I need a new Macbook...but I also need to run Snow Leopard

If I buy a new macbook Pro or Air, can I install SL on them?
If not, what portable (year made) that I can buy and install SL?
thanks

1) as long as the app is supported by Maverick
2)  yes, you can run SL in emulation in a virtual machine, with SL as the guest and 10.8/10..9 as the host.
I ran 10.6 in a virtual machine with 10.7 as the host:

Similar Messages

  • I need to run I need to run snow leopard and lion on same computer?er

    I have a Mac Pro and a extra internal hard drive that I would like to put lion on the extra one and run snow leopard on my original one and be able to boot from either one. How does one go about doing this or is it possible?

    OPTION key will continue to work.  Can alspo be used to select an external clone (CarbonCopyClone, $40 download) backup to boot in case of HD failure.  AND OPION key can be used to select the "Recovery Partition" of Lion in case you need it (Command-R also accesses the RecoveryPartition).
    A welath of OPTIONs ... really. 

  • IMac i7 need to install snow leopard NOT Lion - Will it allow the install of 10.6?

    I have a bit of a quirk to deal with, a client has a Snow Leopard Network but just recently had a replacement iMac i7 delivered for a previous box from earlier in the year. The IT Contractor is stating that the machine can only take Lion and will not install Snow Leopard. The problem is there is some FileMaker issues that have come up with some deep level custom functions that have exposed a critical problem and the machine needs to run Snow Leopard. This would be until the work around is developed for the software solution or FMI comes out with the next version of FileMaker resolving the issue.
    Is the IT Contract full of it ? If not is there a way to force the iMac i7 to accept a Snow Leopard installation ?

    For years Macs have not be able to run earlier versions of OS X than they originally shipped with so this is nothing new. It also makes a lot of sense when you think of it, one of the reasons Mac's run so well is the software and hardware are optimized to run well together. Attempting to install an earlier version of OS X than what the machine was designed for is technically possible but it also comes with significant risks because you're then dealing with a system that wasn't designed to run well together...in other words you're emulating the MS Windows world.  While there can be some temporary inconvenience as you're experiencing in this case  Apple makes these decisions for a reason. While not always obvious to we end users but there are good reasons none the less.

  • Will the new MBP still run Snow Leopard?

    I am considering buying a new MBP, but I need to know if it will run SL?  Does anybody know?

    The Early 2011 MacBook Pro being sold can still run Snow Leopard, I have such a machine here.
    There is no hardware/driver difference as yet, perhaps not for long. Apple is keeping it's downgrade options open for now.
    Just c boot off the 10.6.3 Snow Leopard install disk, use Disk Utility to erase and reformat the whole drive (deletes the Lion Recovery Partition) and install.
    Make sure to make bootable copies of the Snow Leopard install disk
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    As you know, the Retail Disks of OS X don't contain the free iLife that comes with new Mac's (in the past on the grey disks or now on MAS)
    I don't care much for Lion, less than stellar GUI's can be had for a lot less in hardware costs.

  • Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't  let me access it

    Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't  let me access it so anyone can help me with it or can i put another apple id to it without putting the first password?THANKS FOR YOUR HELP.

    Then call AppleCare and talk to someone in account security.

  • My Macbook Pro has just had a new hard drive put in it but i still need to install snow leopard without a disk?

    My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
    Thanks

    You might be in a bind. While is is normal for new Macs that shipped with Lion to omit a system installation DVD, yours was running Snow Leopard. Apple included a system installation CD or DVD for every computer that shipped with every computer through Snow Leopard. Lion was installed on every machine built starting about August 2011, ending the DVD era.
    Apparently your computer had been sitting in someone's inventory for a while, but that's no excuse for them to have removed the DVD from its box.
    Try booting Lion Internet Recovery. Read this:
    http://support.apple.com/kb/HT4718
    I suspect Lion Recovery may not work since "your computer's eligibility for Lion will be verified with Apple" and you appear not to have purchased it.
    Please let me know what happens when you attempt to boot Lion Recovery.

  • HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

    So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error. 

    A wag at this.  A port issue?
    "Apple Push Notification network setup
    When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
    be open."
    http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
    google: ports ios configure ipad
    Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
    Robert

  • I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

    IS THE SITUATION HOPELESS
    I used Target mode to transfer files to a new i7  iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
              Please tell me how to get this disc to eject !

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant.  The files show up on the new MacBook but cannot be opened.  Thanks!

    How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant?  The files show up on the new MacBook but cannot be opened.  Thanks!

    Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

  • I have an ipad I used with a computer which's now broken. I bought a new Macbook Pro and signed into iTunes with my usual Apple id and pw. I connected my ipad to the new Macbook but it won't back up my photos or Apps from the ipad to the new macbook. Help

    I have an ipad I used with a computer which's now broken. I bought a new Macbook Pro and signed into iTunes with my usual Apple id and pw. I connected my ipad to the new Macbook but it won't back up my photos or Apps from the ipad to the new macbook. Help

    What do you mean " back up my photos or Apps"?
    The photo sync is one way - computer to ipad.
    You can transfer itunes purchases.  Without syncing:  File>Transfer Purchases
    Copy everything from your backup copy of your old computer to your new one.

  • I have a new time capsule, want to use it in conjunction with iMac G5 and MacBook; laptop runs Snow Leopard  but G5 can't install Snow Leopard, is stuck at OS 10.4.11.  Am I doomed?  Can anyone advise me?  Thanks..

    I have a new Time Capsule, want to  use it in conjunction with an iMac G5 and a MacBook.  MacBook runs Snow Leopard, but G5 (lacking Intel processor) can't install Snow Leopard, is stuck at OS 10.4.11.  Am I doomed?  Will appreciate any advice.  Thanks.

    you should still be able to get a copy of Mac OS X 10.5 (Leopard), which should run on your G5.

  • Hi I've just bought a Macbook pro (2010) I bought it as I needed an older one running snow leopard. Its running on 10.6.4 but I need it with 10.6.1 or 10.6.2, does anyone know if I can install 10.6.1 or 2 on my Macbook??????

    Hi I've just bought a Macbook pro (2010) I bought it as I needed an older one running snow leopard. Its running on 10.6.4 but I need it with 10.6.1 or 10.6.2, does anyone know if I can install 10.6.1 or 2 on my Macbook??????
    This is because I have a copy of Protools I want to run on it and it has to be 10.6.1 or 10.6.2
    Help I'm desperate!!

    The 2010 MBPs came installed with either 10.6.3, or 10.6.4 later in their lifespan. Earlier versions of the OS may not have the correct drivers for the Mac's hardware.
    Ultimately, you might be better off upgrading your copy of Pro Tools, or updating the Mac to Yosemite and running Logic Pro X.

  • Want to install Photoshop CS4 on my new macbook, but i'm receiving Fault 150:30. You should contact support from adobe :-(

    Hello,i want to install Photoshop CS4 on my new macbook, but i'm receiving Fault 150:30. You should contact support from adobe :-(
    I already tried every step on the support site, but Photoshop, Indesign and Illustrator still don't work. So this is an S.O.S. here...

    I've repaired many a 150:30 error using this method. First make sure your account is an Administrator type.
    When you type sudo <space> and drag LicenseRecover.py into the Terminal window, this is what you should see when you press Enter.
    Type in your admin password if any, and let the script run and finish.

  • Where are all the songs and whole albums i bought for i tunes? i have a new macbook but iTunes has none of my paid for music

    where are all the songs and whole albums i bought for i tunes? i have a new macbook but iTunes has none of my paid for music

    Your purchases won't automatically show in your new Mac's iTunes library. If you go into iTunes > Preferences and on the Store tab tick the 'show iTunes in the cloud purchases' then what you can redownload should show in the Music part of your library with a cloud icon against them - click on the cloud to download them. Or click on your name towards the top right of iTunes and then click Purchased on the popup, and you can redownload them from there.
    If you've moved countries since buying the music, or if the rights-holders have removed them from the store, then you won't be able to redownload them. In that case if you still have your old computer then you could copy them over from that (e.g. via an external drive : How to move your iTunes library to a new computer - Apple Support or via home sharing), or copy them from your backup of your downloads/library and add them via File > Add Too Library

  • HT1382 I've successfully backed up my old iTunes (from version 7.02) to a DVD. I'm hoping to restore it to my new Macbook, but when inserting disc to iTunes 10.7. it tells me that I've inserted a blank disc. What to do? Old iTunes7 does recognizes the dis

    I've successfully backed up my old iTunes (from version 7.02) to a DVD. I'm hoping to restore it to my new Macbook, but when inserting disc to iTunes 10.7. it tells me that I've inserted a blank disc so it does  not suggest to restore the content. What to do? The back up has definitely been a success as when inserting disc back to the old Mac and iTunes7, it does recognize the disc and suggests to add contents to the library.

    I've successfully backed up my old iTunes (from version 7.02) to a DVD. I'm hoping to restore it to my new Macbook, but when inserting disc to iTunes 10.7. it tells me that I've inserted a blank disc so it does  not suggest to restore the content. What to do? The back up has definitely been a success as when inserting disc back to the old Mac and iTunes7, it does recognize the disc and suggests to add contents to the library.

Maybe you are looking for