I need a recommendation for a good exe generator sowtware

I need to convert java files to executable program, I once used a great program which does that but I don't remember the name. I would like to get some names from you.
Thanks
Meir.

Usually I don't need it,but now I need it for a simple application that needs to work without the virtual machine. I remember that I used to have such a software and I'm trying to figure out what was it.

Similar Messages

I need a recommendation for a good word processor

i have two macs at home which are fully converted to pages and keynote. my family has now fully converted from using clunky office 2004 to iwork. i bought a used ibook g3 for $275 and i thought i could use it for writing essays at school. and its pretty light at 4.9lbs after all (well it's the lightest mac around). i installed iwork thinking it could run smoothly. i found out that when i begin typing, the words take forever to print on the screen. it gets even slower while moving paragraphs around. so now i thought i would have to run word 2k4. that's no problem since i have been used to using word for years. well, as a matter of fact, i can't stand word one bit. pages is just so much better and cleaner, i simply can't take the user interface MS has built. since i am on a 12in screen, the Word window is awkward and clunky. so, i am now thinking of getting appleworks, but that software is older than panther, so i dont know how powerful it really is.
if anyone can recommend me a good app for just writing essays, please tell me. is there a way to make pages run faster, or make word look better? thanks, gabe.
what i am doing now is using word to type and copying everything to pages so it can be formatted better. its pretty slow, annoying but it gets the job done.

Welcome to Apple Discussions
For your G3 iBook, I recommend AppleWorks 6. You should have received the original disks with that iBook & those disks include AppleWorks. If you didn't get them & can't get them from the seller, you could call Apple & ask for a replacement set of original disks. There will be a small charge, but I'd consider it worthwhile just to have a set of the originals. If you want to buy AppleWorks 6, try eBay and do a search for "AppleWorks" or "Apple Works" (some people put a "space" in the name).

I need a recommendation for a 24" monitor for my late 2013 MacBook Pro

I need a recommendation for a 24" professional photography monitor for my late 2013 MacBook Pro. I am looking for a monitor that plays well with my 13" late 2013 Macbook pro. I tryed the Dell U2413 and found after the fact that it did not work well with my Macbook pro. Read up on the Asus PA 249Q, It also seems to have problems with my Macbook Pro. Apple display is larger than i want. Looking for recommendations for compatable IPS monitor for use with Aperture. buget is $300 to $800.
Anybody happy with thiers?
MacBook Pro with Retina display, OS X Mavericks (10.9), Aperture 3.5.1

Any monitor will work. Decide what specs work best for your needs and get that monitor.

Bought a flight simulator and would like to use a joystick. Need a recommendation for a Mac Air compatible joystick.

Bought a flight simulator and would like to use a joystick. Need a recommendation for a decent device compatible with a MacAir.

Thanks, Sig. I think I should've been a little clearer. I've attempted to do the updates on my Mac, but I get a warning that it will erase everything except calenders, email, etc from the iPad. I've syned the iPad with the Mac with no problem, but get scary messages when I try to do the latest update.

Need a recommendation for the best LP turntable to transfer lps to iTunes library...recieved a SONY that is recommended for windows only. Have a brand new SONY ps-lx300USB recieved as a gift that only says they will not guarentee results w/ mac.Help.

Need a recommendation for the best LP turntable to transfer lps to iTunes library...recieved a SONY that is recommended for windows only. Have a brand new SONY ps-lx300USB recieved as a gift that only says they will not guarentee results w/ mac. Please Help.

Just use that turntable with -> Audacity

Need a recommendation for an external Cd drive for iMac intel

Need a recommendation for an external Cd drive for iMac intel

Welcome to Apple Support Communities
Any external optical drive will work, so you can purchase the one you most like. Have a look at OWC to see some optical drives > http://eshop.macsales.com/shop/firewire/optical-drives/

Need Bapi Names for Post Goods Reciept and Post Goods issue to STO in MIGO

Hi All..
I need to post goods receipt using input data in MIGO. Is there any BAPI that i can use.
Also once STO (Stock Transport order) is created, i also need to Post goods issue to STO in MIGO transaction. I do need a bapi for this too...
Appreciate your help and will reward any helpful answers.
Thanks..

Hi,
ata : gm_header type bapi2017_gm_head_01.
data : gm_code    type bapi2017_gm_code.
data : gm_headret type bapi2017_gm_head_ret.
data : gm_item    type table of
        bapi2017_gm_item_create with header line.
data : gm_return type bapiret2 occurs 0 with header line.
data : gm_retmtd type bapi2017_gm_head_ret-mat_doc.
clear : gm_return, gm_retmtd. refresh gm_return.
gm_code-gm_code      = '03'.
gm_header-header_txt = firstscreen-bktxt.
    gm_header-pstng_date = sy-datum.
    gm_header-doc_date   = sy-datum.
    gm_header-ver_gr_gi_slip = ' '. "print
    gm_code-gm_code      = '03'.
move lineitem1-bwartwa to gm_item-move_type     .
      move lineitem1-matnr to gm_item-material.
      move lineitem1-erfmg     to gm_item-entry_qnt.
      move 'EA'    to gm_item-entry_uom.
      move lineitem1-werks to gm_item-plant.
      move lineitem1-lgort to gm_item-stge_loc.
      move lineitem1-kostl to gm_item-costcenter.
      while gm_item-costcenter+9(1) = ' '.
        shift gm_item-costcenter right.
      endwhile.
      overlay gm_item-costcenter with '0000000000'.
      append gm_item.
call function 'BAPI_GOODSMVT_CREATE'
       exporting
            goodsmvt_header = gm_header
            goodsmvt_code    = gm_code
       importing
            goodsmvt_headret = gm_headret
            materialdocument = gm_retmtd
       tables
            goodsmvt_item    = gm_item
            return           = gm_return.
Thanks
venki

I need a recommendation for SAN (Actually NAS) ethernet switches.

Hi, we have one Dell blade chassis with 8 servers ---- connected to stacked switches (3750) with EtherChannels ---- to NetApp (Controller 1 and 2 accordingly). Unfortunately, Dell blade servers only supports 1Gbps for port and NetApp also supports 1Gbps for each port (ports are all ethernet, not FC)
Questions
1) What kind of switch do you recommend? I know that it is not popular to use ethernet in SAN I just recognized that we have NAS, what do you recommend switches for NAS?
not SAN, so any MDS 9000 series don't work because it supports limited ethernet ports (many FC ports). I need many ethernet ports at least 48 ports from each switch. I know Nexus is one of candidates, but want to double check.
2) Most of vendors ask what kind of connection I have. I said usually just ethernet, not FC, not FCoE. Is it right? I believe that since I found NAS, it is "Ethernet"
3) The reason that I am looking for different switches is there are huge packet dropped (outbound) in switches (outgoing toward both dell servers and netapp; incoming is ok) We recently moved PtoV so, it is possible that traffic volume was increased. But output doesn't give me lot of information like below. Do you have any recommendation for further t-shoot?
(connected interface to Dell)
GigabitEthernet2/0/34 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 580a.20f1.db22 (bia 580a.20f1.db22)
Description: Chassis8
MTU 9000 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:57, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 32453861
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 3853000 bits/sec, 364 packets/sec
5 minute output rate 2275000 bits/sec, 368 packets/sec
15864561667 packets input, 16858567695886 bytes, 0 no buffer
Received 4347 broadcasts (6 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 6 multicast, 0 pause input
0 input packets with dribble condition detected
47326292220 packets output, 62942914503089 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures
(connected to NetApp)
Port-channel2 is up, line protocol is up (connected)
Hardware is EtherChannel, address is 2c3e.cfaa.af03 (bia 2c3e.cfaa.af03)
MTU 9000 bytes, BW 3000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 2/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is auto, media type is unknown
input flow-control is off, output flow-control is unsupported
Members in this channel: Gi1/0/3 Gi2/0/1 Gi2/0/2
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 3316452
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 6693000 bits/sec, 2048 packets/sec
5 minute output rate 30028000 bits/sec, 2773 packets/sec
107334585357 packets input, 140120529103340 bytes, 0 no buffer
Received 5609191 broadcasts (407218 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 407218 multicast, 0 pause input
0 input packets with dribble condition detected
38961062194 packets output, 40437523739199 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Thanks.

Hi, we have one Dell blade chassis with 8 servers ---- connected to stacked switches (3750) with EtherChannels ---- to NetApp (Controller 1 and 2 accordingly). Unfortunately, Dell blade servers only supports 1Gbps for port and NetApp also supports 1Gbps for each port (ports are all ethernet, not FC)
Questions
1) What kind of switch do you recommend? I know that it is not popular to use ethernet in SAN I just recognized that we have NAS, what do you recommend switches for NAS?
not SAN, so any MDS 9000 series don't work because it supports limited ethernet ports (many FC ports). I need many ethernet ports at least 48 ports from each switch. I know Nexus is one of candidates, but want to double check.
2) Most of vendors ask what kind of connection I have. I said usually just ethernet, not FC, not FCoE. Is it right? I believe that since I found NAS, it is "Ethernet"
3) The reason that I am looking for different switches is there are huge packet dropped (outbound) in switches (outgoing toward both dell servers and netapp; incoming is ok) We recently moved PtoV so, it is possible that traffic volume was increased. But output doesn't give me lot of information like below. Do you have any recommendation for further t-shoot?
(connected interface to Dell)
GigabitEthernet2/0/34 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 580a.20f1.db22 (bia 580a.20f1.db22)
Description: Chassis8
MTU 9000 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:57, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 32453861
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 3853000 bits/sec, 364 packets/sec
5 minute output rate 2275000 bits/sec, 368 packets/sec
15864561667 packets input, 16858567695886 bytes, 0 no buffer
Received 4347 broadcasts (6 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 6 multicast, 0 pause input
0 input packets with dribble condition detected
47326292220 packets output, 62942914503089 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures
(connected to NetApp)
Port-channel2 is up, line protocol is up (connected)
Hardware is EtherChannel, address is 2c3e.cfaa.af03 (bia 2c3e.cfaa.af03)
MTU 9000 bytes, BW 3000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 2/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is auto, media type is unknown
input flow-control is off, output flow-control is unsupported
Members in this channel: Gi1/0/3 Gi2/0/1 Gi2/0/2
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 3316452
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 6693000 bits/sec, 2048 packets/sec
5 minute output rate 30028000 bits/sec, 2773 packets/sec
107334585357 packets input, 140120529103340 bytes, 0 no buffer
Received 5609191 broadcasts (407218 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 407218 multicast, 0 pause input
0 input packets with dribble condition detected
38961062194 packets output, 40437523739199 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Thanks.

Need help searching for a good IDE...

I've been looking for a good Java IDE that is somewhat comparable to Visual Studio 2003 regarding parameter info helpers and syntax highlighting, with an thought of visual design too. Does Sun have an IDE similar to VS? Seems like I came across one of their products a few weeks ago. If not, do you know any free IDEs that have these features?

I think NetBeans (see www.netbeans.org) is thebest:
- code completion
- sintax highlighting
But not spell checking. If you refer to Java spell checking, or typos, it does. If you refer to a language like Italian, English... it doesn't.
>
- internal support for Web/J2EE applications
development and testing
- automatic JUnit tests creationIt writes the tests for you?Yes, it writes tests skeletons (the test bodies must be written...)

Recommendations for a good spectrum/frequency analyzer

Hello looking for a good spectrum/frequency analyzer AU plug-in
Many thanks Fatal Movez

It's not a plugin, and it's expensive, but possibly the best thing out there is SpectraFoo.
Even though it's not a plugin, it works fine with Logic via SoundFlower.
At the other end of the price scale, there is Blue Cat's FreqAnalyst, a free plugin. But I'm not sure if it shows you a lot more than what you can already see in Logic's MultiMeter. I wonder if you've tried that?

Font Book in 10.7 is retarded. I need recommendations for a good font manager for OSX

On our 10.5.8 G5, I'm using Extensis Suitcase.
Our new Mac Pro is running 10.7 and I need to install fonts, but Font Book seems to cry about just about every font I want to install. So, where are the best font managers for OSX as of right now? Is Extensis still the best? Thoughts? Thanks,
Chris

I know what your're talking about. I used to do phone support for an ISP.
Anyway, this last one that has me up in arms says this:
"1 serious error was found. Do not use this font."
This is in the Font Validation window when I try to install into Font Book. It shows the font name "Serpentine-Bold-Bold.ttf" in the window with an expand triangle to the left. To the far right is a red circle with a white X in it. Ahh screw it, here's a screenshot....
This font works perfectly fine on our G5 running 10.5.8

Recommendation for a good "TO DO" app for Desktop/iPhone sync

HI,
Can someone please recommend a good app for syncing desktop to iphone to do list.
Thank you.

There is a nice free application that I use. It is Zenbe Lists. It actually syncs with a free web account that can be accessed from your desktop. Maybe not what you're looking for, but what do you have to lose if it's free? Good luck!

I need a recommendation for the best 360-degree software

I use Stitcher for stitching images into 360-degree interactive quicktime imagery, but the upgrade is costly ($250+).
Can anyone recommend other good software which will do the same?
Trying to finish a project ... feedback is most welcome.
Thanks!

Stitcher is what I went with. Thanks

Need tablet recommendation for use with CS6 and a Mac Mini

Hello all,
I'm running CS6 on a Mac MIni with OS X 10.8.3. I want to start learning graphic design entry on Illustrator and Photoshop and all I've read indicates use of a tablet is de rigueur. Can anyone recommend a medium to top-end tablet that is compatible with the Mac Mini and CS6? Apple's site only shows the Wacom Bamboo Splash tablet but doesn't give any hint whether it would work with the Adobe tools.
Thanks,
Kevin H.

Actually it depends on how you like to work and what exactly you're after.
Illustrator can be used with a mouse only when you do just construction work, like using the shape tools, the pen tool, pathfinder functions, transformations and all those other tools that serve the need for exact results.
In case you'd like to draw stuff intuitively like doing water color, calligraphy, sketching then you would definitely need a tablet.
A tablet can also replace a mouse in case you want to reduce a strain on your hand, arm and fingers. Some people prefer styluses in this case.
Is any of these the case for you?

Need a recommendation for Mac music management program

Can anyone recommend a good music management program for the Mac that will allow me to tag and rename all my mp3 files in bulk mode? Thank you.

Search one of the compendium sites such as MacUpdate for "MP3 tag". You'll find a number of possible options, one of which may work for you.
Regards.

I need a recommendation for a good exe generator sowtware

Similar Messages

Maybe you are looking for