I need a monitor to access to older psd documents in a G3 blue and white

I can't access older psd and illustrator files i ran on OS9

Hi,
Take a look at the upper PCI card of your Power Macintosh G3 blue and white. It should have a standard VGA (D-Sub 15) port, meaning that a whole range of monitors (Apple or third-party, both CRT and older LCD) can be connected. If an Apple monitor cable has a larger DB-15 plug, it is possible to use a Mac-to-VGA adapter.
BTW, since the computer apparently has been in storage for some time, check the condition of the 3.6 V logic board lithium battery. A low battery voltage can cause various difficulties.
Jan.

Similar Messages

  • I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

    I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

    I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
    OSX 10.10.3
    Best.

  • My older ibook g4 is locked up with an icon flashing. looks like a file folder flashing a blue and white face/question mark. what is this?

    my older ibook g4 is locked up with an icon flashing. looks like a file folder flashing a blue and white face/question mark. what is this?

    Apple's suggestions for dealing with the flashing question mark folder:
    http://support.apple.com/kb/TS1440?viewlocale=en_US
    Niel has summed it up pretty nicely.

  • Black and White monitor adaptor for connection to a G3 Blue and White?

    Hi, I have a Blue and White G3 Power mac and I also have a black and white G4 with a matching flat screen. Is there an adaptor available which allows me to connect my blue and white G3 to my black and white screen?

    If I make every assumption possible, I think you may be asking if you can use a white-with-gray Apple 17" flat panel display, which has only a digital video connector, in a stock Blue & White G3.
    There are two issues:
    1) The connector on the stock card does not mate with the connector on the display, and there is no cheap fix available.
    2) the display gets its power off the connector, and the Blue & White does not have a way or providing that power.
    Both can be solved together by using the Dr. Bott VGA-tor. But at US$300, it would be cheaper to buy a new display.
    http://www.drbott.com/prod/db.lasso?code=0151-VGAT
    The second approach requires two steps. First, upgrade your Video card to one that provides the Apple DVI connector. The use the Dr. Bott DVI-ator (US$95) to supply the external power:
    http://www.drbott.com/prod/db.lasso?code=0111-DVAD

  • HT4759 What Software do I need to install to access icloud on my Samsung Laptop

    What software do I need to install to access Icloud on my Samsung Laptop running windows7

    Windows 7 and iCloud Control Panel for Windows v1.1. Also, Apple (Canada) - iCloud - Learn how to set up iCloud on all your

  • I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

    I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

    Were you able to reset the account's password ? If not then how did you try to get it reset e.g. http://iforgot.apple.com (which would have sent it to the rescue email address if you have one on that account) ? You can also try contacting iTunes Support in your country to get it reset : http://support.apple.com/kb/HT5699
    And no, accounts can't be merged nor content transferred between accounts.

  • When I upgraded to the newer version of Firefox my add-on no longer showed at the bottom. How do I get the add-on to show at top and bottom? Do I need to go back to an older version?

    I upgraded Firefox to the newest version (4 I think it was from 3). Now my "add-on" no longer appears"at the bottom" of the screen, only at the top. Do I need to go back to the older version in order for the add-on to show at top and bottom? If so, how do I do that if I decide to do it?

    Your UserAgent string in Firefox is messed up by another program that you installed, and those websites don't know you are running Firefox 3.6.3 (which is what you do have installed).
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.'''
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
    Then restart Firefox

  • PowerMac 8600 Needs New Monitor

    I have an 8600 that needs a monitor. Exactly what type of adapter do I need to hookup a monitor (crt) to it?
    Thanks

    The signals involved:
    Red intensity and its ground
    Green intensity and its ground
    Blue intensity and its ground
    Horizontal Sync -- indicates start and end of one row of dots across the screen
    Vertical Sync -- Indicates start and end of one screenful of rows of dots
    ... can only be transposed from the typical
    "VGA-style" three-row 15 pin Male (with pins) connector on the cable-end to the
    Apple "two-row" 15 pin Female (with holes) connector on the Mac Display Card
    ... in one way that will work.
    The poorly-documented "feature" that will trip you up is that the Macs of that era expect a code on pins 4, 7, and 10 that tells the Mac what kind of display is attached. If no signals are asserted, grounded, or cross-connected with wires or diodes on those pins, the default of "No display attached" gives no picture.
    You need an adapter specific to the broad class of displays you intend to connect. There are over 17 different legitimate codes for Mac displays, but frankly, most of them are for obsolete displays. The most common still used are for VGA Display (640 by 480 and Super VGA 640 by 800) and Multiple-Sync display (640 by 480 and 832 by 624 and 1024 by 768 and possibly 1152 by 870) switchable on the fly. And it needs to be specific to older Macs and have the pins and holes on the correct sides. There are other adapters for a different problem that have the pins and holes reversed.

  • How do I access an older AX in a newer vesion of the Airport Utility?

    I have had an AX network for over 3 years and have had no problems with it. I just bought a new one to add to my network and I am having all kinds of problems now. Airport utility recognizes both units, but will not allow me to access the older one. It states "An error occured while trying to access the Apple wireless device. Make sure your network conection is valid and try again. Error -6765". Does anyone know what this means?
    I did a factory reset of the older unit and I am still having the problem. I thought if I could update the software on the older one that it might work, but it won't give me access to do it.
    Please Help!!!!!!!!!

    I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?

  • How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    Hello Arthur,
    Thank you for the reply.
    You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
    The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
    Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and  i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD ,  pen and paper and CDs .
    Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
    I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
    Thanks
    Amanda

  • How do I access an older version in the App Store?

    Does anyone know how do I access an older version of FCP X in the App Store to reinstall on an older computer that won't support this latest version? I recall minimum spec on older version being 2GB RAM (4GB recommended). Now it's 4GB minium (8GB recommended) and I cant install via my Apps Store account. I know upgrading RAM is an option but I am looking to get back the version I had running before I had to wipe & reinstall the laptop this past week as I'd prefer not to have to send money on this older machine (2008 unibody MacBook with 3GB RAM)
    Thanks in advance for any help/advice (or offers of cheap but reliable UK based RAM sources)

    iBungie,
    I hate to say this, but Apple would like you to buy, a new MacBook, or iMac, or new Mac Pro
    That way, you can do, what they want you, to do.
    I've noticed a change in their business practices, over the last 4 yrs.
    I tried to update to FCPX.1, but was told I would have to update the OS to 10.9 from 10.7.
    When I updated from 10.6.x to 10.7 I lost the use of 5 3rd party software programs.
    I do not want to lose, the use of other programs, by updateing the OS to 10.9.
    Been a Mac user for over 25 yrs. Lived in Cupertino before and during the growth of Apple.
    Meet both Woz & Jobs, during the late 70's & early 80's.
    If you can afford a new system, then do. If not, look at systems from around 2012 that can handle the RAM, plus they will still have optic drives and hard drives. I have clients that want a disk.
    Any way good luck.
    RussA

  • I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight.

    I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product. 

    Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
    * tax not included.

  • I'd like to know if it's possible to access an older version of a web page in Firefox.

    I'm wondering if it's possible to access an older version of a webpage I've since made changes to -- the site is through Livejournal.com -- in order to see the information that was on the older page. I'd like to keep it consistent with the new page, but am not sure how to do this. I very stupidly didn't save a copy of the old page!

    If you know where the page is at, I myself don't see any reason why you can't access it.
    The only thing I could think was if Livejournal.com had a lock on the page or if you had to sign-in and your u/n and p/w had expired.
    I'd say go ahead and at least try.
    davewdan

  • HT5085 I have purchased an app from iTunes and now it won't allow me open it? What do I need to do to access this app on my mac?

    I have purchased an app from iTunes and now it won't allow me open it? What do I need to do to access this app on my mac?

    Nothing. iOS applications can't be run on a computer.
    (103423)

  • My boyfriend who has an iPhone 5 just had his phone stolen, he has an iCloud account with find my iPhone app downloaded but we do not have access to a computer only the safari on my iphone 4s, where do I need to go and what do I need to do to access his

    My bitfriend who has an iPhone 5 just had his phone stolen, he has an iCloud account with find my iPhone app downloaded but we do not have access to a computer only the safari on my iphone 4s, where do I need to go and what do I need to do to access his

    You need to download the free Find my iPhone application from the App Store.

Maybe you are looking for

  • CMOS / RTC Battery for Satellite A100-326?

    Hi, I'm after a replacement CMOS/RTC battery for my A100-326 I've got my machine open and located the battery but it has no model number on it. I have contacted a Toshiba assistance center and they replied that the battery is part of the board and th

  • What do I do if Mail keeps rejecting my password and I cannot find it anywhere?

    I just bought a new Mac mini Lion OS. Everything was going well until I tried to set up my mail account. Even on my old Mac I was getting continual messages to enter my password and no password I tried was accepted. This was going on for the past mon

  • Use Data Socket vi's to write to a custom namespace OPC server.

    Hi there, I'm still having the following problem: I'm trying to write an OPC tag to my OPC server that is currently not existing in the servers name space. Normaly (with other OPC clients) the server fires an event that validates and adds such unknow

  • Exchange 2010 and Office 365

    Haven't been able to find a definitive answer from our friends at Microsoft or Google, so here goes!I have a client (lets call the Client A) with onsite SBS Server (Exchange 2010 SP3) of 50 seats. The client has multiple meeting rooms, defined as res

  • Where is HR Sample Schema Script for APEX 2.2

    Just installed APEX 2.2 and am reviewing the 2-day developers guide. In there they give many examples based on an HR sample schema which they say can be downloaded from http://www.oracle.com/technology/products/database/application_express/code/hr_sa