I need a quick response

HI, i have to recomand some solution for.
they have two databases all is running fine but there is one table which they want to sync every week.
so whats your suggestion in this regards.
what i have recomands is incrmental export import but that is now obsolete for specific owner or table but yes you can do for whole database. i am getting this error while doing.
EXP-00041: INCTYPE parameter is obsolete
EXP-00021: can only perform incremental export in Full Database mode
EXP-00000: Export terminated unsuccessfully
so now any other suggestion???

My version is 10 rel 2
Cant use archive because no network connectivity and if you are suggesting me for logical standby than its not appropriate.
I will use some channel to move dmp or what ever suggested files.
-- are there updates or not ?
Yes there are updates and insert and delete.
--What are these others users (did they work on them own schema ? did they work and declare on the primary?) ?
ok let me explain you
I have 2 sites(a site and b site) and one centralized. A and B site have there own schema and their user work on it like theor is one table trades, in both A and B sites which have different data.
And I have no issues if the site are sync or not . we are ok with that.
Now every week for reporting or monitering purpose I need that trade tables from both sites in centralized database . that centralized database is for his own purpose and nothing to do with other sites except one trade table.
one more that centralized site is not linked wwith A and B sites because these sites different orginazations.
Message was edited by:
Umair Malik ([email protected])

Similar Messages

Modeling Question... need a quick response.

Hi All,
I have developed a dash board recport to count the no of orders with in a work center. there are many metrics. Here is how it is being done.
1. load data source to Ware House layer.
2. Warehouse layer to Appl layer, where I count the operations. (an order could have many operations)
3. Appl layer to Appl layer 2 - where I count Orders - and all key figures are set to overwrite. So between two loads I will retain only the latest count for the same keys.
4. Appl layer to Cube where I count the same orders again, just to make sure it is all 1 if conditions satisfy.
All looks good when the first load goes to the cube. Now wehn the delta comes in some of the orders come again and they get counted again and I see 2 records in the cube added on two different dates.
now if I remove my time dimension I wil have the counts become added together for same orders ( count > 1)
How can I avaoid this doubling in this model or any changes where the count should be counted once or show the real count on my dash board.
thank you.
Alex.

Thank Nareen.
Yeah the behavious of the cube will hurt the process when i do Delta. If that is changed to Delta with delete overlapping I can get this done. I am thinking about the volume in the future would substantially delay the SLA.
Also master data will not solve this problem since I need trend and history of process on each order. Unless I change that to time-dependent and again that will add more issues.
Thanks for your reply.

Hoping for a quick response : EXP and Archived REDO log files

I apologize in advance if this question has been asked and answered 100 times. I admit I didn't search, I don't have time. I'm leaving on vacation tomorrow, and I need to know if I'm correct about something to do with backup / restore.
we have 10g R2 running a single instance on a single server. The application vendor has "embedded" oracle with their application. The vendor's backup is a batch file using EXP - thus:
exp system/xpwdxx@db full=y file=D:\Orant\admin\db\EXP\db_full.dmp log=D:\Orant\admin\db\EXP\db_full.txt direct=y compress=y
This command is executed nightly at midnight. The files are then backed up by our nightly backup to offsite storage media.
Te database is running in autoarchive mode. The problem is, the archived redo files filled the drive they were being stored on, and it is the drive the database is on. I used OS commands to move 136G of archived redo logs onto other storage media to free the drive.
My question: Since the EXP runs at midnight, when there is likely NO activity, do I need to run in AutoArchive Mode? From what I have read, you cannot even apply archived redo log files to this type of backup strategy (IMP) Is that true? We are ok losing changes since our last EXP. I have read a lot of stuff about restoring consistent vs. inconsistent, and just need to know: If my disk fails, and I have to start with a clean install of Oracle and nothing else, can I IMP this EXP and get back up and running as of the last EXP? Or do I need the autoarchived redo log files back to July 2009 (136G of them).
Hoping for a quick response
Best Regards, and thanks in advance
Bruce Davis

Bruce Davis wrote:
Amardeep Sidhu
Thank you for your quick reply. I am reading in the other responses that since I am using EXP without consistent=y, I might not even have a backup. The application vendor said that with this dmp file they can restore us to the most recent backup. I don't really care for this strategy as it is untested. I asked them to verify that they could restore us and they said they tested the dmp file and it was OK.
Thank you for taking the time to reply.
Best Regards
BruceThe dump file is probably ok in the sense it is not corrupted and can be used in an imp operation. That doesn't mean the data in it is transactionally consistent. And to use it at all, you have to have a database up and running. If the database is physically corrupted, you'll have to rebuild a new database from scratch before you can even think about using your dmp file.
Vendors never understand databases. I once had a vendor tell me that Oracle's performance would be intolerable if there were more than 5 concurrent connections. Well, maybe in HIS product ..... Discussions terminated quickly after he made that statement.

Hi, I am oracle apps HRMS Technical consultant.I wanted to know ,can we implement Digital Signatures in Oracle apps 11i XML Reports.if yes what is the approach to do so ? Your quick response is appreciated. Regards , Aasma Sayyad.

Hi,
I am Oracle Apps HRMS Technical Consultant.
I wanted to know,if we can implement Digital Signatures in XML Reports for Oracle Apps HRMS 11i Aplication.
If yes,what is the approach to do so.
Your quick response is appreciated.
Regards,
Aasma Sayyad.

Hi Aasma,
The standard BI Publisher is part of EBS applications.
Most of the EBS reports(R12) are based on BI Publisher.
If you check the responsibility 'XML Publisher Administrator' you will see all the templates used in the application.
Your technical team should already know this.
On the other hand OBIEE would need separate licences.
But for you BI Publisher would do.
Cheers,
Vignesh

Please, need a quick respon

I have just purchased a Zen Micro Photo. I was told by an employee at the store that the install cd is not needed for anything and that you can just "plug & play" the player with WMP0. But inside the Creative booklet there is a warning not to connect the player w/o installing the cd. Which is true? Will I hurt the player if I do not use the install cd? A quick response would be appreciated. Thanks all!

coolguy2420 wrote:I have just purchased a Zen Micro Photo. I was told by an employee at the store that the install cd is not needed for anything and that you can just "plug & play" the player with WMP0. But inside the Creative booklet there is a warning not to connect the player w/o installing the cd. Which is true? Will I hurt the player if I do not use the install cd? A quick response would be appreciated. Thanks all!
The guy from the store is pretty much correct. The ZMP comes with the PlayForSure/MTP firmware, and the drivers are provided by Windows Media Player 0, and you can use WMP0 or Windows Explorer to copy files to and from the player.
You can though install Creative's software if you want, which is on the CD obviously. Worth checking for updates also at the download page.

Warranty for MSI GTX570 - need help quickly please!

Hi. I have MSI GTX570 OC. I just bought Accelero Xtereme Plus cooler, and I plan to remove reference cooler and put this aftermarket one. But I heard that removing the cooler would void my warranty. I hope that is not right. So I need quick response on that question, because I want to put it on my card ASAP.
So, dear MSI users, or administrators, please tell me if my warranty would still be valid if I change the cooler - but of course without damaging the card in any way

Quote from: fi011 on 31-October-11, 02:47:05
haha komsija
How do you mean very careful? Of course I wont damage the card, If that is what you mean, I will do it gently, but whatever I do, Im pretty sure that there would be marks on screws from screwdriver. And Im worried that it could be their proof that the card is opened...
Yes, this i mean
Quote
but whatever I do, Im pretty sure that there would be marks on screws from screwdriver. And Im worried that it could be their proof that the card is opened...
Nope, from screwdriver you have to push it really hard to make sings over the screws.
If you're gentle they are unscrewed very easy.
Quote
And Im worried that it could be their proof that the card is opened...
The card itself has 2 elements, entire cooling system and graphic card pcb itself.
The warantee sticker is over the msi's coolling system, if you try to dissassmeble msi's cooler this will void warantee.
Also even if they know that cooler has been removed, for reapply TIM for example,
they still can accept it if there is no physical damages over it.
However, at the end its down to msi or reseller itself, will they accept your card or not.
But if warantee sticker is instact and there is no any physical damages over the card,
normally they will accept it

I just upgraded to the latest version of iTunes and it duplicated virtually every track in my music library. I need a quick way to delete the duplicates. Sorting by "Date Added" will not help because they are all listed as added on 12/12/2011.

Library Duplicated
I just updated to the latest version of iTunes and it duplicated virtually every track in my library. I need a quick way to delete the duplicates. Sorting by "Date Added" will not work, because every track is listed as added on 12/12/2011 even though this happened today 12/19/2011.

I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
tt2

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Imessage won't send, nor receive! Need help quick

I contacted apple and they told me to call sprint and have the re store the settings or something along those lines. I've tried everything from hard resetting to turning wifi on and off. I need help quick nothing is working and I need to stay in touch! Thank you

travis142 wrote:
Yeah, Sprint was not available. I would like imessage to be working by the end of the night.
Try turning iMessage off, and then turn it back on again...
Troubleshooting Messages
http://support.apple.com/kb/TS2755
troubleshoot iMessage activation

Need a quick answer should I get just wi-fi or wi-fi cellular thanks

Need a quick answer should I get wi-fi or wi-fi w/ cellular what do you think is the best way to go. Will be shopping for one in the next few days. Thanks

It depends upon where you will be using it - do you need to be able to access the internet when you are away from wifi networks, and/or do you need built-in GPS (only the cellular iPads have a built-in GPS chip) ? If you get the cellular version then you don't need to activate a service on it until if/when you need it

Does the Canada ONLINE Apple store sell the unlocked iPhone 5 model "A1429 CDMA"? Need a quick reply please ..

Does the Canada ONLINE Apple store sell the unlocked iPhone 5 model "A1429 CDMA"? Need a quick reply please ..

http://www.apple.com/iphone/LTE/

Can't activate iPad after getting it from repair. Need help quick!

I recently broke the screen of my iPad but the hardware was working very well. Today I got it back from the repair service I gave it to (not Apple store), and when I turn on the iPad, it tells me to activate the iPad using my Apple ID, I enter all my info correctly, but it doesn't unlock. Did they give me a wrong iPad, did I get scammed? Please I need help quickly since I will be leaving the town after 3 days. Thanks for any help

Do you have the serial number of the iPad you purchased & sent in for repair? If so, look on the back/bottom of the iPad to see the serial number of the iPad you have. Does it match?
 Cheers, Tom

How can I send a copy of my Keynote Presentation to someone else so that it will include my slide notes (uploading it to iWork seems to exclude my notes and only shows the slides). A quick response would be greatly appreciated!

How can I send a copy of my Keynote Presentation to someone else so that it will include my slide notes (uploading it to iWork seems to exclude my notes and only shows the slides). A quick response would be greatly appreciated!

I'd try Dropbox (http://www.dropbox.com/), which you and your recipient both have to have. It's easy, and the free version would probably be enough. There are any number of other services available for emailing large files (google that). Of course, your recipient must have KN installed to be able to view it correctly, or can view it in PP, but with some loss, primarily transitions/animations.

Need a quick step by step how to use home share to import 500 songs in my Libruary into my little girls libruary

need a quick step by step how to use home share to import 500 songs in my Libruary into my little girls libruary; her birthday is today - my five min action item has had me up since 2am - help me not be a failure today

Hi there,
So, is your daughter's library on a separate computer and running on the same Wifi as yours? Just need to establish the scenario.
Cheers,
GB

Need a quick help on Pro*C

Hi All,
I need a quick help on Pro*C. Here's the details on the same:
- My program takes one input file as parameter. Lets assume argv[2] is the name of the inputfile, which is my input parameter as well.
- ps_filename = argv[2]; I'm copying argv[2] i.e. filename in a variable called ps_filename
- Now this inputfile can be of two types, say type A_yyyymmddhhmmss.dat and B_yyyymmddhhmmss.dat.
- Therefore for every run I'll have one of this value as input parameter which will be copied into the ps_filename.
- Now I need to call two different functions based on the inputfile i.e. if ps_filename like 'A%' then call func A() else call func B();
But in ProC/C there is no provision to use like operator.
Therefore my question is how can I have ps_filename like 'A%' in C?
Can anyone please help me to solve this issue?
Hope to get your co-operation.
Thanks & Regards,
Debabrata

debabratas wrote:
Therefore my question is how can I have ps_filename like 'A%' in C?Hello, why don't you just substring on the first character, and if that's an 'A', then LIKE 'A%' will also hold.
For example, in Pro*C:
if (substr(ps_filename,1,1) == 'A') {
..

I need a quick response

Similar Messages

Maybe you are looking for