I need a plain trumpet sound and having trouble

I need a plain/pure sound of a trumpet and I'm having trouble with it sounding off. What should my settings be with all the options. I'd greatly appreciate any help - sorry for such a basic question.

Mavericks often needs new drivers.. did you check the brother website for new drivers for 10.9.
Delete all the previous references to this printer.. and any other printer if they no exist.
Try and load again the new printer according to the Mavericks instructions.. this is actually nothing to do with the TC.. since the printer is network and using wireless or ethernet (not USB!!). Then the TC it is simply another client.
http://support.apple.com/kb/PH14143

Similar Messages

I am physically disabled and having trouble with the sensitivity of the screen on my iPad mini - any suggestions?

I am physically disabled and having trouble selecting apps because of the sensitivity of the screen - any suggestions on what to do?

I would think assistive touch would be exactly what you are looking for. It's engaged using the Accessibility method I described above.
Here's the writeup about assistive touch from the iPad User Guide:
AssistiveTouch AssistiveTouch helps you use iPad if you have difficulty touching the screen or pressing the buttons. You can use a compatible adaptive accessory (such as a joystick) together with AssistiveTouch to control iPad. You can also use AssistiveTouch without an accessory to perform gestures that are difficult for you.
Turn on AssistiveTouch: Go to Settings > General > Accessibility > AssistiveTouch. To set Triple-click Home to turn AssistiveTouch on or off, go to Settings > General > Accessibility > Triple-click Home.
Adjust the tracking speed (with accessory attached): Go to Settings > General > Accessibility > AssistiveTouch > Touch speed.
Show or hide the AssistiveTouch menu: Click the secondary button on your accessory.
Hide the menu button (with accessory attached): Go to Settings > General > Accessibility >
AssistiveTouch > Always Show Menu.
Perform a swipe or drag that uses 2, 3, 4, or 5 fingers: Tap the menu button, tap Gestures, and then tap the number of digits needed for the gesture. When the corresponding circles appear on the screen, flick or drag in the direction required by the gesture. When you finish, tap the menu button.
Perform a pinch gesture: Tap the menu button, tap Favorites, and then tap Pinch. When the pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the pinch circles in or out to perform a pinch gesture. When you finish, tap the menu button.
Create your own gesture: Tap the menu button, tap Favorites, and then tap an empty gesture placeholder. Or, go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture.
Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad: Tap the menu button, then tap Device.
Simulate pressing the Home button: Tap the menu button, then tap Home. Move the menu button: Drag it to any location on the screen.
Exit a menu without performing a gesture: Tap anywhere outside the menu.

Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible? I have the Airport Express now and it works fine.

Just bought a brand new airport extreme and having trouble with it being recognized. My mac is version 10.5.8. What should I do?

The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
From Apple's Specifications:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
A few options.....
Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
Use....or borrow an iPhone or iPad to set up the Extreme

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page. I cannot seem to find any controls to adjust this. Any advice appreciated.

Thanks CtDave, for the further info. Unfortunately, those suggestions are not working, which is strange.
....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF. One simply choses the files, orders them, and creates a PDF. (Resolution doesn't matter; 300 DPI is no problem.) However, my new Photoshop CS5 does not have the option in Automate.
What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF. It worked without a problem, but seems like more work than the old PS method. I will download a newer version of Acrobat to see if that makes any difference.
.....Also, thanks Test Screen Name: I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf). But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
Kind regards,
Prince Nuada

I baught second hand iMac and having trouble to reset to factory setting Help pls

I baught second hand iMac and having trouble to reset to factory setting Help pls

The previous owner left a Recovery HD partition on the drive. You cannot use it because it will only install a version of OS X that is tied to that persons Apple ID. You cannot use his/her Apple ID nor reinstall his/her copy of OS X. You must start, literally, from scratch.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Just bought a new Macbook Air (and a new to Mac) and having trouble connecting to home hub. Hub can be found yet when I enter my password, I receive the message "timed out". Can anyone help me?

Just bought a new Macbook Air (and a new to Mac) and having trouble connecting to home hub. Hub can be found yet when I enter my password, I receive the message "timed out". Can anyone help me?
G

Go into your router's page and disable password protection and try connecting again.

HT2534 I have bought iTunes card of $30.00 and having trouble purchasing a game on iTunes for my iPad

I HAVE BOUGHT ITUNES CARD OF $30.00 AND HAVING TROUBLE OF PURCHASING A GAME ON ITUNES

Some Game Apps require a Credit Card assosciated with your Account because of In-App Purchases.
Check with the Developer.
If this is not the issue...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I have been trying to download or update my firefox browser and having trouble. Is there no one to call????

I am finding this very difficult and can find no help. I want to talk with someone in your support, please.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Updated Z10 to new software release 10.2.0.429 and having trouble with sending BBM/text messages

I recently updated my Blackberry Z10 to the new software release 10.2.0.429 and I'm having trouble sending messages on BBM b/c the red X shows up on every single message that I send to any contact on my list. This was never a problem for me prior to updating it. I also suddenly cannot open my browser nor can I open my texts properly nor send or receive texts. The keyboard on the touchscreen shows up constantly while im trying to navigate through the phone and it stays frozen until I lock/unlock the phone. All of this ONLY started happening ever since I updated it. What's going on? Please help, this shouldn't be happening!!

Hi and Welcome to the Community!
Keep the phone on, and remove the battery for about a minute or more and then replace it
VIA | rat-7
http://supportforums.blackberry.com/t5/BlackBerry-Z10/z10-update-10-2-0-424-problem-with-text-messag...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I just change form pc to mac, and having trouble to retrieve my music from iTunes in mac, how can i fix it??

I recently I change from PC to mac and I am having trouble to retrieve my music from iTunes in mac, it shows in PC, but when I tried in mac I cant not see any of my music. What can I do??

Use Migration assistant
http://support.apple.com/kb/PH4565

Trying to buy a printer under $100.00 for my brother in law and having trouble finding one compatible with his os. He has an older model (as is he)...os x 10.6 tiger. Any suggestions how I can find one? Thx

Trying to buy a printer for my elderly brother in law and having problems with compatibility. He has a Mac...os x 10.6 tiger. Any suggestions?

I have the Cannon pixma mg3120 works fine for me with mac os x 10.4.11. I am able to refill the color ink jet cartridge. Press reset + color copy button for 10 seconds.
http://www.amazon.com/Canon-MG3120-Wireless-All-In-One-5289B019/dp/B005TI2Q8M
Mac OS® X v10.4.11 to v10.6.x
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg3120

New IPod and having trouble

I just bought a new IPod and Windows will not reconize it and I am having trouble installing the software that came with it.
Windows brings up a warning screen about the software is not digitally something or another.
I tried the newest updater and it also can not install and I get the same warning screen.
Anti-virus is turn off also!
My IPod is a fifth generation 30GB.
My windows is xp home with service 2 on it.
Any ideas that can resolve this?
TIA
MA146LL/A Black Windows XP

I am having trouble installing the software that came with it.
Did iTunes install?
Does it run?
I just bought a new IPod and Windows will not reconize it
Can you see the iPod in My Computer?
http://docs.info.apple.com/article.html?artnum=61711
Windows brings up a warning screen about the software is not digitally something or another.
Would you pleaase be specific about the message?

I now have Windows 8 and having trouble opening CS6 Bridge

I have seen some of the suggestions people have posted about having trouble with CS6 Bridge. I've tried them, but they do not seem to work. Suggestions

Details. What happens? Have you ever had CS2 on machine?

Recently upgraded to Windows 7 and having trouble

I've been using Adobe Acrobat 8 Professional for several years on Windows XP. Yesterday, my help desk upgraded me to Windows 7. I needed to reinstall Adobe. I keep getting a message during the installation process "The file "Adobe PDF.dll" on Windows Vista CD-Rom is needed. Type the path where the file is located, and then click OK." I, instead, hit cancel. The installation appears to be complete, but I am unable to convert Word documents or printouts to PDFs. Does someone have any idea as to how to fix this?

Error "The file AdobePDF.dll is needed"
And seriously consider upgrading to Acro XI. This is like having a new Mercedes and driving it with your previous car's tyres....
Mylenium

Adobe flash 11 is slowing pc and having trouble getting on ie9

I had to uninstall it to get back to normal...on the adobe flash forum many others are having the same issue...is anyone else here getting the same trouble?

Hello to all those who are having issues with Adobe readers/ flashplayers on any Internet Explorer versions. Especially after an update or upgraded aversion. After an up grade or update you need to go and enable it again this also aplies to Real Player as well. First thing is to do is check services. Go to All Programs search box type in Services open it. Now go down list and find Adobe Acrobat settings should be: Startup Type manually and Adobe Flash Playe... Startup Type. Real Player is not listed in Services .
Now open up your Internet Explorer right click on tools and then select Internet options then click on Advanced tab top row. Go down list and put a check mark Enable third - part browser extension clock ok. Then right click tools then select Manage add-on. Then select Toolbars and Extension Adobe PDF Link enable it undre status For Real Player enable it also. For early version of Internet Explorer 8 and below Adobe Flash player will be listed as well enable it. For some reason when they are updated or upgraded they will not enable them selves. You must do it manually . Or do a back restore and never update it again. These direction have resolved this issue before in previous forum post. Please click on Kudos if this resolves your issue. Thank you frrw.

I need a plain trumpet sound and having trouble

Similar Messages

Maybe you are looking for