I need a Paper or article which contain an overview of ORACLE SOA Stack

Hi
Hope you all be fine.
I should prepare a report about what Oracle offer on SOA .
so if there is a clean paper about Oracle tooling stack for building SOA please give me its link.
thank you

Hi
Thank you very much for the link.
i got two pdf from there.
i should prepare report for managers , and i should provide a comparesion between ORACLE and SUN stack :)
hope i could find enough resource there.

Similar Messages

  • I need to display a Report which contain -- del QTY  and  INV QTY   in one

    Hi ALL,
    I need to display a Report which contain
    <b>Customer  , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty  and There Values  in One Line  .</b>
    How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
    Do I need to right any Routines for this, if I am correct,  where I have to write that code and what is the code ,
    What are the Consolidation  routines ?????
    I am working on BI 7.
    Regards ,
    Shaik
    Message was edited by:
            shaik

    Frst check in backend, which all cubes have got data for each of three..
    Corresponding you can go ahead with Multi/Infoset..
    Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
    Hope it helps..
    Thanks for points assigned

  • I need to create a flyer which contains as example 33 lines of text in a column. All textlines have

    I need to create a flyer which contains as example 33 lines of text in a column. All textlines have to be underlined in a color. I tried this with „Absatzlinie darunter“ (might be „Paragraph line underneath“.
    The short-cut is „Command / Alt / J“, but nowhere I can see any information how to duplicate the underlines.
    By the way: I am a InDesign-Beginner; I used to work with QXP before for many years. Who can give me a hint – if possible in German? Thanks a lot!
    Dieter

    Guten Morgen!
    Zunächst herzlichen Dank für die Reaktion und die Tips. – Ich will da nicht
    nerven, aber ich bin erst seit kurzer Zeit mit InDesign zugange und stelle
    immer wieder fest, dass, je tiefer ich einsteigen will, immer mehr Fragen
    auftauchen. Es gibt auch so viele Begriffe, die sich von QuarkXPress
    unterscheiden, das ist ja furchtbar.
    Können wir vielleicht mal kurz direkt Kontakt über E-Mail aufnehmen? Auch
    mit dem Forum habe ich noch Probleme zurecht zu kommen. Ich würde gerne
    einen Screenshot senden, der mein "Problem" besser erkennen lässt.
    Schöne Grüsse
    Dieter Ullrich
    Von:  Willi Adelberger <[email protected]>
    Antworten an:  <[email protected]>
    Datum:  Mittwoch, 15. Januar 2014 20:34
    An:  Dieter Ullrich <[email protected]>
    Betreff:  I need to create a flyer which contains as example 33
    lines of text in a column. All textlines have
    Re: I need to create a flyer which contains as example 33 lines of text in
    a column. All textlines have
    created by Willi Adelberger
    <http://forums.adobe.com/people/Willi+Adelberger>  in InDesign - View the
    full discussion <http://forums.adobe.com/message/6016307#6016307>
    Wenn Du jede Zeile unterstreichen musst, dann sind Absatzlinien (Paragraph
    Rules) nicht dazu geeignet. Es gibt zwei Absatzlinien, eine unterhalb, eine
    oberhalb.Für das Unterstreichen aller Zeilen kann man nur die Auszeichnung
    „Unterstreichen” verwenden, das findest Du im Absatzformat unter
    „Grundlegende Zeichenformate” die Option „Unterstreichen”. Besser wäre es
    jedoch in der Absatzformatdefinition im Bereich ”´„Unterstreichungsoptionen”
    die EInstellungen vorzunehmen, weil dort feinere Einstellungen möglich sind
    und sogar zweifärbige Unterstriche möglich sind. Leider hat die
    Unterstreichungsfunktion gegenüber den Absatzlinien den Nachteil, dass
    Unterstreichungen nur unterhalb des Texts und unterhalb von Leerzeichen und
    Tabulatoren funktionieren, Absatzlinien können hingegen auch außerhalb de
    Rahmens angelegt werden und eine feste Länge bei allen Zeilen haben.
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed a screen image in your message please visit the thread in the
    forum to embed the image at http://forums.adobe.com/message/6016307#6016307
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either reply
    to this email or visit the message page:
    http://forums.adobe.com/message/6016307#6016307 To unsubscribe from this
    thread, please visit the message page at
    http://forums.adobe.com/message/6016307#6016307. In the Actions box on the
    right, click the Stop Email Notifications link.  Start a new discussion in
    InDesign at Adobe Community
    <http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
    Type=14&container=3359>  For more information about maintaining your forum
    email notifications please go to
    http://forums.adobe.com/thread/416458?tstart=0.

  • Adding pages to articles which contain alternate layouts

    If I have an article with alternate layouts set up and decide I need to add another page it does not seem to play nicely.
    In the pages palette  I have 2 columns iPad H and iPad V. If I create a new page under iPad H and try to give it an alternate layout I get a dialog saying "Alternate layout name cannot be blank, must be unique, and cannot end with a "*" or a ";" character." It will not let me save as iPad V as there is already a layout there so I save as iPad V2 but when I test on iPad the H page shows up in the layout but the V2 page does not.
    Does this mean I need to create new article to replace the old one, add all my H layouts to it and then create alternate layouts for each of these again?
    Cannot find a good tutorial on the subject.
    Message was edited by: RollDotHome

    Doesn't seem to work – something as simple as this! Screenshots show new page moved to end of doc and also what happens when I put after page 1.
    Also attached are pages prefs. Pages and spreads allowed to shuffle. Is this correct? Pages just dance around rather than staying put!
    Help very much appreciated, I'm probably missing something very obvious!

  • URGENT: advice needed re Oracle SOA Stack

    Astonished and perplex was I when I came across the following, a metaphor with Windows/Word is used here for a quick and better understanding.
    Picture us at the beginning of this millennium, the following translation is used in this picture:
    Oracle - Microsoft
    Application Server - Windows
    OC4J - DOS kernel
    WLS - NT kernel
    SOA Suite - Word
    AIA - Spell checker
    PIP - Grammar checker
    We want to buy a word-processor and we are looking which version of Word we should use in our company. Microsoft says in a statement of direction that new versions of Windows will be based on the NT-kernel, the DOS-kernel is considered End-of-Life. The latest Word versions available are 10.1.3.5 for windows 98 (DOS kernel) and 10.1.3.5.1 for windows 2000 (NT kernel). Here we choose windows 2000 as the platform with the supported Word 10.1.3.5.1, in order to follow the same direction as Microsoft states. So far so good.
    But now we would now like to buy the spell checker available for Word, Microsoft supports the spell checker for Word versions on Windows 98 and NT4 (all though NT4 only with spell checker, not the grammar checker), but it appears there is no supported spell checker for Word on Windows 2000 available!
    Furthermore Microsoft tells us it will not support a spell checker for the supported Word on Windows 2000, only the new version of Word coming later this year for Windows XP will have a supported spell checker. But that's not all, even it appears there will be no spell checker supported for the (last planned) release 10.1.3.5 of Word for Windows 98, only for the older Word version 10.1.3.4 (patch 8 or higher) for Windows 98.
    So in conclusion if we want to increase the quality of our work by using the AIA on top of the SOA Suite, we have to un-install SOA Suite 10.1.3.5.1 with Oracle Application Server 10.3 (WebLogic Server 10.3.1) and install the End-of-Life Oracle Application Server 10.3 (OC4J) with an older version of the SOA Suite (10.1.3.4 with patch 8 or higher).
    We can not wait for the AIA & PIP's for SOA Suite 11 to be released end of 2010 because we need our SOA environment ready asap (yesterday).
    This is the story I heard, now the question to you is how to advice this fellow to move on, what are the options and alternatives if there are any???
    Thanx in advance,
    Cheers,
    John

    Hi John,
    I can totally picture your perplex since we are also in similar situation. The answer to your question really depends on what your immediate needs are. Is it spell checker or the grammar checker you need yesterday?
    If you need spell checker then I think it's better to wait for few more months (Feb-Mar) and go with latest spell checker (AIA 3.0) on Windows XP/Vista/7 (WLS 10.3.2)
    Or if you really need grammar checker now for your business needs then you have no choice to go with grammar checker (2.4/2.5) on DOS (OC4J) then look to upgrade to grammar checker 3.0 on Windows XP/Vista/7 later this year or next year. DOS or NT should not be a big deal with this option as you need to do some kind of upgrade to 3.0 grammar checker in future anyway.
    Those are my 2 cents
    HTH
    --Rajesh                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Need idea : Integration of CRM On Demand web services with Oracle SOA 10g

    Hi Al,
    Can anyone have any idea on integration of CRM on Demand Web service with Oracle SOA 10g specially BPEL 10g.
    If you have any idea please share with us. Or if you know any good link on the same... please let me know.....
    Thanks in advance
    Debarshi

    AFAIK there is no such mapping available, however you may want to take a look at this Support Community thread that discusses the migration and even gives some samples.
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • How to create a table which contains relational data and Document data

    hai all
    i need to create a table which contains relational data(i mean coulumns whose data types are type NUMBER,VARCHAR) and documents(like xml file/html file/image)using iFS.
    when i store the document data(xml data/html data) in the iFS ,it will be stored as Document Object.so how do i relate this document object belongs to a particular row in a table.
    do guide me
    thanks

    Please see reply at http://technet.oracle.com:89/ubb/Forum36/HTML/000778.html

  • Table name which contains all the details of infocube

    Hi All,
    I need to write a program which contains the details of infocube like
    1) Request ID
    2) Request Number
    3) Username
    4) Transfered Records
    5) Added Records
    6) Data source
    Please could anyone tell me where i can find all these details.
    I need to know the table name or else any function module name which can fetch all the details based on Infocube. I got one table name 'RSMONICDP' where i can get Request number and username. but rest i m not able to findout..please help me out.
    Regards
    Anju

    Hi,
    Chk these tables
    RSMONICTAB -- transferred and added records
    try also RSREQDONE RSREQICODS and RSMDATASTATE for other details
    Regards,
    B

  • I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

    I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text  or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

    The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
    David

  • I need the dialog box (which contains page selection etC) HOW TO MAKE IT?

    hi
    i have done an requirement in smartforms.
    i need the dialog box (which contains output device name, page selection etc) when i take the print (smartforms).
    And now i already can see a dialog box .but still it doesn't have the page selection.
    I mean if the smartforms which have 5 pages,and what i need is just print the page 1 and page 3 . so I need the page selection
    which can help me on this issue. 
    Would anyone know something about it  and give me some advice . I will be appericate it.

    Hi,
    Just check with the control parameters of the function module, if you have changed any of it.
    If you have changed it then try to give the no-dialog field of the control parameter table as space.
    If the dialog box which gives you the Output device name and others appears then just below the output device name you have the column for the page selection.Just pass the values of the pages separating them with comma(like 2, 5 will print second and fifth pages) and it prints only those pages.
    Regards
    Sarves

  • Need help - How to load data which contains \r\n

    Hi All,
    We have a requirement wherein we need to load the data from a .dat file, with fields separated by | symbol and the line separator specified as '\r\n'
    INFILE '/scratch/xyz/abcd.dat' "STR '\r\n'"
    FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
    Can you please help us load data which contains multiple lines in a single field to a database table field , keeping the line separator in ctl file as '\r\n' itself.
    When we try bringing the '\r\n' within a text field enclosed in "" , the '\r\n' , sqlldr considers it as the end of that record and not as a data which needs to go into a column.
    One option we have is to have the extraction process create the data in such a way that the fields with multiple lines , be brought in the .dat file enclosed in "" as
    "Test
    "|8989|abcd
    where the new line in the first field is just '\n' .
    Is there any other way in which the requirement can be addressed.
    Version: SQL*Loader: Release 11.1.0.7.0
    Thanks,
    Rohin

    In addition, you would need to know the character set encoding of the csv files (e.g. the code page used).
    Basically you need to have the facts about both client (csv file) and database character set.
    As suggested, use the available documentation - it's there to help you!
    http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch2charset.htm

  • Need a "display filter" to find http packet which contains a specific word

    hi friends
    in my test lab, i have deployed a web server.
    in default website folder (wwwroot) i have a text file named myfile.txt within which i have written some words, for example the word "computer".
    i started capturing traffic via Microsoft network monitor
    now via my client's browser, i browse this address   http://myserver/myfile.txt & my text file contents are shown within IE.
    now i need a display filter in Microsoft network monitor which find this packet for me ( i meani need to find the single http packet which contains the word "computer".
    i spent a lot of times but it didn't result.
    any help please?
    thanks in advance

    You can use the ContainsBin plugin and there's an example in the library under Search Frame.  For example the following looks for the word FONT.
    ContainsBin(FrameData, ASCII, "FONT")
    Also, just to let you know, we released Message Analyzer (http://blogs.technet.com/MessageAnalyzer), which also has this capability and a lot of other things that might help, such as regex expressions.
    Paul

  • HT1373 I have lost my harddrive which contains a vast amount of music I've been collecting for many years. I just purchased a new Mac, but I've reached my activation limit. And I only have access to 2 of the 5 activated computers. What will happen to my m

    I have lost my harddrive which contains a vast amount of music I've been collecting for many years. I just purchased a new Mac, but I've reached my activation limit. And I only have access to 2 of the 5 activated computers. My old music can still be played on my iPod, but I need to set up another account on my new Mac. What will happen to my music if I were to deactivate all of activated computers?

    Authorization determines to which computers material requiring authorization can be transferrred using the itunes interface.  If you want to re-download past purchases then a computer need to be authorized.
    As for transferring music from the iPod, your i-device was not designed for unique storage of your media. It is not a backup device and media transfer is designed with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is purchased content.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • Save/Open dialog crashes on opening a folder which contains multiple app. alias

    Hi:
    This is my first post in Apple forum, I've been searching some pages here, obviously I'm not the only one having this (or similar) problem but all existing threads are suggesting "Safe Mode" or "Disk Util" these useless things and never worked for me.
    I believe this is a bug from os x / Finder, not sure if this has been filed or not against Apple bug db.
    The problem:
    Save/Open dialog hangs up when loading / opening an existing folder which contains multiple application alias
    How to reproduce:
    1) Use any browser (I use Firefox and Chrome) to open a page and  print the page / or download something, or print something as PDF
    2) When Save dialog ( some people call it file picker or location selector, whatever) pops up, select a folder which contains multiple application alias
    3) Dialog hangs up, and the application icon on those  alias will not be loaded successfully. Need to Force Quit the browser.
    4) Issue cannot be reproduced always, but frequently enough if you have many application alias and files / subfolders in the target folder
    5) By removing all the application alias, can workaround the issue.
    6) The icons of application on those alias are loaded slowly in a successful loading (seems there are some performance issues)
    7) This issue has not been observed before upgrading to Mavericks
    Env:
    27 inch iMac Late 2012, 2.9GHz i5, 8G DDR3, NVIDIA GTX660M 512M, OS X 10.9.1
    Please anybody (not sure if Apple monitors this community) who knows details in regards to this, share some info. (or maybe there already is a fix ? ) .
    Thanks.
    Regards,
    Lyle.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How to read a line from a file which contains 45000 characters?

    Hi all,
         Iam a receiving a .CSV file which contains n number of rows ,each row has a data seperated with delimiter.
    These values based on delimiter it is seperated and certain validations are handled.
    Iam using UTL_FILE.GET_LINE operator to read the value and store it in a variable which is declared as l_text VARCHAR2(30000).
    when we receive a line which contains huge characters say 45000 then it throws an error(Unable to read the file).
    Only on rare cases we used to receive these kind of files with huge size.
    Kindly help to solve this issues.
    Database details.
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    PL/SQL Release 11.2.0.2.0 - Production
    CORE 11.2.0.2.0 Production
    TNS for Linux: Version 11.2.0.2.0 - Production
    NLSRTL Version 11.2.0.2.0 - Production
    Hereby i have tried with long Raw data type but still same error unable to read the file.pls find the sample code below,
    declare
    l_text             LONG RAW;
    l_importTypeFile   UTL_FILE.FILE_TYPE ;
    begin
         PKG_COMMON.PROC_FOPEN(g_Directory, P_FILENAME,    'RB',l_importTypeFile,    p_error_cd, p_error_msg) ;
    UTL_FILE.GET_RAW(l_ImportTypeFile,l_Text);
    End;
    Thanks in Advance
    Siva

    Hi Siva,
    Are you trying to use data from this .csv file into your realtion tables. If yes and If you are using 11g Oracle database. I would suggest you create External Tables using the below query,
    http://www.oracle.com/technetwork/issue-archive/2011/11-mar/o21nanda-312277.html
    STEP1: You need a Directory where your SCHEMA has read/write access. Store the csv file in that directory.
    STEP2: Create an EXTERNAL Table script. Please refer the above URL. Examples are for coma delimiter (,); replace it with your pipe (|) in the code
    STEP: Once your external table is created you can simply create a relational table as below:
    CREATE  TABLE relation_table
      AS
    SELECT * FROM external_table;
    Regards,
    RaviR

Maybe you are looking for