I need a report in SAP which allows multiple Profit centers selection with

Hi,
    Cany anybody help me with below issue -
I need a report in SAP which allowing multiple Profit centers selection with :
- Profit Center #
- Profit center Name
- Profit center long text
- Profit Center group
- the related PC node showing the BU and the product category group.
Let me know is there any report which can provide us with all this details.
With regards.

Hi,
I recommend the PCA standard drill-down or interactive reports accessible via the follwoing menu path:
Accounting --> Enterprise Controlling --> PCA --> Infosystem --> Reports for PCA
There are several reports which allow entering profitcenter groups or profitcenters.
Long Text is not possible. Makes also no sense to report on Long Text.
Best regards,
Andreas

Similar Messages

  • Need Consignment report in SAP

    Hello all MM Gurus,
    Is there any report in SAP that shows the total consignment stock arrival and consignment stock consumption in a given plant. The report should show the consignment stock arrival/consumption, value of the stock, material number, etcetc.
    Please let me know. I have suggested my user that we can use MB51 or MB54. But I am afraid, my user would get confused if he/she uses these transactions. Hence, I need a report in SAP that is particularly made for consignment stock.
    Thanks and Regards,
    Umakanth
    Moderator message: we are the ABAP gurus, please have a look in the ERP MM forums.
    Edited by: Thomas Zloch on Nov 26, 2010 2:20 PM

    Hi,
    I recommend the PCA standard drill-down or interactive reports accessible via the follwoing menu path:
    Accounting --> Enterprise Controlling --> PCA --> Infosystem --> Reports for PCA
    There are several reports which allow entering profitcenter groups or profitcenters.
    Long Text is not possible. Makes also no sense to report on Long Text.
    Best regards,
    Andreas

  • I need to build an executable which allows all the VIs to be viewed as if in LabView

    I hope I am not being stupid but I need to build an executable which allows all the VIs to be viewed, opened - closed, as if being interpreted by LabView 8.5. The system is a simulator and I am required to allow the system to be inspected for correctness whilst running. Further, interactive panels exist at various locations throughout the structure and they must all work.
    Can somebody tell me how to do this or provide me with some pointers?
    Ideally I would like the navigation to be the same as if the code was being operated within LabView then the same idiots guide, I’ll need it in two years, will work for both the exe and the interpreted versions. The target machines will not run LabView and simply distributing the VI tree would be very bad news because it would allow erroneous edits to break the system.
    Thanks in advance

    Mike
    Sorry I may not have expressed myself well.
    I have developed the system in LabView 8.5 and I now want to release it to be installed on machines without LabView. I can do that, however I have a problem. I am required to allow the internals (the source) of the system to be visable; I don’t know how to do that without LabView on the machine. Yes, I know I could produce PDFs for all 1500+ VIs but I don’t want to do that and the customer does not want it eather; he wants to navigate the model and check what he finds.
    I hope this makes my requirements clearer.
    Thanks
    Frank

  • Crystal reports 2013 , SAP MDX Driver not able to connect with BW BEX Query

    Hi All,
    We just installed Crystal 2013, and want to create crystal report on SAP BW CUBE/BEX Query through SAP MDX Driver.
    1.When start connecting through SAP MDX Query option from new connection , SAP Systems which are in SAPLOGON are not appearing in initial screen. where as from OLAP Connection we are able to connect to SAP BEX Query.
    2.Even from SAP Tool kit we are not able to connect to BEX query, we are getting ERROR MESSAGE.
    and we are using SAP BI BO PLATFORM 4.1 sp01 .
    Please suggest me , if I am missing any configuration settings.
    Regards,
    Joseph

    Hi Joseph,
    Before you start building the report, make sure the right transports have been loaded on the SAP System. The right Transport files are the ones found inside the installation zip you download from SAP's server. They're under the "Collaterals\Add-Ons\SAP\Transports" folder.
    For more info on Transports, authorizations etc, please have your BASIS admin go through this wiki:
    Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
    To resolve your first issue, please follow the steps from this thread:
    Problems with SAPLogon.ini for SAP GUI and Crystal 2011
    P.S: Crystal Reports for Enterprise 4.1 does a better job at handling BEx queries that the CR 2013 designer. It directly connects to BEx queries via the BICS connectivity driver and doesn't need the Transports to be there on the SAP System. You might want to give this flavour of CR a try too.
    -Abhilash

  • Crystal reports 2008  will not allow multiple exports in a row

    I recently had service pack 3 and fix pack 3.3 updated to my system ( crystal 2008) to help correct a issue with mapi not populating addresses from outlook when trying to export a report.  I have a new issue. - sort of???
    Now when I try to export multiple reports in a row I still have the same issue. I can send 1 report out. But if i try to send another report out i have the same issue that I had with  mapi not populating the addresses field from outlook.
    To get past this I shut down crystal and then bring it back up and I can send (ONE) report again before the same thing happens. Does anyone know if there is  fix for this issue?

    Im not sure I agree with you designation that this report should be in the report DESIGN forum.  I
    My problem has nothing to do with report design in my OP.  The MAPI function (in crystal reports itself) will not populate addresses once I export 1 report.  When I try to export a second report that is when it quits works.  This is basically the same problem that a hot fix or fix pack corrected but now instead of now working at all. I can only export 1 report before the same mapi issue happens????

  • I need a control which allows a user to choose from specific values (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2 fro

    m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.I need a control in Labview which allows a user to choose from specific values (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2 from a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a con
    trol like this is not available.

    m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.> I need a control which allows a user to choose from specific values
    > (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2
    > from a listbox, and then change the value on the block diagram, but
    > what I want is that on the subvi node itself he can enter the actual
    > values, say 1, 10, 200. Does anyone know how to do this, creatively,
    > since currently a control like this is not available.
    >
    One way of doing this is to use either a ring or enum where the strings
    presented to the user are "1", "10", or whatever you like. On the
    diagram, the values will be 0, 1, 2, in a compact counting sequence.
    Then do an array index into a constant. If this is done more than one
    place, make the control a typedef so you can keep them consistent an
    d
    make the index be done in a subVI. Then whenever you need this, you
    drop the control and the subVI, out comes the integer, float, or
    whatever it is you want to index.
    Greg McKaskle

  • Report in SAP -cost of the material in different periods

    Hi,
    Is there a standard report in SAP which will give me the cost of the material in different periods.
    The issue is the material price is changed frequently for a perticular material "X''. I want to have a look at the cost of material in different periods.
    I can track the changes from MM03,but the user needs a feasible solution than this.
    Thanks
    Aravind

    Hi,
    I got the required from MBEWH table.
    Thanks
    Aravind

  • Planned Order to Purchase Order report in SAP

    Dear All
    The Business process is Planned Order - Converted to Purchase Requsition - Converted to purchase order .
    Is there any report in SAP , which shhows the direct link between Planned order to Purchase Order ?
    Regards
    Shyam

    I have never seen a standard report, build a query based on tables PLAF, EBAN and EKET should be involved

  • Standard report in SAP to see the Purchase Order and corresponding PR

    Dear All.
    Is there any Standard Report in SAP , which can provide details of the Purchase Order and the corresponding Purchase Requsition.
    Regards
    Shyam.

    Hi
         ME2L     Purchasing Documents per Vendor
         ME2M     Purchasing Documents per Material
         ME2K     Purchasing Documents by Account Assignment
         ME2W     Purchasing Document by Supplying Plant
         ME5A     List Display Of Requistions
         ME2W     Purchasing Document by Supplying Plant
                        ME80FN     General Analysis of Purchasing Documents

  • Un-reconciled Report within SAP

    Hello,
    I am wondering if there is a standard report within SAP which shows all un-reconciled transactions for a particular bank as of a certain date?
    I have tried running the following: Banking  Bank Statements and External Reconciliation  Manual Reconciliation. However this doesn't appear to give me what I want.
    Regards,
    Juan

    Hi Juan,
    Do you want to see unreconciled transactions on a GL/bank account or transactions on a bank account?
    Unreconciled transactions can be viewed on the GL's account balance.
    If you want to see the transactions that have gone thru on a bank account, you would use the External Reconciliation as you indicated. You would select the transactions that are showing on your bank statement; the remaining entries are the outstanding entries that have not gone thru that bank account.
    Heather

  • Crystal reports over SAP r/3 tables

    I am trying to write a Crystal report over SAP r/3 tables (BSIK and LFA1) with no success.
    I have CRpts installed along with the "client side" SAP integration kit.  When i try to create a new connection to my development ERP system i am asked to select an available system, but the dialogue box is empty.   I can however connect to a SAP BW query successfully using the SAP toolbar that has been added when installing the integration kit.
    Is there anywhere a set if instructions to successfully install and configure CRpts to report over SAP r/3 tables ?
    Andrew Fox

    Make sure to define an environment variable called SAPLOGON_INI_FILE in the system your CR designer is installed on. The variable should contain the path to your SAPlogon.ini file including the file name. eg if saplogon.ini is found under c:\Windows then the variable shoud be set to c:\Windows\saplogon.ini . Restart the CR designer and try again.
    If the system list remains empty then locate to saplogon.ini file, open it using Notepad and choose the Save as option. All you have to do is to overwrite the existing file (ie. do not change the name) after changing the encoding to UTF-8 (drop-down list at the bottom of the Save as window)
    Regards,
    Stratos

  • HT5910 Help me find a program that will allow me to tag files with color over file name and not just a small dot that is not easy to see.

    Need help to find program that allows me to relabel files with a bold color that is easy to recognize and not just a small nearly invisible dot at the end of the line.

    That's one of the many features in the feature-packed "Finder Sustitiute" file brower program, Path Finder, by CocoaTech . It's extremely powerful, with enhanced searching, file list filtering, and batch file operations. It also has an amazing preview mode for most all file types. 

  • Why we need ABAP if we can connect With Crystal Reports to SAP R/3

    Hi,
        I am new to Crystal reports.I came to know that we can connect SAP R/3 by using SAP InfoSet,SAP Table Cluster and Function connectivity in Crystal Reports.So we can generate reports for SAP R/3 database with out need of ABAP.So why we need to go ABAP module.Is there any disadvantages if we dont use ABAP to generate reports or we can use always Crystal Reports to generate Reports for R/3 database?

    Hi,
    it is correct that you can built a Crystal Report without the need to use ABAP, but we have lots of customers that have invested over the years into ABAP Routines and Crystal REports is able to leverage those as well. So with Crystal Reports you have the choice to leverage existing ABAP Functions as a source for reporting - which might help to leverage complex processing on the backend - or to use InfoSets and tables.
    regards
    Ingo

  • Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

    Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
    no firewall at all, in win 8.1, turned it off for all networks
    ftp and publish works just fine

    Hi,
    Please take a look at this post : Re: Adobe Muse - Preview Failed
    Regards,
    Aish

  • I have a 2T apple time capsule and router. I bought a Hauppauge WinTV extender which allows regular TV to be broadcasted on a PC. The program allows streaming to a Mac or iPad, iPhone, etc. I need to open a port on the router to allow this to work.

    I have a 2T apple time capsule and router. I bought a Hauppauge Win TV extender which allows TV to be broadcasted on a PC. The program allows for the TV to be streamed on a Mac, Iphone, Ipad. I need to access the router set up options to open a port on the router to allow this program to stream the TV to the Mac and Iphone. I do not know how to access the apple time capsule router to change the settings to open a port on the router. help please.

    Firstly you do not need to open ports to stream locally.. there is no port block in local LAN.. only WAN to LAN. So there is a good chance it is not needed at all..
    Opening ports on the TC I strongly recommend a v5 airport utility.. you can download one for windows if you don't have a Mac.. iOS version of the utility I am not sure but it will not work to do complex things.
    In the v5 utility go to the NAT area, and click on port mappings.
    Sorry I don't have a screen shot at the moment of the actual mapping page.. but simply put the IP of the device you want opened and the port.
    There are plenty of posts with this info if you google.
    But as noted.. this is purely WAN to LAN.. nothing else.

Maybe you are looking for