I need a on sql qury for this reqirment

transopse of the data only specific columns
i have one create table in oracle10g dba
in the table almost 10 fields there
i have 5 fileds as well as rows and remaing fields transopse of the fields
how to solve the problem in sql qury ?
Thank you
ashok

Ashok,
Post your question in SQL forum : PL/SQL
This is OBIEE Forum
Thanks,
Saichand.v

Similar Messages

Need PL/SQL code for this

Hi,
I need a PL/SQL code for this one...
Let me know if something is not clear...
1) The table CLOB_CLOBJECT_CDA has the columns described below...
Explaining only those fields which are important in this context
-- CDA_STEP_ID : Basically a Sequence
-- CLOBJECT_SOURCE1_ID : Every id has got a set of records
-- CLOBJECT_SOURCE2_ID : Every id has got a set of records
-- LVL : There are total 8 levels..
This is the main aim :
1) There are total 16 million rows..(limited to 10 rows here)
2) We need to go through level by level (LVL column) & insert the intersection records (CLOBJECT_SOURCE1_ID intersect CLOBJECT_SOURCE2_ID)
into another table...but this is how it goes..
Level (LVL column) 3's basically have CLOBJECT_SOURCE1_ID as level (LVL column) 2 CDA_STEP_ID's..
(consider the statement --** where CLOBJECT_SOURCE1_ID = 285 which is same as 1st insert statement step id)..
The above process goes for next levels until 8..(so have to use loops)
So for ex :
We go through the first insert statement and insert the insertion records only when both CLOBJECT_SOURCE1_ID & CLOBJECT_SOURCE2_ID has got records ..
If we don't find any records for both of them we should skip the corresponding step id when we go to the next levels...
Let's go through the 1st insert statement...
-- We have CDA_STEP_ID = 285 & two sources CLOBJECT_SOURCE1_ID as 19 & CLOBJECT_SOURCE2_ID as 74...
-- We see the table CLOBJECT_COUNTS & check whether we have counts for both 19 & 74 ..(In fact we insert counts into this table only if they have records)
-- If so, we insert the intersection records into CDA_MRN_RESULTS ( we do have counts for both of them..) with CDA_STEP_ID 285...
-- Then we insert the step id which is 285 along with the count into CLOBJECT_COUNTS..
Let's go through another insert statement...
-- Consider CDA_STEP_ID = 288 which has two sources CLOBJECT_SOURCE1_ID as 19 & CLOBJECT_SOURCE2_ID as 92...
-- We see the table CLOBJECT_COUNTS & check whether we have counts for both 19 & 92 ..(we have records for 19 but not for 92)
-- So we should not proceed with this..& also skip all those records (future records with increasing levels..basically level 3's) which have got 288 as CLOBJECT_SOURCE1_ID..
(As said earlier that the present CDA_STEP_ID will always be CLOBJECT_SOURCE1_ID in the next level)...
I wrote the following code which is after the statement...
Let me have the create & insert statements here..
create table CLOB_CLOBJECT_CDA
    CDA_STEP_ID           NUMBER,
    CDA_ID                NUMBER,
    CDA_SEQ_NUMBER        NUMBER,
    CLOBJECT_SOURCE1_TYPE VARCHAR2(3000),
    CLOBJECT_SOURCE1_ID   NUMBER,
    CLOBJECT_OPERATOR     VARCHAR2(3000),
    CLOBJECT_SOURCE2_TYPE VARCHAR2(3000),
    CLOBJECT_SOURCE2_ID   NUMBER,
    LVL                   NUMBER
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (285, 285, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 74, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (286, 286, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 75, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (287, 287, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 91, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (288, 288, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 92, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4869, 4869, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 91, 3); -- **
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4870, 4870, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 92, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4871, 4871, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 93, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4880, 4880, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 91, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4881, 4881, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 92, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4882, 4882, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 93, 3);
create table CDA_MRN_RESULTS
   CDA_STEP_ID      NUMBER,
MRN              NUMBER,
INSERT_DATE_TIME DATE
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 3, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 4, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 6, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (91, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (91, 3, to_date('19-10-2011', 'dd-mm-yyyy'));
create table CLOBJECT_COUNTS
CDA_STEP_ID    NUMBER,
CLOBJECT_COUNT NUMBER,
DATE_TIME      DATE
Insert into CLOBJECT_COUNTS values (19,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (74,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (75,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (91,2, to_date('19-10-2011', 'dd-mm-yyyy'));The output goes into two tables...
CDA_MRN_RESULTS : O/p of intersection records between source1 & source2 id
CLOBJECT_COUNTS : Step id with counts ...(useful for skipping next level step id's if either of source id has "0" counts)
Any help is appreciated..
Thanks..

I tried to code this..but looping takes a lot of time..I want to skip certain rows where source1_step_id & source_2_step_id are not in clobject_counts table as we proceed to the next levels..Not sure how to skip the rows..
declare
cursor c1 (p_level varchar2 ) is
Select * from clob_clobject_cda
    where lvl = p_level    ;
   TYPE V_TT IS TABLE OF C1%ROWTYPE INDEX BY PLS_INTEGER;
    L_TT V_TT;
    v1 number;
    v2 number;
    v_step_id number;
    v_operator varchar2(100) := '';
begin
for i in 2..8 loop
open c1(i);
LOOP
       FETCH C1 BULK COLLECT INTO L_TT LIMIT 500;
        FOR indx IN 1 .. L_TT.COUNT
         LOOP
           v1 := L_TT(indx).clobject_source1_id;
           v2 := L_TT(indx).clobject_source2_id;
           v_step_id := L_TT(indx).cda_step_id;
           v_operator := L_TT(indx).clobject_operator;
Execute Immediate ('Insert into cda_mrn_results Select --+ parallel (cm 128)
                                                  distinct ' || v_step_id || ', mrn, trunc(sysdate) dt from cda_mrn_results cm
                    where cda_step_id = ' || v1 || '
                    and   cda_step_id in (Select cda_step_id from clobject_counts) ' ||
     v_operator ||
                ' Select --+ parallel (cm 128)
                                                  distinct ' || v_step_id || ', mrn, trunc(sysdate) dt from cda_mrn_results cm
                    where cda_step_id = ' || v2 || '
                    and   cda_step_id in (Select cda_step_id from clobject_counts) ' );
Insert --+ Append
       into clobject_counts Select cda_step_id, count(distinct mrn),
                   insert_date_time dt from cda_mrn_results where cda_step_id = v_step_id   group by cda_step_id,insert_date_time;
   COMMIT;
         END LOOP;
       EXIT WHEN L_TT.COUNT = 0;
     END LOOP;
CLOSE C1;
End Loop;
Commit;
End;

Need pl/sql stmnts. for this simple logic

Hi,
I need PL/SQL program for this simple logic i am doing mistake somewhere unbale to trace
out ..
select * from GSR03_PO_DTL;
PO_NUM
L53177000 -- > no changes reqd (only one entry with new format)
L00041677 --> to be updated to L41677000(only one entry with OLD format)
L43677000 -- > no change reqd (exists one row with new format and old format like below)
L00043677 -- > to be deleted this is old format (and new format like above already exists)
EX:
L00012345 --- old format
L12345000 --- new format
Hope question is clear. I written the following program.
update is working fine but delete is not working.
Please help.
Thanks in Advance
Devender
declare
Cursor c_test is
(select po_num from GSR03_PO_DTL);
BEGIN
FOR r_test in c_Test
LOOP
dbms_output.put_line (r_test.po_num);
IF ('L'||substr(r_test.po_num,5,5)) = ('L'||substr(r_test.po_num,2,5)) then
     dbms_output.put_line ('delete stmnt');
END IF;
EXIT WHEN c_test%NOTFOUND;
END LOOP;
FOR r_test in c_Test
LOOP
IF r_test.po_num like 'L000%' then
IF ('L'||substr(r_test.po_num,5,5)) is not NULL then
     update GSR03_PO_DTL set PO_NUM = 'L'||substr(po_num,5,5)||'000'
     where po_num like 'L000%' ;
     dbms_output.put_line ('update stmnt');
END IF;
END IF;
END LOOP;
END;
*********************

No need for PL/SQL, man.
SQL> SELECT po_no FROM po1
2 /
PO_NO
L53177000
L00041677
L43677000
L00043677
SQL> UPDATE po1 y
2 SET    y.po_no = 'L'||substr(y.po_no,5,5)||'000'
3 WHERE y.po_no LIKE 'L000%'
4 AND    NOT EXISTS ( SELECT null FROM po1 x
5                      WHERE x.po_no = 'L'||substr(y.po_no,5,5)||'000')
6 /
1 row updated.
SQL> DELETE FROM po1 y
2 WHERE y.po_no LIKE 'L000%'
3 AND    EXISTS ( SELECT null FROM po1 x
4                  WHERE x.po_no = 'L'||substr(y.po_no,5,5)||'000')
5 /
1 row deleted.
SQL> SELECT po_no FROM po1
2 /
PO_NO
L53177000
L41677000
L43677000
SQL> Cheers, APC

Do I need to create a view for this?

Hi Ihave got 2 tables emp and project
In emp tabe:
emp_no
family name
given name
In porgect table:
emp_no
status(assigned,unassigned)
start_date
end_date
emp_no Family_name given_name
1 Smith John
In project table same employee can have many assigement eg
emp_no status start_date end_date
1 assigned 01-may-08 01-july-08
1 assigned 01-sep-08 01-july-09
1 unassigned 01-july-09 01-oct-09
In the form:
there are 2 querable fields "project ends between field1(date) and field2(date)" which is used to
retrive records which have end date between field1 and field2.
The following fields are needed to get from database:
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Requirements:
1. project.start_date and project.end_date must be the latest project_end_date for the same emp
so in the above sample date
2. No. of time assigned is a count of total of number records which have status='assign'
So for the given sample data the record expected after query would be(field1=01-jun-08 field2=02-july-09)
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Smith John 01-sep-08 01-july-09 2
What is the best approach to get:
1 The lastest project(latest end_date) for the emp
2. get No.of time assigned.
Do I need to create a view for this? If yes, any sample sql code this this?
Thanks for your help

Hi W1zard,
Thanks for your reply. Could you clarify the following points for me:
1.) you could create a master block basing on your emp table and a detail block basing on your project table with the relation over emp_no. set the default_where clause of your detail block programmatically using
set_block_property('project', default_where, 'status = ''assigned'' and <your_date_criteria>');
Q1: where I pit this code? in pre-query trigger in detail block?
2.) Of course you could create a view to join both of your tables if you don't want to use master detail blocks; Also do the join over emp_no
create or replace force view v_emp as
select emp.family_name, emp.given_name, project.start_date, project.end_date
from emp, project
where emp.emp_no = project.emp_no
Q2 As I mentioned before, there are multipal entries for the same emp in project table and we only need the maching record from project table which has latest end_date. So I think I need something like
max(project.end_date) somewhere in create view to make sure only one record for one employee.
Also is there possible to include the no. of assigned field(select count(*) from project where status='assigned' and emp=emp_no) into the view as well?
Q3 All the fields mentioned above are diaplay-only. So Can I create a control block which has all the fields from emp and project. Then populate them with my sql. The question is
where I put this customerised sql so when user click excute query. My sql will run and display one the form?
REally appreciated your help!
Michael

APP-ALR-04106: Please correct the user-defined SQL statement for this alert

Hi All,
I have created an alert for engineering module in R12. It got tested and was working fine. when the user testing it, while trigger the alert getting the error, "APP-ALR-04106: Please correct the user-defined SQL statement for this alert".
when verified the alert, it got verified and ran also. It parsed the query successfully and when run it fetched few records.
Need help in resolving the issue.
Thanks in advance.
Regards,
sri
Edited by: user10939296 on Jan 18, 2010 1:16 AM

Hi Sri;
I have already gone through the Note: 948037.1. But this note is related to 11i. The solution provided in the Note is for 11i.
I am facing this issue in R12. Is this patch applicable to R12?I belive its not. But u can check Solution part 4 for your instance, at least it can give you idea. The other note in metalink related bug and all for R11 too.
I belive its better way to rise Sr while waiting other forum user response to that thread
Regard
Helios

Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

APEX:Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

I am using Apex 4.2.2.00.11
am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

336554,
Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
57434

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Need my Email Address Switched for This Forum-Been Trying for a Week

Need my Email Address Switched for This Forum-Been Trying for a Week.
Can an Administrator PM me and switch it?
thank you!

See post here for more information, but this is officially resolved!
As of 09/29/09, you can now change your email address for the forum via My Settings even if you have a community-only id. Many thanks to the mods for this update!
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

I want sql query for this output

hi guys
could u tell how can i write sql query for this out put
i have one table like this
ID ACCOUTID TAX
1 1 A
2 1 B
3 2 C
4 2 D
5 3 E
7 NULL F
8 NULL G
MY OUT PUT MUST BE LIKE THIS
ID AID TAX
2 1 A
4 2 D
7 NULL F
8 NULL G
HERE IN THIS OUTPUT I SHOULD HAVE
MAXIMAM ID VALUE FOR A REPEATED AID VALUES
AND
THE ROWS AID VALUES IS NULL ALSO MUST PAPULATED IN THE OUTPUT.
I KNOW ONE SOLUTION LIKE THIS
SELECT MAX(ID),AID,TAX
FROM TABLE T
GROUP BY AID,TAX
UNION ALL
SELECT ID, AIC,TAX
FROM TABLE T
WHERE AID IS NULL;
BUT I WANT SAME RESULT WITH OUT USING LOGICAL OPERATORS.
COULD U PLZ TELL A SOL.

Will this help:
SQL> with t as
2    (
3      select 1 ID, 1 ACCOUTID, 'A' TAX from dual union all
4      select 2, 1, 'B' from dual union all
5      select 3, 2, 'C' from dual union all
6      select 4, 2, 'D' from dual union all
7      select 5, 3, 'E' from dual union all
8      select 7, NULL, 'F' from dual union all
9      select 8, NULL, 'G' from dual
10    )
11 --
12 select id, ACCOUTID AID, Tax
13 from
14 (
15    select t.*
16          ,count(1)       over (partition by t.ACCOUTID) cn
17          ,row_number()   over (partition by t.ACCOUTID order by id desc) rn
18    from t
19 )
20 where cn > 1
21 and (rn = 1 or ACCOUTID is null)
22 /
        ID        AID T
         2          1 B
         4          2 D
         8            G
         7            F
-- If I leave out the OR condition then you'll get this:
SQL> ed
Wrote file afiedt.buf
1 with t as
2    (
3      select 1 ID, 1 ACCOUTID, 'A' TAX from dual union all
4      select 2, 1, 'B' from dual union all
5      select 3, 2, 'C' from dual union all
6      select 4, 2, 'D' from dual union all
7      select 5, 3, 'E' from dual union all
8      select 7, NULL, 'F' from dual union all
9      select 8, NULL, 'G' from dual
10    )
11 --
12 select id, ACCOUTID AID, Tax
13 from
14 (
15    select t.*
16          ,count(1)       over (partition by t.ACCOUTID) cn
17          ,row_number()   over (partition by t.ACCOUTID order by id desc) rn
18    from t
19 )
20 where cn > 1
21* and rn = 1
SQL> /
        ID        AID T
         2          1 B
         4          2 D
         8            G
--which follows the description you've given, but not the output

Need SQL statement for this logic....

Hi,
I want a SQL statement for updating the following changed last number .
Cuurently its:
SELECT * FROM TEST;
LAST NUMBER     CHANGED LAST NUMBER
123518
12355265
123674659
9087648970
After updating with the required SQL statement table should look like
LAST NUMBER     CHANGED LAST NUMBER
123518          0000123518
12355265     0012355265
123674659     0123674659
9087648970     9087648970
the last number should be appended with ZEROs and the length of changed last number should be 10 always. Hope its clear.
Appreciate your help.
Thanks in advance
Devender

select last_number, lpad(to_char(last_number), 10 , '0') FROM test

Need help on SQL Statement for UDF

Hi,
as I am not so familiar with SQL statements on currently selected values, I urgently need help.
The scenario looks as follows:
I have defined two UDFs named Subgroup1 and Subgroup2 which represent the subgroups dependent on my article groups. So for example: When the user selects article group "pianos", he only sees the specific subgroups like "new pianos" and "used pianos" in field "Subgroup1". After he has selected one of these specific values, he sees only the specific sub-subgroups in field "Subgroup2", like "used grand pianos".
I have defined UDTs for both UDFs. The UDT for field "Subgroup1" has a UDF called "ArticleGroup" which represents the relation to the article group codes. The UDT for field "Subgroup2" has a UDF called "Subgroup1" which represents the relation to the subgroups one level higher.
The SQL statement for the formatted search in field "Subgroup1" looks as follows:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP1] T0 WHERE T0.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod])
It works fine.
However, I cannot find the right statement for the formatted search in field "Subgroup2".
Unfortunately this does NOT WORK:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT $[OITM.U_Subgroup1])
I tried a lot of others that didn't work either.
Then I tried the following one:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT T1.[Code] FROM [dbo].[@B_SUBGROUP1] T1 WHERE T1.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod]))
Unfortunately that only works as long as there is only one specific subgroup1 for the selected article group.
I would be sooooo happy if there is anyone who can tell me the correct statement for my second UDF!
Thanks so much in advance!!!!
Edited by: Corinna Hochheim on Jan 18, 2010 10:16 PM
Please ignore the "http://" in the above statements - it is certainly not part of my SQL.
Please also ignore the strikes.

Hello Dear,
Use the below queries to get the values:
Item Sub Group on the basis of Item Group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[U_GroupCod] =$[OITM.ItmsGrpCod]
Item Sub Group 1 on the basis of item sub group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[U_SubGrpCod]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp])
Sub group 2 on the basis of sub group 1
SELECT T0.[Name] FROM [dbo].[@SUBGROUP2] T0 WHERE T0.[U_SubGrpCod1]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp1])
this will help you.
regards,
Neetu

Any Sql Solution for this?

Hi guys,
How can I update rows which total upto the number of dollars the user enters.
Ex: I have the following rows in the table
Col1 Col2 Col3 Col4
1------10------A
2-------3------B
3-------7------C
4------20------D
5-------5------E
6-------5------F
I have a procedure which takes a user input (say 23). Now I need to update Col4 with EXT for all those rows which total to 23. So the result should look like
Col1---Col2---Col3----Col4
1------10------A------EXT
2-------3------B------EXT
3-------7------C
4------20------D
5-------5------E------EXT
6-------5------F------EXT
Had to insert dashes for formatting purposes...
Any solutions will be appreciated.
Thanks
John

Hi John,
Well, that's a very strange way to do it but if you must, there's no problem saying:
UPDATE TABLE SET Col4 = 'EXT' WHERE Col1 + Col2 + Col3 = 23;
However, I suspect you intend that the user may enter any number of values. If this is the case, you'd be much better off (in the relational world, anyway) entering a new row for each of the new values, viz:
User, Date, Input
1, 01/01/2003, 10
1, 13/01/2003, 5
1, 15/01/2003, 8
2, 19/01/2003, 20
2, 10/02/2003, 3
3, 4/01/2003, 21
Now you can say:
SELECT SUM (Input) Total, COUNT (Input) NrInputs FROM TABLE GROUP BY User HAVING SUM (Input) = 23;
... which works much better and will work for any number of columns. You don't even need the date column unless, for some reason, you need to order the input.
d.

Need help on Sql command for count

Hi,
I have the following table.
Temp_Set Table
ID Names Action
1 John Delete
2 John Add
3 Mary Update
4 Sim Add
5 Sim Update
How do I do a SELECT sql command for count(names) > 1 ?
Please kindly advise me. Thank you very much.

It doesnt work when I do this
SELECT * FROM Temp_Set
HAVING Count(names) > 1
It prompts me the following error:
ORA-00937: not a single-group group function
00937.00000 - "not a single-group group function"
*Cause:
*Action:
Error at Line:16 Column:7i am not sure but you can try this:
SELECT B.* FROM
(SELECT NAMES, COUNT(1) CNT FROM TEMP_SET GROUP BY NAMES) A, TEMP_SET B
WHERE A.NAMES = B.NAME
AND CNT > 1

My ical is not populating after i reinstalled my operating system - my Outlook 2011 is ok but I now want to sink my iphone 4 with my outlook and i presume i need ical to be populated for this

My ical is not populating after i reinstalled my operating system - my Outlook 2011 is ok but I now want to sink my iphone 4 with my outlook and i presume i need ical to be populated for this

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

I need a on sql qury for this reqirment

Similar Messages

Maybe you are looking for