel layer to apply other changes (you can't sharpen an adjustment layer, for example).

  • Need Help with Tutorial!  Hachures/Clipping Mask?

    Hi All, I am really struggling with this step of this awesome tutorial.  I am not quite understanding how the end result of the below steps is achieved.  Here are the instructions for each step (paraphrased):
    1) Create a triangle, make it slim, duplicate it many times and group it.
    2) Shows end result of step 1
    3) Place the object over the area that you want hachures. Make a trace on the area you want to be filled using the pen tool.
    4) Make a clipping mask on it
    5) (end result) Repeat the same procedure.
    I have no problem making the triangles, but I got stuck after that step.  I made a trace over the area, but I get stuck after making a clipping mask.
    I know the pictures below are small, please go to the original link and scroll down to see the referenced steps in bigger form (sorry, numbers are not referenced in tutorial, but it is somewhere towards the middle of the page):
    http://abduzeedo.com/create-badass-gas-mask-illustrator
    Thanks in advance!

    Mylenium, after reading your post I went back, you were right (duh) my clipping mask wasn't closed and I did not have it as the top most layer.
    Monika Gause, I will try and be a bit more clear with my questions in the future.  I am sure it is pretty obvious, but I am a noob in a lot of ways!
    I love this forum, thanks to both of you!

  • I need help with tutorial

    HI
    I'M using winXP home
    I installed this into VARIABLE VALUE
    so when the tutorial says
    type javac in the command window. "For the HelloWorld tutorial"
    i just get the error message then i checked the link for the error I get
    it says to enter the "path bellow" into variable value.
    is this the only place i need to add this to?what do i change it to
    C:\Program Files\Java\jdk1.6.0_<version>\bin
    1.C:\Program Files\Java\jdk1.6.0_01\bin
    2.C:\Program Files\Java\jdk1.6.0\b105
    3.C:\Program Files\Java\jdk6\bin
    4.C:\Program Files\Java\jdk-6-windows-i586-iftw
    or none of above
    this is the download I used jdk 6
    Can someone translate this to reality.
    tutorial just does not help at all
    no matter how close i follow it to this part.
    thanks

    Directory of c:\Program Files\Java
    03/24/2007 10:19 PM <DIR> .
    03/24/2007 10:19 PM <DIR> ..
    03/21/2007 08:59 AM <DIR> Deployment
    03/24/2007 10:19 PM 271 HelloWorldApp.java
    03/21/2007 05:32 PM <DIR> j2re1.4.2_03
    03/22/2007 03:44 PM <DIR> j2re1.4.2_13
    03/22/2007 03:11 PM <DIR> jdk1.6.0
    03/21/2007 08:42 AM <DIR> jre1.5.0_06
    08/22/2006 08:33 PM <DIR> jre1.5.0_08
    03/22/2007 03:10 PM <DIR> jre1.5.0_10
    03/24/2007 09:55 PM <DIR> jre1.5.0_11
    1 File(s) 271 bytes
    10 Dir(s) 98,416,029,696 bytes free
    C:\Documents and Settings\DWH>
    Do the jdk files need to be unziped or extracted first
    i look at them they look like blue filing cabnets they are zipped
    Message was edited by:
    revest

  • Need JMS topics tutorial

    Hi
    I need to create a WebLogic JMS topic and read messages from it. Need a step-by-step tutorial, searched the web, no help. If any one knows a good tutorial on this, pl let me know. Even a tutorial on JMS Queues would help.
    thanks
    a s

    Here are the steps for you. If you need anymore help let me know.
    Configure a JMS server.
    2.1 AdminServer and dizzy1 are running.
    2.2 Navigate to dizzyworld Services Messaging JMS Servers. Lock the
    console.
    2.3 Click New under the JMS Servers table and specify the following properties:
    Name: dizzyworldJMSServer
    Persistent Store: (none)
    2.4 Click Next and target the JMS server to dizzy1 Managed Server. Click Finish.
    2.5 Activate your changes.
    Configure a JMS module and add a queue and a topic to the JMS module.
    3.1 Navigate to dizzyworld Services Messaging JMS Modules. Lock the
    console, if necessary.
    3.2 Click New under the JMS Modules table and specify the following properties:
    Name: dizzyworldModule
    Descriptor File Name: dizzyworldModule
    3.3 Click Next and target the module to the dizzy1 Managed Server. Click Next and
    select the following:
    Would you like to add resources to this JMS system module?
    3.4 Click Finish.
    3.5 In the Settings for dizzyworldModule page, click the Subdeployments tab. Under the
    Subdeployments table, click New to create a subdeployment with the following
    specifications:
    Subdeployment Name: dizzy1SubDeployment
    Click Next.
    3.6 In the Targets page, select the dizzyworldJMSServer as the target under the
    JMS Servers table. Click Finish.
    3.7 Click the Configuration tab.
    3.8 In the Settings for dizzyworldModule page under the Summary of Resources table,
    click New to configure a new JMS queue for the JMS module.
    3.9 In the Create a New JMS System Module Resource page under the heading of
    Choose the type of resource you want to create, select Queue.
    3.10 Click Next.
    3.11 In the JMS Destination Properties, specify the following parameters:
    Name: dizzyworldQueue
    JNDI Name: dizzyworldQueue
    Template: None
    3.12 Click Next.
    3.13 Click Advanced Targeting. Select dizzy1SubDeployment from the
    subdeployments list. Click Finish.
    3.14 In the Settings for dizzyworldModule page under the Summary of Resources table,
    click New to configure a new JMS topic for the JMS module.
    Contents Page 70 of 143
    mhtml:file://C:\Documents and Settings\RTiwari\Desktop\Weblogic_9.2_LAB.mht 11/3/2008
    3.15 In the Create a New JMS System Module Resource page under the heading of
    Choose the type of resource you want to create, select Topic.
    3.16 Click Next.
    3.17 In the JMS Destination Properties, specify the following parameters:
    Name: dizzyworldTopic
    JNDI Name: dizzyworldTopic
    Template: None
    3.18 Click Next.
    3.19 Click Advanced Targeting. Select dizzy1SubDeployment from the
    subdeployments list. Click Finish.
    3.20 Activate the changes.
    You should be able to see JNDI entries on the dizzy1 managed server called
    dizzyworldQueue and dizzyworldTopic.
    Thanks
    Togotutor
    <b><a class="jive-link-external" href="http://www.togotutor.com">http://www.togotutor.com</a> (Learn Programming and Administration for Free)</b>

  • I need a flash tutorial on Iphone style Scrolling Photo Gallery using Next/previous Buttons

    Here i have attached two sample Fla files of  iphone style scrolling photo gallery using next Previous buttons. Smoothscroller.fla is the  original file download from internet and thumbscroll.fla is the one i m trying to make. But i m getting the actionscript error in the movieclip symbol 2 frame 2 actionscript frame. Can anyone work out on my file & send me the easiest tutorial of flash so that i can complete my portfolio project.
    Mail me ur tutorials at : [email protected]

    Just Google for the Spry photo gallery and you might find
    http://cates-associates.net/tutorials/Tutorial-CS3-Spry.html
    or even a few others.
    Happy Sprying
    Ben

Maybe you are looking for