I need a professional help please "audio device problem"

Hi guys ..
I am facing a problem with my audio device ... on my HP DV5-1126em laptop
when I play any sound , the first part of it can't be heard .. for example , when the system start "any sound clip" .. the sound will start from the middle of the voice clip i.e. " the first part of sound is missing" .. but if i repeat the sound it will play without any problem , but after some seconds .. the problem appears again
I tried to update the driver but it didn't fix the problem
BUT when I uninstall IDT high definition driver , this problem become less frequent .. but it still there
I had also recoverd my system , but there is no benifit .
I noticed when I use the head set the problem will deminish completly
please give me your advice , it may help
pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaase help me

Hi,
Download audio driver:
IDT audio here
Disconnect from Internet.
Uninstall from Your system audio drivers.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Restart Your system:
On boot press ' F8 ' and choose ' Safe mode '.
Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers
and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
Restart Your system and this time start it in normally.
Install downloaded audio driver.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

Need a little help please Airport Express

Need a little help please.
I am trying to set up a wireless network at my home using Airport Express.
I have a regular phone line running in to I assume the modem. From there, there is an Ethernet cable running from that box to the back of the PC. My question is, I think, which of those do I unplug and plug into the Airport Express, the one on the back of the PC or the one that is in the back of the modem, or is this totally wrong.
Any help would be appreciated…
Thanks
In advance…
PS I have the manual but to me it is not very clear…

Your connection sequence would look like this:
Internet > Modem > AirPort Express >>>wireless to your computers.
This means that you would unplug the cable that is now connected at the back of your PC and move that connection to the AirPort Express.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue to follow the guided setup. On the third page, you will choose the option to "Create a wireless network" and continue the setup.

HELP No Audio Device Installed on HP dv4-145dx running Windows Vista Home Premium Service Pack 2

I recently completed a Windows update and now my audio device is not functioning at all. I am being told that NO AUDIO OUTPUT DEVICE IS INSTALLED. I have tried to use the Update Driver function and keep receiving the message " WINDOWS FOUND DRIVER SOFTWARE FOR YOUR DEVICE BUT ENCOUNTERED AN ERROR WHILE ATTEMPTING TO INSTALL IT."
If anyone has advice on how to resolve this issue please help. Thank you.
Dannette

Hi,
It seems that the Audio Driver is corrupt:
Please click Start->In the Search Field above, type DEVMGMT.MSC and Press Enter, it opens Device maanger Window, click + next to Sound, Video and Game COntrollers, right click on IDT or High Definition Audio Device entry, and click uninstall.
Click Start->All Programs->REcovery Manager->Select NO on Software Program Installation, click Next, select YEs on Hardware Driver installation, click yes, it shows all Drivers, choose Audio Driver, and click Install.Restart the PC, and check if the issue has fixed. If not, go to Control panel->Sound, on PlayBack Tab, right click on empty Space, select Show Disabled Devices, Show Hidden Devices, select Speakers, and click Set Default, play a file in Media Player, check to see if it works.
Thank You.
Kiran Talluri
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

Help with Audio Device Playback

Hoping someone out there can help. Before I updated to iTunes 7, I played back all of my iTunes music through some studio monitors connected to a Digidesign Mbox audio interface. Since upgrading, I cannot get clean audio using this device. When I select "Digidesign Mbox: Chan 1-2" as the default sound playback device in my QuckTime preferences, playing a song in iTunes gives me a garbled sound--almost sounds like a CD that's skipping. Can anybody help with a solution? I hate having to listen to my tunes through two tiny cheap computer speakers!
Thanks in advance,
Mike

I have the same problem. I get the garbled "Skipping" sound when I use the new version of iTunes. The only way I have to get around it is an old version of iTunes 6 I have saved - it has the same version of Quick Time Attached that was good (then) and should work with the WaveDriver. I have an MBOX 2 and it sounds GREAT.
It really is bad that Apple has this "New, Great" iTunes but it won't work with the existing hardware. I can go from my Sound Card out to my Monitors, but the sound quality is bad. And it is so much easier to just use the MBOX volume adjuster - it is very handy.
Apple, please fix this problem. I want to download DRM free music but iTunes 7.2 does not work with MBOX 2.
AlienWare Area 51 Windows XP 4gb RAM, nVidia 6200TC, SoundBlaster Audigy, MBOX 2

Trying to install windows 7, installation disc won't eject when it needs to. Help please?!?!?!

When setting up bootcamp I install windows 7, it then asks me to eject the installation disc to continue the installation but at this point the disc will NOT eject. Help please?!?!?!
If I cancel the installation it'll eject the disc but it is at this point that I need to in order to continue and it just won't eject. I've tried the eject button, cmd E, starting again but I don't seem to be getting anywhere :s

Sorry I'm a little late, my e-mail notifications died, I was wondering why it was so quiet. Here I thought I was getting better at this.
Have you tried the USB thumb drive W7 installer way? I know 10.7 has an option now for installing a W7 installer iso onto a USB thumb drive but I don't know if 10.6 does. Search Google/yahoo for more information. Basically just make an iso of the W7 installer and copy it to the USB drive and it will boot via USB.
At least I think yours can? Not sure which models work.
Have you tried one of those CD disk cleaners? I bought one years ago and worked like a charm. (if it's dirty) It has a row of real fine bristles.
Other then that you may have a dying drive?
As far as games, make sure they are updated to run W7, other then that, that's Windows for ya.....

Aggregated audio device problems

Hi, I wonder if there is anyone who can help me?
I would like to combine two firewire audio devices (a MOTU 896hd and MOTU 896) to enable me to use 16 audio inputs into LOGIC 7 (7.1.1) Mac OSX v 10.4.10
I have tried aggregating devices in the Audio and MIDI setup with no success at all!! I followed the instructions that I had been given to use the aggregate device tab within the LOGIC AUDIO INTERFACE page (within logic) but all to no avail
I have organised the setup as follows
1. The 896HD is the first in line.
2. I have daisy chained the second interface from the 896HD to the 896 via a firewire cable.
3. I have clocked the devices via word clock
4. Both interface work on their own but not as an aggregated device.
Is there anything obvious that i'm doing wrong?
I would be very grateful for any help at all.
Best wishes
Paul Hornsby
(Wales)

I had been using a headphone and when I wanted to go back to my computer audio it won't come on and the message I get say that "No auto ouput device is installed" I have tried many things but nothing has worked.

MSI Mega 180 Deluxe: "No Audio Device" problem

MSI PC 180
AMD Athlon XP 2600
2 x 256 Mb DDR 333 Kingston
MSI TV Card
1 HD Maxtor
1 LG DVDRW
Windows XP SP2
Norton Antivirus 2004
The computer workest fine until today: now there is no sound.
The device manager show
- NVIDIA NForce Audio Codec Interface
- NVIDIA Nforce MCP Audio Processing Unit
Correctly without yellow o red marks
However in Control Panel , Audio Devices appear: "No Audio Device"
When click in Nvidia Mixer say that there are no audio device
I upgrade to the latest Nvidia unified drivers with the same result
What happen? How i can have sound again?
Regards,

Thank to everybody for the answers
I have reset the clock and the problem continue
I have uninstall the newest drivers (downloaded from nvidia web) using Add/remove programs, and reinstall using original CD from MSI, and the problem continue
The problem is not temperature. The sound is disabled after hours of computer is off.
I unplug the power and the problem continue
Now i have the following audio drivers:
- Nvidia Audio Codec 6.14.348.2
- Nvidia MCP Audio Processing 6.14.348.2
The problem is: The Windows XP detect the integrated NVIDIA sound card and install the drivers but in Control Panel show: No AUDIO DEVICE. And the sound is off...
My conclusion is MSI PC 180 is very weak: the integrated components are very unstable.
I'm computer assembler and i discontinue to sell this MSI equipment.
I'm very annoyed with MSI quality.

Help Please, Audio Problems

Hello, I have a satelite A205-S5804 Toshiba laptop.
My audio has stopped working for reasons unclear to me.
After already successfuly executing a system restore my sound has not returned to my laptop.
Can anyone please provide any assistance concerning this matter. Thanks.

Reinstalling Sound on computer.
Start Search >type in device manager
Device Manager > Sound, video and game controllers > right click on the item below that category and Uninstall then just push OK.
Restart your computer and the driver will be installed automatically.
Hope this will help.
oOo
*Read EULA before installing any software.
√

I really need emergency iphone help- please- it has gone into restoration mode and wont come out unless i click restore- if i do will i loose all my photos and videos etc? please help!!!

i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
what should i do anny coments or ideas please let me know!

The first step in the upgrade process is a backup.
Did iTunes not create a new backup when you first connected it?
You really should be syncing your device and copying pictures off of it on a regular basis.
Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
At this point, you only option is to restore.
Also, in the future, ensure your laptop is plugged into external power before starting upgrades.

In need of advice&help PLEASE.

I'm not sure how long this is going to be, so please bear with me.
[I apologize if this question has been asked already].
I'm having major problems with my first gen. ipod nano.
I've had it since March 2006 [roughly], and it started failing me around Oct-Nov of 07. I had completely drained it and then left it uncharged for about a month-ish or so. I finally decided to charge it and when I did, I noticed that the Apple logo kept flashing and wouldn't stop, even when I unplugged it from my computer. After many failed attempts, I decided to do a restore, so everything on it erased.
Now, before I proceed [I don't know if this is going to be helpful or not...but just in case]:
I have a Windows XP, and an old USB port. The like...1.0 or 1.1? version.
Something along those lines. I haven't got anywhere on this computer a USB 2.0 port. When I restored my ipod I also downloaded the latest version of iTunes-- before, I had been running on a really old version, one from 2006. After I restored my iPod, I didn't see anywhere a pop-up or whatever asking me to rename my iPod. So now, when I try plugging in my iPod, my computer recognizes that I've plugged something in, and so does my iTunes, and it opens. However, my songs won't bloody sync! Is it because my iPod doesn't have an "owner" so to speak? Or is it because I have a new ITunes version but an old USB port? Could it be a combination of the 3? Mind you, I think I may have the ITunes 7.5 version or something. Today I tried my iPod again and it asked me if I wanted to download the 7.6 version. Just to give you a hint of what iTunes version I have.
I'm sorry if I come across a bit rude or impatient; this whole iPod thing has been driving me crazy. Pardon the length of the post as well.
One more question though: if nothing works, can I take my iPod to an Apple technician or...do I just need to get a new one?
I realllly hope someone can help me with all this! Thank you =)
...Oh! One more thing. How do I rename my iPod? I don't have a clue as to what to click.

*How do I rename my iPod? I don't have a clue as to what to click*
Connect your iPod to your computer
When (or if, considering the problems you are having) it appears in the iTunes source list click on it's name once to highlight it
Click on it's its name again.
The text box will open for editing.
Type a new name.
Have a look here for more: How To Rename your iPod

Photoshop Elements 7: Newbie Needs Drop Shadow Help, Please

Hello.
I'm brand new to Adobe Photoshop Elements 7 and need help with the Drop Shadow feature, please.
I've read the documentation, but it's not crystal clear to me, so maybe someone can guide me through it.
I want to create text on a blank white canvas, and add a little bit of drop shadow to it. That's all I want to do--plain and simple.
I can create the text, but I can't for the life of me find any drop shadow options.
The documentation I'm using is the on-line, web-based help. I type in Drop Shadow in Search, and select Add Text to a Slide.
The third step says, "In the Properties palette, set any of the following options" and then offers some options, including Drop Shadow and Drop Shadow Color.
I'll be darned if I can locate the Properties palette. Obviously, I'm not well-versed with Photoshop, so if anyone can just steer me towards this feature, I'll take things from there.
I know this is probably rock-bottom basic, but I'm stumped. Thank you!
J. Danniel

I need a lot more help with this than I thought.
The problem I'm having is this: After creating the drop shadow effect, when I try to save the image as a transparent GIF, it quite simply.... looks horrible.
Here is what I'm doing in detail:
1. New/Blank File.
2. Blank File is set to transparent. (Is this the right way to make a transparent GIF?)
3. Creating text.
4. Cropping text.
5. Selecting drop shadow effect.
Now, here's where I get confused. Do I just select File/Save As, or File/Save For Web?
When I just use File/Save As, and select the GIF format, the drop shadow effect in the final file looks horrible when I embed the image into a web page. The text looks good, and the file is transparent, but the effect is ugly.
When I try to use Save for Web, there is a Before/After screen. The Before side looks decent; the After screen looks horrible, too.
So, now I don't know what to do. Can you or anyone guide me through this a bit further, please? Thank you! Jd

Beachball - need to shutdown - help please

Help. It's happened again and I'm embarassed to admit that I only have just over 10% free drive space.
I was running VPC and inserted a USB diskette drive and now I've had a beach ball revolving for over an hour. I'd like to safely shut-down. The system clock has stopped.
I have entered expose mode and can see several Safari windows, 2 Mail Windows, a Windows Excel window (running when I inserted the USB) and a VPC window. I can select any Mac application just by clicking the window and it shows me the control bar at the top of screen. However, I cannot get a cursor to access the controls.
Pressing command - option - escape will not close any applications.
I'm not sure what this will do to my open VPC image if I press the off switch.
Any suggestions please?

I've re-opened this thread, as the topic is similar.
I cannot believe how instable my system is. I switched to Mac to get a reliable system, but I cannot do without Windows entirely, hence my heavy use of VPC.
Today I got the small grey screen "You need to restart your computer". I was running VPC at the time. All apps were closed except Windows Explorer (the file system). The cause was merely unplugging my broadband connection. Wow!
On rebooting VPC I got:
"One of the specified disk images could not be opened. The disk image file is not the correct file type or uses a file format that is unsupported by this version of Virtual PC."
I "detached" my "drives" 2+3, which were pointing to my Drive2.vhdp and Drive3.vhdp data "drives" and tried again. No luck.
Drive 1 was pointing to Disk1.vhdp, which is a part of my Windows 2000.vpc package. I don't believe that it was pointing there before the crash.
# side note #
(The Windows 2000.vpc package is an old installation that I don't use but have not deleted. I currently use one called: "Windows 2000 copy 1-011105") which might or might not be a copy of "Windows 2000.vpc." I've had so many problems, it's hard to say.
I then tried and successfully detached the Disk1.vhdp and received a warning:
The hard drive data previously used by Drive 1 is no longer contained in this PC document. The data has been moved to a separate Virtual Hard Drive Document "Windows 2000 copy 1-011105 Disk1.vhdp".
On examining the above package I find:
BaseDrive.vhd 14.45GB (size about right) dated last night when I last closed VPC
MainPackageFile Alias
UndoDrive1.vud dated at the time of the problems.
On examining my "Windows 2000 copy 1-011105.vpc7 I find:
Configuration.plist
IconCache
MainPackageFile Alias
StartMenu.plist
Do you have a suggestion as to how I can rescue my above mentioned BaseDrive.vhd please? This is more recent than my last back-up.
Many thanks in advance.

NEED HELP PLEASE! itunes problem.

Okay so I am trying to download itunes 10.6.3 but when I do nothing happens. It stays at itunes 10.6.1. Now i looked over the requirements for the 10.6.3 and it says i need 200 MB and when i go to download it, it only says i have 119. Now I deleted a bunch of stuff but nothing happened still. I looked all over and found no help at all so I'm turning to this. May someone please help me!

Try another computer and see if it recognizes it.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Need HELP please i got problems with my HP recovery

Please help i can't do anything on my Hp ProBook 4520s dont know how too recovery it i use bios HDD Self Test and it stop on Test2 on 10% and it dont do anything. I don't have any CD. I'm not good at this but what is the boot device or how can i do it PLEASE help ME.

No one can help me i can't belive it

NEED HELP WITH AUDIO CAPTURE PROBLEM

I've been filming for the past 2 weeks on a MiniDV camcorder. Heres the problem, I didn't check the audio bit rate before I started filming. Instead of the normal 16 bit, I used 12 bit. Now when I try to Capture the footage, the audio is out of sync and final cut says something along the lines of "The sample bit rate is different than the source. Change the settings to match the source."
I tried to go into the settings menu and change the bit rate to 12 bit, however I was not successful. Can someone please help me with this situation? Thanks for looking. Hope we can figure out a solution.
-D.

Thanks for replying Les. I tinkered with some stuff and it is still not working. I thought I was able to change the "Capture Preset" to 32kHz, instead I was only able to change the "Sequence Preset". The Capture Preset is still set at 48kHz and I have no idea how to change it. Hope you might know what to do. Thanks again for the help.
-D.

I need a professional help please "audio device problem"

Similar Messages

Maybe you are looking for