I need a qualifying copy of iWeb

help me  please send me a qualifying copy of iWeb

Firstly, this is a user forum, so we are all users and nobody else.
If you want iWeb then you will have to purchase a copy of either iLife 11 or iLife 09 from Amazon.  Both of the iLife boxed sets contain the latest version of iWeb which is 09.
Apple no longer supports iWeb and they don't sell it, so look on Amazon or Ebay or whever else.

Similar Messages

  • "You cannot install iWeb Update on this volume. A qualifying copy of iWeb was not found in /Applications" How do I fix this?

    "You cannot install iWeb Update on this volume. A qualifying copy of iWeb was not found in /Applications." How do I fix this?

    Version 2.0.4 is iWeb 08 and direct publishing via ftp is not available in iWeb 08 and never has been.  You have the option of publishing to MobileMe, but you can publish via ftp, but you need to select the option publish to a local folder instead and then upload using Cyberduck, which is a free and dedicated ftp client. 
    If you want the inbuilt ftp function, then you will need to upgrade your iLife package to either iLife 09 which contains iWeb 09 or iLife 11, which also contains iWeb 09.  For this, you need to purchase both of these packages.  Either go to Amazon and try and get a copy of iLife 09 more cheaply or purchase iLife 11 directly from the Apple store.
    This is what you will need to do and iWeb 08, which is the version you have, never has had built in ftp so that option will never be available to you unless you upgrade which you will have to pay for.  Upgraded and updates are different things.  Updates are just your normal run of the mill software updates and address bug fixes etc., whereas you will need to pay for full upgrades to other packages such as from iLife 08 to iLife 09 or 11.

  • How do I get old copy of iWeb?

    So I bought the new mac book air (2 of em) and sold both of the old laptops that both contained Iweb.
    I had no idea that Apple killed the program.
    If I buy an old version of Ilife 09 will I be able to just install Iweb on its own?
    Is it possble I could pull his off of my time machine backup from one of the old computers? Does time machine write over old backups immediately? If not is it possible to access the old copies?
    Thanks in advance.

    Yes, the iLife 11 boxed set does mention iWeb and iDVD, but it is not as visible as iPhoto, iMovie and GarageBand as these were all updated as part of iLife 11, but iWeb and iDVD were not.
    They will not have removed anything from the boxed set and it should be the same as when it first came out. 
    If you want a copy of iWeb 09, which is the most up to date, go and search the Amazon website where you will be able to get a boxed set of iLife 09.
    Also, for a boxed set of iLife 11 you will need to go to the main Apple store online and NOT the Mac App Store. iWeb and iDVD are not available for purcahse on the Mac App Store.

  • Need help retrieving 'backed-up' iWeb files

    In anticipation of iweb going away, I backed up my iweb files to an external drive.  Now, having purchased a brand new imac desktop computer, it did not come with iweb software. So, how do i "restore" any of my iweb files to the new imac desktop so that I can then view them, enjoy them, or upload them to a new server?

    Attach your hard drive to your new Mac and then copy the files over or just drop and drag.  If you have saved your published iWeb files, then you can open them in any browser that you have by opening the file and then clicking on any of the html pages - just double click and Safari or your chosen browser will open them.
    To upload to your server, then you'll need to download an ftp client like Cyberduck or Yummy ftp and upload to your server using this.
    Other than this and if you want to make any alterations to your files, then you needed to back up your domain.sites files from your old Mac that you should have transferrred to your new Mac.  These domain.sites files can be found under your User/Library/Application Support/iWeb/domain.sites.  You'll also need a copy of iWeb on your new Mac - you can do this by using the installation discs from your old Mac and placing it on your new mac or if you still want iWeb go to Amazon and search for a copy of the iLife 11 boxed set and iWeb is included in this.

  • Running a PC via my Mac. Would I need a second copy of Word?

    Hello!
    So I am needing to get Windows running on my Mac for a specific PC only App called Nvivo.
    I am looking into the Fusion vs Parallel issue which both have their advantages and disadvantages. However, I need to know if I need a second copy of Word (ie a PC version) to read the information from my Mac word files then to be read by Nvivo on the PC side (for the cross-platform pollination to work)?
    Does Parallels of Fusion have a feature that makes it so only one copy of word is required? (Sounds like wishful thinking I know!)
    Any help would be appreciated.
    Thanks!

    Hi,
    all Word versions are Operating System - dependent.
    An OSX Word won't work when running WIndows and vice versa.
    But maybe the free OpenOffice will suffice for your needs in Windows.
    Regards
    Stefan

  • HT3910 am in tanzania. and am in need of a copy of CDdrive for a macbook pro. how can i get a copy, please any one to help

    am in tanzania.
    Am in need of a copy of DVDdrive for a macbook pro OS. how can i get a copy, please any one to help

    If you are referring to the original system reinstall discs that shipped with every Mac before Lion came out you'll need to contact Apple with the serial # of your Mac and order a replacement set of them.
    Or look on one of the Auction websites or places like iFixit.com for a replacement set.
    If your Mac came new with any of the Download Only versions of OS X, Lion, Mt Lion or Mavericks you don't need any discs to reinstall OS X. You use the Online Internet Recovery system or the built in Recovery HD partition inb the internal hard drive.
    For the built in Recovery HD hold down the Command + r keys at startup. For the Online system hold down the Command + Option/Alt + r keys and keep them held down until you see a globe on the screen.

  • HT1338 How can I get a copy of iWeb or a web building software like Iweb

    How can I get a copy of iWeb or a web building software like Iweb

    You can look on eBay, amazon.com, or Google search for the iLife boxed set that contains iWeb. If you just want any web building tool you can take a look at Sandvox 2.5.6, RapidWeaver 5.2.2, Freeway Pro, Coda, Freeway Express, or KompoZer as a starting set.

  • Which EM files need to be copied ?

    Hi,
    In order to start the dbconsole on another server to access the same database, I copied the folowing files:
    $ORACLE_HOME/<hostname>_<ORACLE_SID>
    $ORACLE_HOME/oc4j/j2ee/OC4J_DBConsole_<hostname>_<ORACLE_SID>
    $ORACLE_HOME/install/portlist.ini
    So far, it works...
    Do you know any other files that I should copy as well ?
    Thanks
    JD
    Why am I doing this ?
    - I'm on a SUN Cluster passive/active 2-servers system
    - server1 accesses database D while server2 is not used (the oracle instance and EM console run on this server)
    - if server1 dies, then server2 starts Oracle instance for database D and become the active node
    - The EM repository was created in server1 (and SYSMAN was created in the database)
    - the repository does not exist in server2 (the files mentioned above)
    - I can't create the repository when I'm on server2 because SYSMAN already exists in the database
    - Therefore, when the cluster switch from server1 to server2, I just copy these files so that "emctl start dbconsole" work on server2...
    - I do exactly the same when I switch back to server1
    - I can't create an OMS server, we're not using RAC nor DataGuard....

    All you need is the copy of the folder with your machinename_sid over the next folder. The files in the $ORACLE_HOME/sysman/config are the generic files. You need the files and folder that contains the information of the configured EM on server 1. So copy that to server 2 and issue , emctl start/stop/status dbconsole.
    That said, you mentioned that Symans already exists over the server 2,this means that there is already some repository available.What is it for ?
    Aman....

  • Need a current copy of Adobe Flash Player

    I installed a current copy of Adobe Flash Player but I'm still getting the message I need a current copy, WHY?

    http://forums.adobe.com/thread/885448  <---Make sure it's fully enabled
    http://forums.adobe.com/thread/867968 <---Make sure Filtering isn't blocking it

  • We need how to copy macro logic in the system

    Hi Experts,
    we need how to copy macro logic in the system, we have some macros in my friend system,  i need how to copy macro logic , can u send me elaborate.
    Regards,
    BABU

    I'm a bit uncomfortable with you've wanted to do especially you and your friend has a different system (unless its a sister company/industry). If this would be the case you can copy your friend's macro with the help of your basis team to transport them in one system to another.
    if the case is different organization, I'm not sure if that is possible since no industry have same requirements but i may suggest the links below for your reference on how to copy the Macro into external system. Hope the document is relevant to your issue.
    [http://help.sap.com/saphelp_scm41/helpdata/en/82/2101fac5288f4d8c7be7c20e604a8f/frameset.htm]
    Cheers!

  • Error "a qualifying copy of logic or mainstage was not found"

    Hi,
    I write from Chile, South America. I hope someone of you can help me.
    I have problems to install Logic Pro X, When I was installing the program (after downloading the basic content) battery I just MAC and this is shutting down (did not have the charger).
    Then when I went back to try to install the progress bar always stays in "installing"
    Manually downloaded the "ProAudioCoreContent 10, but when I try to install it tells me" a qualifying copy of logic or mainstage was not found "
    Someone of you know that you can do in this case?
    I hope someone can help me.
    Eduardo

    Hi Data Stream Studio
    I try, try deleting any file outside logic pro X, but when trying to install again, the progress bar stays in "installing" and the processor running full.
    As that is processing information, delete information that maybe I do not know where it is on the Mac.

  • Error: Helo command rejected: need fully-qualified hostname

    Im trying to setup a SL Server as mail server for internal and external use (company.lan and company.net).
    When I try to send to the internal (company.lan) I get the following error:
    Helo command rejected: need fully-qualified hostname.
    Here is my postconf -n output
    I guess the error is in the line with the bold letters. How can I change it and should I?
    Thanks
    Kostas
    Last login: Mon Nov 16 23:42:18 on console
    server:~ admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debugpeerlevel = 2
    enableserveroptions = yes
    header_checks = pcre:/etc/postfix/customheaderchecks
    html_directory = /usr/share/doc/postfix/html
    inet_interfaces = all
    mail_owner = _postfix
    mailboxsizelimit = 0
    mailbox_transport = dovecot
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    messagesizelimit = 10485760
    mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
    mydomain = COMPANY.lan
    mydomain_fallback = localhost
    myhostname = server.COMPANY.lan
    mynetworks = 127.0.0.0/8,192.168.16.0
    newaliases_path = /usr/bin/newaliases
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtpdclientrestrictions = permit_mynetworks permitsaslauthenticated permit
    smtpdenforcetls = no
    smtpdhelorequired = yes
    *smtpdhelorestrictions = rejectinvalid_helohostname rejectnon_fqdn_helohostname*
    smtpdpw_server_securityoptions = cram-md5
    smtpdrecipientrestrictions = permitsaslauthenticated permit_mynetworks rejectunauthdestination checkpolicyservice unix:private/policy permit
    smtpdsasl_authenable = yes
    smtpdtlsCAfile = /etc/certificates/server.COMPANY.lan.57680B96FCEC7F50F59A01D8F7DC4E841B2DB453.c hain.pem
    smtpdtls_certfile = /etc/certificates/server.COMPANY.lan.57680B96FCEC7F50F59A01D8F7DC4E841B2DB453.c ert.pem
    smtpdtls_excludeciphers = SSLv2, aNULL, ADH, eNULL
    smtpdtls_keyfile = /etc/certificates/server.COMPANY.lan.57680B96FCEC7F50F59A01D8F7DC4E841B2DB453.k ey.pem
    smtpduse_pwserver = yes
    smtpdusetls = yes
    unknownlocal_recipient_rejectcode = 550
    virtualaliasdomains = $virtualaliasmaps hash:/etc/postfix/virtual_domains
    virtualaliasmaps = hash:/etc/postfix/virtual_users
    server:~ admin$

    Παρακαλώ (you are welcome) Kostas,
    If mail is for internal use only, you can keep the .lan address as long as you authenticate to send.
    If you need to send to external addresses, then make sure you use a valid e-mail address or your mails will be rejected by other mail servers.
    HTH,
    Alex

  • Upgrade: what do I need to qualify?

    I bought Logic Express a few years ago for a G4 Mac Mini. I then went PC and used FL Studio. I have a new Mini now and want Express on it. What do I need to qualify for the upgrade? The serial number? If I connect the old mac will I find the serial number in the Logic Express > Help > About dialog?
    Thanks,
    Amy

    I actually found my install discs, but still no serial number. Are the discs enough for the upgrade? Do I have to install version 7 first? Can I find my serial number in the installed version on my old Mac?

  • Do I really need to Shadow Copy Backup Drive?

    I am running SBS 2011 Standard. Every once in a while I get "volsnap event id 25 (The shadow copies of volume \\?\Volume{4bac8e93-04ed-11e2-814f-90b11c020377} were deleted because the shadow copy storage could not grow
    in time.  Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied.)".
    The referenced volume is actually my backup drive which is a "simple, basic, NTFS primary partition" without an assigned drive letter which is entirely devoted to Windows backup destination drive.
    VSSADMIN LIST SHADOWSTORAGE shows:
    Shadow Copy Storage association
       For volume: (\\?\Volume{4bac8e93-04ed-11e2-814f-90b11c020377}\)\\?\Volume{4ba
    c8e93-04ed-11e2-814f-90b11c020377}\
       Shadow Copy Storage volume: (\\?\Volume{4bac8e93-04ed-11e2-814f-90b11c020377}
    \)\\?\Volume{4bac8e93-04ed-11e2-814f-90b11c020377}\
       Used Shadow Copy Storage space: 2.094 MB (0%)
       Allocated Shadow Copy Storage space: 2.93 GB (1%)
       Maximum Shadow Copy Storage space: UNBOUNDED (100%)
    which I assume means VSS is actually keeping a shadow copy of the backup drive (or trying to).
    My question is - do I really need to shadow copy this volume? If not would I stop this by the following command?
    VSSADMIN DELETE SHADOWSTORAGE /FOR={4bac8e93-04ed-11e2-814f-90b11c020377}

    Just did a quick bit of research on this and I think the error may be misleading.
    If you go into Disk Management, right click Disk Management, All Tasks - Configure Shadow Copies
    Do they show as Disabled on that volumeID?
    If I go into Windows Server Backup and check out the Details, I see (on this system) 70.63gb of Backup Items, and 186gb of Copies. Which tallies up with what I see under List ShadowStorage.
    So, what I suspect is happening (although happy to be proved wrong) is that the error above is VSC making space on your backup disk, or some other management process of the backups themselves.
    I expect if you delete that Shadow Storage you will in fact, be deleting the backups.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Helo command rejected: need fully-qualified hostname

    Hi,
    I am using iPlanet messaging server 5.2. My email is rejected by some mail servers with following reason:
    Helo command rejected: need fully-qualified hostname
    Could you please give me some sujjestions to fix this problem?
    Thanks in advance!
    Francis

    Without knowing what os you're on, I'll assume solaris . .
    You can address your helo/ehlo greeting two ways:
    1. Fix your /etc/hosts so that the fqdn comes before your nickname
    xx.xx.xx.xx hostname.domain hostname
    or
    2. Add the fqdn to the daemon line in the imta.cnf file:
    ! tcp_local
    tcp_local smtp mx single_sys remotehost inner \ switchchannel identnonelimited subdirs 20\
    maxjobs 20 pool SMTP_POOL maytlsserver\ maysaslserver saslswitchchannel tcp_auth\
    threaddepth 64 dequeue_removeroute
    tcp-daemon HOSTNAME.YOUR_DOMAIN

Maybe you are looking for